IRail carrier max. 100 kg (incl. rail car-
rier)
I2 transverse braces directly on the se-
curing threads in the roof channel: max.
100 kg (incl. carrier system)
I3 transverse braces directly on the se-
curing threads in the roof channel: max.
150 kg (incl. carrier system)
IHigh-roof vehicles max. 50 kg (incl.
carrier systems)
!For safety reasons, Mercedes-Benz recom-
mends that you only use roof rack systems
which have been tested and approved for
Mercedes-Benz. This will help avoid damage.
Loading directions and other information
concerning load distribution and load se-
curing can be found in the "Operation"
section (epage 217).
Trailer tow hitch
iOnly fit trailer couplings that have been
specially tested and approved for your vehicle
by Mercedes-Benz.
Installation dimensions
1Securing points
2Distance from road surface (350 mm,
laden)
!The distance of the trailer coupling from
the road surface when the vehicle is unladen
depends on the model and equipment fitted on
the vehicle. It is therefore not possible to give a
specific figure.
Observe securing points on the chassis frame
when retrofitting the trailer coupling.
You can obtain further information on retrofit-
ting from a qualified specialist workshop.
Always have maintenance work carried out at a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use a Mercedes-Benz
Service Centre for this purpose.
Technical data
Operating data
355
6
Nur fuer internen Gebrauch