657617
33
Zoom out
Zoom in
Previous page
1/56
Next page
29
e
f
g
h
Try rotating the handlebars once clamped in the stem
and tighten the bolt a little more, if necessary
(e)
. Use a
torque wrench and never exceed the maximum torque
values! You find them directly on the components and/
or in the instructions of the component manufacturers
on the enclosed MERIDA CD-ROM. If the handlebars are
not tight with the prescribed torque value, use carbon
assembly paste.
After adjusting the handlebars you need to adjust the
brake lever/shifter units. Release the Allen bolt at either
unit. Turn the levers relative to the handlebars. Sit in the
saddle and place your fingers on the brake levers.
Check whether the back of your hand forms a straight
line with the line of your forearm
(f)
. Retighten the units
with a torque wrench and do a twist test! The brake le-
vers need not be absolutely tight. In case of a fall it is an
advantage when the brake levers can be turned.
G Tighten the bolts at the stem until the clamp-
ing slots between the stem body and the
faceplate are parallel and identical in width
at the top and at the bottom
(g)
. Tighten the bolts even-
ly and in a cross pattern, i.e. alternately and gradually,
to the lower value of the recommended torque values
using a torque wrench.
G Note that the bolted connections of stem,
handlebars, bar ends and brakes have to be
tightened to their specified torques. Use a
torque wrench and never exceed the maximum torque
values! The torque values are given in the chapter “Rec-
ommended torque settings” in these MERIDA short op-
erating instructions as well as in your comprehensive
MERIDA user manual, directly on the components and/
or in the instructions of the component manufacturers
on the enclosed MERIDA CD-ROM.
Bar ends and multi-position handlebars give you addi-
tional ways of gripping the handlebars.
G Be aware that the distance you need to stop
your bike increases, when you are riding with
your hands on bar ends
(h)
or on multi-posi-
tion handlebars. The brake levers are not always within
easy reach.
G Never fix bar ends in vertical position or
with their ends pointing rearwards as this
would increase the risk of injury in the event
of an accident.
A If you want to mount multi-position handle-
bars or bar ends to the aluminum handle-
bars of your MERIDA bike, inform yourself in
advance whether these components are permitted on
your MERIDA bike. Contact your MERIDA dealer before
mounting, if necessary.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida 2015 in the language / languages: English as an attachment in your email.

The manual is 3.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merida 2015

Merida 2015 User Manual - English - 56 pages

Merida 2015 Quick start guide - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info