780500
34
Zoom out
Zoom in
Previous page
1/67
Next page
31
e
f
g
h
Make sure the seat of the saddle remains horizontal
(d)
as you retighten the bolt(s). Your MERIDA pedelec
should stand on level ground while you adjust the sad-
dle.
Having found your preferred position, make sure both
clamp halves fit snugly around the saddle rails before
tightening the bolt(s) to the correct torque value as pre-
scribed by the seat post manufacturer.
Retighten the bolt(s) with a torque wrench according to
the instructions of the manufacturer. After fastening the
saddle, check whether it resists tilting by bringing your
weight to bear on it once with your hands at either end
of the saddle.
G Check the bolts by using a torque wrench
(e)
once a month according to the values
indicated directly on the components and/
or in the instructions of the component manufacturers.
G Poorly tightened or loosening bolts can fail.
Risk of an accident!
Clamping with two bolts in line
(f)
: release both bolts
two to three turns counterclockwise, otherwise the
whole assembly can come apart. Move the saddle for-
ward or backward as desired to adjust the horizontal
position. You may have to give it a light blow to move
it. Observe the markings on the saddle rail and do not
go beyond.
Having found your preferred position, make sure both
clamp halves fit snugly around the saddle rails before
tightening the bolt(s) to the correct torque value as pre-
scribed by the seat post manufacturer.
Tighten both bolts evenly
(g)
so that the saddle re-
mains at the same angle. If you wish to lower the nose
of the saddle a little tighten the front bolt clockwise.
You might have to loosen the rear bolt a little as well.
To lower the rear part of the saddle the rear bolt has
to be tightened clockwise and the front bolt to be re-
leased, if necessary. After fastening the saddle check
whether it resists tilting by bringing your weight to bear
on it once with your hands on the tip and once at the
rear end
(h)
.
G Check the bolts by using a torque wrench
once a month according to the values indi-
cated directly on the components and/or in
the instructions of the component manufacturers.
G Poorly tightened or loosening bolts can fail.
Risk of an accident!
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida 2019 - Ebike-Pedelec-EPAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida 2019 - Ebike-Pedelec-EPAC in the language / languages: English as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida 2019 - Ebike-Pedelec-EPAC

Merida 2019 - Ebike-Pedelec-EPAC User Manual - German - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - Dutch - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - French - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - Italian - 67 pages

Merida 2019 - Ebike-Pedelec-EPAC User Manual - Spanish - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info