519104
129
Zoom out
Zoom in
Previous page
1/139
Next page
125
When the saddle is in the perfect position,
tighten the bolt or the seat tube binder bolt
gradually in half-turn increments, while
checking whether the seat post is sufficiently
tight after each half-turn. For this purpose,
take hold of the saddle at both ends and try
to turn it. If it does not move, the seat post is
firmly seated.
Do not overtighten the bolt or the seat post
binder bolt. Overtightening may cause a seat
post failure, resulting in a crash and injury
of the rider.
28.5.3 Adjusting the position and angle of
the saddle
Single-bolt clamping
With a released fixing bolt, the saddle can
be pushed back and forth and be adjusted in
the angle. Tighten the fixing bolt so that both
clamps are in contact with the saddle rails as
soon as the saddle is in a perfect position.
Never exceed the recommended torque.
Double-bolt clamping
Release the fixing bolt you can reach from
below and push the saddle back and forth
to adjust the horizontal saddle position. To
adjust the saddle angle, use the second fixing
bolt you can reach from the upper side of
the seat post. When the saddle is in a per-
fect position, tighten the fixing bolts until both
clamps are in contact with the saddle rail.
Never exceed the recommended torque.
After fastening the saddle, check whether it
resists tilting by bringing your weight to bear
on it once with your hands on the tip and
once at the rear end of the saddle.
28.5 Carbon seat post
The seat post must be inserted by at
least 100 mm (120 mm with LRS-
bikes) into the frame. Never ride your bicy-
cle, when the stop mark is visible. In any
case, a deeper insertion depth means more
safety.
129


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida sport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida sport in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info