624692
23
Zoom out
Zoom in
Previous page
1/426
Next page
E-Class
Sedan and Wagon
Operator's Manual
Order no. 6515 3624 13 Part no. 212 584 79 01 Edition A-2015
É2125847901lËÍ
2125847901
E-Class Sedan and Wagon Operator's Manual
Publication details
Internet
Further information about Mercedes-Benz
vehicles and about Daimler AG can be found
on the following websites:
http://www.mbusa.com (USA only)
http://www.mercedes-benz.ca (Canada
only)
Editorial office
©
Daimler AG: Not to be reprinted, translated
or otherwise reproduced, in whole or in part,
without written permission from Daimler AG.
Vehicle manufacturer
Daimler AG
Mercedesstraße 137
70327 Stuttgart
Germany
Symbols
Registered trademarks:
R
Bluetooth
®
is a registered trademark of
Bluetooth SIG Inc.
R
DTS is a registered trademark of DTS, Inc.
R
Dolby and MLP are registered trademarks
of DOLBY Laboratories.
R
BabySmart™, ESP
®
and PRE-SAFE
®
are
registered trademarks of Daimler AG.
R
HomeLink
®
is a registered trademark of
Johnson Controls.
R
iPod
®
and iTunes
®
are registered trade-
marks of Apple Inc.
R
Logic7
®
is a registered trademark of Har-
man International Industries.
R
Microsoft
®
and Windows media
®
are reg-
istered trademarks of Microsoft Corpora-
tion.
R
SIRIUS is a registered trademark of Sirius
XM Radio Inc.
R
HD Radio is a registered trademark of iBiq-
uity Digital Corporation.
R
Gracenote
®
is a registered trademark of
Gracenote, Inc.
R
ZAGATSurvey
®
and related brands are reg-
istered trademarks of ZagatSurvey, LLC.
In this Operator's Manual you will find the fol-
lowing symbols:
G
WARNING
Warning notes make you aware of dangers
which could pose a threat to your health or
life, or to the health and life of others.
H
Environmental note
Environmental notes provide you with infor-
mation on environmentally aware actions or
disposal.
!
Notes on material damage alert you to
dangers that could lead to damage to your
vehicle.
i
Practical tips or further information that
could be helpful to you.
X
This symbol indicates an instruction
that must be followed.
X
Several of these symbols in succes-
sion indicate an instruction with sev-
eral steps.
(Y
page)
This symbol tells you where you can
find more information about a topic.
YY
This symbol indicates a warning or an
instruction that is continued on the
next page.
Dis‐Dis‐
playplay
This font indicates a display in the
multifunction display/COMAND dis-
play.
Parts of the software in the vehicle are pro-
tected by copyright
©
2005
The FreeType Project
http://www.freetype.org. All rights
reserved.
As at 04.12.2013
Welcome to the world of Mercedes-Benz
We urge you to read this Operator's Manual
carefully and familiarize yourself with the
vehicle before driving. For your own safety
and a longer vehicle life, follow the instruc-
tions and warning notices in this manual.
Ignoring them could result in damage to the
vehicle or personal injury to you or others.
Vehicle damage caused by failure to follow
instructions is not covered by the Mercedes-
Benz Limited Warranty.
The equipment or product designation of your
vehicle may vary depending on:
R
model
R
order
R
country specification
R
availability
Mercedes-Benz therefore reserves the right
to introduce changes in the following areas:
R
design
R
equipment
R
technical features
The equipment in your vehicle may therefore
differ from that shown in the descriptions and
illustrations.
The following are integral components of the
vehicle:
R
Operator's Manual
R
Maintenance Booklet
R
Equipment-dependent supplements
Keep these documents in the vehicle at all
times. If you sell the vehicle, always pass all
documents on to the new owner.
You can also use the EClass Guide smart-
phone app:
Apple
®
iOS
Android™
Please note that the Mercedes-Benz Guides
App may not yet be available in your country.
The technical documentation team at
Daimler AG wishes you safe and pleasant
motoring.
Mercedes-Benz USA, LLC
Mercedes-Benz Canada, Inc.
A Daimler Company
2125847901
É2125847901lËÍ
Index ....................................................... 4
Introduction ......................................... 23
At a glance ........................................... 31
Safety ................................................... 41
Opening and closing ........................... 83
Seats, steering wheel and mirrors .. 109
Lights and windshield wipers .......... 127
Climate control ................................. 141
Driving and parking .......................... 155
On-board computer and displays .... 231
Stowage and features ...................... 291
Maintenance and care ...................... 329
Roadside Assistance ........................ 343
Wheels and tires ............................... 361
Technical data ................................... 409
Contents
3
1, 2, 3 ...
115 V socket ...................................... 315
12 V socket
see Sockets
360° camera
Cleaning .........................................340
Function/notes .............................215
4ETS
see ETS/4ETS (Electronic Trac-
tion System)
4MATIC (permanent four-wheel
drive) ..................................................205
A
ABS (Anti-lock Braking System)
Display message ............................ 252
Function/notes ................................ 69
Important safety notes .................... 69
Warning lamp ................................. 282
Accident
Automatic measures after an acci-
dent ................................................. 61
Activating/deactivating cooling
with air dehumidification ................. 147
Active Blind Spot Assist
Activating/deactivating (on-
board computer) ............................ 242
Display message ............................ 270
Function/information .................... 224
Active Driving Assistance package .. 224
Active Lane Keeping Assist
Activating/deactivating (on-
board computer) ............................ 242
Display message ............................ 269
Function/information .................... 227
Active multicontour seat
Adjusting (on the seat) .................. 114
Active Parking Assist
Detecting parking spaces .............. 210
Display message ............................ 270
Exiting a parking space .................. 212
Function/notes ............................. 209
Important safety notes .................. 209
Parking .......................................... 211
ADAPTIVE BRAKE ................................. 78
Adaptive Brake Assist
Function/notes ................................ 73
Adaptive Damping System (ADS) ..... 203
Adaptive Highbeam Assist
Display message ............................ 264
Function/notes ............................. 132
Switching on/off ........................... 133
Additives (engine oil) ........................ 416
Air bags
Deployment ..................................... 57
Display message ............................ 260
Front air bag (driver, front
passenger) ....................................... 50
Important safety notes .................... 48
Introduction ..................................... 48
Knee bag .......................................... 50
PASSENGER AIR BAG OFF indica-
tor lamp ........................................... 43
Pelvis air bag ................................... 51
Side impact air bag .......................... 50
Window curtain air bag .................... 51
Air-conditioning system
see Climate control
Air filter (display message) .............. 267
AIRMATIC
Display message ............................ 268
Function/notes ............................. 202
Air vents
Glove box ....................................... 153
Important safety notes .................. 153
Rear ............................................... 154
Setting ........................................... 153
Setting the center air vents ........... 153
Setting the side air vents ............... 153
Alarm
ATA (Anti-Theft Alarm system) ......... 81
Switching off (ATA) .......................... 81
Switching the function on/off
(ATA) ................................................ 81
Alarm system
see ATA (Anti-Theft Alarm system)
Ambient lighting
Setting the brightness (on-board
computer) ...................................... 244
Setting the color (on-board com-
puter) ............................................. 245
4
Index
AMG adaptive sport suspension
system ................................................ 203
Anti-lock braking system
see ABS (Anti-lock Braking System)
Anti-Theft Alarm system
see ATA (Anti-Theft Alarm system)
Ashtray ...............................................312
Assistance display (on-board com-
puter) ..................................................241
Assistance menu (on-board com-
puter) ..................................................240
ASSYST PLUS
Displaying a service message ........335
Hiding a service message .............. 335
Notes ............................................. 334
Resetting the service interval dis-
play ................................................ 335
Service message ............................ 334
Special service requirements ......... 335
ATA (Anti-Theft Alarm system)
Activating/deactivating ................... 81
Function ...........................................81
Switching off the alarm .................... 81
ATTENTION ASSIST
Activating/deactivating ................. 242
Display message ............................ 268
Function/notes ............................. 219
Audio system
see separate operating instructions
Authorized Mercedes-Benz Center
see Qualified specialist workshop
Authorized workshop
see Qualified specialist workshop
AUTO lights
Display message ............................ 263
see Lights
Automatic car wash (care) ............... 336
Automatic engine start (ECO start/
stop function) .................................... 162
Automatic engine switch-off (ECO
start/stop function) .......................... 162
Automatic headlamp mode .............. 129
Automatic transmission
Accelerator pedal position ............. 168
Automatic drive program ............... 170
Changing gear ............................... 168
DIRECT SELECT lever ..................... 166
Display message ............................ 276
Drive program display .................... 166
Driving tips .................................... 168
Emergency running mode .............. 173
Engaging drive position .................. 168
Engaging neutral ............................ 167
Engaging park position (AMG vehi-
cles) ............................................... 165
Engaging reverse gear ................... 167
Engaging the park position ............ 166
Kickdown ....................................... 169
Manual drive program .................... 171
Manual drive program (AMG vehi-
cles) ............................................... 172
Overview ........................................ 165
Problem (malfunction) ................... 173
Program selector button ................ 169
Pulling away ................................... 160
Selector lever ................................ 165
Starting the engine ........................ 160
Steering wheel paddle shifters ...... 170
Transmission position display ........ 165
Transmission position display
(DIRECT SELECT lever) ................... 166
Transmission positions .................. 168
Automatic transmission emer-
gency mode ....................................... 173
B
BAS (Brake Assist System) ................. 70
BAS PLUS (Brake Assist System
PLUS) with Cross-Traffic Assist
Function/notes ................................ 70
Important safety notes .................... 70
Battery (SmartKey)
Checking .......................................... 87
Replacing ......................................... 87
Battery (vehicle)
Charging ........................................ 352
Display message ............................ 265
Important safety notes .................. 349
Jump starting ................................. 353
Belt
see Seat belts
Blind Spot Assist
Activating/deactivating (on-
board computer) ............................ 242
Index
5
Display message ............................ 270
Notes/function .............................. 220
see Active Blind Spot Assist
BlueTEC (DEF) .................................... 415
BlueTEC
®
Adding DEF .................................... 177
Box (trunk) ......................................... 303
Brake Assist
see BAS (Brake Assist System)
Brake fluid
Display message ............................ 254
Notes ............................................. 416
Brake lamps
Display message ............................ 262
Brakes
ABS .................................................. 69
Adaptive Brake Assist ...................... 73
BAS .................................................. 70
BAS PLUS with Cross-Traffic
Assist ............................................... 70
Brake fluid (notes) ......................... 416
Display message ............................ 252
High-performance brake system .... 185
HOLD function ............................... 200
Important safety notes .................. 183
Maintenance .................................. 184
Parking brake ................................ 180
Riding tips ...................................... 183
Warning lamp ................................. 281
Breakdown
see Flat tire
Brightness control (instrument
cluster lighting) ................................... 33
Bulbs
see Replacing bulbs
C
California
Important notice for retail cus-
tomers and lessees .......................... 25
Calling up a malfunction
see Display messages
Car
see Vehicle
Care
360° camera ................................. 340
Carpets .......................................... 342
Car wash ........................................ 336
Display ........................................... 341
Exhaust pipe .................................. 340
Exterior lights ................................ 339
Gear or selector lever .................... 341
Interior ........................................... 341
Matte finish ................................... 338
Notes ............................................. 335
Paint .............................................. 338
Plastic trim .................................... 341
Power washer ................................ 337
Rear view camera .......................... 340
Roof lining ...................................... 342
Seat belt ........................................ 342
Seat cover ..................................... 341
Sensors ......................................... 340
Steering wheel ............................... 341
Trim pieces .................................... 341
Washing by hand ........................... 337
Wheels ........................................... 338
Windows ........................................ 339
Wiper blades .................................. 339
Wooden trim .................................. 341
Cargo compartment cover
Important safety notes .................. 300
Cargo compartment enlargement ... 298
Cargo compartment floor ................. 306
Cargo net
Attaching ....................................... 302
Important safety information ......... 302
Cargo tie down rings ......................... 300
Car key
see SmartKey
CD player/CD changer (on-board
computer) .......................................... 238
Center console
Lower section .................................. 37
Lower section (AMG vehicles) .......... 38
Upper section .................................. 36
Central locking
Automatic locking (on-board com-
puter) ............................................. 246
Locking/unlocking (SmartKey) ........ 84
6
Index
Changing bulbs
High-beam headlamps ...................135
Turn signals (front) ......................... 136
Child-proof locks
Important safety notes .................... 67
Rear doors ....................................... 68
Children
Restraint systems ............................ 63
Special seat belt retractor ...............63
Child seat
Forward-facing restraint system ...... 67
LATCH-type (ISOFIX) child seat
anchors ............................................ 64
On the front-passenger seat ............ 66
Rearward-facing restraint system .... 67
Top Tether .......................................65
Cigarette lighter ................................ 313
Cleaning
Mirror turn signal ...........................339
Climate control
Automatic climate control (3-
zone) .............................................. 145
Controlling automatically ...............148
Cooling with air dehumidification .. 147
Defrosting the windows ................. 151
Defrosting the windshield .............. 150
Dual-zone automatic climate con-
trol ................................................. 143
Important safety notes .................. 142
Indicator lamp ................................ 148
Information about using auto-
matic climate control ..................... 146
Information about using dual-zone
automatic climate control .............. 144
Maximum cooling .......................... 151
Overview of systems ......................142
Problems with cooling with air
dehumidification ............................ 148
Problem with the rear window
defroster ........................................ 152
Rear control panel ......................... 145
Refrigerant ..................................... 418
Refrigerant filling capacity ............. 419
Setting the air distribution ............. 149
Setting the airflow ......................... 150
Setting the air vents ......................153
Setting the climate mode ...............148
Setting the temperature ................ 149
Setting the temperature with 3-
zone automatic climate control ..... 149
Setting the temperature with dual-
zone automatic climate control ..... 149
Switching air-recirculation mode
on/off ............................................ 152
Switching on/off ........................... 146
Switching residual heat on/off ...... 152
Switching the rear window
defroster on/off ............................ 151
Switching the ZONE function on/
off ..................................................150
Climate control system
Automatic engine start .................. 162
Automatic engine switch-off .......... 162
Deactivating/activating ................. 162
Important safety notes .................. 161
Introduction ................................... 161
Coat hooks ......................................... 303
Cockpit
Overview .......................................... 32
see Instrument cluster
Collapsible spare wheel
Inflating ......................................... 405
see Emergency spare wheel
COLLISION PREVENTION ASSIST
PLUS
Activating/deactivating ................. 242
Display message ............................ 255
Operation/notes .............................. 72
COMAND
see separate operating instructions
COMAND display
Cleaning ......................................... 341
Combination switch .......................... 130
Combined cargo cover and net ........301
Consumption statistics (on-board
computer) .......................................... 235
Convenience box ............................... 303
Convenience closing feature ............ 101
Convenience opening feature .......... 100
Coolant (engine)
Checking the level ......................... 333
Display message ............................ 264
Filling capacity ............................... 418
Important safety notes .................. 417
Index
7
Temperature (on-board com-
puter) ............................................. 247
Temperature gauge ........................ 232
Warning lamp ................................. 287
Cooling
see Climate control
Copyright ............................................. 30
Cornering light function
Display message ............................261
Function/notes .............................131
Crash-responsive emergency light-
ing ....................................................... 134
Cruise control
Activation conditions ..................... 187
Cruise control lever ....................... 187
Deactivating ................................... 189
Display message ............................ 273
Driving system ............................... 187
Function/notes .............................187
Important safety notes .................. 187
Setting a speed .............................. 188
Storing and maintaining current
speed ............................................. 188
Cup holder
Center console .............................. 309
Folding bench seat ........................ 310
Important safety notes .................. 309
Rear compartment ......................... 310
Customer Assistance Center
(CAC) ..................................................... 28
Customer Relations Department ....... 28
D
Dashboard
see Instrument cluster
Data
see Technical data
Daytime running lamps
Display message ............................ 263
Function/notes .............................129
Switching on/off (on-board com-
puter) ............................................. 244
Declarations of conformity ................. 27
DEF
Adding ...........................................177
Display message ............................ 267
Filling capacity ............................... 415
Important safety notes .................. 415
Delayed switch-off
Exterior lighting (on-board com-
puter) ............................................. 245
Interior lighting .............................. 245
Diagnostics connection ......................27
Diesel .................................................. 413
Digital speedometer .........................236
DIRECT SELECT lever
Automatic transmission ................. 166
Display messages
ASSYST PLUS ................................ 334
Calling up (on-board computer) ..... 251
Driving systems .............................268
Engine ............................................ 264
General notes ................................ 251
Hiding (on-board computer) ........... 251
KEYLESS-GO .................................. 278
Lights ............................................. 261
Safety systems .............................. 252
SmartKey ....................................... 278
Tires ............................................... 274
Vehicle ...........................................276
Distance recorder .............................235
Distance warning (warning lamp) .... 289
Distance warning function
Function/notes ................................ 72
DISTRONIC PLUS
Activating ....................................... 191
Activation conditions ..................... 191
Deactivating ................................... 196
Display message ............................ 271
Displays in the multifunction dis-
play ................................................ 195
Function/notes ............................. 189
Important safety notes .................. 190
Setting the specified minimum
distance ......................................... 194
Doors
Automatic locking (on-board com-
puter) ............................................. 246
Automatic locking (switch) ............... 90
Central locking/unlocking
(SmartKey) ....................................... 84
Control panel ................................... 40
Display message ............................ 277
8
Index
Emergency locking ........................... 91
Emergency unlocking ....................... 91
Important safety notes .................... 89
Opening (from inside) ...................... 89
Drinking and driving ......................... 182
Drive program
Automatic ...................................... 170
Display ........................................... 165
Display (DIRECT SELECT lever) ...... 166
Manual ........................................... 171
Manual (AMG vehicles) .................. 172
SETUP (on-board computer) .......... 248
Drive program selector ..................... 169
Driver's door
see Doors
Driving abroad
Mercedes-Benz Service ................. 335
Symmetrical low beam .................. 128
Driving on flooded roads .................. 186
Driving safety systems
ABS (Anti-lock Braking System) ....... 69
ADAPTIVE BRAKE ............................. 78
Adaptive Brake Assist ...................... 73
BAS (Brake Assist System) .............. 70
BAS PLUS with Cross-Traffic
Assist ............................................... 70
COLLISION PREVENTION ASSIST
PLUS ................................................ 72
Distance warning function ............... 72
EBD (electronic brake force distri-
bution) ............................................. 78
ESP
®
(Electronic Stability Pro-
gram) ............................................... 74
ETS/4ETS (Electronic Traction
System) ........................................... 75
Important safety information ........... 69
Overview .......................................... 69
PRE-SAFE
®
Brake ............................. 78
STEER CONTROL ............................. 80
Driving systems
360°camera .................................. 215
Active Blind Spot Assist ................. 224
Active Driving Assistance pack-
age ................................................. 224
Active Lane Keeping Assist ............ 227
Active Parking Assist ..................... 209
AIRMATIC ...................................... 202
AMG adaptive sport suspension
system ........................................... 203
ATTENTION ASSIST ........................ 219
Blind Spot Assist ............................ 220
Cruise control ................................ 187
Display message ............................ 268
DISTRONIC PLUS ........................... 189
DISTRONIC PLUS with Steering
Assist and Stop&Go Pilot ............... 198
HOLD function ............................... 200
Lane Keeping Assist ...................... 222
Lane Tracking package .................. 220
PARKTRONIC ................................. 206
RACE START (AMG vehicles) .......... 201
Rear view camera .......................... 214
Driving tips
AMG ceramic brakes ..................... 185
Automatic transmission ................. 168
Brakes ........................................... 183
Break-in period .............................. 156
Downhill gradient ........................... 183
Drinking and driving ....................... 182
Driving abroad ............................... 128
Driving in winter ............................. 186
Driving on flooded roads ................ 186
Driving on wet roads ...................... 185
Exhaust check ............................... 182
Fuel ................................................ 182
General .......................................... 181
Hydroplaning ................................. 185
Icy road surfaces ........................... 186
Limited braking efficiency on sal-
ted roads ....................................... 184
Snow chains .................................. 365
Symmetrical low beam .................. 128
Wet road surface ........................... 184
DVD video
Operating (on-board computer) ..... 239
E
EASY-ENTRY feature
Activating/deactivating ................. 246
Function/notes ............................. 121
EASY-EXIT feature
Crash-responsive ........................... 122
Function/notes ............................. 121
Switching on/off ........................... 246
Index
9
EASY-PACK cargo compartment
management system ........................ 304
EASY-PACK folding floor
Important safety notes .................. 306
EASY-PACK folding luggage-com-
partment floor
Opening and closing ...................... 306
EASY-PACK load-securing kit
Components and storage .............. 304
Inserting the brackets into the
loading rail .....................................305
EASY-PACK rear sill protector .......... 307
EASY-PACK trunk box ....................... 303
EBD (electronic brake force distri-
bution)
Display message ............................ 254
Function/notes ................................ 78
