703815
259
Zoom out
Zoom in
Previous page
1/310
Next page
Tire pressure notreached
If atire pressure of 200 kPa (2.0 bar/29 psi)
hasbeenachieved after ten minutes:
X
Switch off the tire inflation compressor.
X
Unscrew the fillerhosefromthe valve of the
faulty tire.
Note thattire sealant mayescapewhenyou
unscrew the fillerhose.
X
Veryslowly drive forwards or reverse
approximately 30 ft (10 m).
X
Pump up the tire again.
After amaximum of ten minutes, the tire
pressure must be at least200 kPa (2.0 bar/
29 psi).
G
WARNING
If the required tire pressure is not reached
afterthe specified time,the tire is too badly
damaged. The tire sealant cannot repairthe
tire in this instance. Damaged tiresand a
tire pressure that is too low can significantly
impairthe vehicle's braking and driving
characteristics. There is ariskofaccident.
Do not continuedriving.Contact aqualified
specialist workshop.
Tire pressure reached
G
WARNING
Atire temporarilysealedwithtire sealant
impairs the vehicle's driving characteristics
and is not suitablefor driving at higher
speeds.There is ariskofanaccident.
Adapt your driving styleaccordingly and
drive carefully.Donot exceedthe maximum
permissible speed for atire sealedwithtire
sealant.
The maximum permissible speed for atire
sealedwithtire sealant is 50 mph (80 km/h).
The upper part of the TIREFIT stickermustbe
affixed to the instrument cluster in the driver's
field of vision.
!
Residue from the tire sealant may come
outofthe fillerhoseafteruse.Thiscould
cause stains.
Therefore, place the fillerhoseinthe plastic
bagwhich contained the TIREFIT kit.
H
Environmental note
Have the used tire sealant bottledisposed
of professionally, e.g. at aqualified special-
ist workshop.
If tire pressure of 200 kPa (2.0 bar/29 psi)
hasbeenachieved afteramaximum period of
ten minutes:
X
Switch off the tire inflation compressor.
X
Unscrewthe fillerhosefrom the valve of the
faulty tire.
X
Stow the tire sealant bottleand the tire
inflation compressor.
X
Pullaway immediately.
X
Stop afterdriving for approximately ten
minutes and check the tire pressure with
the tire inflation compressor.
The tire pressure mustnow be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
afterdriving for ashort period,the tire is too
badlydamaged. The tire sealant cannot
repairthe tire in this instance. Damaged
tiresand atire pressure that is too low can
significantlyimpairthe vehicle's braking and
driving characteristics. There is ariskof
accident.
Do not continuedriving.Contact aqualified
specialist workshop.
i
In casessuchasthe one mentioned
above, contact an authorized Mercedes-
Benz Center. Or call1-800-FOR-MERCedes
(inthe USA) or 1-800-387-0100 (inCanada).
X
Correct the tire pressure if it is stillatleast
130 kPa (1.3 bar/19 psi). See the Tireand
Loading Information placard on the driver's
sideB-pillarorthe tire pressure table in the
fuelfillerflapfor values.
X
To increasethe tire pressure: switch on
the tire inflation compressor.
Flat tire
257
Breakdown assistance
Z
259


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mercedes SLC 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mercedes SLC 2020 in the language / languages: English as an attachment in your email.

The manual is 49,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info