780510
61
Zoom out
Zoom in
Previous page
1/114
Next page
61
e
f
g
h
Mounting wheels
To mount a wheel follow the reverse procedure of wheel
dismounting. Make sure the wheel is correctly seated
in the drop-outs and accurately centered between the
fork legs or the rear and chainstays. Make sure that the
quick-release and the drop-out catches are correctly
seated
(g)
. For more information see the chapter “How
to use the quick-releases”.
If you have cantilever brakes hook up the brake cable at
the brake arm. To do this, grip the rim with one hand and
press the brake pads and/or the brake arms together. In
this position the usually barrel shaped nipple can easily
be engaged.
If you have disc brakes, check before mounting the
wheel whether the brake pads rest snugly in their seats
in the brake caliper body. The gaps between the brake
pads and the wheel should be parallel and the wear indi-
cators in their correct position. Make sure that you push
the brake disk between the brake pads. After mounting
the wheel and tightening the quick-release, pull the
brake lever (several times, if you have disc brakes).
If your bike has a multi-speed hub, back-pedal, drum or
roller brakes, verify the proper assembly of the individ-
ual components and tension the chain before tightening
the wheel nuts by pulling the wheel backwards.
Verify that the amount of play midway between sprock-
ets and chainwheel is not more than two centimeters.
Make sure there is no excessive chain slack!
After mounting the wheel and tightening the quick-re-
lease, pull the brake lever (several times, if you have
disc brakes). To do so lift your MERIDA bike off the
ground and spin the wheel with your hand. With the
wheel spinning the rotor should not drag along the brake
caliper or the brake pads and the rim should keep off the
(rim) brake pads.
G Immediately put back the brake cable of rim
brakes after having mounted the wheel!
G Remount the brake caliper of hydraulic
rim brakes immediately
(h)
and close the
quick-release! Make sure that the brake
caliper does not touch either the rim or the tire or the
spokes when the wheel turns.
G Before setting off again check that the brake
surfaces and/or rotors are still free of grease
or other lubricants after the wheel mounting.
G Check whether the brake pads hit the ro-
tors or brake surfaces of the rims. Check the
seating of the wheel attachment. Always do
a brake test as described in the chapter “Before every
ride”!
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida KIDS - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida KIDS - 2015 in the language / languages: English as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida KIDS - 2015

Merida KIDS - 2015 User Manual - German - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info