ECO display
Function/notes .............................182
On-board computer ....................... 236
ECO start/stop function
General information ....................... 161
Electronic Stability Program
see ESP
®
(Electronic Stability Program)
Emergency
Automatic measures after an acci-
dent ................................................. 61
Emergency release
Driver's door ....................................91
Fuel filler flap ................................. 175
Trunk ............................................... 98
Vehicle ............................................. 91
Emergency spare wheel
General notes ................................ 404
Important safety notes .................. 404
Removing ....................................... 404
Storage location ............................ 404
Stowing .......................................... 405
Technical data ............................... 407
Emergency Tensioning Devices
Activation ......................................... 57
Emergency unlocking
Tailgate ............................................ 98
Emissions control
Service and warranty information .... 24
Engine
Check Engine warning lamp ........... 286
Display message ............................ 264
ECO start/stop function ................ 161
Engine number ............................... 411
Irregular running ............................ 164
Jump-starting ................................. 353
Starting problems .......................... 164
Starting the engine with the
SmartKey ....................................... 160
Starting with KEYLESS-GO ............. 160
Switching off .................................. 180
Tow-starting (vehicle) ..................... 358
Engine electronics
Problem (malfunction) ................... 164
Engine oil
Adding ........................................... 332
Additives ........................................ 416
Checking the oil level ..................... 331
Checking the oil level using the
dipstick .......................................... 332
Display message ............................ 266
Filling capacity ............................... 416
Notes about oil grades ................... 415
Notes on oil level/consumption .... 331
Temperature (on-board com-
puter) ............................................. 247
Viscosity ........................................ 416
ESP
®
(Electronic Stability Pro-
gram)
AMG menu (on-board computer) ... 248
Characteristics ................................. 75
Deactivating/activating (AMG
vehicles) .......................................... 76
Deactivating/activating (except
AMG vehicles) ................................ 241
Deactivating/activating (notes;
except AMG vehicles) ...................... 76
Display message ............................ 252
ETS/4ETS ........................................ 75
Function/notes ................................ 74
General notes .................................. 74
Important safety information ........... 75
Warning lamp ................................. 283
ETS/4ETS (Electronic Traction Sys-
tem) ...................................................... 75
Exhaust check ................................... 182
10
Index
Exhaust pipe (cleaning instruc-
tions) .................................................. 340
Exterior lighting
Setting options .............................. 128
see Lights
Exterior mirrors
Adjusting .......................................122
Dipping (automatic) ....................... 124
Folding in/out (automatically) ....... 123
Folding in/out (electrically) ........... 123
Folding in when locking (on-board
computer) ...................................... 247
Out of position (troubleshooting) ... 123
Setting ........................................... 123
Storing settings (memory func-
tion) ............................................... 125
Storing the parking position .......... 124
Eyeglasses compartment ................. 293
F
Filler cap
see Fuel filler flap
Flat tire
MOExtended tires .......................... 345
Preparing the vehicle ..................... 345
TIREFIT kit ...................................... 346
see Emergency spare wheel
Floormats ........................................... 327
Folding bench seat (cargo com-
partment) ........................................... 115
Fuel
Additives ........................................ 413
Consumption statistics .................. 235
Displaying the current consump-
tion ................................................ 236
Displaying the range ...................... 236
Driving tips .................................... 182
Flexible fuel vehicles ...................... 414
Fuel gauge ....................................... 33
Grade (gasoline) ............................ 412
Important safety notes .................. 412
Premium-grade unleaded gaso-
line ................................................. 412
Problem (malfunction) ................... 177
Quality (diesel) ............................... 413
Refueling ........................................ 173
Tank content/reserve fuel ............. 412
Fuel filler flap
Emergency release ........................ 175
Opening ......................................... 175
Fuel filter (display message) ............ 267
Fuel level
Calling up the range (on-board
computer) ...................................... 236
Fuel tank
Capacity ........................................ 412
Problem (malfunction) ................... 177
Fuse allocation chart (vehicle tool
kit) ...................................................... 344
Fuses
Allocation chart ............................. 358
Before changing ............................. 358
Fuse box in the cargo compart-
ment .............................................. 359
Fuse box in the engine compart-
ment .............................................. 358
Fuse box in the trunk ..................... 359
Important safety notes .................. 358
G
Garage door opener
Clearing the memory ..................... 327
General notes ................................ 324
Important safety notes .................. 325
Opening/closing the garage door..327
Programming (button in the rear-
view mirror) ................................... 325
Gear indicator (on-board com-
puter) ..................................................247
Genuine parts ...................................... 23
Glove box ...........................................293
H
Handbrake
see Parking brake
HANDS-FREE ACCESS .......................... 94
Hazard warning lamps ......................131
Head bags
Display message ............................ 258
Headlamps
Fogging up ..................................... 133
see Automatic headlamp mode
Index
11
Head restraints
Adjusting ....................................... 112
Adjusting (angle) ............................ 113
Adjusting (electrically) ................... 113
Adjusting (rear) .............................. 113
Installing/removing (rear) .............. 114
Luxury ............................................ 113
see NECK-PRO head restraints
see NECK-PRO luxury head restraints
Heating
see Climate control
High-beam headlamps
Adaptive Highbeam Assist ............. 132
Changing bulbs .............................. 135
Display message ............................ 262
Switching on/off ........................... 130
Hill start assist .................................. 161
HOLD function
Activating ....................................... 200
Deactivating ................................... 200
Display message ............................ 269
Function/notes ............................. 200
Hood
Closing ........................................... 331
Display message ............................ 277
Important safety notes .................. 330
Opening .........................................330
Horn ...................................................... 32
Hydroplaning ..................................... 185
I
Ignition lock
see Key positions
Immobilizer .......................................... 80
Indicator and warning lamps
COLLISION PREVENTION ASSIST
PLUS .............................................. 289
Indicator lamps
see Warning and indicator lamps
Indicators
see Turn signals
Insect protection on the radiator .... 331
Instrument cluster
Overview .......................................... 33
Settings ......................................... 243
Warning and indicator lamps ........... 34
Instrument cluster lighting .............. 244
Interior lighting
Automatic control .......................... 134
Delayed switch-off (on-board
computer) ...................................... 245
Emergency lighting ........................ 134
Manual control ............................... 134
Overview ........................................ 133
Reading lamp ................................. 133
Setting the brightness of the
ambient lighting (on-board com-
puter) ............................................. 244
Setting the brightness of the dis-
play/switch (on-board computer) .. 244
Setting the color of the ambient
lighting (on-board computer) ......... 245
J
Jack
Storage location ............................ 344
Using ............................................. 386
Jump starting (engine) ......................353
K
KEYLESS-GO
Convenience closing feature .......... 101
Display message ............................ 278
Locking ............................................ 85
Removing the Start/Stop button ... 159
Start/Stop button .......................... 158
Starting the engine ........................ 160
Unlocking ......................................... 85
Key positions
KEYLESS-GO .................................. 158
SmartKey ....................................... 157
Kickdown
Driving tips ....................................169
Manual drive program .................... 172
Knee bag .............................................. 50
12
Index
L
Lamps
see Warning and indicator lamps
Lane Keeping Assist
Activating/deactivating .................242
Display message ............................ 269
Function/information .................... 222
Lane Tracking package ..................... 220
Lap time (RACETIMER) ...................... 248
LATCH-type (ISOFIX) child seat
anchors ................................................ 64
License plate lamp (display mes-
sage) ................................................... 262
Light function, active
Display message ............................ 263
Lights
Activating/deactivating the inte-
rior lighting delayed switch-off ....... 245
Adaptive Highbeam Assist ............. 132
Automatic headlamp mode ............ 129
Cornering light function ................. 131
Driving abroad ............................... 128
Hazard warning lamps ................... 131
High beam flasher .......................... 131
High-beam headlamps ................... 130
Light switch ................................... 128
Low-beam headlamps .................... 129
Parking lamps ................................ 130
Rear fog lamp ................................ 130
Setting the brightness of the
ambient lighting (on-board com-
puter) ............................................. 244
Setting the brightness of the dis-
play/switch (on-board computer) .. 244
Setting the color of the ambient
lighting (on-board computer) ......... 245
Standing lamps .............................. 130
Switching the daytime running
lamps on/off (on-board com-
puter) ............................................. 244
Switching the exterior lighting
delayed switch-off on/off (on-
board computer) ............................ 245
Switching the surround lighting
on/off (on-board computer) .......... 245
Turn signals ................................... 130
see Interior lighting
see Replacing bulbs
Light sensor (display message) ....... 263
Loading guidelines ............................ 292
Locking
see Central locking
Locking (doors)
Automatic ........................................ 90
Emergency locking ........................... 91
From inside (central locking but-
ton) .................................................. 90
Locking centrally
see Central locking
Locking verification signal (on-
board computer) ............................... 246
Low-beam headlamps
Display message ............................ 261
Setting for driving abroad (sym-
metrical) ........................................ 128
Switching on/off ........................... 129
Luggage holder (EASY-PACK load-
securing kit) ....................................... 305
Lumbar support
Adjusting the 4-way lumbar sup-
port ................................................ 115
Luxury head restraints ..................... 113
M
M+S tires ............................................ 364
Malfunction message
see Display messages
Matte finish (cleaning instruc-
tions) .................................................. 338
mbrace
Call priority .................................... 320
Display message ............................ 255
Downloading destinations
(COMAND) ..................................... 320
Downloading routes ....................... 323
Emergency call .............................. 317
General notes ................................ 316
Geo fencing ................................... 324
Locating a stolen vehicle ............... 322
Index
13
MB info call button ........................ 319
Remote vehicle locking .................. 322
Roadside Assistance button ..........318
Search & Send ............................... 321
Self-test ......................................... 317
Speed alert ....................................324
System .......................................... 317
Triggering the vehicle alarm ........... 324
Vehicle remote malfunction diag-
nosis .............................................. 323
Vehicle remote unlocking .............. 321
Mechanical key
Function/notes ................................ 86
Inserting .......................................... 86
Locking vehicle ................................ 91
Removing ......................................... 86
Unlocking the driver's door .............. 91
Media Interface
see Separate operating instructions
Memory card (audio) ......................... 238
Memory function ............................... 125
Mercedes-Benz Intelligent Drive
360°camera .................................. 215
ABS (Anti-lock Brake System) .......... 69
Active Blind Spot Assist ................. 224
Active Lane Keeping Assist ............ 227
Active Parking Assist ..................... 209
ATTENTION ASSIST ........................ 219
BAS (Brake Assist) ........................... 70
BAS PLUS (Brake Assist PLUS)
with Cross-Traffic Assist .................. 70
Blind Spot Assist ............................ 220
COLLISION PREVENTION ASSIST
PLUS ................................................ 72
Cruise control ................................ 187
DISTRONIC PLUS ........................... 189
DISTRONIC PLUS with Steering
Assist and Stop&Go Pilot ...............198
ESP
®
(Electronic Stability Pro-
gram) ............................................... 74
General notes ................................ 187
Lane Keeping Assist ......................222
PARKTRONIC ................................. 206
PRE-SAFE
®
(anticipatory occu-
pant protection) ............................... 60
PRE-SAFE
®
Brake .............................78
PRE-SAFE
®
PLUS (anticipatory
occupant protection PLUS) .............. 61
Rear view camera .......................... 214
Message memory (on-board com-
puter) .................................................. 251
Messages
see Display messages
Mirrors
see Exterior mirrors
see Rear-view mirror
see Vanity mirror (in the sun visor)
Mobile phone
Menu (on-board computer) ............ 239
Modifying the programming
(SmartKey) ...........................................85
MOExtended tires .............................. 345
Mounting wheels
Lowering the vehicle ...................... 389
Mounting a new wheel ................... 388
Preparing the vehicle .....................385
Raising the vehicle ......................... 386
Removing a wheel .......................... 388
Securing the vehicle against roll-
ing away ........................................ 385
MP3
Operation ....................................... 238
see separate operating instructions
Multifunction display
Function/notes .............................234
Permanent display ......................... 244
Multifunction steering wheel
Operating the on-board computer .. 233
Overview .......................................... 35
N
Navigation
Menu (on-board computer) ............ 237
NECK-PRO head restraints
Operation ......................................... 59
Resetting triggered .......................... 59
NECK-PRO luxury head restraints
Important safety notes .................... 59
Operation ......................................... 59
Resetting when triggered ................. 60
Notes on breaking-in a new vehi-
cle ....................................................... 156
14
Index
O
Occupant Classification System
(OCS)
Conditions ....................................... 52
Faults ............................................... 56
Operation ......................................... 52
System self-test ...............................54
Occupant safety
Automatic measures after an acci-
dent .................................................61
Children in the vehicle .....................62
Important safety notes .................... 43
Pets in the vehicle ........................... 68
PRE-SAFE
®
(anticipatory occu-
pant protection) ............................... 60
OCS
Conditions ....................................... 52
Faults ............................................... 56
Operation .........................................52
System self-test ............................... 54
Odometer ........................................... 235
Oil
see Engine oil
On-board computer
AMG menu ..................................... 247
Assistance menu ........................... 240
Audio menu ................................... 238
Convenience submenu .................. 246
Displaying a service message ........ 335
Display messages .......................... 251
DISTRONIC PLUS ........................... 195
Factory settings submenu ............. 247
Important safety notes .................. 232
Instrument cluster submenu .......... 243
Lighting submenu .......................... 244
Menu overview .............................. 235
Message memory .......................... 251
Navigation menu ............................ 237
Operation ....................................... 233
RACETIMER ................................... 248
Service menu ................................. 243
Settings menu ............................... 243
Standard display ............................ 235
Telephone menu ............................ 239
Trip menu ...................................... 235
Vehicle submenu ........................... 246
Video DVD operation ..................... 239
Operating safety
Declaration of conformity ................ 27
Important safety notes .................... 26
Operating system
see On-board computer
Operator's Manual
Vehicle equipment ........................... 24
Outside temperature display ........... 233
Overhead control panel ...................... 39
Override feature
Rear side windows ........................... 68
P
Paint code number ............................ 410
Paintwork (cleaning instructions) ... 338
Panic alarm .......................................... 42
Panorama roof with power tilt/
sliding panel
Important safety notes .................. 103
Opening/closing ............................ 105
Opening/closing the roller sun-
blind ............................................... 106
Problem (malfunction) ................... 108
Resetting ....................................... 106
Parking
Important safety notes .................. 179
Parking brake ................................ 180
Position of exterior mirror, front-
passenger side ............................... 124
Rear view camera .......................... 214
see PARKTRONIC
Parking aid
Active Parking Assist ..................... 209
see Exterior mirrors
see PARKTRONIC
Parking assistance
see PARKTRONIC
Parking brake
Display message ............................ 254
Notes/function .............................. 180
Warning lamp ................................. 281
Parking lamps
Switching on/off ........................... 130
PARKTRONIC
Deactivating/activating ................. 208
Driving system ............................... 206
Index
15
Function/notes ............................. 206
Important safety notes .................. 206
Problem (malfunction) ................... 209
Range of the sensors ..................... 206
Warning display ............................. 207
PASSENGER AIR BAG OFF
Indicator lamp .................................. 43
Problems (malfunction) .................. 260
Pets in the vehicle ............................... 68
Plastic hooks ..................................... 300
Plastic trim (cleaning instruc-
tions) .................................................. 341
Power washers .................................. 337
Power windows
see Side windows
PRE-SAFE
®
(anticipatory occupant
protection)
Display message ............................ 255
Operation ......................................... 60
PRE-SAFE
®
Brake
Activating/deactivating ................. 241
Display message ............................ 256
Function/notes ................................ 78
Important safety notes .................... 78
Warning lamp ................................. 289
PRE-SAFE
®
PLUS (anticipatory
occupant protection PLUS)
Operation ......................................... 61
Program selector button .................. 169
Protection against theft
ATA (Anti-Theft Alarm system) ......... 81
Immobilizer ...................................... 80
Protection of the environment
General notes .................................. 23
Pulling away
Automatic transmission ................. 160
General notes ................................ 160
Q
Qualified specialist workshop ........... 27
R
RACE START (AMG vehicles) ............. 201
RACETIMER (on-board computer) .... 248
Radiator cover ................................... 331
Radio
Selecting a station ......................... 238
see separate operating instructions
Radio-wave reception/transmis-
sion in the vehicle
Declaration of conformity ................ 27
Reading lamp ..................................... 133
Rear compartment
Setting the airflow ......................... 150
Setting the air vents ...................... 154
Setting the temperature ................ 149
Rear fog lamp
Display message ............................ 262
Switching on/off ........................... 130
Rear seats
Display message ............................ 277
Folding the backrest forwards/
back ............................................... 297
Rear sill protector ............................. 307
Rear view camera
Cleaning instructions ..................... 340
Function/notes ............................. 214
Switching on/off ........................... 214
Rear-view mirror
Anti-glare (manual) ........................ 122
Dipping (automatic) ....................... 124
Rear window blind ............................ 312
Rear window defroster
Problem (malfunction) ................... 152
Switching on/off ........................... 151
Rear window wiper
Replacing the wiper blade .............. 138
Switching on/off ........................... 137
Refrigerant (air-conditioning sys-
tem)
Important safety notes .................. 418
Refueling
Fuel gauge ....................................... 33
Important safety notes .................. 173
Refueling process .......................... 174
see Fuel
Remote control
Garage door opener ....................... 324
Programming (garage door
opener) .......................................... 325
16
Index
Replacing bulbs
Important safety notes .................. 134
Overview of bulb types .................. 135
Reporting safety defects .................... 28
Reserve (fuel tank)
see Fuel
Reserve fuel
Display message ............................ 267
Warning lamp ................................. 286
see Fuel
Residual heat (climate control) ........ 152
Restraint system
Display message ............................ 257
Introduction ..................................... 42
Warning lamp ................................. 285
Warning lamp (function) ................... 43
Reverse gear
Engaging (automatic transmis-
sion) ............................................... 165
Reversing feature
Panorama sliding sunroof .............. 104
Roller sunblinds ............................. 106
Side windows ................................... 99
Sliding sunroof ............................... 104
Trunk lid/tailgate ............................. 92
Reversing lamps (display mes-
sage) ................................................... 262
Roadside Assistance (breakdown) .... 25
Roller sunblind
Panorama roof with power tilt/
sliding panel .................................. 105
Rear side windows ......................... 311
Rear window .................................. 312
Roof carrier ........................................ 308
Roof lining and carpets (cleaning
guidelines) ......................................... 342
Roof load (maximum) ........................ 419
S
Safety
Children in the vehicle ..................... 62
Child restraint systems .................... 63
Occupant Classification System
(OCS) ............................................... 52
Safety system
see Driving safety systems
Seat belts
Adjusting the driver's and front-
passenger seat belt ......................... 47
Adjusting the height ......................... 46
center rear-compartment seat ......... 47
Cleaning ......................................... 342
Correct usage .................................. 45
Fastening ......................................... 46
Important safety guidelines ............. 44
Introduction ..................................... 44
Releasing ......................................... 47
Switching belt adjustment on/off
(on-board computer) ...................... 246
Warning lamp ................................. 280
Warning lamp (function) ................... 48
Seats
Adjusting (electrically) ................... 112
Adjusting the 4-way lumbar sup-
port ................................................ 115
Adjusting the active multicontour
seat ............................................... 114
Adjusting the head restraint .......... 112
Cleaning the cover ......................... 341
Correct driver's seat position ........ 110
Folding the backrest (rear com-
partment) forwards/back .............. 299
Important safety notes .................. 111
Overview ........................................ 111
Seat heating problem .................... 118
Seat ventilation problem ................ 119
Storing settings (memory func-
tion) ............................................... 125
Switching seat heating on/off ....... 117
Switching seat ventilation on/off .. 118
Selector lever
Cleaning ......................................... 341
Sensors (cleaning instructions) ....... 340
Service menu (on-board com-
puter) .................................................. 243
Service products
Brake fluid ..................................... 416
Coolant (engine) ............................ 417
DEF special additives ..................... 415
Engine oil ....................................... 415
Fuel ................................................ 412
Important safety notes .................. 411
Index
17
Refrigerant (air-conditioning sys-
tem) ...............................................418
Washer fluid ................................... 418
