657615
116
Zoom out
Zoom in
Previous page
1/139
Next page
112
28.2.4 Headset bearing
Every carbon frame set is delivered with a
semi-integrated headset that is already fitted.
The included flat bearing shells made of alu-
minium must be mounted with specific tools.
Be sure to read the operating instructions for
carbon forks in chapter 28.3 “Carbon forks”,
before doing any work at the fork.
28.2.5 Bottom bracket bearings
All MTB frames: BSA thread: 1.370”x 24 TPI,
(left handed thread on right side).
The width of the shell is 73 ± 0.5 mm.
All road bike frames: BSA thread: 1.370”x
24 TPI, (left handed thread on right side).
The width of the shell is 68 ± 0.5 mm.
exactly with a specialist facing tool, otherwise
the bearings might not run perfectly in line.
Observe the bottom bracket manufacturer’s
torque specifications.
28.2.6 Chainsuck protection
To protect the sensitive surface of the bottom
bracket area against rupture through chain
suck (the chain getting stuck between frame
and chainwheel), there is a protection plate
made of stainless steel fixed on every carbon
mountain bike hard tail frame. Make sure the
protection is located in the correct position, at
the chainstay close to the chain rings.
28.2 MERIDA framesets
The diameter of the steerer tube for the
MERIDA carbon models is 1 1/8” = 28.6 mm
on the upper and bottom side. The outside
diameter of the bearing shells at the steer-
ing head bearing is 50 mm; the diameter of
the flange of the shells to be pressed into the
frame is 44.05 + 0.05 mm.
Common cartridge bearings can be mounted
directly with high-grade grease. For special
bottom brackets with unconnected left and
right side bearings, for example Hollowtech
II (e.g. Dura-Ace, Ultegra, XTR, XT and LX
bearings) the ends of the shell can be aligned
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida 2008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida 2008 in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info