657614
43
Zoom out
Zoom in
Previous page
1/129
Next page
43
e
f
g
h
The clamping mechanism or the saddle rails could break
and result in an accident and/or injuries to the rider.
Use a different saddle model or contact your MERIDA
dealer.
If the saddle rails fit into the clamp grooves, slide the
saddle on the seat post and ensure that the clamp is po-
sitioned midway along the total length of the rails
(e)
.
Position the saddle so that its upper surface is parallel
to the ground. Tighten the bolt gradually and make sure
1) the clamping device is still accurately mounted on
the carbon seat post head and
2) the clamp is tightening evenly around each rail.
Once there is uniform hold on both rails, tighten the
bolt gradually with a torque wrench
(f)
until you have
reached the maximum torque value indicated in Newton
meters (Nm) on the seat post.
G
Poorly tightened or loosening bolts can fail.
Risk of an accident!
G
Check the bolts by using a torque wrench
once a month according to the values indi-
cated directly on the components and/or in
the instructions of the component manufacturers on
this MERIDA CD-ROM.
Adjusting the brake lever reach
With most brake systems the distance between the
brake levers and the handlebar grips is adjustable. This
gives in particular riders with small hands the conve-
nience of bringing the brake levers closer to the handle-
bars
(g)
.
On most bikes there is a small adjusting screw near the
point where the brake cable of a cable brake enters the
brake lever unit or at the lever itself. Turn this bolt clock-
wise and watch how the lever adjusts as you do so
(h)
.
Hydraulic brakes are also fitted with adjusting devices
at the brake lever. There are different systems. Ask your
MERIDA dealer for advice or read the instructions of the
component manufacturers on this MERIDA CD-ROM.
When adjusting the lever reach, make sure the first pha-
lanx of the index finger reaches around the brake lever.
Check the proper adjustment and functioning of the
brake system subsequently, as described in the chapter
“The brake system” and in the instructions of the com-
ponent manufacturer on this MERIDA CD-ROM.
G
Make sure you cannot pull the brake levers
all the way to the handlebars. Your maximum
braking force should be reached short of this
point.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info