Settings
Factory (on-board computer) ......... 247
On-board computer ....................... 243
Setting the air distribution ...............149
Setting the airflow ............................ 150
SETUP (on-board computer) ............. 248
Side impact air bag .............................50
Side marker lamp (display mes-
sage) ................................................... 263
Side windows
Cleaning ......................................... 339
Convenience closing feature ..........101
Convenience opening feature ........100
Important safety information ........... 99
Opening/closing ............................ 100
Problem (malfunction) ................... 103
Resetting ....................................... 102
Skibag ................................................ 295
Sliding sunroof
Important safety notes .................. 103
Opening/closing ............................ 104
Problem (malfunction) ................... 108
Resetting ....................................... 105
see Panorama roof with power
tilt/sliding panel
SmartKey
Changing the battery ....................... 87
Changing the programming ............. 85
Checking the battery ....................... 87
Convenience closing feature .......... 101
Convenience opening feature ........100
Display message ............................ 278
Door central locking/unlocking ....... 84
Important safety notes .................... 84
Loss ................................................. 88
Mechanical key ................................ 86
Overview .......................................... 84
Positions (ignition lock) ................. 157
Problem (malfunction) ..................... 88
Starting the engine ........................ 160
Snow chains ...................................... 365
Sockets
Center console .............................. 314
General notes ................................ 314
Luggage compartment ................... 314
Rear compartment ......................... 314
Spare wheel
Stowing .......................................... 405
Specialist workshop ............................ 27
Special seat belt retractor .................. 63
Speed, controlling
see Cruise control
Speedometer
Digital ............................................ 236
In the Instrument cluster ................. 33
Segments ...................................... 233
Selecting the unit of measure-
ment .............................................. 243
see Instrument cluster
SPORT handling mode
Activating/deactivating (AMG
vehicles) .......................................... 76
Warning lamp ................................. 284
Standing lamps
Display message ............................ 262
Switching on/off ........................... 130
Start/stop function
see ECO start/stop function
Starting (engine) ................................ 159
STEER CONTROL .................................. 80
Steering (display message) .............. 277
Steering Assist and Stop&Go Pilot
(DISTRONIC PLUS)
Activating/deactivating ................. 242
Display message ............................ 272
Steering assistant STEER CON-
TROL
see STEER CONTROL
Steering wheel
Adjusting (electrically) ................... 119
Button overview ............................... 35
Buttons (on-board computer) ......... 233
Cleaning ......................................... 341
Important safety notes .................. 119
Paddle shifters ............................... 170
Steering wheel heating .................. 120
Storing settings (memory func-
tion) ............................................... 125
Steering wheel heating
Problem (malfunction) ................... 121
Switching on/off ........................... 120
18
Index
Steering wheel paddle shifters ........ 170
Stopwatch (RACETIMER) ...................248
Stowage areas ................................... 292
Stowage compartments
Armrest (under) .............................294
Center console .............................. 294
Cup holders ................................... 309
Eyeglasses compartment ...............293
Glove box ....................................... 293
Important safety information ......... 293
Rear ............................................... 295
Stowage net ................................... 295
Under driver's seat/front-
passenger seat .............................. 294
Stowage net ....................................... 295
Stowage well beneath the trunk
floor .................................................... 306
Summer tires ..................................... 364
Sun visor ............................................ 311
Surround lighting (on-board com-
puter) .................................................. 245
Suspension tuning
AIRMATIC ...................................... 203
AMG adaptive sport suspension
system ........................................... 204
SETUP (on-board computer) .......... 248
Switching air-recirculation mode
on/off ................................................. 152
T
Tachometer ........................................ 232
Tailgate
Display message ............................ 277
Emergency unlocking ....................... 98
Important safety notes .................... 91
Limiting the opening angle ............... 97
Opening/closing (automatically
from inside) ...................................... 96
Opening/closing (automatically
from outside) ................................... 93
Opening/closing (from outside) ....... 93
Opening dimensions ...................... 419
Tail lamps
Display message ............................ 262
Tank
see Fuel tank
Tank content
Fuel gauge ....................................... 33
Technical data
Capacities ...................................... 411
Emergency spare wheel ................. 407
Information .................................... 410
Tires/wheels ................................. 389
Vehicle data ................................... 419
TELEAID
Call priority .................................... 320
Downloading destinations
(COMAND) ..................................... 320
Downloading routes ....................... 323
Emergency call .............................. 317
General notes ................................ 316
Geo fencing ................................... 324
Locating a stolen vehicle ............... 322
MB info call button ........................ 319
Remote vehicle locking .................. 322
Roadside Assistance button .......... 318
Search & Send ............................... 321
Self-test ......................................... 317
Speed alert .................................... 324
System .......................................... 317
Triggering the vehicle alarm ........... 324
Vehicle remote malfunction diag-
nosis .............................................. 323
Vehicle remote unlocking .............. 321
Telephone
Accepting a call ............................. 239
Display message ............................ 278
Menu (on-board computer) ............ 239
Number from the phone book ........ 240
Redialing ........................................ 240
Rejecting/ending a call ................. 239
Telescopic rod (EASY-PACK load-
securing kit) ....................................... 305
Temperature
Coolant .......................................... 232
Coolant (on-board computer) ......... 247
Engine oil (on-board computer) ...... 247
Outside temperature ...................... 233
Setting (climate control) ................ 149
Through-loading feature ................... 297
Timing (RACETIMER) ......................... 248
TIREFIT kit .......................................... 346
Index
19
Tire pressure
Calling up (on-board computer) ..... 369
Checking manually ........................ 369
Display message ............................ 274
Important safety notes .................. 369
Maximum ....................................... 368
Notes ............................................. 367
Not reached (TIREFIT) .................... 348
Reached (TIREFIT) .......................... 348
Recommended ............................... 366
Tire pressure monitor
Checking the tire pressure elec-
tronically ........................................ 371
Function/notes ............................. 369
General notes ................................ 369
Important safety notes .................. 369
Radio type approval for the tire
pressure monitor ........................... 372
Restarting ...................................... 371
Warning lamp ................................. 290
Warning message .......................... 371
Tires
Aspect ratio (definition) ................. 383
Average weight of the vehicle
occupants (definition) .................... 382
Bar (definition) ............................... 381
Changing a wheel .......................... 384
Characteristics .............................. 381
Checking ........................................ 363
Curb weight (definition) ................. 383
Definition of terms ......................... 381
Direction of rotation ...................... 384
Display message ............................ 274
Distribution of the vehicle occu-
pants (definition) ............................ 384
DOT, Tire Identification Number
(TIN) ............................................... 381
DOT (Department of Transporta-
tion) (definition) ............................. 382
GAWR (Gross Axle Weight Rating)
(definition) ..................................... 382
GVW (Gross Vehicle Weight) (def-
inition) ........................................... 382
GVWR (Gross Vehicle Weight Rat-
ing) (definition) .............................. 382
Important safety notes .................. 362
Increased vehicle weight due to
optional equipment (definition) ...... 382
Kilopascal (kPa) (definition) ........... 382
Labeling (overview) ........................ 378
Load bearing index (definition) ...... 383
Load index ..................................... 380
Load index (definition) ................... 382
Maximum loaded vehicle weight
(definition) ..................................... 382
Maximum load on a tire (defini-
tion) ............................................... 383
Maximum permissible tire pres-
sure (definition) ............................. 383
Maximum tire load ......................... 380
Maximum tire load (definition) ....... 383
MOExtended tires .......................... 364
Optional equipment weight (defi-
nition) ............................................ 383
PSI (pounds per square inch) (def-
inition) ........................................... 383
Replacing ....................................... 384
Service life ..................................... 364
Sidewall (definition) ....................... 383
Speed rating (definition) ................ 382
Storing ........................................... 384
Structure and characteristics
(definition) ..................................... 381
Temperature .................................. 377
TIN (Tire Identification Number)
(definition) ..................................... 383
Tire bead (definition) ...................... 383
Tire pressure (definition) ................ 383
Tire pressures (recommended) ...... 382
Tire size (data) ............................... 389
Tire size designation, load-bearing
capacity, speed rating .................... 378
Tire tread ....................................... 363
Tire tread (definition) ..................... 383
Total load limit (definition) ............. 384
Traction ......................................... 377
Traction (definition) ....................... 383
Tread wear ..................................... 377
Uniform Tire Quality Grading
Standards ...................................... 376
Uniform Tire Quality Grading
Standards (definition) .................... 382
Wear indicator (definition) ............. 383
Wheel and tire combination ........... 391
Wheel rim (definition) .................... 382
see Flat tire
20
Index
Top Tether ............................................ 65
Towing away
Important safety guidelines ........... 355
Installing the towing eye ................ 356
Removing the towing eye ............... 356
With both axles on the ground ....... 357
With the rear axle raised ................ 357
Towing eye ......................................... 344
Tow-starting
Emergency engine starting ............ 358
Important safety notes .................. 355
Transfer case ..................................... 173
Transmission
see Automatic transmission
Transmission position display ......... 166
Transmission position display
(DIRECT SELECT lever) ...................... 166
Transporting the vehicle .................. 357
Trim pieces (cleaning instruc-
tions) .................................................. 341
Trip computer (on-board com-
puter) .................................................. 235
Trip odometer
Calling up ....................................... 235
Resetting (on-board computer) ...... 236
Trunk
Emergency release .......................... 98
Important safety notes .................... 91
Locking separately ........................... 97
Opening/closing (automatically
from inside) ...................................... 96
Opening/closing (automatically
from outside) ................................... 93
Opening/closing (from outside,
HANDS-FREE ACCESS) .................... 94
Opening/closing (manually from
outside) ............................................ 93
Trunk lid
Display message ............................ 277
Opening dimensions ...................... 419
Trunk load (maximum) ...................... 419
Turn signals
Changing bulbs (front) ................... 136
Display message ............................ 261
Switching on/off ........................... 130
Type identification plate
see Vehicle identification plate
U
Unlocking
Emergency unlocking ....................... 91
From inside the vehicle (central
unlocking button) ............................. 90
V
Vanity mirror (in the sun visor) ........ 311
Vehicle
Correct use ...................................... 28
Data acquisition ............................... 29
Display message ............................ 276
Equipment ....................................... 24
Individual settings .......................... 243
Limited Warranty ............................. 28
Loading .......................................... 372
Locking (in an emergency) ............... 91
Locking (SmartKey) .......................... 84
Lowering ........................................ 389
Maintenance .................................... 25
Parking for a long period ................ 181
Pulling away ................................... 160
Raising ........................................... 386
Reporting problems .........................28
Securing from rolling away ............ 385
Towing away .................................. 355
Transporting .................................. 357
Unlocking (in an emergency) ........... 91
Unlocking (SmartKey) ...................... 84
Vehicle data ................................... 419
Vehicle data ....................................... 419
Vehicle dimensions ........................... 419
Vehicle emergency locking ................ 91
Vehicle identification number
see VIN
Vehicle identification plate .............. 410
Vehicle level
AIRMATIC ...................................... 202
Vehicle level (display message) ....... 268
Vehicle maintenance
see ASSYST PLUS
Vehicle tool kit .................................. 344
Video
Operating the DVD ......................... 239
VIN ...................................................... 410
Index
21
W
Warning and indicator lamps
ABS ................................................ 282
Brakes ...........................................281
Check Engine ................................. 286
Coolant .......................................... 287
Distance warning ........................... 289
ESP
®
.............................................. 283
ESP
®
OFF ....................................... 284
Overview .......................................... 34
PASSENGER AIR BAG OFF ...............43
Reserve fuel ...................................286
Restraint system ............................ 285
Seat belt ........................................ 280
SPORT handling mode ................... 284
Tire pressure monitor .................... 290
Warranty .............................................. 24
Washer fluid
Display message ............................ 278
Wheel and tire combination
see Tires
Wheel bolt tightening torque ........... 389
Wheel chock ...................................... 385
Wheels
Changing a wheel .......................... 384
Checking ........................................ 363
Cleaning ......................................... 338
Cleaning (warning) ......................... 384
Emergency spare wheel ................. 404
Important safety notes .................. 362
Interchanging/changing ................ 384
Mounting a new wheel ................... 388
Mounting a wheel .......................... 385
Removing a wheel .......................... 388
Storing ...........................................384
Tightening torque ........................... 389
Wheel size/tire size ....................... 389
Window curtain air bag
Operation ......................................... 51
Windows
see Side windows
Windshield
Defrosting ...................................... 150
Windshield washer fluid
see Windshield washer system
Windshield washer system
Adding washer fluid ....................... 334
Notes ............................................. 418
Windshield wipers
Problem (malfunction) ................... 139
Rear window wiper ........................ 137
Replacing the wiper blades ............ 137
Switching on/off ........................... 136
Winter driving
Important safety notes .................. 364
Slippery road surfaces ................... 186
Snow chains .................................. 365
Winter operation
Radiator cover ............................... 331
Winter tires
M+S tires ....................................... 364
Wiper blades
Cleaning ......................................... 339
Important safety notes .................. 137
Replacing (rear window) ................ 138
Replacing (windshield) ................... 137
Wooden trim (cleaning instruc-
tions) .................................................. 341
Workshop
see Qualified specialist workshop
Z
ZONE function
Switching on/off ........................... 150
22
Index
Protection of the environment
General notes
H
Environmental note
Daimler's declared policy is one of compre-
hensive environmental protection.
The objectives are for the natural resources
that form the basis of our existence on this
planet to be used sparingly and in a manner
that takes the requirements of both nature
and humanity into account.
You too can help to protect the environment
by operating your vehicle in an environmen-
tally responsible manner.
Fuel consumption and the rate of engine,
transmission, brake and tire wear are affected
by these factors:
R
operating conditions of your vehicle
R
your personal driving style
You can influence both factors. You should
bear the following in mind:
Operating conditions:
R
avoid short trips as these increase fuel con-
sumption.
R
always make sure that the tire pressures
are correct.
R
do not carry any unnecessary weight.
R
remove roof racks once you no longer need
them.
R
a regularly serviced vehicle will contribute
to environmental protection. You should
therefore adhere to the service intervals.
R
always have service work carried out at a
qualified specialist workshop.
Personal driving style:
R
do not depress the accelerator pedal when
starting the engine.
R
do not warm up the engine when the vehicle
is stationary.
R
drive carefully and maintain a safe distance
from the vehicle in front.
R
avoid frequent, sudden acceleration and
braking.
R
change gear in good time and use each gear
only up to Ô of its maximum engine speed.
R
switch off the engine in stationary traffic.
R
keep an eye on the vehicle's fuel consump-
tion.
Environmental concerns and recom-
mendations
Wherever the operating instructions require
you to dispose of materials, first try to regen-
erate or re-use them. Observe the relevant
environmental rules and regulations when
disposing of materials. In this way you will
help to protect the environment.
Genuine Mercedes-Benz parts
H
Environmental note
Daimler AG also supplies reconditioned major
assemblies and parts which are of the same
quality as new parts. They are covered by the
same Limited Warranty entitlements as new
parts.
!
Air bags and Emergency Tensioning Devi-
ces, as well as control units and sensors for
these restraint systems, may be installed in
the following areas of your vehicle:
R
doors
R
door pillars
R
door sills
R
seats
R
cockpit
R
instrument cluster
R
center console
Do not install accessories such as audio
systems in these areas. Do not carry out
repairs or welding. You could impair the
operating efficiency of the restraint sys-
tems.
Have aftermarket accessories installed at a
qualified specialist workshop.
Introduction
23
Z
You could jeopardize the operating safety of
your vehicle if you use parts, tires and wheels
as well as accessories relevant to safety
which have not been approved by Mercedes.
This could lead to malfunctions in safety-rel-
evant systems, e.g. the brake system. Use
only genuine Mercedes-Benz parts or parts of
equal quality. Only use tires, wheels and
accessories that have been specifically
approved for your vehicle.
Genuine Mercedes-Benz parts are subject to
strict quality control. Every part has been spe-
cifically developed, manufactured or selected
for and adapted to Mercedes-Benz vehicles.
Only genuine Mercedes-Benz parts should
therefore be used.
More than 300,000 different genuine
Mercedes-Benz parts are available for
Mercedes-Benz models.
All authorized Mercedes-Benz Centers main-
tain a supply of genuine Mercedes-Benz parts
for necessary service and repair work. In addi-
tion, strategically located parts delivery cen-
ters provide quick and reliable parts service.
Always specify the vehicle identification num-
ber (VIN) when ordering genuine Mercedes-
Benz parts (Y page 410).
Operator's Manual
Vehicle equipment
This Operator's Manual describes all models
and all standard and optional equipment of
your vehicle available at the time of going to
print. Country-specific differences are possi-
ble. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions. The equipment in your vehicle may
therefore differ from that shown in the
descriptions and illustrations.
The original purchase agreement lists all sys-
tems installed in your vehicle.
Should you have any questions concerning
equipment and operation, please consult an
authorized Mercedes-Benz Center.
The Operator's Manual and Maintenance
Booklet are important documents and should
be kept in the vehicle.
Service and vehicle operation
Warranty
The implied warranty for your vehicle applies
in accordance with the warranty terms and
conditions in the Service and Warranty Infor-
mation booklet.
Your authorized Mercedes-Benz Center will
replace and repair all factory-installed parts in
accordance with the following warranty terms
and conditions:
R
New Vehicle Limited Warranty
R
Emission System Warranty
R
Emission Performance Warranty
R
California, Connecticut, Maine, Massachu-
setts, New York, Pennsylvania, Rhode
Island and Vermont Emission Control Sys-
tem Warranty
R
State warranty enforcement laws (lemon
laws)
Replacement parts and accessories are cov-
ered by the Mercedes-Benz Parts and Acces-
sories warranties. These are available at any
authorized Mercedes-Benz Center.
i
Should you lose your Service and War-
ranty Information booklet, have an author-
ized Mercedes-Benz Center arrange for a
replacement. The new Service and War-
ranty Information booklet will be posted to
you.
24
Introduction
Information for customers in Califor-
nia
Under California law you may be entitled to a
replacement of your vehicle or a refund of the
purchase price or lease price, if after a rea-
sonable number of repair attempts
Mercedes-Benz USA, LLC and/or its author-
ized repair or service facilities fail to fix one or
more substantial defects or malfunctions in
the vehicle that are covered by its express
warranty. During the period of 18 months
from original delivery of the vehicle or the
accumulation of 18,000 miles (approximately
29,000 km) on the odometer of the vehicle,
whichever occurs first, a reasonable number
of repair attempts is presumed for a retail
buyer or lessee if one or more of the following
occurs:
(1) the same substantial defect or malfunc-
tion results in a condition that is likely to
cause death or serious bodily injury if the
vehicle is driven, that defect or malfunc-
tion has been subject to repair two or
more times, and you have directly noti-
fied Mercedes-Benz USA, LLC in writing
of the need for its repair,
(2) the same substantial defect or malfunc-
tion of a less serious nature than cate-
gory (1) has been subject to repair four or
more times and you have directly notified
us in writing of the need for its repair, or
(3) the vehicle is out of service by reason of
repair of the same or different substantial
defects or malfunctions for a cumulative
total of more than 30 calendar days.
Please send your written notice to:
Mercedes-Benz USA, LLC
Customer Assistance Center
One Mercedes Drive
Montvale, NJ 07645-0350
Maintenance
The Service and Warranty Booklet describes
all the necessary maintenance work which
should be done at regular intervals.
Always have the Service and Warranty Book-
let with you when you bring the vehicle to an
authorized Mercedes-Benz Center. The ser-
vice advisor will record every service for you
in the Service and Warranty Booklet.
Roadside Assistance
The Mercedes-Benz Roadside Assistance
Program offers technical help in the event of a
breakdown. Calls to the toll-free Roadside
Assistance Hotline are answered by our
agents 24 hours a day, 365 days a year.
1-800-FOR-MERCedes(1-800-367-6372)
(USA)
1-800-387-0100 (Canada)
For additional information, refer to the
Mercedes-Benz Roadside Assistance Pro-
gram brochure (USA) or the "Roadside Assis-
tance" section in the Service and Warranty
booklet (Canada). You will find both in your
vehicle literature portfolio.
Change of address or change of own-
ership
In the event of a change of address, please
send us the "Notification of Address Change"
in the Service and Guarantee booklet or sim-
ply call the Mercedes-Benz Customer Assis-
tance Center (USA) at the hotline number
1-800-FOR-MERCedes(1-800-367-6372) or
Customer Service Center (Canada) at
1-800-387-0100. This will assist us in con-
tacting you in a timely manner should the
need arise.
If you sell your Mercedes, please leave the
entire literature in the vehicle so that it is
available to the next owner.
If you have purchased a used car, please send
us the "Notification of Used Car Purchase" in
Introduction
25
Z
the Service and Guarantee booklet or simply
call the Mercedes-Benz Customer Assistance
Center (USA) at the hotline number
1-800-FOR-MERCedes(1-800-367-6372) or
Customer Service (Canada) at
1-800-387-0100.
Vehicle operation outside the USA
and Canada
If you plan to operate your vehicle in foreign
countries, please be aware that:
R
service facilities or replacement parts may
not be readily available.
R
unleaded fuel for vehicles with a catalytic
converter may not be available. Leaded fuel
may cause damage to the catalytic con-
verter.
R
the fuel may have a considerably lower
octane rating. Unsuitable fuel can cause
engine damage.
Some Mercedes-Benz models are available
for delivery in Europe through our European
Delivery Program. For details, consult an
authorized Mercedes-Benz Center or write to
one of the following addresses.
