657613
33
Zoom out
Zoom in
Previous page
1/129
Next page
33
e
f
g
h
Dismounting wheels
If your bike is equipped with an SR SUNTOUR
Q-LOC-system 15 mm, open the quick-release lever
completely. Apply a little pressure on the counter nut
and turn the counter nut counterclockwise until the ex-
pander releases.
Once you have screwed out completely the thru-axle
thread from the thread of the lower leg, you can remove
the thru axle completely.
i
More information are provided at
www.srsuntour-cycling.com
Shimano E-Thru 12 x 142 mm (rear wheel)
Mounting wheels
If your bike is equipped with a Shimano E-Thru 12 x 142
mm system
(e)
, slide the rear wheel in the rear frame,
mount the rotor in the brake caliper and guide the chain
over the outmost sprocket of the cassette.
Bring the rear wheel into the right position between the
drop-outs and slide the axle with open E-Thru quick-re-
lease lever from the left side through the drop-out and
the hub
(f)
.
As soon as the axle thread engages with the thread of
the right fork leg, close the axle by turning it clockwise.
During the first rotations you should be able to rotate the
thru axle nearly without resistance. Tighten the axle a
little.
Close the E-Thru quick-release lever like a usual
quick-release lever
(g)
.
At the beginning you should feel virtually no resistance
and clamping effect. When the lever is at right angle the
resistance you feel should increase significantly and to-
wards the end you should need even more strength to
close the lever.
If the lever cannot be closed completely, re-open it and
turn the axle a little counterclockwise. Try again to close
the quick-release lever.
Use the palm of your hand to push it in all the way while
your fingers pull on the rear frame, but not on a spoke
or the rotor.
In its end position the quick-release lever should be
tight so that it can no longer be turned. Make sure the
quick-release lever does not stand out to the rear or to
the side. The best position is in parallel to a frame tube.
Dismounting wheels
If your bike is equipped with a Shimano E-Thru 12 x
142 mm thru-axle system, open the quick-release lever
completely. Open the thru axle by turning counterclock-
wise.
Once you have screwed out completely the thru-axle
thread from the thread of the lower leg, you can remove
the thru axle completely
(h)
.
i
More information are provided at
www.shimano.com
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida Mountain Bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida Mountain Bike in the language / languages: English as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida Mountain Bike

Merida Mountain Bike User Manual - German - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info