780509
29
Zoom out
Zoom in
Previous page
1/114
Next page
29
e
f
g
h
Align the saddle with the frame by using the saddle nose
and the bottom bracket or top tube as a reference point.
Clamp the seat post tight again by closing the quick-re-
lease
(d)
, as described in chapter “How to use the
quick-releases” or by turning the seat post binder bolts
clockwise in half turns
(e)
. You should not need much
strength in your hands to clamp the seat post sufficiently
tight. Otherwise the seat post does not match the frame.
Verify in between that the seat post is sufficiently tight
by taking hold of the saddle at both ends and then trying
to rotate the seat post inside the seat tube
(f)
. If it does
rotate, gently retighten the binder bolt of the seat post
clamp by half a turn and do the check again.
Does the leg stretch test now produce the correct result
(g)
? Check by moving your foot and pedal to the lowest
point. When the ball of your foot is exactly above the
pedal center in the ideal pedaling position, your knee
should be slightly bent. If this is the case, the saddle
height is adjusted to the correct height.
Check whether you can touch the ground safely while
sitting on the saddle by stretching your feet to the floor. If
not, you should lower the saddle until you can, at least
to begin with.
G Never apply grease or oil into a seat tube of a
frame made of carbon unless an alloy sleeve
is inside the frame. If you mount a carbon
seat post, do not put any grease on it, even if the frame
is made of metal. Once greased, carbon components
may never again ensure reliable clamping! Use special
carbon assembly paste instead.
G Make sure not to overtighten the binder bolt
of the seat post clamp. Otherwise you may
damage the seat post or the frame. Risk of
an accident!
G Never ride your bike with the seat post drawn
out beyond the limit, maximum, or stop mark
(h)
! The seat post might break or cause se-
vere damage to the frame. In the case of frames with
seat tubes that extend beyond the top of the frame’s top
tube the seat post should be inserted into the seat tube
at least below the bottom of the top tube and below
the top of the rear stays! If seat post and frame require
different minimum insertion depths, you should opt for
the deeper insertion depth.
A If the seat post does not move easily inside
the seat tube or if it cannot be tightened suf-
ficiently, ask your MERIDA dealer for advice.
Do not use brute force!
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida CITY - 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida CITY - 2015 in the language / languages: English as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida CITY - 2015

Merida CITY - 2015 User Manual - German - 119 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info