In the USA
Mercedes-Benz USA, LLC
European Delivery Department
One Mercedes Drive
Montvale, NJ 07645-0350
In Canada
Mercedes-Benz Canada, Inc.
European Delivery Department
98 Vanderhoof Avenue
Toronto, Ontario M4G 4C9
Operating safety
Important safety notes
G
WARNING
If you do not have the prescribed service/
maintenance work or any required repairs
carried out, this can result in malfunctions or
system failures. There is a risk of an accident.
Always have the prescribed service/mainte-
nance work as well as any required repairs
carried out at a qualified specialist workshop.
G
WARNING
Flammable material such as leaves, grass or
twigs may ignite if they come into contact with
hot parts of the exhaust system. There is a risk
of fire.
When driving off road or on unpaved roads,
check the vehicle's underside regularly. In
particular, remove parts of plants or other
flammable materials which have become
trapped. In the case of damage, contact a
qualified specialist workshop.
G
WARNING
Modifications to electronic components, their
software as well as wiring can impair their
function and/or the function of other net-
worked components. In particular, systems
relevant to safety could also be affected. As a
result, these may no longer function as inten-
ded and/or jeopardize the operating safety of
the vehicle. There is an increased risk of an
accident and injury.
Never tamper with the wiring as well as elec-
tronic components or their software. You
should have all work to electrical and elec-
tronic equipment carried out at a qualified
specialist workshop.
If you make any changes to the vehicle elec-
tronics, the general operating permit is ren-
dered invalid.
!
There is a risk of damage to the vehicle if:
R
the vehicle becomes stuck, e.g. on a high
curb or an unpaved road
R
you drive too fast over an obstacle, e.g. a
curb or a hole in the road
R
a heavy object strikes the undercarriage
or parts of the chassis
26
Introduction
In situations like this, the body, the under-
carriage, chassis parts, wheels or tires
could be damaged without the damage
being visible. Components damaged in this
way can unexpectedly fail or, in the case of
an accident, no longer withstand the strain
they are designed to.
If the underbody paneling is damaged,
combustible materials such as leaves,
grass or twigs can gather between the
underbody and the underbody paneling. If
these materials come in contact with hot
parts of the exhaust system, they can catch
fire.
In such situations, have the vehicle
checked and repaired immediately at a
qualified specialist workshop. If on con-
tinuing your journey you notice that driving
safety is impaired, pull over and stop the
vehicle immediately, paying attention to
road and traffic conditions. In such cases,
visit a qualified specialist workshop.
Declarations of conformity
Vehicle components which receive
and/or transmit radio waves
USA: "The wireless devices of this vehicle
comply with Part 15 of the FCC Rules. Oper-
ation is subject to the following two condi-
tions: 1) These devices may not cause harm-
ful interference, and 2) These devices must
accept any interference received, including
interference that may cause undesired oper-
ation. Changes or modifications not expressly
approved by the party responsible for com-
pliance could void the user’s authority to
operate the equipment."
Canada: "The wireless devices of this vehicle
comply with Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions: (1) These devices
may not cause interference, and (2) These
devices must accept any interference, includ-
ing interference that may cause undesired
operation of the device."
Diagnostics connection
The diagnostics connection is only intended
for the connection of diagnostic equipment at
a qualified specialist workshop.
G
WARNING
If you connect equipment to the diagnostics
connection in the vehicle, it may affect the
operation of the vehicle systems. As a result,
the operating safety of the vehicle could be
affected. There is a risk of an accident.
Do not connect any equipment to a diagnos-
tics connection in the vehicle.
G
WARNING
Objects in the driver's footwell can restrict the
pedal travel or obstruct a depressed pedal.
The operating and road safety of the vehicle is
jeopardized. There is a risk of an accident.
Make sure that all objects in the vehicle are
stowed correctly, and that they cannot enter
the driver's footwell. Install the floormats
securely and as specified in order to ensure
sufficient clearance for the pedals. Do not use
loose floormats and do not place floormats on
top of one another.
!
If the engine is switched off and equip-
ment on the diagnostics connection is
used, the starter battery may discharge.
Connecting equipment to the diagnostics
connection can lead to emissions monitoring
information being reset, for example. This
may lead to the vehicle failing to meet the
requirements of the next emissions test dur-
ing the main inspection.
Qualified specialist workshop
An authorized Mercedes-Benz Center is a
qualified specialist workshop. It has the nec-
essary specialist knowledge, tools and quali-
fications to correctly carry out the work
required on your vehicle. This is especially the
case for work relevant to safety.
Introduction
27
Z
Observe the notes in the Maintenance Book-
let.
Always have the following work carried out at
an authorized Mercedes-Benz Center:
R
work relevant to safety
R
service and maintenance work
R
repair work
R
alterations, installation work and modifica-
tions
R
work on electronic components
Correct use
If you remove any warning stickers, you or
others could fail to recognize certain dangers.
Leave warning stickers in position.
Observe the following information when driv-
ing your vehicle:
R
the safety notes in this manual
R
the Technical Data section in this manual
R
traffic rules and regulations
R
laws and safety standards pertaining to
motor vehicles
Problems with your vehicle
If you should experience a problem with your
vehicle, particularly one that you believe may
affect its safe operation, we urge you to con-
tact an authorized Mercedes-Benz Center
immediately to have the problem diagnosed
and rectified. If the problem is not resolved to
your satisfaction, please discuss the problem
again with a Mercedes-Benz Center or con-
tact us at one of the following addresses.
In the USA
Customer Assistance Center
Mercedes-Benz USA, LLC
One Mercedes Drive
Montvale, NJ 07645-0350
In Canada
Customer Relations Department
Mercedes-Benz Canada, Inc.
98 Vanderhoof Avenue
Toronto, Ontario M4G 4C9
Reporting safety defects
USA only:
The following text is published as required of
manufacturers under Title 49, Code of U.S.
Federal Regulations, Part 575 pursuant to the
"National Traffic and Motor Vehicle Safety Act
of 1966".
If you believe that your vehicle has a defect
which could cause a crash or could cause
injury or death, you should immediately
inform the National Highway Traffic Safety
Administration (NHTSA) in addition to notify-
ing Mercedes-Benz USA, LLC.
If NHTSA receives similar complaints, it may
open an investigation, and if it finds that a
safety defect exists in a group of vehicles, it
may order a recall and remedy campaign.
However, NHTSA cannot become involved in
individual problems between you, your
dealer, or Mercedes-Benz USA, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at
1-888-327-4236(TTY: 1-800-424-9153); go
to http://www.safercar.gov; or write to:
Administrator, NHTSA, 400 Seventh Street,
SW., Washington, DC 20590.
You can also obtain other information about
motor vehicle safety from
http://www.safercar.gov
Limited Warranty
!
Follow the instructions in this manual
about the proper operation of your vehicle
as well as about possible vehicle damage.
Damage to your vehicle that arises from
culpable contraventions against these
instructions is not covered either by the
Mercedes-Benz Limited Warranty or by the
New or Used-Vehicle Warranty.
28
Introduction
Data stored in the vehicle
Data recording
This vehicle is capable of recording diagnostic
information relating to vehicle operation, mal-
functions, and user settings. This may include
information about the performance or status
of various systems, including but not limited
to, engine, throttle, steering or brake sys-
tems, that is stored and can be read out with
suitable devices, particularly when the vehi-
cle is serviced. The data obtained is used to
properly diagnose and service your vehicle or
to further optimize and develop vehicle func-
tions.
COMAND/mbrace (Canada: TELEAID)
If the vehicle is equipped with COMAND or
mbrace, additional data about the vehicle’s
operation, the use of the vehicle in certain
situations, and the location of the vehicle may
be compiled through COMAND or the mbrace
system.
For additional information please refer to the
COMAND User Manual and/or the mbrace
Terms and Conditions.
Event data recorders
This vehicle is equipped with an event data
recorder (EDR). The main purpose of an EDR
is to record data that will assist in under-
standing how a vehicle’s systems performed
in certain crash or near crash-like situations,
such as during air bag deployment or when
hitting a road obstacle. The EDR is designed
to record data related to vehicle dynamics
and safety systems for a short period of time,
typically 30 seconds or less.
The EDR in this vehicle is designed to record
such data as:
R
how various systems in your vehicle are
operating
R
whether or not the driver and passenger
seat belts are fastened
R
how far (if at all) the driver is depressing the
accelerator and/or brake pedal and
R
how fast the vehicle is traveling
This data can help provide a better under-
standing of the circumstances in which
crashes and injuries occur. NOTE: EDR data is
recorded by your vehicle only if a non-trivial
crash situation occurs; no data is recorded by
the EDR under normal driving conditions and
no personal data (e.g., name, gender, age,
and crash location) are recorded. However,
other parties, such as law enforcement, can
combine the EDR data with the type of per-
sonal identification data routinely acquired
during a crash investigation.
To read data recorded by an EDR, special
equipment is required, and access to the vehi-
cle or the EDR is needed. In addition to the
vehicle manufacturer, other parties that have
the special equipment, such as law enforce-
ment, can read the information by accessing
the vehicle or the EDR.
EDR data may be used in civil and criminal
matters as a tool in accident reconstruction,
accident claims, and vehicle safety. Since the
Crash Data Retrieval CDR tool that is used to
extract data from the EDR is commercially
available, Mercedes-Benz USA, LLC
("MBUSA") expressly disclaims any and all lia-
bility arising from the extraction of this infor-
mation by unauthorized Mercedes-Benz per-
sonnel.
MBUSA will not share EDR data with others
without the consent of the vehicle owners or,
if the vehicle is leased, without the consent of
the lessee. Exceptions to this representation
include responses to subpoenas by law
enforcement; by federal, state or local gov-
ernment; in connection with or arising out of
litigation involving MBUSA or its subsidiaries
and affiliates; or, as required by law.
Warning: The EDR is a component of the
Restraint System Module. Tampering with,
altering, modifying or removing the EDR com-
ponent may result in a malfunction of the
Restraint System Module and other systems.
Introduction
29
Z
State laws or regulations regarding EDRs that
conflict with federal regulation are pre-emp-
ted. This means that in the event of such con-
flict, the federal regulation governs. As of
February 2013, 13 states have enacted laws
relating to EDRs.
Information on copyright
General information
Information on license for free and open-
source software used in your vehicle and its
electronic components is available on the fol-
lowing website:
http://www.mercedes-benz.com/
opensource
30
Introduction
Cockpit ................................................. 32
Instrument cluster .............................. 33
Multifunction steering wheel ............. 35
Center console .................................... 36
Overhead control panel ...................... 39
Door control panel .............................. 40
31
At a glance
Cockpit
Function Page
:
Steering wheel paddle
shifters 170
;
Combination switch 130
=
Instrument cluster 33
?
Horn
A
DIRECT SELECT lever 166
B
PARKTRONIC warning dis-
play 206
C
Overhead control panel 39
D
Climate control systems 142
E
Ignition lock 157
Start/Stop button 158
Function Page
F
Adjusts the steering wheel
electrically 119
Steering wheel heating 120
G
Cruise control lever 187
H
Parking brake 180
I
Diagnostics connection 27
J
Opens the hood 330
K
Releases the parking brake 180
L
Light switch 128
32
Cockpit
At a glance
Instrument cluster
Displays
Function Page
:
Fuel level and fuel filler flap
location indicator 8
;
Coolant temperature 232
=
Speedometer with seg-
ments 233
Function Page
?
Multifunction display with
outside temperature dis-
play 234
A
Tachometer 232
Fuel filler flap location indicator 8: the fuel
filler cap is on the right-hand side.
i
Adjust the instrument cluster lighting
using the on-board computer
(Y page 244).
Instrument cluster
33
At a glance
Warning and indicator lamps
Function Page
:
÷ ESP
®
283
M SPORT handling
mode in AMG vehicles 284
;
· Distance warning
289
=
å ESP
®
OFF
283
?
$ Brakes (USA only)
281
A
#! Turn signals
130
B
J Brakes (Canada only)
281
C
! ABS
282
D
6 Restraint system
42
E
; Check Engine
286
F
h Tire pressure monitor
290
Function Page
G
ü Seat belt
280
H
% Diesel engine: pre-
glow 160
÷ ESP
®
in AMG vehicles
284
I
? Coolant
287
J
K High-beam head-
lamps
130
K
L Low-beam head-
lamps 129
L
T Parking lamps
130
M
R This lamp has no func-
tion
N
8 Reserve fuel
286
34
Instrument cluster
At a glance
Multifunction steering wheel
Function Page
:
Multifunction display 234
;
COMAND display (see the
separate operating instruc-
tions)
= ?
Switches on the Voice Con-
trol System (see the sepa-
rate operating instructions)
? ~
Rejects or ends a call 239
Exits phone book/redial
memory
6
Makes or accepts a call
Switches to the redial mem-
ory
WX
Adjusts the volume
8
Mute
Function Page
A
=;
Selects a menu 233
9:
Selects a submenu or
scrolls through lists 233
a
Confirms your selection 233
Hides display messages 251
B %
Back 233
Switches off the Voice Con-
trol System (see the sepa-
rate operating instructions)
Multifunction steering wheel
35
At a glance
Center console
Center console, upper section
Function Page
:
COMAND; see the separate
operating instructions
;
c Seat heating
117
=
s Seat ventilation
118
?
c PARKTRONIC
206
A
¤ ECO start/stop func-
tion (AMG vehicles)
161
B
£ Hazard warning
lamps 131
Function Page
C
45Indicator lamp
52
D
ATA indicator lamp 81
E
Ü Lowers the rear seat
head restraints (Wagon) 113
F
u Sedan: rear window
roller sunblind 312
36
Center console
At a glance
Center console, lower section
Function Page
G
Stowage compartment 293
Ashtray 312
Cigarette lighter 313
Cup holder 309
H
e Adjusts the suspen-
sion setting
203
I
É Sets the vehicle level
202
Function Page
J
Stowage compartment with
Media Interface 294
K
Ú Selects the drive pro-
gram
169
L
COMAND controller; see
the separate operating
instructions
Center console
37
At a glance
Center console, lower section (AMG vehicles)
Function Page
G
Ashtray 312
Cigarette lighter 313
H
Engages parking position P
180
I
Selector lever 165
J
Cup holder 309
K
Stowage compartment with
Media Interface 294
L
COMAND controller; see
the separate operating
instructions
Function Page
M
ß Calls up/saves the
suspension tuning
204
N
à Adjusts the suspen-
sion setting 204
O
å ESP
®
76
P
Drive program selector 169
38
Center console
At a glance
Overhead control panel
Function Page
:
u Switches the rear
interior lighting on/off
134
;
| Switches the auto-
matic interior lighting con-
trol on/off 134
=
p Switches the right-
hand reading lamp on/off 133
?
3 Opens/closes the
sliding sunroof
104
3 Opens/closes the
panorama roof with power
tilt/sliding panel with roller
sunblinds 105
A
ï MB Info call button
(mbrace system)
319
B
G SOS button (mbrace
system) 317
Function Page
C
Rear-view mirror 124
D
Buttons for the garage door
opener 325
E
Microphone for mbrace
(emergency call system),
telephone and the Voice
Control System; see the
separate operating instruc-
tions
F
F Roadside Assistance
call button (mbrace sys-
tem)
318
G
p Switches the left-
hand reading lamp on/off 133
H
c Switches the front
interior lighting on/off 134
Overhead control panel
39
At a glance
Door control panel
Function Page
:
r 45=
Stores settings for the seat,
exterior mirrors and steer-
ing wheel
125
;
Adjusts the seats electri-
cally 112
=
%&Unlocks/locks
the vehicle 90
?
Opens the door 89
A
7Zö\
Adjusts and folds the exte-
rior mirrors in/out electri-
cally 122
Function Page
B
W Opens/closes the
side windows 100
C
n Activates/deacti-
vates the override feature
for the side windows in the
rear compartment 68
D
p Opens/closes the
trunk lid/tailgate 96
40
Door control panel
At a glance
Useful information .............................. 42
Panic alarm .......................................... 42
Occupant safety .................................. 42
Children in the vehicle ........................ 62
Pets in the vehicle .............................. 68
Driving safety systems ....................... 69
Protection against theft ..................... 80
41
Safety
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Panic alarm
X
To activate: press ! button : for at
least one second.
An alarm sounds and the exterior lighting
flashes.
X
To deactivate: press ! button :
again.
or
X
Insert the SmartKey into the ignition lock.
or, on vehicles with KEYLESSGO:
X
Press the Start/Stop button.
The SmartKey must be in the vehicle.
Occupant safety
Restraint system: introduction
The restraint system reduces the risk of vehi-
cle occupants coming into contact with parts
of the vehicle's interior in the event of an
accident. The restraint system can also
reduce the forces to which vehicle occupants
are subjected during an accident.
The restraint system comprises:
R
Seat belt system
R
Air bags
R
Child restraint system
R
Child seat securing systems
The components of the restraint system work
in conjunction with each other. They can only
deploy their protective function if, at all times,
all vehicle occupants:
R
have fastened their seat belts correctly
(Y page 45)
R
have adjusted their seat and head restraint
properly (Y page 111).
As the driver, you also have to make sure that
the steering wheel is adjusted correctly.
Observe the information relating to the cor-
rect driver's seat position (Y page 110).
You also have to make sure that an air bag can
inflate properly if deployed (Y page 48).
An air bag supplements a correctly worn seat
belt. As an additional safety device, the air
bag increases the level of protection for vehi-
cle occupants in the event of an accident. For
example, if, in the event of an accident, the
protection offered by the seat belt is suffi-
cient, the air bags are not deployed. When an
accident occurs, only the air bags that
increase protection in that particular accident
situation are deployed. However, seat belts
and air bags generally do not protect against
objects penetrating the vehicle from the out-
side.
Information on restraint system operation
can be found under "Triggering of the Emer-
gency Tensioning Device and air bags"
(Y page 57).
42
Occupant safety
Safety
For more information about children traveling
with you in the vehicle and on child restraint
systems, see "Children in the vehicle"
(Y page 62).
Important safety notes
G
WARNING
Modifications to the restraint system may
cause it to no longer work as intended. The
restraint system may then not perform its
intended protective function and may fail in an
accident or trigger unexpectedly, for example.
This poses an increased risk of injury or even
fatal injury.
Never modify parts of the restraint system.
Never tamper with the wiring, the electronic
components or their software.
If it is necessary to modify an air bag system to
accommodate a person with disabilities, con-
tact an authorized Mercedes-Benz Center for
details. USA only: for further information con-
tact our Customer Assistance Center at
1-800-FOR-MERCedes (18003676372).
Restraint system warning lamp
The functions of the restraint system are
checked after the ignition is switched on and
at regular intervals while the engine is run-
ning. Therefore, malfunctions can be detec-
ted in good time.
The 6 restraint system warning lamp in
the instrument cluster lights up when the igni-
tion is switched on. It goes out no later than a
few seconds after the engine is started. The
components of the restraint system are in
operational readiness.
A malfunction has occurred if the 6
restraint system warning lamp:
R
does not light up after the ignition is
switched on
R
does not go out after a few seconds with
the engine running
R
lights up again while the engine is running
G
WARNING
If restraint system is malfunctioning, restraint
system components may be triggered unin-
tentionally or might not be triggered at all in
the event of an accident with a high rate of
vehicle deceleration. This can affect the Emer-
gency Tensioning Device or air bag, for exam-
ple. This poses an increased risk of injury or
even fatal injury.
Have the restraint system checked and
repaired in a qualified specialist workshop as
soon as possible.
PASSENGER AIR BAG OFF indicator
lamp
PASSENGER AIR BAG OFF indicator lamp :
is part of the Occupant Classification System
(OCS).
The PASSENGER AIR BAG OFF indicator lamp
informs you about the status of the front-
passenger front air bag.
If the PASSENGER AIR BAG OFF indicator
lamp:
R
is lit: the front-passenger front air bag is
deactivated. It will then not be deployed in
the event of an accident.
R
does not light up: the front-passenger
front air bag is enabled. If, in the event of an
accident, all deployment criteria are met,
the front-passenger front air bag is
deployed.
Occupant safety
43
Safety
Z
Depending on the person in the front-
passenger seat, the front-passenger front air
bag must either be disabled or enabled; see
the following points. You must make sure of
this both before and during a journey.
R
Children in a child restraint system:
whether the front-passenger front air bag is
enabled or deactivated depends on the
installed child restraint system, and the age
and size of the child. Therefore, be sure to
observe the notes on the "Occupant Clas-
sification System (OCS)" (Y page 52) and
on "Children in the vehicle" (Y page 62).
There you will also find instructions on rear-
ward and forward-facing child restraint sys-
tems on the front-passenger seat.
R
All other persons: depending on the clas-
sification of the person in the front-
passenger seat, the front-passenger front
air bag is enabled or deactivated
(Y page 52). Be sure to observe the notes
on "Seat belts“ (Y page 44) and "Air bags"
(Y page 48). There you can also find infor-
mation on the correct seat position.
