657614
74
Zoom out
Zoom in
Previous page
1/129
Next page
74
a
b
c
d
If you face any problems during the test, contact your
MERIDA dealer.
G
Adjusting the headset requires a certain
amount of experience and should therefore
be left to your MERIDA dealer.
Threadless headsets – Aheadset
®
This headset system is characterized by the fact that the
stem is not in the fork steerer tube but clamps it from
outside. Hence the stem is an important constituent part
of the headset, clamping it therefore also sets the adjust-
ment. You generally only need one or two Allen keys
and a torque wrench to adjust an Aheadset
®
.
Release the clamping bolt(s) located on the side of the
stem by one to two turns
(a)
. Gently tighten the counter-
sunk adjusting bolt on top a little, e.g. by a quarter turn
(b)
, by using an Allen key.
Align the stem so that the handlebars are not slanted.
Make sure the front wheel is in line with the top tube and
the stem. Tighten up the stem clamping screws. Use a
torque wrench and never exceed the maximum torque
values! You will find the prescribed values in the chapter
“Recommended torque settings”, directly on the com-
ponents and/or in the operating instructions of the com-
ponent manufacturers on this MERIDA CD-ROM.
Check the headset for play as described above
(c)
. Take
care not to tighten the bearing too much, as this could
easily destroy it.
G
Bear in mind that by overtightening the bolts
the stem can crush the steerer tube. In par-
ticular, models with a carbon fork steerer
tube react very sensitively to overloading as a result
of overtightening the shaft clamp at the stem. Risk of
breakage! Make sure the clamping area is absolutely
free of grease when any of the clamping faces is made
of carbon. If, necessary, use carbon assembly paste in
the clamping areas to ensure maximum clamping.
G
Check the secure seat of the stem by taking
the front wheel between your legs and trying
to turn the handlebars and stem relative to
the wheel
(d)
. A loose stem can cause bad accidents.
G
Never change the preloading mechanism in
the inside of the fork steerer tube. Never in-
stall a star nut in carbon fork steerer tubes.
A
Do not overtighten the upper bolt, it only
serves to adjust the headset play.
I
There can be several reasons why the bear-
ings cannot be adjusted. If you are not abso-
lutely sure, ask your MERIDA dealer for help.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info