Observe the specific instructions for the rear‐
ward-facing and forward-facing child restraint
systems (/ page 60).
Always observe the status of the front passenger
airbag on the PASSENGER AIR BAG OFF indica‐
tor lamp:
R
When using a rearward-facing child restraint
system on the front passenger seat, the front
passenger airbag must always be disabled.
This is only the case if the PASSENGER AIR
BAG OFF indicator lamp is lit continuously
(/ page 45).
R
If the PASSENGER AIR BAG OFF indicator
lamp is off, the front passenger airbag is ena‐
bled. The front passenger airbag may deploy
during an accident.
Securing the child restraint system with the
seat belt on the front passenger seat
When installing a belt-secured child restraint
system on the front passenger seat, always
observe the following:
O
Observe the child restraint system manufac‐
turer's installation and operating instruc‐
tions.
O
When using a forward-facing child restraint
system in Group I: remove the head
restraint from the respective seat, if possi‐
ble.
After the child restraint system has been
removed, replace the head restraints imme‐
diately and adjust them correctly.
O
The backrest of the forward-facing child
restraint system must lie as flat as possible
against the backrest of the front-passenger
seat.
O
For certain child restraint systems in weight
category II or III, there may be restrictions
on the maximum size setting, e.g. due to
possible contact with the roof.
O
The child restraint system must not be ten‐
sioned between the roof and the seat cush‐
ion and/or be installed facing the wrong
direction.
O
The child restraint system must not be put
under strain by the head restraints. Adjust
the head restraints accordingly.
O
Never place objects under or behind the
child restraint system, e.g. cushions.
The seat belt on the front passenger side is
equipped with a special seat belt retractor.
When enabled, the special seat belt retractor
function ensures that the seat belt does not
slacken once the child restraint system is
secured (/ page 54).
#
Set the front passenger seat as far back as
possible and move the seat into the highest
position if possible.
#
Fully retract the seat cushion length adjust‐
ment.
#
Adjust the seat cushion inclination so that
the front edge of the seat cushion is in the
60
Occupant safety