Seat belts
Introduction
Seat belts are the most effective means of
restricting the movement of vehicle occu-
pants in the event of an accident or the vehi-
cle rolling over. This reduces the risk of vehi-
cle occupants coming into contact with parts
of the vehicle interior or being ejected from
the vehicle. Furthermore, the seat belt helps
to keep the vehicle occupant in the best posi-
tion in relation to the air bag.
The seat belt system comprises:
R
Seat belts
R
Emergency Tensioning Devices for the
front seat belts and the outer seat belts in
the rear
R
Seat belt force limiters for the front seat
belts and the outer seat belts in the rear
If the seat belt is pulled out of the belt outlet
quickly or with a jerky movement, the belt
retractor locks. The belt strap cannot be
extracted any further.
The Emergency Tensioning Device tightens
the seat belt in an accident, pulling the belt
close against the body. However it does not
pull the vehicle occupant back in the direction
of the backrest.
The Emergency Tensioning Device does not
correct an incorrect seat position or the rout-
ing of an incorrectly fastened seat belt.
When triggered, seat belt force limiters help
to reduce the force exerted by the seat belt on
the vehicle occupant.
The seat belt force limiters for the front seats
are synchronized with the front air bags,
which absorb part of the deceleration force.
This can reduce the force exerted on the vehi-
cle occupants during an accident.
!
If the front-passenger seat is unoccupied,
do not insert the belt tongue into the buckle
of the front-passenger seat. This may oth-
erwise lead to the triggering of the Emer-
gency Tensioning Device in the event of an
accident, which will then need to be
replaced.
Important safety notes
The use of seat belts and child restraint sys-
tems is required by law in:
R
all 50 states
R
the U.S. territories
R
the District of Columbia
R
all Canadian provinces
Even where this is not required by law, all
vehicle occupants should correctly fasten
their seat belts before starting the journey.
G
WARNING
If the seat belt is incorrectly fastened, it can-
not protect as intended. Furthermore, an
incorrectly fastened seat belt can cause addi-
tional injury, for example, in an accident, dur-
ing braking or when abruptly changing direc-
44
Occupant safety
Safety
tion. This poses an increased risk of injury or
even fatal injury.
Make sure that all vehicle occupants are
seated properly with a correctly fastened seat
belt.
G
WARNING
The seat belt does not offer the intended level
of protection if you have not moved the back-
rest to an almost vertical position. When brak-
ing or in the event of an accident, you could
slide underneath the seat belt and sustain
abdomen or neck injuries, for example. This
poses an increased risk of injury or even fatal
injury.
Adjust the seat properly before beginning
your journey. Always ensure that the backrest
is in an almost vertical position and that the
shoulder section of your seat belt is routed
across the center of your shoulder.
G
WARNING
Persons under 5 ft (1.50 m) in height cannot
fasten the seat belt correctly without an addi-
tional suitable restraint system. If the seat
belt is incorrectly fastened, it cannot protect
as intended. Furthermore, an incorrectly fas-
tened seat belt can cause additional injury, for
example, in an accident, during braking or an
abrupt change of direction. This poses an
increased risk of injury or even fatal injury.
For this reason, always secure persons under
5 ft (1.50 m) in height in suitable restraint
systems.
If a child younger than 12 years and under 5 ft
(1.50 m) in height is traveling in the vehicle:
R
always secure the child in a child restraint
system suitable for this Mercedes-Benz
vehicle. The child restraint system must be
appropriate to the age, weight and size of
the child
R
always observe the instructions and safety
notes in the "Children in the vehicle" sec-
tion of this Operator's Manual
(Y page 62) in addition to the child
restraint system manufacturer's installa-
tion instructions
R
be sure to observe the instructions and
safety notes on the "Occupant classifica-
tion system (OCS)" (Y page 52)
G
WARNING
The seat belts may not perform their intended
protective function if:
R
they are damaged, modified, extremely
dirty, bleach or dyed
R
the seat belt buckle is damaged or
extremely dirty
R
the Emergency Tensioning Devices, belt
anchorages or inertia reels have been modi-
fied
Seat belts may sustain non-visible damage in
an accident, e.g. due to glass splinters. Modi-
fied or damaged seat belts may tear or fail,
e.g. in an accident. Modified Emergency Ten-
sioning Devices could accidentally trigger or
fail to deploy when necessary. This poses an
increased risk of injury or even fatal injury.
Never modify the seat belts, Emergency Ten-
sioning Devices, belt anchorages or inertia
reels. Make sure that the seat belts are
undamaged, not worn out and clean. Follow-
ing an accident, have the seat belts checked
immediately at a qualified specialist work-
shop.
Only use seat belts that have been approved
for your vehicle by Mercedes-Benz. Any such
modifications could invalidate the vehicle's
general operating permit.
Proper use of the seat belts
Observe the safety notes on the seat belt
(Y page 44).
All vehicle occupants must be wearing the
seat belt correctly before beginning the jour-
ney. Also make sure that all vehicle occu-
pants are always wearing the seat belt cor-
rectly while the vehicle is in motion.
Occupant safety
45
Safety
Z
When fastening the seat belt, always make
sure that:
R
the seat belt tongue is only inserted to the
belt buckle belonging to that seat.
R
the seat belt is tight across your body.
Avoid wearing bulky clothing, e.g. a winter
coat.
R
the seat belt is not twisted.
Only then can the forces which occur be
distributed over the area of the belt.
R
the shoulder section of the belt is always
routed across the center of your shoulder.
The shoulder section of the belt must not
come into contact with your neck or be
routed under your arm. Where possible,
adjust the seat belt to the appropriate
height.
R
the lap belt passes tightly and as low down
as possible across your lap.
The lap belt must always be routed across
your hip joints and not across your abdo-
men. This applies particularly to pregnant
women. If necessary, push the lap belt
down to your hip joint and pull it tight using
the shoulder section of the belt.
R
the seat belt is not routed across sharp,
pointed or fragile objects.
If you have such items located on or in your
clothing, e.g. pens, keys or eyeglasses,
store these in a suitable place.
R
only one person is using a seat belt at a
time.
Infants and children must never travel sit-
ting on the lap of a vehicle occupant. In the
event of an accident, they could be crushed
between the vehicle occupant and seat
belt.
R
objects are never secured with a seat belt if
the seat belt is also being used by one of the
vehicle's occupants.
Seat belts are only intended to secure and
restrain vehicle occupants. Always observe
the "Loading guidelines" for securing objects,
luggage or loads (Y page 292).
Fastening and adjusting the seat belts
Observe the safety notes on the seat belt
(Y page 44) and the notes on correct use of
seat belts (Y page 45).
If the center rear seat belt is being used, also
observe the information about the seat belt
for the center rear seat (Y page 47).
X
Adjust the seat (Y page 110).
The seat backrest must be in an almost
vertical position.
X
Pull the seat belt smoothly from belt outlet
= and engage belt tongue ; into belt
buckle :.
The seat belt on the driver’s seat and the
front-passenger seat may be tightened
automatically, see "Belt adjustment"
(Y page 47).
X
If necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body.
46
Occupant safety
Safety
Wagon: you can also adjust the belt height on
the outer rear bench seats.
The shoulder section of the seat belt must
always be routed across the center of the
shoulder. Adjust the belt outlet if necessary.
X
To raise: slide the belt outlet upwards.
The belt outlet will engage in various posi-
tions.
X
To lower: hold belt outlet release : and
slide the belt outlet downwards.
X
Let go of belt outlet release : in the
desired position and make sure that the
belt outlet engages.
All seat belts in the vehicle with the exception
of the driver's seat belt and the seat belt on
the folding bench seat in the cargo compart-
ment are equipped with a special seat belt
retractor, to which a child restraint system
can be secured. Further information can be
found under "Special seat belt retractor"
(Y page 63).
Seat belt for the center rear seat
If the left-hand rear seat backrest is folded
down and back up again, the rear center seat
belt may lock. The seat belt can then not be
pulled out.
X
To release the rear center seat belt: pull
the seat belt out approximately 1 in
(25 mm) at the belt outlet on the backrest
and then release it again.
The seat belt is retracted and released.
Releasing seat belts
!
Make sure that the seat belt is fully rolled
up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt. Dam-
aged seat belts can no longer fulfill their
protective function and must be replaced.
Visit a qualified specialist workshop.
X
Press release button :, hold belt
tongue ; firmly and guide it back towards
belt outlet =.
Seat belt adjustment
The seat-belt adjustment is an integral part of
the PRE-SAFE
®
convenience function. This
function adjusts the driver's and front-
passenger seat belt to the upper body of the
occupants.
The belt strap is tightened slightly when:
R
the belt tongue is engaged in the buckle
and
R
the ignition is switched on
The seat-belt adjustment will apply a certain
retraction force if any slack is detected
between the vehicle occupant and the seat
belt. Do not hold on to the seat belt tightly
while it is adjusting.
Occupant safety
47
Safety
Z
You can switch the seat-belt adjustment on
and off in the on-board computer
(Y page 246).
Belt warning for the driver and front
passenger
The 7 seat belt warning lamp in the instru-
ment cluster is a reminder that all occupants
must fasten their seat belts. It may light up
continuously or flash. In addition, there may
be a warning tone.
Regardless of whether the driver's seat belt
has already been fastened, the 7 seat belt
warning lamp lights up for six seconds each
time the engine is started. If, after
six seconds, the driver or front-passenger
seat belt has not been fastened and the doors
are closed, the 7 seat belt warning lamp
lights up again. As soon as the driver's and
front-passenger seat belts are fastened or a
front door is opened again, the 7 seat belt
warning lamp goes out.
If the driver's seat belt is not fastened after
the engine is started, an additional warning
tone will sound. This warning tone stops after
six seconds or when the driver's seat belt is
fastened.
If the vehicle's speed exceeds 15 mph
(25 km/h) once and the driver's and front-
passenger seat belts are not fastened, a
warning tone sounds. The warning tone
sounds with increasing intensity for
60 seconds or until the driver or front
passenger have fastened their seat belts.
If the driver or front passenger unfasten their
seat belts during the journey, the seat belt
warning is activated again.
i
For more information on the 7 seat
belt warning lamp, see "Warning and indi-
cator lamps in the instrument cluster, seat
belts" (Y page 280).
Air bags
Introduction
The installation point of an air bag can be rec-
ognized by the AIR BAG symbol.
An air bag complements the correctly fas-
tened seat belt. It is no substitute for the seat
belt. The air bag provides additional protec-
tion in applicable accident situations.
Not all air bags are deployed in an accident.
The different air bag systems function inde-
pendently from one another (Y page 57).
However, no system available today can com-
pletely eliminate injuries and fatalities.
It is also not possible to rule out a risk of injury
caused by an air bag due to the high speed at
which the air bag must be deployed.
Important safety notes
G
WARNING
If you do not sit in the correct seat position,
the air bag cannot protect as intended and
could even cause additional injury when
deployed. This poses an increased risk of
injury or even fatal injury.
To avoid hazardous situations, always make
sure that all of the vehicle's occupants:
R
have fastened their seat belts correctly,
including pregnant women
R
are sitting correctly and maintain the great-
est possible distance to the air bags
R
follow the following instructions
Always make sure that there are no objects
between the air bag and the vehicle's occu-
pants.
R
Adjust the seats properly before beginning
your journey. Always make sure that the
seat is in an almost upright position. The
center of the head restraint must support
the head at about eye level.
R
Move the driver's and front-passenger
seats as far back as possible. The driver's
seat position must allow the vehicle to be
driven safely.
48
Occupant safety
Safety
R
Only hold the steering wheel on the out-
side. This allows the air bag to be fully
deployed.
R
Always lean against the backrest while driv-
ing. Do not lean forwards or lean against
the door or side window. You may other-
wise be in the deployment area of the air
bags.
R
Always keep your feet in the footwell in
front of the seat. Do not put your feet on the
dashboard, for example. Your feet may oth-
erwise be in the deployment area of the air
bag.
R
For this reason, always secure persons less
than 5 ft (1.50 m) tall in suitable restraint
systems. Up to this height, the seat belt
cannot be worn correctly.
If a child is traveling in your vehicle, also
observe the following notes:
R
Always secure children under 12 years of
age and less than 5 ft (1.50 m) in height in
suitable child restraint systems.
R
Child restraint systems should be installed
on the rear seats.
R
Only secure a child in a rearward-facing
child restraint system on the front-
passenger seat when the front-passenger
front air bag is deactivated. If the
PASSENGER AIR BAG OFF indicator lamp is
permanently lit, the front-passenger front
air bag is deactivated (Y page 43).
R
Always observe the instructions and safety
notes on the "Occupant Classification Sys-
tem (OCS)" (Y page 52) and on "Children
in the vehicle" (Y page 62) in addition to
the child restraint system manufacturer's
installation instructions.
Objects in the vehicle interior may pre-
vent the air bag from functioning cor-
rectly. Before starting your journey and to
avoid risks resulting from the speed of the air
bag as it deploys, make sure that:
R
there are no people, animals or objects
between the vehicle occupants and an air
bag.
R
there are no objects between the seat, door
and B-pillar.
R
no hard objects, e.g. coat hangers, hang on
the grab handles or coat hooks.
R
no accessories, such as cup holders, are
attached to the vehicle within the deploy-
ment area of an air bag, e.g. to doors, side
windows, rear side trim or side walls.
R
no heavy, sharp-edged or fragile objects
are in the pockets of your clothing. Store
such objects in a suitable place.
G
WARNING
If you modify the air bag cover or affix objects
such as stickers to it, the air bag can no longer
function correctly. There is an increased risk
of injury.
Never modify an air bag cover or affix objects
to it.
G
WARNING
Sensors to control the air bags are located in
the doors. Modifications or work not per-
formed correctly to the doors or door panel-
ing, as well as damaged doors, can lead to the
function of the sensors being impaired. The air
bags might therefore not function properly
any more. Consequently, the air bags cannot
protect vehicle occupants as they are
designed to do. There is an increased risk of
injury.
Never modify the doors or parts of the doors.
Always have work on the doors or door pan-
eling carried out at a qualified specialist work-
shop.
Occupant safety
49
Safety
Z
Front air bags
Driver's air bag : deploys in front of the
steering wheel; front-passenger front air
bag ; deploys in front of and above the glove
box.
When deployed, the front air bags offer addi-
tional head and thorax protection for the
occupants in the front seats.
The PASSENGER AIR BAG OFF indicator lamp
informs you about the status of the front-
passenger front air bag (Y page 43).
Front-passenger front air bag ; will only
deploy if:
R
the system, based on the OCS weight sen-
sor readings, detects that the front-
passenger seat is occupied (Y page 52)
R
the PASSENGER AIR BAG OFF indicator
lamp is not lit (Y page 52)
R
the restraint system control unit predicts a
high accident severity
Driver's knee bag
Driver's knee bag : deploys under the steer-
ing column. The driver's knee bag is triggered
together with the front air bag.
The driver's knee bag offers additional thigh,
knee and lower leg protection for the occu-
pant in the driver's seat.
Side impact air bags
G
WARNING
Unsuitable seat covers could restrict or even
prevent the deployment of the air bags inte-
grated into the seats. Consequently, the air
bags cannot protect vehicle occupants as
they are designed to do. In addition, the func-
tion of the Occupant Classification System
(OCS) could be restricted. This poses an
increased risk of injury or even fatal injury.
You should only use seat covers that have
been approved for the respective seat by
Mercedes-Benz.
Example: Sedan
Front side impact air bags : and rear side
impact air bags ; deploy next to the outer
bolster of the seat backrest.
When deployed, the side impact air bag offers
additional thorax protection. However, it does
not protect the:
R
head
R
neck
R
arms
In the event of a side impact, the side impact
air bag is deployed on the side on which the
impact occurs.
50
Occupant safety
Safety
The side impact air bag on the front-
passenger side (front) deploys in the follow-
ing situations:
R
the OCS system detects that the front-
passenger seat is occupied or
R
the belt tongue is engaged in the belt
buckle of the front-passenger seat
If the belt tongue is engaged in the belt
buckle, the side impact air bag on the front-
passenger side deploys if an appropriate acci-
dent situation occurs. In this case, deploy-
ment is independent of whether the front-
passenger seat is occupied or not.
Pelvis air bags
G
WARNING
Unsuitable seat covers could restrict or even
prevent the deployment of the air bags inte-
grated into the seats. Consequently, the air
bags cannot protect vehicle occupants as
they are designed to do. In addition, the func-
tion of the Occupant Classification System
(OCS) could be restricted. This poses an
increased risk of injury or even fatal injury.
You should only use seat covers that have
been approved for the respective seat by
Mercedes-Benz.
Pelvis air bags : deploy below next to the
outer seat cushions.
When activated, the pelvis air bag enhances
the level of protection of the vehicle occu-
pants on the side of the vehicle on which the
impact occurs.
The pelvis air bag is deployed on the side of
the impact.
The pelvis air bag on the front-passenger side
does not deploy under the following condi-
tions:
R
OCS has detected that the front-passenger
seat is unoccupied.
R
the front-passenger seat belt is not fas-
tened.
If the belt tongue is engaged in the belt
buckle, the pelvis air bag on the front-
passenger side deploys if an appropriate acci-
dent situation occurs. In this case, deploy-
ment is independent of whether the front-
passenger seat is occupied or not.
Window curtain air bags
Example: Sedan
Window curtain air bags : are integrated
into the side of the roof frame and deployed in
the area from the A-pillar to the C-pillar.
When deployed, the window curtain air bag
enhances the level of protection for the head.
However, it does not protect the chest or
arms.
In the event of a side impact, the window cur-
tain air bag is deployed on the side on which
the impact occurs.
If the system determines that they can offer
additional protection to that provided by the
seat belt, a window curtain air bag may be
deployed in other accident situations
(Y page 57).
Occupant safety
51
Safety
Z
Occupant Classification System
(OCS)
Introduction
The Occupant Classification System (OCS)
categorizes the person in the front-passenger
seat. Depending on that result, the front-
passenger front air bag is either enabled or
deactivated.
The system does not deactivate:
R
the side impact air bag
R
the pelvis air bag
R
the window curtain air bag
R
the Emergency Tensioning Devices
Prerequisites
To be classified correctly, the front passenger
must sit:
R
with the seat belt fastened correctly
R
in an almost upright position with their
back against the seat backrest
R
with their feet resting on the floor, if possi-
ble
If the front passenger does not observe these
conditions, OCS may produce a false classi-
fication, e.g. because the front passenger:
R
transfers their weight by supporting them-
selves on a vehicle armrest
R
sits in such a way that their weight is raised
from the seat cushion
If it is absolutely necessary to install a child
restraint system on the front-passenger seat,
be sure to observe the correct positioning of
the child restraint system. Never place
objects under or behind the child restraint
system, e.g. cushions. The entire base of the
child restraint system must always rest on the
seat cushion of the front-passenger seat. The
backrest of the forwards-facing child restraint
system must, as far as possible, be resting on
the backrest of the front-passenger seat.
The child restraint system must not touch the
roof or be put under strain by the head
restraint. Adjust the angle of the seat back-
rest and the head restraint position accord-
ingly.
Only then can OCS be guaranteed to function
correctly. Always observe the child restraint
system manufacturer's installation instruc-
tions.
Occupant Classification System opera-
tion (OCS)
The PASSENGER AIR BAG OFF indicator lamp
shows you whether the front-passenger front
air bag is disabled.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock, or press the Start/Stop but-
ton once or twice on vehicles with KEY-
LESS-GO.
The system carries out self-diagnostics.
The PASSENGER AIR BAG OFF indicator lamp
must light up for approximately six seconds.
The PASSENGER AIR BAG OFF indicator lamp
then displays the status of the front-
passenger front air bag. If the status of the
front-passenger front air bag changes while
the vehicle is in motion, an air bag display
message may appear in the instrument clus-
ter (Y page 260). When the front-passenger
seat is occupied, always pay attention to the
PASSENGER AIR BAG OFF indicator lamp. Be
aware of the status of the front-passenger
front air bag both before and during the jour-
ney.
52
Occupant safety
Safety
If the PASSENGER AIR BAG OFF indicator
lamp:
R
is lit: the front-passenger front air bag is
deactivated. It will then not be deployed in
the event of an accident.
R
does not light up: the front-passenger
front air bag is enabled. If, in the event of an
accident, all deployment criteria are met,
the front-passenger front air bag is
deployed.
G
WARNING
If the PASSENGER AIR BAG OFF indicator
lamp is lit, the front-passenger front air bag is
disabled. It will not be deployed in the event of
an accident and cannot perform its intended
protective function. A person in the front-
passenger seat could then, for example, come
into contact with the vehicle's interior, espe-
cially if the person is sitting too close to the
dashboard. This poses an increased risk of
injury or even fatal injury.
When the front-passenger seat is occupied,
always ensure that:
R
the classification of the person in the front-
passenger seat is correct and the front-
passenger front air bag is enabled or disa-
bled in accordance with the person in the
front-passenger seat
R
the front-passenger seat has been moved
back as far back as possible.
