780500
37
Zoom out
Zoom in
Previous page
1/67
Next page
34
a
b
After adjusting the handlebars you need to adjust the
brake lever/shifter units. Release the Allen bolt at ei-
ther unit. Turn the levers relative to the handlebars.
Sit in the saddle and place your fingers on the brake
levers.
Check whether the back of your hand forms a straight
line with the line of your forearm
(a)
. Retighten the
units with a torque wrench and do a twist test! The
brake levers need not be absolutely tight. In case of
a fall it is an advantage when the brake levers can be
turned.
G Tighten the bolts at the stem
(b)
until the
clamping slots between the stem body and
the faceplate are parallel and identical in
width at the top and at the bottom. Tighten the bolts
evenly and in a cross pattern, i.e. alternately and
gradually, by using a torque wrench to the lower value
of the recommended torque values.
A There are stem models where both bolts (top
or bottom) are tightened on one side first
and then both bolts on the opposite side.
These stems are marked with a separate imprint, such
as “Close Gap” or “No Gap” indicating this specific
feature.
G Note that the bolted connections of stem,
handlebars, bar ends and brakes have to be
tightened to their specified torques. Use a
torque wrench and never exceed the maximum torque
values! You find them in the chapter “Recommend-
ed torque settings” in this translation of the original
MERIDA operating instructions as well as in your com-
prehensive MERIDA user manual, directly on the com-
ponents and/or in the instructions of the component
manufacturers.
Bar ends provide additional ways of gripping the han-
dlebars.
G Be aware that the distance you need to stop
your bicycle increases, when you are riding
with your hands on bar ends. The brake le-
vers are not always within easy reach.
G Never fix bar ends in a vertical position or
with their ends pointing rearwards as this
would increase the risk of injury in the event
of an accident.
g
Do not install mulit-position handlebars
on your MERIDA pedelec. Contact your
MERIDA dealer.
A If you want to mount bar ends to the alumi-
num handlebars of your MERIDA pedelec,
inform yourself in advance whether your
MERIDA pedelec is approved for bar ends. If neces-
sary, contact your MERIDA dealer before mounting.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida 2019 - Ebike-Pedelec-EPAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida 2019 - Ebike-Pedelec-EPAC in the language / languages: English as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida 2019 - Ebike-Pedelec-EPAC

Merida 2019 - Ebike-Pedelec-EPAC User Manual - German - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - Dutch - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - French - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - Italian - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - Spanish - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info