494938
24
Zoom out
Zoom in
Previous page
1/50
Next page
Customising the Control Unit
20
Choosing standard settings
The 501/501V Control Unit provides six alternative standard
settings, called Types, which configure all aspects of the control
unit into the six most commonly needed configurations.
Choosing one of the six standard settings overrides any other
configuration you may have performed, and so can be used to
reset the configuration of the control unit.
By default, the control unit is supplied set to Type 1.
If you have a system containing only Meridian 500 Series units
then you should choose one of Types 5, 1, 4, or 3. These give
progressively larger numbers of inputs, as shown in the tables
on page 21 (501) or page 22 (501V).
If your system includes any Meridian 600 or 200 Series units you
should choose Type 2 or Type 6. For more information see To
connect to Meridian 600 or 200 Series equipment, page 38.
To select a standard setting
Switch off any power amplifiers that are connected to the
control unit.
Turn off the control unit, using the power switch on the back
panel.
Turn on the power again while holding down the Off key on
the front panel.
The display will show:
Type
It will then show:
Ty 1
Press
VV
VV
V or
AA
AA
A to change the type number.
For example, to select Type 3
the display shows:
Ty 3
Turn off the control unit using the power switch on the back
panel.
Turn on again to use the standard settings you have selected.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 501 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info