R
the person is seated correctly.
Make sure, both before and during the jour-
ney, that the status of the front-passenger
front air bag is correct.
G
WARNING
If you secure a child in a child restraint system
on the front-passenger seat and the
PASSENGER AIR BAG OFF indicator lamp is
off, the front-passenger front air bag can
deploy in the event of an accident. The child
could be struck by the air bag. This poses an
increased risk of injury or even fatal injury.
Make sure that the front-passenger front air
bag has been disabled. The PASSENGER AIR
BAG OFF indicator lamp must be lit.
G
WARNING
If you secure a child in a forward-facing child
restraint system on the front-passenger seat
and you position the front-passenger seat too
close to the dashboard, the child could, in the
event of an accident:
R
come into contact with the vehicle's inte-
rior if the PASSENGER AIR BAG OFF indi-
cator lamp is lit, for example
R
be struck by the air bag if the PASSENGER
AIR BAG OFF indicator lamp is off
This poses an increased risk of injury or even
fatal injury.
Move the front-passenger seat as far back as
possible. Always make sure that the shoulder
belt strap is correctly routed from the vehicle
belt sash guide to the shoulder belt guide on
the child restraint system. The shoulder belt
strap must be routed forwards and down-
wards from the vehicle belt sash guide. If nec-
essary, adjust the vehicle belt sash guide and
the front-passenger seat accordingly. Always
observe the child restraint system manufac-
turer's installation instructions.
If OCS determines that:
R
the front-passenger seat is unoccupied, the
PASSENGER AIR BAG OFF indicator lamp
lights up after the system self-test and
remains lit. This indicates that the front-
passenger front air bag is deactivated.
R
the front-passenger seat is occupied by a
child of up to 12 months old in a standard
child restraint system, the PASSENGER AIR
BAG OFF indicator lamp lights up after the
system self-test and remains lit. This indi-
cates that the front-passenger front air bag
is deactivated.
But in the case of a 12-month-old child in a
standard child restraint system, the
PASSENGER AIR BAG OFF indicator lamp
can go out after the system self-test. This
Occupant safety
53
Safety
Z
indicates that the front-passenger front air
bag is activated. The result of the classifi-
cation is dependent on, among other fac-
tors, the child restraint system and the
child's stature. It is recommended that you
install the child restraint system on a suit-
able rear seat.
R
the front-passenger seat is occupied by a
person of smaller stature (e.g. a teenager
or small adult), the PASSENGER AIR BAG
OFF indicator lamp lights up and remains lit
after the system self-test depending on the
result of the classification or, alternatively,
goes out.
-
If the PASSENGER AIR BAG OFF indicator
lamp is off, move the front-passenger
seat as far back as possible. Alterna-
tively, a person of small stature can sit on
a rear seat.
-
If the PASSENGER AIR BAG OFF indicator
lamp is lit, a person of smaller stature
should not use the front-passenger seat.
R
the front-passenger seat is occupied by an
adult or a person of a stature correspond-
ing to that of an adult, the PASSENGER AIR
BAG OFF indicator lamp goes out after the
system self-test. This indicates that the
front-passenger front air bag is activated.
If children are traveling in the vehicle, be sure
to observe the notes on "Children in the vehi-
cle" (Y page 62).
When OCS is malfunctioning, the red 6
restraint system warning lamp in the instru-
ment cluster and the PASSENGER AIR BAG
OFF indicator lamp light up simultaneously.
The front-passenger front air bag is deactiva-
ted in this case and does not deploy during an
accident. Have the system checked by quali-
fied technicians as soon as possible. Consult
an authorized Mercedes-Benz Center. The
front-passenger seat should only be repaired
at an authorized Mercedes-Benz Center.
If the front-passenger seat, the seat cover or
the seat cushion is damaged, have the nec-
essary repair work carried out at an author-
ized Mercedes-Benz Center.
For safety reasons, Mercedes-Benz recom-
mends that you only use seat accessories
that have been approved by Mercedes-Benz.
If the driver's air bag deploys, this does not
mean that the front-passenger front air bag
will also deploy. The Occupant Classification
System (OCS) categorizes the occupant in the
front-passenger seat. Depending on that
result, the front-passenger front air bag is
either enabled or deactivated.
System self-test
G
DANGER
If the PASSENGER AIR BAG OFF indicator
lamp does not light up during the system self-
test, then the system is malfunctioning. The
front-passenger front air bag might be trig-
gered unintentionally or might not be trig-
gered at all in the event of an accident with
high deceleration. This poses an increased
risk of injury or even fatal injury.
In this case the front-passenger seat may not
be used. Do not install a child restraint system
on the front-passenger seat. Have the Occu-
pant Classification System (OCS) checked
and repaired immediately at a qualified spe-
cialist workshop.
G
DANGER
If the PASSENGER AIR BAG OFF indicator
lamp remains lit after the system self-test, the
front-passenger front air bag is disabled. It will
not be deployed in the event of an accident. In
this case, the front-passenger front air bag
cannot perform its intended protective func-
tion, e.g. when a person is seated in the front-
passenger seat.
That person could, for example, come into
contact with the vehicle's interior, especially
if the person is sitting too close to the dash-
board. This poses an increased risk of injury or
even fatal injury.
54
Occupant safety
Safety
When the front-passenger seat is occupied,
always ensure that:
R
the classification of the person in the front-
passenger seat is correct and the front-
passenger front air bag is enabled or disa-
bled in accordance with the person in the
front-passenger seat
R
the person is seated properly with a cor-
rectly fastened seatbelt
R
the front-passenger seat has been moved
back as far back as possible
If the PASSENGER AIR BAG OFF indicator
lamp remains lit when it should not, the front-
passenger seat may not be used. Do not
install a child restraint system on the front-
passenger seat. Have the Occupant Classifi-
cation System (OCS) checked and repaired
immediately at a qualified specialist work-
shop.
G
WARNING
Objects between the seat surface and the
child restraint system could affect OCS oper-
ation. This could result in the front-passenger
air bag not functioning as intended during an
accident. This poses an increased risk of
injury or even fatal injury.
Do not place any objects between the seat
surface and the child restraint system. The
entire base of the child restraint system must
always rest on the seat cushion of the front-
passenger seat. The backrest of the forwards-
facing child restraint system must, as far as
possible, be resting on the backrest of the
front-passenger seat. Always comply with the
child restraint system manufacturer's instal-
lation instructions.
After the system self-test, the PASSENGER
AIR BAG OFF indicator lamp displays the sta-
tus of the front-passenger front air bag
(Y page 52).
For more information about the OCS, see
"Problems with the Occupant Classification
System" (Y page 56).
Occupant safety
55
Safety
Z
Problems with the Occupant Classification System (OCS)
Be sure to observe the notes on "System self-test" (Y page 54).
Problem
Possible causes/consequences and MM Solutions
The PASSENGER AIR
BAG OFF indicator
lamp lights up and
remains lit, even
though the front-
passenger seat is occu-
pied by an adult or a
person of a stature cor-
responding to that of an
adult.
The classification of the person on the front-passenger seat is
incorrect.
X
Make sure the conditions for a correct classification of the per-
son on the front-passenger seat are met (Y page 52).
X
If the PASSENGER AIR BAG OFF indicator lamp remains lit, the
front-passenger seat may not be used.
X
Have OCS checked as soon as possible at an authorized
Mercedes-Benz Center.
The PASSENGER AIR
BAG OFF indicator
lamp does not light up
and/or does not stay
on.
The front-passenger
seat is:
R
unoccupied
R
occupied by the
weight of a child up
to 12 months old in a
child restraint sys-
tem
OCS is malfunctioning.
X
Make sure there is nothing between the seat cushion and the
child seat.
X
Make sure that the entire base of the child restraint system rests
on the seat cushion of the front-passenger seat. The backrest of
the forward-facing child restraint system must lie as flat as pos-
sible against the backrest of the front-passenger seat. If nec-
essary, adjust the position of the front-passenger seat.
X
When installing the child restraint system, make sure that the
seat belt is tight. Do not pull the seat belt tight using the front-
passenger seat adjustment. This could result in the seat belt and
the child restraint system being pulled too tightly.
X
Check for correct installation of the child restraint system.
Make sure that the head restraint does not apply a load to the
child restraint system. If necessary, adjust the head restraint
accordingly.
X
Make sure that no objects are applying additional weight onto
the seat.
X
If the PASSENGER AIR BAG OFF indicator lamp remains off, do
not install a child restraint system on the front-passenger seat.
It is recommended that you install the restraint system on a
suitable rear seat.
X
Have OCS checked as soon as possible at an authorized
Mercedes-Benz Center.
56
Occupant safety
Safety
Deployment of Emergency Tensioning
Devices and air bags
Important safety notes
G
WARNING
The air bag parts are hot after an air bag has
been deployed. There is a risk of injury.
Do not touch the air bag parts. Have a
deployed air bag replaced at a qualified spe-
cialist workshop as soon as possible.
G
WARNING
A deployed air bag no longer offers any pro-
tection and cannot provide the intended pro-
tection in an accident. There is an increased
risk of injury.
Have the vehicle towed to a qualified special-
ist workshop in order to have a deployed air
bag replaced.
It is important for your safety and that of your
passenger to have deployed air bags replaced
and to have any malfunctioning air bags
repaired. This will help to make sure the air
bags continue to perform their protective
function for the vehicle occupants in the
event of a crash.
G
WARNING
Pyrotechnic Emergency Tensioning Devices
that have been deployed are no longer opera-
tional and are unable to perform their inten-
ded protective function. This poses an
increased risk of injury or even fatal injury.
Therefore, have pyrotechnic Emergency Ten-
sioning Devices which have been triggered
immediately replaced at a qualified specialist
workshop.
An electric motor is used by PRE-SAFE
®
to
trigger the tightening of the seat belt in haz-
ardous situations. This procedure is reversi-
ble.
If Emergency Tensioning Devices or air bags
are deployed, you will hear a bang, and a small
amount of powder may also be released. The
6 restraint system warning lamp lights up.
Only in rare cases will the bang affect your
hearing. The powder that is released gener-
ally does not constitute a health hazard, but it
may cause short-term breathing difficulties in
people with asthma or other respiratory prob-
lems. To avoid this, you may wish to get out of
the vehicle or open the windows as soon as it
is safe to do so.
Air bags and pyrotechnic Emergency Tension-
ing Devices (ETDs) contain perchlorate mate-
rial, which may require special handling and
regard for the environment. National guide-
lines must be observed during disposal. In
California, see www.dtsc.ca.gov/
HazardousWaste/Perchlorate/
index.cfm.
Method of operation
During the first stage of a collision, the
restraint system control unit evaluates impor-
tant physical data relating to vehicle deceler-
ation or acceleration, such as:
R
duration
R
direction
R
intensity
Based on the evaluation of this data, the
restraint system control unit deploys the
Emergency Tensioning Devices during a fron-
tal or rear collision.
An Emergency Tensioning Device can only be
deployed, if:
R
the ignition is switched on
R
the components of the restraint system are
operational; see "Restraint system warning
lamp" (Y page 43)
R
the belt tongue is engaged in the buckle on
the respective front-passenger seat
The Emergency Tensioning Devices in the
rear compartment are deployed independ-
ently of the lock status of the seat belts.
Occupant safety
57
Safety
Z
If the restraint system control unit detects a
more severe accident, further components of
the restraint system are activated independ-
ently of each other in certain frontal collision
situations:
R
Front air bags and driver's knee bag
R
Window curtain air bag, if the system deter-
mines that deployment can offer additional
protection to that provided by the seat belt
The front-passenger front air bag is activated
or deactivated depending on the person on
the front-passenger seat. The front-
passenger front air bag can only deploy in an
accident if the PASSENGER AIR BAG OFF indi-
cator lamp is off. Observe the information on
the PASSENGER AIR BAG OFF indicator lamp
(Y page 43).
Your vehicle has two-stage front air bags.
During the first deployment stage, the front
air bag is filled with propellant gas to reduce
the risk of injuries. The front air bag is fully
deployed with the maximum amount of pro-
pellant gas if a second deployment threshold
is reached within a few milliseconds.
The deployment threshold of the Emergency
Tensioning Devices and the air bag are deter-
mined by evaluating the rate of vehicle decel-
eration or acceleration which occurs at vari-
ous points in the vehicle. This process is pre-
emptive in nature. Deployment should take
place in good time at the start of the collision.
The rate of vehicle deceleration or accelera-
tion and the direction of the force are essen-
tially determined by:
R
the distribution of forces during the colli-
sion
R
the collision angle
R
the deformation characteristics of the vehi-
cle
R
the characteristics of the object with which
the vehicle has collided
Factors which can only be seen and measured
after a collision has occurred do not play a
decisive role in the deployment of an air bag,
nor do they provide an indication of air bag
deployment.
The vehicle can be deformed considerably,
without an air bag being deployed. This is the
case if only parts which are relatively easily
deformed are affected and the rate of decel-
eration is not high. Conversely, air bags may
be deployed even though the vehicle suffers
only minor deformation. This is the case if, for
example, very rigid vehicle parts such as lon-
gitudinal body members are hit, and sufficient
deceleration occurs as a result.
If the restraint system control unit detects a
side impact or that the vehicle is rolling over,
the relevant restraint system components are
activated independently of one another
depending on the apparent type of accident.
If the system determines a need for additional
protection for the vehicle occupants, the
Emergency Tensioning Devices are deployed.
R
Side impact air bags and pelvis air bag on
the side of impact, independently of the
Emergency Tensioning Device and the use
of the seat belt on the driver's seat and
outer seats in the second row
-
the OCS system detects that the front-
passenger seat is occupied or
-
the belt tongue is engaged in the belt
buckle of the front-passenger seat
R
Window curtain air bag on the side of
impact, independently of the use of the
seat belt and independently of whether the
front-passenger seat is occupied
R
Window curtain air bags on the driver's and
front-passenger side in certain situations
when the vehicle rolls over, if the system
determines that deployment can offer addi-
tional protection to that provided by the
seat belt
i
Not all air bags are deployed in an acci-
dent. The different air bag systems work
independently of each other.
58
Occupant safety
Safety
How the air bag system works is deter-
mined by the severity of the accident detec-
ted, especially the vehicle deceleration or
acceleration and the apparent type of acci-
dent:
R
frontal collision
R
side impact
R
rollover
NECK-PRO head restraints/NECK-
PRO luxury head restraints
Important safety notes
G
WARNING
The function of the head restraint may be
impaired if you:
R
attach objects such as coat hangers to the
head restraints, for example
R
use head restraint covers
If you do so, the head restraints cannot fulfill
their intended protective function in the event
of an accident. In addition, objects attached
to the head restraints could endanger other
vehicle occupants. There is an increased risk
of injury.
Do not attach any objects to the head
restraints and do not use head restraint cov-
ers.
Method of operation
NECK-PRO head restraints/NECK-PRO luxury
head restraints offer additional protection
against head and neck injuries. In the event of
a rear collision of a certain severity, the NECK-
PRO head restraints/NECK-PRO luxury head
restraints on the driver's and front-passenger
seats are moved forwards and upwards. This
provides better head support.
If the NECK-PRO head restraints/NECK-PRO
luxury head restraints have been triggered in
an accident, reset the NECK-PRO head
restraints/NECK-PRO luxury head restraints
on the driver's seat and the front-passenger
seat (Y page 59). Otherwise, the additional
protection will not be available in the event of
another rear-end collision. You can see that a
NECK-PRO head restraint/NECK-PRO luxury
head restraint has been triggered if it is tilted
forward and can no longer be adjusted.
Mercedes-Benz recommends that you have
the functionality of the NECK-PRO head
restraints/NECK-PRO luxury head restraints
checked at a qualified specialist workshop
after a rear-end collision.
Resetting a triggered NECK-PRO head
restraint/NECK-PRO luxury head
restraint
NECK-PRO head restraints
Example: Sedan
Do not insert your finger between the cushion
of the head restraint and the cover. Pay par-
ticular attention while resetting the NECK-
PRO head restraints.
X
Tilt the top of the NECK-PRO head restraint
cushion forwards in the direction of
arrow :.
X
Push the NECK-PRO head restraint cushion
down as far as it will go in the direction of
arrow ;.
X
With your hand flat, firmly push the NECK-
PRO head restraint cushion backwards in
the direction of arrow = until it engages.
X
Repeat this procedure for the second
NECK-PRO head restraint.
i
Resetting the NECK-PRO head restraints
requires a lot of strength. If you have diffi-
culty resetting the NECK-PRO head
Occupant safety
59
Safety
Z
restraints, have this work carried out at a
qualified specialist workshop.
NECK-PRO luxury head restraints
Example: Sedan
Do not insert your finger between the cushion
of the head restraint and the cover. Pay par-
ticular attention while resetting the NECK-
PRO luxury head restraints.
X
Remove resetting tool : from the vehicle
document wallet.
X
Slide resetting tool : into guide ;
between the NECK-PRO luxury head
restraint and the rear cover of the head
restraint.
X
Push resetting tool : downwards until you
hear the head restraint deployment mech-
anism engage.
X
Pull out resetting tool :.
X
With your hand flat, firmly push the NECK-
PRO luxury head restraint cushion back-
wards in the direction of arrow = until it
engages.
X
Repeat this procedure for the second
NECK-PRO luxury head restraint.
X
Put resetting tool : back into the vehicle
document wallet.
i
If you have difficulty resetting the NECK-
PRO luxury head restraints, have this work
carried out at a qualified specialist work-
shop.
PRE-SAFE
®
(anticipatory occupant
protection system)
Introduction
In certain hazardous situations, PRE-SAFE
®
takes pre-emptive measures to protect the
vehicle occupants.
Important safety notes
!
Make sure that there are no objects in the
footwell or behind the seats. There is a dan-
ger that the seats and/or objects could be
damaged when PRE-SAFE
®
is activated.
Although your vehicle is equipped with PRE-
SAFE
®
, the possibility of injury in the event of
an accident cannot be ruled out. Always
adapt your driving style to suit the prevailing
road and weather conditions and maintain a
safe distance from the vehicle in front. Drive
carefully.
Function
PRE-SAFE
®
intervenes:
R
in emergency braking situations, e.g. when
BAS is activated
R
in critical driving situations, e.g. when phys-
ical limits are exceeded and the vehicle
understeers or oversteers severely
R
on vehicles with the Driving Assistance
package: if BAS PLUS intervenes power-
fully or the radar sensor system detects an
imminent danger of collision in certain sit-
uations
PRE-SAFE
®
takes the following measures
depending on the hazardous situation detec-
ted:
R
the front seat belts are pre-tensioned.
R
the front-passenger seat is adjusted if it is
in an unfavorable position.
R
if the vehicle skids, the sliding sunroof and
the side windows are closed so that only a
small gap remains. The panorama roof with
60
Occupant safety
Safety
power tilt/sliding panel is completely
closed.
R
the air pressure in the side bolsters of the
seat backrests of the front active multicon-
tour seats is raised.
If the hazardous situation passes without
resulting in an accident, PRE-SAFE
®
slackens
the belt pre-tensioning. On vehicles with
active multicontour seats, the air pressure in
the side bolsters is reduced again. All settings
made by PRE-SAFE
®
can then be reversed.
If the seat belt pre-tensioning is not reduced:
X
Move the seat backrest or seat back
slightly when the vehicle is stationary.
The seat belt pre-tensioning is reduced and
the locking mechanism is released.
The seat-belt adjustment is an integral part of
the PRE-SAFE
®
convenience function. Infor-
mation about the convenience function can
be found under "Belt adjustment"
(Y page 47).
PRE-SAFE
®
PLUS (anticipatory occu-
pant protection system PLUS)
Introduction
PRE-SAFE
®
PLUS is only available in vehicles
with the Driving Assistance package.
Using the radar sensor system, PRE-SAFE
®
PLUS is able to detect that a head-on or rear-
end collision is imminent. In certain hazard-
ous situations, PRE-SAFE
®
PLUS takes pre-
emptive measures to protect the vehicle
occupants.
Important safety notes
The intervention of PRE-SAFE
®
PLUS cannot
prevent an imminent collision.
The driver is not warned about the interven-
tion of PRE-SAFE
®
PLUS.
PRE-SAFE
®
PLUS does not intervene if the
vehicle is backing up.
PRE-SAFE
®
PLUS does not perform braking
actions while the vehicle is in motion or when
Parking Guidance is active.
Function
PRE-SAFE
®
PLUS intervenes in certain situa-
tions if the radar sensor system detects an
imminent head-on or rear-end collision.
PRE-SAFE
®
PLUS takes the following meas-
ures depending on the hazardous situation
detected:
R
if the radar sensor system detects that a
head-on collision is imminent, the seat
belts are pre-tensioned.
R
if the radar sensor system detects that a
rear-end collision is imminent:
-
the brake pressure is increased if the
driver applies the brakes when the vehi-
cle is stationary.
