657615
121
Zoom out
Zoom in
Previous page
1/139
Next page
117
28.3.3 Mounting the full carbon fork with
carbon steerer
Cutting the steerer tube, pressing the seat
mounting of the cone bearing and mounting
the fork to the frame, are jobs best left to an
expert. These steps are to be carried out by
authorized MERIDA dealers only. Otherwise
the warranty will become void.
Each of the following instructions
must be followed strictly. Non-observ
-
ance of these instructions can cause the fork
to fail and lead to a crash with serious con-
sequences.
The inner diameter of the headset crown
race must fit the diameter of the crown
of the carbon fork. With 1 1/8”- forks,
the steerer crown race diameter is 30 ±
0.05mm.
tion and until any gap between bearing
and fork head has disappeared. Keep the
fork in hand during hitting and do not put
it down – risk of breakage!
28.3 Carbon forks
Usually, the aluminium bearing seat on
every fork is prepared. If additional work
is necessary nevertheless, only use a sui-
table milling tool for preparing the cone
bearing seats. Sharp-edged or blunt tools
can notch the bearing seats and make the
steerer tube fail.
Clean the contact area of cone and fork
seat and apply a little grease. Hit the cone
bearing seat with an appropriate special-
purpose tool until it is in a horizontal posi-
To cut the fork, do not put it into a vice
as this could damage the shaft. Clamp the
steerer tube with an appropriate device
(e.g. a special vice) and use a sharp metal
saw blade to saw it. Saw with low pressu-
re and remove the burrs with a small file.
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida 2008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida 2008 in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info