494939
30
Zoom out
Zoom in
Previous page
1/40
Next page
Setting up the analogue controller
26
The audio inputs should be connected using high-quality
screened cable, taking care to connect the left and right
channels correctly.
To connect to a tape recorder
Connect the analogue output from the tape recorder to the
TAPE 1 input on the analogue controller (or another input if
you prefer).
Connect one of the TAPE OUT outputs from the analogue
controller to the analogue input on the tape recorder.
Note that the two tape outputs are of opposite phase, allowing
them to be used in conjunction as a high quality balanced feed
for a tape deck or the second room in a two-room system.
To connect to other Meridian 500
Series equipment
Connect one of the COMMS sockets on the back panel of the
analogue controller to one of the COMMS socket on another
500 Series unit, using the 500 comms lead provided with the
other unit.
The sequence in which you connect the units is not important.
COMMS COMMS
Then configure the units with the following automatic setup
procedure:
Switch all the units to standby.
Press Clear on the remote.
Each unit will display:
Auto
One unit will then be designated
as the controller, and display:
Con.
This is the unit that will respond to the remote.
All the other units will be configured
as non-controllers, and display:
N.Con.
Your system is now set up and ready for use.
30


Need help? Post your question in this forum.

Forumrules
1

Forum

meridian-502

Reset search

  • My Meridian 502 preamp has no power. I have replaced fuse and still no power. Fuse has not blown. Submitted on 16-2-2022 at 18:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 502 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info