-
the seat belts are pre-tensioned.
The PRE-SAFE
®
PLUS braking application is
canceled:
R
if the accelerator pedal is depressed when
a gear is engaged
R
if the risk of a collision passes or is no lon-
ger detected
R
if DISTRONIC PLUS indicates an intention
to pull away
If the hazardous situation passes without
resulting in an accident, the original settings
are restored.
Automatic measures after an acci-
dent
Immediately after an accident, the following
measures are implemented, depending on
the type and severity of the impact:
R
the hazard warning lamps are activated
R
the emergency lighting is activated
R
the vehicle doors are unlocked
R
the front side windows are lowered
Occupant safety
61
Safety
Z
R
vehicles with a memory function: the elec-
trically adjustable steering wheel is raised
R
the engine is switched off and the fuel sup-
ply is cut off
R
vehicles with mbrace: automatic emer-
gency call
R
vehicles with the hybrid drive system: the
hybrid system and the high-voltage electri-
cal system are deactivated
Children in the vehicle
Important safety notes
Accident statistics show that children
secured in the rear seats are safer than chil-
dren secured in the front-passenger seat. For
this reason, Mercedes-Benz strongly advises
that you install a child restraint system on a
rear seat. Children are generally better pro-
tected there.
If a child younger than 12 years and under 5 ft
(1.50 m) in height is traveling in the vehicle:
R
always secure the child in a child restraint
system suitable for Mercedes-Benz vehi-
cles. The child restraint system must be
appropriate to the age, weight and size of
the child
R
be sure to observe the instructions and
safety notes in this section in addition to
the child restraint system manufacturer's
installation instructions
R
be sure to observe the instructions and
safety notes on the "Occupant classifica-
tion system (OCS)" (Y page 52)
Do not install a rearward-facing child restraint
system on the center rear seat.
G
WARNING
If you leave children unsupervised in the vehi-
cle, they could set it in motion by, for example:
R
release the parking brake.
R
shift the automatic transmission out of the
parking position P.
R
start the engine.
In addition, they may operate vehicle equip-
ment and become trapped. There is a risk of
an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
If persons, particularly children are subjected
to prolonged exposure to extreme heat or
cold, there is a risk of injury, possibly even
fatal. Never leave children unattended in the
vehicle.
G
WARNING
If the child restraint system is subjected to
direct sunlight, parts may get very hot. Chil-
dren may burn themselves on these parts,
particularly on the metal parts of the child
restraint system. There is a risk of injury.
If you leave the vehicle, taking the child with
you, always ensure that the child restraint
system is not exposed to direct sunlight. Pro-
tect it with a blanket, for example. If the child
restraint system has been exposed to direct
sunlight, let it cool down before securing the
child in it. Never leave children unattended in
the vehicle.
Always ensure that all vehicle occupants have
their seat belts fastened correctly and are sit-
ting properly. Particular attention must be
paid to children.
Observe the safety notes on the seat belt
(Y page 44) and the notes on correct use of
seat belts (Y page 45).
A booster seat may be necessary to achieve
proper seat belt positioning for children over
41 lbs (18 kg) or until they reach a height
where a lap/shoulder belt can be fastened
properly without a booster seat.
62
Children in the vehicle
Safety
Special seat belt retractor
G
WARNING
If the seat belt is released while driving, the
child restraint system will no longer be
secured properly. The special seat belt retrac-
tor is disabled and the inertia real draws in a
portion of the seat belt. The seat belt cannot
be immediately refastened. There is an
increased risk of injury, possibly even fatal.
Stop the vehicle immediately, paying atten-
tion to road and traffic conditions. Reactivate
the special seat belt retractor and secure the
child restraint system properly.
All seat belts except the driver's seat belt and
the folding bench seat belts in the cargo com-
partment are equipped with a special seat
belt retractor. When activated, the special
seat belt retractor ensures that the seat belt
cannot slacken once the child seat is secured.
Installing a child restraint system:
X
Make sure you observe the child restraint
system manufacturer's installation instruc-
tions.
X
Pull the seat belt smoothly from the belt
outlet.
X
Engage seat belt tongue in belt buckle.
Activating the special seat belt retractor:
X
Pull the seat belt out fully and let the inertia
reel retract it again.
While the seat belt is retracting, you should
hear a ratcheting sound. The special seat
belt retractor is enabled.
X
Push the child restraint system down so
that the seat belt is tight and does not
loosen.
Removing a child restraint system/deactivat-
ing the special seat belt retractor:
X
Make sure you observe the child restraint
system manufacturer's installation instruc-
tions.
X
Press the belt buckle release button, hold
the belt tongue and guide it back towards
the belt outlet.
The special seat belt retractor is deactiva-
ted.
Child restraint system
The use of seat belts and child restraint sys-
tems is required by law in:
R
all 50 states
R
the U.S. territories
R
the District of Columbia
R
all Canadian provinces
Do not install a rearward-facing child restraint
system on the center rear seat.
You can obtain further information about the
correct child restraint system from any
authorized Mercedes-Benz Center.
G
WARNING
If the child restraint system is installed incor-
rectly on a suitable seat, it cannot protect as
intended. The child cannot then be restrained
in the event of an accident, heavy braking or
sudden changes of direction. There is an
increased risk of injury, possibly even fatal.
Make sure that you observe the child restraint
system manufacturer's installation instruc-
tions and the notes on use. Please ensure,
that the base of the child restraint system is
always resting completely on the seat cush-
ion. Never place objects, e.g. cushions, under
or behind the child restraint system. Only use
child restraint systems with the original cover
designed for them. Only replace damaged
covers with genuine covers.
Children in the vehicle
63
Safety
Z
G
WARNING
If the child restraint system is installed incor-
rectly or is not secured, it can come loose in
the event of an accident, heavy braking or a
sudden change in direction. The child
restraint system could be thrown about, strik-
ing vehicle occupants. There is an increased
risk of injury, possibly even fatal.
Always install child restraint systems prop-
erly, even if they are not being used. Make
sure that you observe the child restraint sys-
tem manufacturer's installation instructions.
You will find further information on stowing
objects, luggage or loads under "Loading
guidelines" (Y page 292).
G
WARNING
Child restraint systems or their securing sys-
tems which have been damaged or subjected
to a load in an accident can no longer protect
as intended. The child cannot then be
restrained in the event of an accident, heavy
braking or sudden changes of direction. There
is an increased risk of injury, possibly even
fatal.
Replace child restraint systems which have
been damaged or subjected to a load in an
accident as soon as possible. Have the secur-
ing systems on the child restraint system
checked at a qualified specialist workshop,
before you install a child restraint system
again.
Securing systems for the child restraint sys-
tem are:
R
the seat belt system
R
the ISOFIX (LATCH-type) securing rings
R
the Top Tether anchorages
If it is absolutely necessary to carry a child on
the front-passenger seat, be sure to observe
the information on the "Occupant Classifica-
tion System (OCS)" (Y page 52). There you
will also find information on deactivating the
front-passenger front air bag.
All child restraint systems must meet the fol-
lowing standards:
R
U.S. Federal Motor Vehicle Safety Stand-
ards 213 and 225
R
Canadian Motor Vehicle Safety Standards
213 and 210.2
Confirmation that the child restraint system
corresponds to the standards can be found
on an instruction label on the child restraint
system. This confirmation can also be found
in the installation instructions that are inclu-
ded with the child restraint system.
Observe the warning labels in the vehicle inte-
rior and on the child restraint system.
LATCH-type (ISOFIX) child seat secur-
ing system
G
WARNING
LATCH-type (ISOFIX) child restraint systems
do not offer sufficient protective effect for
children whose weight is greater than 48 lbs
(22 kg) who are secured using the safety belt
integrated in the child restraint system. In the
event of an accident, a child might not be
restrained correctly. This poses an increased
risk of injury or even fatal injury.
If the child weighs more than 48 lbs (22 kg),
only use LATCH-type (ISOFIX) child restraint
systems with which the child is also secured
with the vehicle seat belt. Also secure the
child restraint system with the Top Tether
belt, if available.
Always comply with the manufacturer's
installation and operating instructions for the
child restraint system used.
Before every trip, make sure that the LATCH-
type (ISOFIX) child restraint system is
engaged correctly in both LATCH-type (ISO-
FIX) securing rings
!
When installing the child restraint system,
make sure that the seat belt for the middle
seat does not get trapped. The seat belt
could otherwise be damaged.
64
Children in the vehicle
Safety
When installing the LATCH-type (ISOFIX) child
restraint system, fold protective caps ; of
LATCH-type (ISOFIX) securing rings :
inwards.
X
Install the LATCH-type (ISOFIX) child
restraint system on both LATCH-type (ISO-
FIX) securing rings :.
ISOFIX is a standardized securing system for
specially designed child restraint systems on
the rear seats. LATCH-type (ISOFIX) securing
rings : for two LATCH-type (ISOFIX) child
restraint systems are installed on the left and
right rear seats.
Non-LATCH-type (ISOFIX) child seats may
also be used and can be installed using the
vehicle's seat belt system. Install child seats
according to the manufacturer's instructions.
Top Tether
Introduction
Top Tether provides an additional connection
between the child restraint system secured
with a LATCH-type (ISOFIX) child seat mount
and the vehicle. This helps reduce the risk of
injury even further. If the child restraint sys-
tem is equipped with a Top Tether belt, this
should always be used.
Important safety notes
G
WARNING
If the rear seat backrests are not locked, they
could fold forwards in the event of an acci-
dent, heavy braking or sudden changes of
direction. As a result, child restraint systems
cannot perform their intended protective
function. Rear seat backrests that are not
locked can also cause additional injuries, e.g.
in the event of an accident. This poses an
increased risk of injury or even fatal injury.
Always lock rear seat backrests after instal-
ling a Top Tether belt. Observe the lock veri-
fication indicator. Adjust the rear seat backr-
ests so that they are in an upright position.
If the rear seat backrest is not engaged and
locked, this will be shown in the multifunction
display in the instrument cluster. A warning
tone also sounds.
Top Tether anchorages
Sedan
The Top Tether anchorage points are installed
in the rear compartment behind the head
restraints.
X
Move head restraint : upwards.
X
Fold up cover ; of Top Tether anchorage
A.
Children in the vehicle
65
Safety
Z
X
Install the LATCH-type (ISOFIX) child
restraint system with Top Tether. Always
comply with the child restraint system
manufacturer's installation instructions
when doing so.
X
Route Top Tether belt = under head
restraint : between the two head restraint
bars.
X
Hook Top Tether hook ? into Top Tether
anchorage A.
X
Make sure that Top Tether belt = is not
twisted.
X
Tension Top Tether belt =. Always comply
with the child restraint system manufactur-
er's installation instructions when doing so.
X
Fold down cover ; of Top Tether anchor-
age A.
X
Move head restraint : back down again
slightly if necessary (Y page 113). Make
sure that you do not interfere with the cor-
rect routing of Top Tether belt =.
Wagon
The Top Tether anchorages are located on the
rear side of the rear seat backrests.
X
Move head restraint : upwards.
X
Remove combined cargo cover and net =
(Y page 300).
X
Install the LATCH-type (ISOFIX) child
restraint system with Top Tether. Always
comply with the child restraint system
manufacturer's installation instructions
when doing so.
X
Route Top Tether belt B under head
restraint : between the two head restraint
bars.
X
Hook Top Tether hook A into Top Tether
anchorage ? on the back of rear seat
backrest ;.
X
Make sure that Top Tether belt B is not
twisted.
X
Tension Top Tether belt B. Always comply
with the child restraint system manufactur-
er's installation instructions when doing so.
X
Move head restraint : back down again
slightly if necessary (Y page 113). Make
sure that you do not interfere with the cor-
rect routing of Top Tether belt B.
X
Install combined cargo cover and net =
(Y page 300).
Child restraint system on the front-
passenger seat
General notes
Accident statistics show that children
secured in the rear seats are safer than chil-
dren secured in the front-passenger seat. For
this reason, Mercedes-Benz strongly advises
that you install the child restraint system on a
rear seat.
If it is absolutely necessary to install a child
restraint system on the front-passenger seat,
be sure to observe the instructions and safety
notes on the "Occupant Classification System
(OCS)" (Y page 52).
66
Children in the vehicle
Safety
You can thus avoid the risks that could arise
as a result of:
R
an incorrectly categorized person in the
front-passenger seat
R
the unintentional deactivation of the front-
passenger front air bag
R
the unsuitable positioning of the child
restraint system, e.g. too close to the dash-
board
Rearward-facing child restraint system
If it is absolutely necessary to install a rear-
ward-facing child restraint system on the
front-passenger seat, always make sure that
the front-passenger front air bag is deactiva-
ted. Only if the PASSENGER AIR BAG OFF
indicator lamp is permanently lit (Y page 43)
is the front-passenger front air bag deactiva-
ted.
Always observe the child restraint system
manufacturer's installation and operating
instructions.
Forward-facing child restraint system
If it is absolutely necessary to install a
forward-facing child restraint system on the
front-passenger seat, always move the front-
passenger seat as far back as possible. The
entire base of the child restraint system must
always rest on the seat cushion of the front-
passenger seat. The backrest of the child
restraint system must lie as flat as possible
against the backrest of the front-passenger
seat. The child restraint system must not
touch the roof or be subjected to a load by the
head restraint. Adjust the angle of the seat
backrest and the head restraint position
accordingly. Always make sure that the shoul-
der belt strap is correctly routed from the
vehicle belt outlet to the shoulder belt guide
on the child restraint system. The shoulder
belt strap must be routed forwards and down-
wards from the vehicle belt outlet. If neces-
sary, adjust the vehicle belt outlet and the
front-passenger seat accordingly.
Always observe the child restraint system
manufacturer's installation and operating
instructions.
Child-proof locks
Important safety notes
G
WARNING
If children are traveling in the vehicle, they
could:
R
open doors, thus endangering other people
or road users
R
exit the vehicle and be caught by oncoming
traffic
R
operate vehicle equipment and become
trapped
There is a risk of an accident and injury.
Always activate the child-proof locks and
override feature if children are traveling in the
vehicle. When leaving the vehicle, always take
the key with you and lock the vehicle. Never
leave children unattended in the vehicle.
Override feature for:
R
the rear doors (Y page 68)
R
the rear side windows (Y page 68)
G
WARNING
If you leave children unsupervised in the vehi-
cle, they could set it in motion by, for example:
R
release the parking brake.
R
shift the automatic transmission out of the
parking position P.
R
start the engine.
In addition, they may operate vehicle equip-
ment and become trapped. There is a risk of
an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
Children in the vehicle
67
Safety
Z
G
WARNING
If persons, particularly children are subjected
to prolonged exposure to extreme heat or
cold, there is a risk of injury, possibly even
fatal. Never leave children unattended in the
vehicle.
G
WARNING
If the child restraint system is subjected to
direct sunlight, parts may get very hot. Chil-
dren may burn themselves on these parts,
particularly on the metal parts of the child
restraint system. There is a risk of injury.
If you leave the vehicle, taking the child with
you, always ensure that the child restraint
system is not exposed to direct sunlight. Pro-
tect it with a blanket, for example. If the child
restraint system has been exposed to direct
sunlight, let it cool down before securing the
child in it. Never leave children unattended in
the vehicle.
Child-proof locks for the rear doors
Child-proof lock, rear door (example: Sedan)
You secure each door individually with the
child-proof locks on the rear doors. A door
secured with a child-proof lock cannot be
opened from inside the vehicle. When the
vehicle is unlocked, the door can be opened
from the outside.
X
To activate: press the child-proof lock
lever up in the direction of arrow :.
X
Make sure that the child-proof locks are
working properly.
X
To deactivate: press the child-proof lock
lever down in the direction of arrow ;.
Override feature for the rear side win-
dows
X
To activate/deactivate: press button ;.
If indicator lamp : is lit, operation of the
rear side windows is disabled. Operation is
only possible using the switches in the driv-
er's door. If indicator lamp : is off, oper-
ation is possible using the switches in the
rear compartment.
Pets in the vehicle
G
WARNING
If you leave animals unattended or unsecured
in the vehicle, they could press buttons or
switches, for example.
As a result, they could:
R
activate vehicle equipment and become
trapped, for example
R
activate or deactivate systems, thereby
endangering other road users
Unsecured animals could also be flung around
the vehicle in the event of an accident or sud-
den steering or braking, thereby injuring vehi-
cle occupants. There is a risk of an accident
and injury.
68
Pets in the vehicle
Safety
Never leave animals unattended in the vehi-
cle. Always secure animals properly during
the journey, e.g. use a suitable animal trans-
port box.
Driving safety systems
Overview of driving safety systems
In this section, you will find information about
the following driving safety systems:
R
ABS (Anti-lock Braking System)
(Y page 69)
R
BAS (Brake Assist System) (Y page 70)
R
BAS PLUS (Brake Assist System PLUS) with
Cross-Traffic Assist (Y page 70)
R
COLLISION PREVENTION ASSIST PLUS
(distance warning function and adaptive
Brake Assist) (Y page 72)
R
ESP
®
(Electronic Stability Program)
(Y page 74)
R
EBD (Electronic Brake force Distribution)
(Y page 78)
R
ADAPTIVE BRAKE (Y page 78)
R
PRE-SAFE
®
Brake (Y page 78)
R
STEER CONTROL (Y page 80)
Important safety notes
If you fail to adapt your driving style or
become distracted, the driving safety sys-
tems can neither reduce the risk of accident
nor override the laws of physics. Driving
safety systems are merely aids designed to
assist driving. You are responsible for the dis-
tance to the vehicle in front, for vehicle speed
and for braking in good time. Always adapt
your driving style to suit the prevailing road,
weather and traffic conditions and maintain a
safe distance from the vehicle in front. Drive
carefully.
i
In wintry driving conditions, always use
winter tires (M+S tires) and if necessary,
snow chains. Only in this way will the driv-
ing safety systems described in this section
work as effectively as possible.
ABS (Anti-lock Braking System)
General information
ABS regulates brake pressure in such a way
that the wheels do not lock when you brake.
This allows you to continue steering the vehi-
cle when braking.
The yellow ! ABS warning lamp in the
instrument cluster lights up when the ignition
is switched on. It goes out when the engine is
running.
Important safety notes
i
Observe the "Important safety notes" sec-
tion (Y page 69).
G
WARNING
If ABS is faulty, the wheels could lock when
braking. The steerability and braking charac-
teristics may be severely impaired. Addition-
ally, further driving safety systems are deac-
tivated. There is an increased danger of skid-
ding and accidents.
Drive on carefully. Have ABS checked imme-
diately at a qualified specialist workshop.
When ABS is malfunctioning, other systems,
including driving safety systems, will also
become inoperative. Observe the information
on the ABS warning lamp (Y page 282) and
display messages which may be shown in the
instrument cluster (Y page 252).
ABS works from a speed of about 5 mph
(8 km/h), regardless of road-surface condi-
tions. ABS works on slippery surfaces, even if
you only brake gently.
Driving safety systems
69
Safety
Z
Braking
X
If ABS intervenes: continue to depress the
brake pedal vigorously until the braking sit-
uation is over.
X
To make a full brake application:
depress the brake pedal with full force.
If ABS intervenes when braking, you will feel a
pulsing in the brake pedal.
The pulsating brake pedal can be an indica-
tion of hazardous road conditions, and func-
tions as a reminder to take extra care while
driving.
BAS (Brake Assist System)
General information
BAS operates in emergency braking situa-
tions. If you depress the brake pedal quickly,
BAS automatically boosts the braking force,
thus shortening the stopping distance.
Important safety notes
i
Observe the "Important safety notes" sec-
tion (Y page 69).
G
WARNING
If BAS is malfunctioning, the braking distance
in an emergency braking situation is
increased. There is a risk of an accident.
In an emergency braking situation, depress
the brake pedal with full force. ABS prevents
the wheels from locking.
Braking
X
Keep the brake pedal firmly depressed until
the emergency braking situation is over.
ABS prevents the wheels from locking.
The brakes will function as usual once you
release the brake pedal. BAS is deactivated.
BAS PLUS (Brake Assist PLUS) with
Cross-Traffic Assist
General information
i
Observe the "Important safety notes" sec-
tion (Y page 69).
BAS PLUS is only available on vehicles with
the Driving Assistance package.
For BAS PLUS to assist you when driving, the
radar sensor system and the camera system
must be operational.
With the help of a sensor system and a cam-
era system, BAS PLUS can detect obstacles:
R
that are in the path of your vehicle for an
extended period of time
R
that cross the path of your vehicle
In addition, pedestrians in the path of your
vehicle can be detected.
BAS PLUS detects pedestrians by using typi-
cal characteristics such as the body contours
and posture of a person standing upright.
If the radar sensor system or the camera sys-
tem is malfunctioning, BAS PLUS functions
are restricted or no longer available. The
brake system is still available with complete
brake boosting effect and BAS.
i
Observe the restrictions described in the
"Important safety notes" sec-
tion“ (Y page 70).
