519104
20
Zoom out
Zoom in
Previous page
1/139
Next page
16
There are other thru axle systems which are
a combination of threaded axle and quick-
release system.
After this, close both quick-release levers
to clamp the axle. Proceed as with regular
quick-releases. From the start of the closing
movement up to about the first half of its trav-
el, the lever should move very easily without
clamping the wheel, whereas over the second
half of its travel the force you need to move
it should increase considerably. Towards the
end of its travel the lever should be very hard
to move. Use a matching Allen key to adjust
the initial tension of the quick-release lever.
Use the palm of your hand while your fingers
pull on an immovable part, such as the fork
leg.
7. How to use the quick-releases
With these systems, the wheel including
brake disc, must be mounted in fork and
brake calliper. Then, the thru axle must be
slided through the drop-out of one fork leg
into the thread of the second fork leg where
it is screwed in. The fold-out screw-in fitting
helps you in doing so.
Do not use any other tools to fix the
axle. A too tight fixing of the axle can
damage the axle or the fork leg.
In any case make yourself familiar
with the user manual of the according
fork manufacturer.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida sport at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida sport in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info