657613
38
Zoom out
Zoom in
Previous page
1/129
Next page
38
a
b
c
d
Conventional stems
Handlebars with conventional stems allow limited ver-
tical adjustment. This is done by moving the stem up or
down inside the fork steerer tube.
Release the expander bolt by two to three complete
turns. The stem should now turn freely inside the fork.
If it does not, release the bolt by tapping it gently with a
rubber hammer
(a)
. With Allen bolts you need to stick
the Allen key into its head first, as it is normally counter-
sunk and therefore impossible to be hit directly.
Now you can move the handlebar/stem unit up and
down as a whole. Be sure not to pull out the stem too far.
The mark on the stem (end, min, max, stop, limit or the
like) should always remain within the tube
(b)
. Setting
the stem to a lower position can only add to your safety!
Realign the handlebars with the front wheel
(c)
. Retight-
en the expander bolt with a torque wrench.
Tighten carefully by approaching the prescribed maxi-
mum torque value in small steps (0.5 Nm increments)
and check the proper fit of the component in between.
Never exceed the maximum torque value indicated by
the manufacturer! You will find the prescribed values in
the chapter “Recommended torque settings”, directly
on the components and/or in the operating instructions
of the component manufacturers on this MERIDA CD-
ROM.
Check the seat of the stem by taking the front wheel be-
tween your legs and trying to turn the handlebars and
stem relative to the wheel
(d)
. If there is movement, you
have to increase the torque value. If the handlebars are
still too high or too low, you can replace the stem. This
can be quite a big job, as it may mean taking off and
remounting all the fittings on the handlebars. Ask your
MERIDA dealer for advice about the different types of
stems.
G
Never ride a MERIDA bike with a stem that
has been drawn out beyond the mark for the
maximum permissible height! Check all bolt-
ed connections and test your brakes before you set off
in an area free of traffic!
a
Never try to unscrew the top race of the head-
set when you only want to adjust the stem, as
you will otherwise alter the bearing play!
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Mountain Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Mountain Bike in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida Mountain Bike

Merida Mountain Bike User Manual - German - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info