657614
70
Zoom out
Zoom in
Previous page
1/129
Next page
70
a
b
c
d
Check whether the tire is properly seated by inspecting
the fine witness line on the tire just above the rim edge.
This line should be even to the rim all around the tire.
Starting from the maximum tire pressure you can now
reduce the pressure through the valve to suit your needs.
Please observe the recommended tire pressure range.
G
Tubeless tires may only be mounted on a
UST rim or wheel (Mavic and other manufac-
turers).
Mounting wheels
To mount a wheel follow the reverse procedure of wheel
dismounting. Make sure the wheel is correctly seat-
ed in the drop-outs and accurately centered between
the fork legs
(a)
or the rear and chainstays. Make sure
the quick-release
(b)
and the drop-out safety tabs are
correctly seated. For more information see the chapter
“How to use quick-releases and thru axles”.
If you have cantilever brakes hook up the brake cable
at the brake arm
(c)
. To do this, grip the rim with one
hand and press the brake pads and/or the brake arms
together. In this position the usually barrel shaped nipple
can easily be engaged.
If you have disc brakes, check before mounting the
wheel whether the brake pads rest snugly in their seats
in the brake caliper body. The gaps between the brake
pads and the wheel should be parallel and the wear in-
dicators in their correct position.
Make sure that you push the brake disk between the
brake pads. After mounting the wheel and tightening the
quick-release, pull the brake lever (several times, if you
have disc brakes).
If your bike has a multi-speed hub, verify the proper as-
sembly of the individual components and tension the
chain before tightening the wheel nuts by pulling the
wheel backwards. Verify that the amount of play mid-
way between sprockets and chainwheel is not more
than two centimeters. Make sure there is no excessive
chain slack!
After mounting the wheel and tightening the quick-re-
lease, pull the brake lever (several times, if you have
disc brakes)
(d)
. To do so lift your MERIDA bike off the
ground and spin the wheel with your hand. With the
wheel spinning the rotor should not drag along the brake
caliper or the brake pads and the rim should keep off the
(rim) brake pads.
G
Immediately put back the brake cable of rim
brakes after having mounted the wheel!
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info