657612
17
Zoom out
Zoom in
Previous page
1/92
Next page
17
e
f
g
h
2. Check that handlebars and stem are neither bent
nor broken and that they are level and upright. Make
sure the stem is firmly fixed on the fork by trying to
turn the handlebars relative to the front wheel
(e)
.
Briefly lean on the brake levers/shifters to make
sure the handlebars are firmly fixed in the stem.
Realign the components, if necessary, and gently
tighten the bolts
(f)
to ensure a reliable clamping of
the components.
The maximum torque values are printed directly on
the components or specified in the instructions of
the component manufacturers on this MERIDA CD-
ROM.
For more information see the chapters “Adjusting
the MERIDA bike to the rider” and “The headset”
and the instructions of the component manufactur-
ers on this MERIDA CD-ROM.
3. Check whether the chain still runs on the chain-
wheels and the sprockets. If your MERIDA road bike
fell over to the chain side, verify the proper function-
ing of the gears. Ask somebody to lift your MERIDA
road bike by the saddle and carefully shift through
all the gears. Pay particular attention when switch-
ing to the small gears, making sure the rear derail-
leur does not get too close to the spokes as the chain
climbs onto the larger sprockets
(g)
.
If the rear derailleur or the drop-outs/derailleur
hanger is bent, the rear derailleur may collide with
the spokes. This in turn can destroy the rear derail-
leur, the rear wheel or the frame. Check the function
of the front derailleur, as a displaced front derailleur
can throw off the chain, thus interrupting the drive of
your MERIDA road bike.
For more information see the chapter “The gears”
and the instructions of the component manufactur-
ers on this MERIDA CD-ROM.
4. Make sure the saddle is not twisted by using the top
tube or the bottom bracket shell as a reference
(h)
.
If necessary, open the clamping, realign the saddle
and retighten the clamping.
For more information see the chapters “Adjusting
the MERIDA bike to the rider” and “How to use
quick-releases and thru axles” and the instructions
of the component manufacturers on this MERIDA
CD-ROM.
5. Let your MERIDA road bike bounce on the ground
from a small height. If there is any rattling, see
where it comes from. Check the bearings and bolted
connections, if necessary. Tighten them slightly, if
necessary.
6. Finally, take a good look at the whole MERIDA road
bike to detect any deformations, color changes or
cracks.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Road Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Road Bike in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida Road Bike

Merida Road Bike User Manual - German - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info