Multimedia system:
4
©
5
Settings
5
Quick Access
Activating automatic car wash mode
#
Select Automatic Car Wash Mode.
#
Select Start.
If one of the settings cannot be selected, this is
displayed by a % behind the respective set‐
ting.
%
For an overview of the settings made when
activating automatic car wash mode
(/ page 483).
Deactivating automatic car wash mode
#
Select Stop.
The automatic car wash settings are reset.
%
The automatic car wash mode is automati‐
cally deactivated as soon as a speed of
12 mph (20 km/h) is exceeded.
Information on using a power washer
&
WARNING Risk of accident when using
high-pressure cleaning equipment with
round-spray nozzles
The water jet from a round-spray nozzle (dirt
grinder) may cause damage to tires and sus‐
pension components that is not visible.
Components damaged in this way may fail
unexpectedly.
#
Do not use high-pressure cleaning
equipment with round-spray nozzles to
clean your vehicle.
#
Damaged tires or suspension compo‐
nents must be replaced immediately.
To avoid damage to your vehicle, observe the fol‐
lowing when using a power washer:
R
Keep the SmartKey at least 10 ft (3 m) away
from the vehicle. Otherwise the tailgate
could open unintentionally.
R
Maintain a distance of at least 11.8 in
(30 cm) to the vehicle.
R
Vehicles with decorative foil: parts of your
vehicle are covered with a decorative foil.
Maintain a distance of at least 27.6 in
(70 cm) between the foil-covered parts of the
vehicle and the nozzle of the power washer.
Move the power washer nozzle around whilst
cleaning. The water temperature of the
power washer must not exceed 124 °F
(60 °C).
R
Observe the information on the correct dis‐
tance in the equipment manufacturer's oper‐
ating instructions.
R
Do not point the nozzle of the power washer
directly at sensitive parts such as tires, slits,
electrical components, batteries, light bulbs
and ventilation slots.
Washing the vehicle by hand
Observe the legal requirements, e.g. in a number
of countries, washing by hand is only permitted
in specially designated wash bays.
#
Use a mild cleaning agent, e.g. car shampoo.
Maintenance and care
485
