780511
32
Zoom out
Zoom in
Previous page
1/114
Next page
32
a
b
c
d
Adjustable stems
There are various solutions for adjusting the tilt of the
front part of adjustable stems:
Some designs use bolts on the sides of the joint
(a)
, oth-
ers have bolts coming from above or below, and others
again are equipped with additional locking mechanisms
or adjusting bolts.
Ask your MERIDA dealer to explain you both function
and adjustment of your stem or, still better, let him do
that work.
For more information see the chapter “Adjusting the
height of the handlebars” and the instructions of the
component manufacturers on this MERIDA CD-ROM.
G Note that the bolted connections of adjustable
stems and handlebars have to be tightened
to their specified torques. If you disregard the
prescribed values, the handlebars or stem may come
loose or break. Use a torque wrench and observe the
minimum and maximum torque values! You will find the
prescribed values in the chapter “Recommended torque
settings”, directly on the components and/or in the op-
erating instructions of the component manufacturers on
this MERIDA CD-ROM.
a
Keep in mind that readjusting the position of
the stem changes the position of handlebars,
brake levers and shifters. Readjust these
components, as described in the chapter “Adjusting the
tilt of the handlebars and brake levers“.
Stems for threadless systems, the Aheadset®-
system
In the case of MERIDA bikes with Aheadset® headsets
the stem also serves to adjust the bearing preload. If you
change the position of the stem you have to readjust the
bearing play (see the chapter “The headset” and the
instructions of the component manufacturers on this
MERIDA CD-ROM).
The vertical setting range is determined by the interme-
diate rings, also referred to as spacers
(b)
. In the case of
flip-flop stem models
(c)
the stem can be mounted the
other way round to achieve a different handlebar height.
Unscrew the bolt at the top of the fork steerer tube
(d)
which serves to adjust the initial bearing pressure, re-
move the Ahead cap and release the bolts on either side
of the stem by up to three turns. Remove the stem and
spacers from the fork steerer tube. In doing so keep hold
of both frame and fork to prevent the fork from slipping
off the head tube.
You can determine the handlebar height by the arrange-
ment of stem and spacers. Slip the remaining spacers
onto the fork steerer tube above the stem. Adjust the
headset, as described in the chapter “The headset”.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida E-BIKE - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida E-BIKE - 2015 in the language / languages: English as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida E-BIKE - 2015

Merida E-BIKE - 2015 User Manual - German - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info