657614
24
Zoom out
Zoom in
Previous page
1/129
Next page
24
2
Component description MERIDA mountain bike
Stem
Handlebars
Shifter
Brake lever
Headset
Front brake
Rotor
Wheel:
Quick-release/
thru axle
Rim
Tire
Spoke
Hub
Valve
Frame:
1
Top tube
2
Seat tube
3
Down tube
4
Chainstay
Saddle
Seat post
Seat post clamp
Rear brake
Rotor
Front derailleur
Cassette sprockets
Rear derailleur
Chain
Chainwheel
Crank
5
Rear stay
6
Head tube
7
Rear shock
Suspension fork:
I
Fork crown
II
Stanchion tube
III
Lower leg
IV
Drop-out
1
2
3
4
5
6
7
I
IV
III
II
a
b
c
d
For more information see the chapter “The gears”
and the instructions of the component manufactur-
ers on this MERIDA CD-ROM.
4. Make sure the saddle is not twisted by using the top
tube or the bottom bracket shell as a reference
(a)
.
If necessary, open the clamping, realign the saddle
and retighten the clamping.
For more information see the chapters “Adjusting
the MERIDA bike to the rider” and “How to use
quick-releases and thru axles” and the instructions
of the component manufacturers on this MERIDA
CD-ROM.
5. Let your MERIDA bike bounce on the ground from
a small height. If there is any rattling, see where it
comes from. Check the bearings and bolted connec-
tions, if necessary. Tighten them slightly, if neces-
sary.
6. Finally, take a good look at the whole MERIDA bike
(b)
to detect any deformations, color changes or
cracks
(c)
. Ride back very carefully by taking the
shortest route possible, even if your MERIDA bike
went through this check without any problems. Do
not accelerate or brake hard and do not ride your
bike out of the saddle. If you are in doubt about the
performance of your MERIDA bike, have yourself
picked up by car, instead of taking any risk.
Back home you need to check your MERIDA bike
thoroughly. Damaged parts must be repaired or re-
placed. Ask your MERIDA dealer for advice.
G
Deformed components, especially compo-
nents made of aluminum, can break without
previous warning. They must not be repaired,
i.e. straightened, as this will not reduce the imminent
risk of breakage. This applies in particular to the fork,
the handlebars, the stem, the cranks, the seat post and
the pedals. When in doubt, it is for your safety always
the better choice to have these parts replaced. Ask your
MERIDA dealer for advice.
G
If your MERIDA bike is assembled with car-
bon components
(d)
, it is imperative that you
have it checked by your MERIDA dealer af-
ter an accident or similar incident. Carbon is extreme-
ly strong and durable with very low weight, making it
perfect for the production of high-performance parts.
However, one of the inherent properties of carbon is
that possible overstress may compromise the inner
carbon-fiber structure without showing any visible
deformation, as is the case with steel or aluminum. A
damaged component can fail without previous warning.
Risk of an accident!
A
Make it a rule to check the functioning and in
particular the limit stop of the rear derailleur
after a fall or if your MERIDA bike has toppled
over.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Pedelec at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Pedelec in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info