BAS PLUS can help you to minimize the risk of
a collision with a vehicle or a pedestrian and
reduce the effects of such a collision. If BAS
PLUS detects a danger of collision, you are
assisted when braking.
Important safety notes
G
WARNING
BAS PLUS cannot always clearly identify
objects and complex traffic situations.
In such cases, BAS PLUS may:
R
intervene unnecessarily
R
not intervene
There is a risk of an accident.
70
Driving safety systems
Safety
Always pay careful attention to the traffic sit-
uation and be ready to brake. Terminate the
intervention in a non-critical driving situation.
G
WARNING
BAS PLUS does not react:
R
to small people, e.g. children
R
to animals
R
to oncoming vehicles
R
when cornering
As a result, BAS PLUS may not intervene in all
critical situations. There is a risk of an acci-
dent.
Always pay careful attention to the traffic sit-
uation and be ready to brake.
In the event of snowfall or heavy rain, the rec-
ognition can be impaired.
Recognition by the radar sensor system is
also impaired in the event of:
R
there is dirt on the sensors or anything else
covering the sensors
R
there is interference by other radar sources
R
there are strong radar reflections, for
example in parking garages
R
a narrow vehicle traveling in front, e.g. a
motorbike
R
a vehicle traveling in front on a different line
R
vehicles quickly moving into the radar sen-
sor system detection range
Recognition by the camera system is also
impaired in the event of:
R
dirt on the camera or if the camera is cov-
ered
R
there is glare on the camera system, e.g.
from the sun being low in the sky
R
darkness
R
if:
-
pedestrians move quickly, e.g. into the
path of the vehicle
-
the camera system no longer recognizes
a pedestrian as a person due to special
clothing or other objects
-
a pedestrian is concealed by other
objects
-
the typical outline of a person is not dis-
tinguishable from the background
Following damage to the front end of the vehi-
cle, have the configuration and operation of
the radar sensors checked at a qualified spe-
cialist workshop. This also applies to colli-
sions at low speeds where there is no visible
damage to the front of the vehicle.
Following damage to the windshield, have the
configuration and operation of the camera
system checked at a qualified specialist work-
shop.
Function
To avoid a collision, BAS PLUS calculates the
brake force necessary if:
R
you approach an obstacle, and
R
BAS PLUS has detected a risk of collision
When driving at a speed under 20 mph
(30 km/h): if you depress the brake pedal,
BAS PLUS is activated. The increase in brake
pressure will be carried out at the last possi-
ble moment.
When driving at a speed above 20 mph
(30 km/h): if you depress the brake pedal
sharply, BAS PLUS automatically raises the
brake pressure to a value adapted to the traf-
fic situation.
BAS PLUS provides braking assistance in haz-
ardous situations with vehicles in front within
a speed range between 4 mph (7 km/h) and
155 mph (250 km/h).
Driving safety systems
71
Safety
Z
Up to a speed of approximately 44 mph
(70 km/h), BAS PLUS may react to:
R
stationary objects in the path of your vehi-
cle, e.g. stopped or parked vehicles
R
pedestrians in the path of your vehicle
R
objects crossing your path and that are
recognized in the detection range of the
sensors
i
If BAS PLUS demands particularly high
braking force, preventative passenger pro-
tection measures (PRE-SAFE
®
) are activa-
ted simultaneously.
X
Keep the brake pedal depressed until the
emergency braking situation is over.
ABS prevents the wheels from locking.
BAS PLUS is deactivated and the brakes func-
tion as usual, if:
R
you release the brake pedal.
R
there is no longer a risk of collision.
R
no obstacle is detected in front of your
vehicle.
R
you depress the accelerator pedal.
R
you activate kickdown.
COLLISION PREVENTION ASSIST
PLUS
General information
COLLISION PREVENTION ASSIST PLUS con-
sists of a distance warning function with an
autonomous emergency braking function and
adaptive Brake Assist.
COLLISION PREVENTION ASSIST PLUS can
help you to minimize the risk of a front-end
collision with a vehicle ahead or reduce the
effects of such a collision.
If COLLISION PREVENTION ASSIST PLUS
detects that there is a risk of a collision, you
will be warned visually and acoustically. If you
do not react to the visual and audible collision
warning, autonomous braking can be initiated
in critical situations. If you apply the brake
yourself in a critical situation, the COLLISION
PREVENTION ASSIST system PLUS adaptive
Brake Assist assists you.
Important safety notes
In particular, the detection of obstacles can
be impaired if:
R
there is dirt on the sensors or anything else
covering the sensors
R
there is snow or heavy rain
R
there is interference by other radar sources
R
there are strong radar reflections, for
example in parking garages
R
a narrow vehicle traveling in front, e.g. a
motorbike
R
a vehicle traveling in front on a different line
R
new vehicles or after a service on the COL-
LISION PREVENTION ASSIST PLUS system
Observe the notes in the section on break-
ing-in (Y page 156).
Following damage to the front end of the vehi-
cle, have the configuration and operation of
the radar sensor checked at a qualified spe-
cialist workshop. This also applies to colli-
sions at low speeds where there is no visible
damage to the front of the vehicle.
Distance warning function
Important safety notes
i
Observe the "Important safety notes" sec-
tion for driving safety systems (Y page 69).
G
WARNING
The distance warning function does not react:
R
to people or animals
R
to oncoming vehicles
R
to crossing traffic
R
when cornering
Thus, the distance warning function cannot
provide a warning in all critical situations.
There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and be ready to brake.
72
Driving safety systems
Safety
G
WARNING
The distance warning function cannot always
clearly identify objects and complex traffic
situations.
In such cases, the distance warning function
may:
R
give an unnecessary warning
R
not give a warning
There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and do not rely solely on the distance
warning function.
Function
X
To activate/deactivate: activate or deac-
tivate the distance warning function in the
on-board computer (Y page 242).
If the distance warning function is not activa-
ted, the æ symbol appears in the assis-
tance graphics display.
The distance warning function can help you to
minimize the risk of a front-end collision with
a vehicle ahead or reduce the effects of such
a collision. If the distance warning function
detects that there is a risk of a collision, you
will be warned visually and acoustically.
Starting at a speed of around 4 mph (7 km/h),
the distance warning function warns you if
you rapidly approach a vehicle in front. An
intermittent warning tone will then sound,
and the · distance warning lamp will light
up in the instrument cluster.
X
Brake immediately in order to increase the
distance from the vehicle in front.
or
X
Take evasive action, provided it is safe to do
so.
Due to the nature of the system, particularly
complicated but non-critical driving condi-
tions may also cause the system to display a
warning.
With the help of the radar sensor system, the
distance warning function can detect obsta-
cles that are in the path of your vehicle for an
extended period of time.
Up to a speed of around 44 mph (70 km/h),
the distance warning function can also react
to stationary obstacles, such as stopped or
parked vehicles.
If you approach an obstacle and the distance
warning function detects a risk of a collision,
the system will initially alert you both visually
and acoustically.
Autonomous braking function
If the driver does not react to the distance
warning signal in a critical situation, COLLI-
SION PREVENTION ASSIST PLUS can assist
with the autonomous braking function.
The autonomous braking function:
R
gives the driver more time to react to criti-
cal driving situations
R
can help the driver to avoid an accident or
R
reduces the effects of an accident
Vehicles without DISTRONIC PLUS: the
autonomous braking function is available in
the following speed ranges:
R
5 - 65 mph (7 - 105 km/h) for moving
objects
R
5 - 31 mph (7 - 50 km/h) for stationary
objects
Vehicles with DISTRONIC PLUS: the auton-
omous braking function is available in the fol-
lowing speed ranges:
R
5 - 124 mph (7 - 200 km/h) for moving
objects
R
5 - 31 mph (7 - 50 km/h) for stationary
objects
If the autonomous braking function requires a
particularly high braking force, preventative
passenger protection measures (PRE-SAFE
®
)
are activated simultaneously.
Adaptive Brake Assist
i
Observe the "Important safety notes" sec-
tion (Y page 69).
Driving safety systems
73
Safety
Z
Adaptive Brake Assist provides braking assis-
tance in hazardous situations at speeds
above 4 mph (7 km/h). It uses radar sensor
technology to assess the traffic situation.
G
WARNING
Adaptive Brake Assist cannot always clearly
identify objects and complex traffic situa-
tions.
In such cases, Adaptive Brake Assist may:
R
intervene unnecessarily
R
not intervene
There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and be ready to brake. Terminate the
intervention in a non-critical driving situation.
G
WARNING
Adaptive Brake Assist does not react:
R
to people or animals
R
to oncoming vehicles
R
to crossing traffic
R
when cornering
As a result, Adaptive Brake Assist may not
intervene in all critical conditions. There is a
risk of an accident.
Always pay careful attention to the traffic sit-
uation and be ready to brake.
Due to the nature of the system, particularly
complicated but non-critical driving condi-
tions may also cause Brake Assist to inter-
vene.
If Adaptive Brake Assist is not available due to
a malfunction in the radar sensor system, the
brake system remains available with full
brake boosting effect and BAS.
With the help of Adaptive Brake Assist, the
distance warning signal can detect obstacles
that are in the path of your vehicle for an
extended period of time.
If adaptive Brake Assist has detected that
there is a risk of a collision, it calculates the
braking force necessary to avoid a collision.
Should you apply the brakes vigorously,
Adaptive Brake Assist will automatically
increase the braking force to a level suitable
for the traffic conditions.
X
Keep the brake pedal depressed until the
emergency braking situation is over.
ABS prevents the wheels from locking.
The brakes will work normally again if:
R
you release the brake pedal.
R
there is no longer any danger of a collision.
R
no obstacle is detected in front of your
vehicle.
Adaptive Brake Assist is then deactivated.
If adaptive Brake Assist demands particularly
high braking force, preventative passenger
protection measures (PRE-SAFE
®
) are activa-
ted simultaneously.
Up to vehicle speeds of around 155 mph
(250 km/h), adaptive Brake Assist is capable
of reacting to moving objects that have
already been recognized as such at least once
over the period of observation.
Up to a speed of approximately 44 mph
(70 km/h), adaptive Brake Assist reacts to
stationary obstacles.
ESP
®
(Electronic Stability Program)
General notes
i
Observe the "Important safety notes" sec-
tion (Y page 69).
ESP
®
monitors driving stability and traction,
i.e. power transmission between the tires and
the road surface.
If ESP
®
detects that the vehicle is deviating
from the direction desired by the driver, one
or more wheels are braked to stabilize the
vehicle. The engine output is also modified to
keep the vehicle on the desired course within
physical limits. ESP
®
assists the driver when
pulling away on wet or slippery roads. ESP
®
can also stabilize the vehicle during braking.
74
Driving safety systems
Safety
ETS/4ETS (Electronic Traction System)
ETS traction control is part of ESP
®
. On vehi-
cles with 4MATIC, 4ETS is part of ESP
®
.
Traction control brakes the drive wheels indi-
vidually if they spin. This enables you to pull
away and accelerate on slippery surfaces, for
example if the road surface is slippery on one
side. In addition, more drive torque is trans-
ferred to the wheel or wheels with traction.
Traction control remains active, even if you
deactivate ESP
®
.
Important safety notes
i
Observe the "Important safety notes" sec-
tion (Y page 69).
G
WARNING
If ESP
®
is malfunctioning, ESP
®
is unable to
stabilize the vehicle. Additionally, further driv-
ing safety systems are deactivated. This
increases the risk of skidding and an accident.
Drive on carefully. Have ESP
®
checked at a
qualified specialist workshop.
!
Vehicles with 4MATIC: switch off the igni-
tion when the parking brake is being tested
on a brake dynamometer.
Application of the brakes by ESP
®
may oth-
erwise destroy the brake system.
!
Vehicles with 4MATIC: function or per-
formance tests may only be carried out on
a 2-axle dynamometer. Before you operate
the vehicle on such a dynamometer, please
consult a qualified workshop. You could
otherwise damage the drive train or the
brake system.
!
Vehicles with 4MATIC: function or per-
formance tests may only be carried out on
a 2-axle dynamometer. Before you operate
the vehicle on such a dynamometer, please
consult a qualified workshop. You could
otherwise damage the drive train or the
brake system.
Vehicles without 4MATIC: observe the notes
on ESP
®
(Y page 357) when towing the vehi-
cle with a raised rear axle.
ESP
®
is deactivated if the å warning lamp
in the instrument cluster lights up continu-
ously when the engine is running.
If the ÷ warning lamp and the å warn-
ing lamp are lit continuously, ESP
®
is not
available due to a malfunction.
Observe the information on warning lamps
(Y page 283) and display messages which
may be shown in the instrument cluster
(Y page 252).
i
Only use wheels with the recommended
tire sizes. Only then will ESP
®
function
properly.
Characteristics of ESP
®
General information
If the ÷ ESP warning lamp goes out before
beginning the journey, ESP
®
is automatically
active.
If ESP
®
intervenes, the ÷ ESP
®
warning
lamp flashes in the instrument cluster.
If ESP
®
intervenes:
X
Do not deactivate ESP
®
under any circum-
stances.
X
Only depress the accelerator pedal as far as
necessary when pulling away.
X
Adapt your driving style to suit the prevail-
ing road and weather conditions.
ECO start/stop function
The ECO start/stop function switches the
engine off automatically when the vehicle
stops moving. The engine starts automati-
cally when the driver wants to pull away again.
ESP
®
remains in its previously selected sta-
tus. Example: if ESP
®
was deactivated before
the engine was switched off, ESP
®
remains
deactivated when the engine is switched on
again.
Driving safety systems
75
Safety
Z
Deactivating/activating ESP
®
(except
AMG vehicles)
Important safety notes
You can select between the following sta-
tuses of ESP:
R
ESP
®
is activated.
R
ESP
®
is deactivated.
G
WARNING
If you deactivate ESP
®
, ESP
®
no longer sta-
bilizes the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP
®
in the situations descri-
bed in the following.
!
Avoid spinning the driven wheels for an
extended period with ESP
®
deactivated.
You could otherwise damage the drivetrain.
It may be best to deactivate ESP
®
in the fol-
lowing situations:
R
when using snow chains
R
in deep snow
R
on sand or gravel
i
Activate ESP
®
as soon as the situations
described above no longer apply. ESP
®
will
otherwise not be able to stabilize the vehi-
cle if the vehicle starts to skid or a wheel
starts to spin.
Deactivating/activating ESP
®
X
To deactivate: (Y page 241).
The å ESP
®
OFF warning lamp in the
instrument cluster lights up.
X
To activate: (Y page 241).
The å ESP
®
OFF warning lamp in the
instrument cluster goes out.
Characteristics when ESP
®
is deactivated
If ESP
®
is deactivated and one or more wheels
start to spin, the ÷ ESP
®
warning lamp in
the instrument cluster flashes. In such situa-
tions, ESP
®
will not stabilize the vehicle.
If you deactivate ESP
®
:
R
ESP
®
no longer improves driving stability.
R
engine torque is no longer limited and the
drive wheels are able to spin.
The spinning of the wheels results in a cut-
ting action for better traction on loose sur-
faces.
R
traction control is still activated.
R
ESP
®
still provides support when you
brake.
Deactivating/activating ESP
®
(AMG
vehicles)
Important safety notes
You can select between the following sta-
tuses of ESP:
R
ESP
®
is activated.
R
SPORT handling mode is activated.
R
ESP
®
is deactivated.
G
WARNING
When SPORT handling mode is activated,
there is a greater risk of skidding and acci-
dents.
Only activate SPORT handling mode in the sit-
uations described in the following.
G
WARNING
If you deactivate ESP
®
, ESP
®
no longer sta-
bilizes the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP
®
in the situations descri-
bed in the following.
!
Avoid spinning the driven wheels for an
extended period with ESP
®
deactivated.
You could otherwise damage the drivetrain.
It may be best to activate SPORT handling
mode in the following situations:
R
when using snow chains
R
in deep snow
76
Driving safety systems
Safety
R
on sand or gravel
R
on designated roads when the vehicle's
own oversteering and understeering char-
acteristics are desired
Driving in SPORT handling mode or without
ESP
®
requires an extremely qualified and
experienced driver.
i
Activate ESP
®
as soon as the situations
described above no longer apply. ESP
®
will
otherwise not be able to stabilize the vehi-
cle if the vehicle starts to skid or a wheel
starts to spin.
Deactivating/activating ESP
®
X
To activate SPORT handling mode:
briefly press button :.
The M SPORT handling mode warning
lamp in the instrument cluster lights up.
The SPORT handling modeSPORT handling mode message
appears in the multifunction display.
X
To deactivate SPORT handling mode:
briefly press button :.
The M SPORT handling mode warning
lamp in the instrument cluster goes out.
X
To deactivate ESP
®
: press button : until
the å ESP
®
OFF warning lamp lights up
in the instrument cluster.
The ÷ OFFOFF message appears in the mul-
tifunction display.
X
To activate ESP
®
: briefly press button :.
The å ESP
®
OFF warning lamp in the
instrument cluster goes out. The ÷ONON
message appears in the multifunction dis-
play.
Characteristics of activated SPORT han-
dling mode
If SPORT handling mode is activated and one
or more wheels start to spin, the ÷ ESP
®
warning lamp in the instrument cluster
flashes. ESP
®
only stabilizes the vehicle to a
limited degree.
When SPORT handling mode is activated:
R
ESP
®
only improves driving stability to a
limited degree.
R
traction control is still activated.
R
engine torque is only restricted to a limited
degree, and the drive wheels are able to
spin.
The spinning of the wheels results in a cut-
ting action for better traction on loose sur-
faces.
R
ESP
®
still provides support when you
brake.
Characteristics when ESP
®
is deactivated
If ESP
®
is deactivated and one or more wheels
start to spin, the ÷ ESP
®
warning lamp in
the instrument cluster does not flash. In such
situations, ESP
®
will not stabilize the vehicle.
If you deactivate ESP
®
:
R
ESP
®
no longer improves driving stability.
R
engine torque is restricted to a limited
degree and the drive wheels are able to
spin.
The spinning of the wheels results in a cut-
ting action for better traction on loose sur-
faces.
R
traction control is still activated.
R
PRE-SAFE
®
is no longer available, nor is it
activated if you brake firmly and ESP
®
intervenes.
R
PRE-SAFE
®
Brake is no longer available, it
is also not activated if you brake firmly and
ESP
®
intervenes.
R
ESP
®
still provides support when you
brake.
Driving safety systems
77
Safety
Z
EBD (electronic brake force distribu-
tion)
General information
EBD monitors and controls the brake pres-
sure on the rear wheels to improve driving
stability while braking.
Important safety notes
i
Observe the "Important safety notes" sec-
tion for driving safety systems (Y page 69).
G
WARNING
If EBD is malfunctioning, the rear wheels can
lock, e.g. under full braking. This increases the
risk of skidding and an accident.
You should therefore adapt your driving style
to the different handling characteristics. Have
the brake system checked at a qualified spe-
cialist workshop.
Observe information regarding indicator and
warning lamps (Y page 282) as well as dis-
play messages (Y page 254).
ADAPTIVE BRAKE
i
Observe the "Important safety notes" sec-
tion (Y page 69).
ADAPTIVE BRAKE enhances braking safety
and offers increased braking comfort. In addi-
tion to the braking function, ADAPTIVE BRAKE
also has the HOLD function (Y page 200) and
hill start assist (Y page 161).
PRE-SAFE
®
Brake
General information
i
Observe the "Important safety notes" sec-
tion (Y page 69).
PRESAFE
®
Brake is only available for vehi-
cles with the Driving Assistance package.
For PRE-SAFE
®
Brake to assist you when driv-
ing, the radar sensor system and the camera
system must be switched on and be opera-
tional.
With the help of the radar sensor system and
the camera system, PRE-SAFE
®
Brake can
detect obstacles that are in front of your vehi-
cle for an extended period of time.
In addition, pedestrians in the path of your
vehicle can be detected.
PRE-SAFE
®
Brake detects pedestrians using
typical characteristics such as the body con-
tours and posture of a person standing
upright.
i
Observe the restrictions described in the
"Important safety notes" sec-
tion“ (Y page 78).
PRE-SAFE
®
Brake can help you to minimize
the risk of a collision with a vehicle ahead or a
pedestrian, and reduce the effects of such a
collision. If PRE-SAFE
®
Brake has detected a
risk of collision, you will be warned visually
and acoustically as well as by automatic brak-
ing.
Important safety notes
G
WARNING
PRE-SAFE
®
Brake will initially brake your vehi-
cle by a partial application of the brakes if a
danger of collision is detected. There may be
a collision unless you brake yourself. Even
after subsequent full application of the brakes
a collision cannot always be avoided, partic-
ularly when approaching at too high a speed.
There is a risk of an accident.
Always apply the brakes yourself and try to
take evasive action, provided it is safe to do
so.
G
WARNING
PRE-SAFE
®
Brake cannot always clearly iden-
tify objects and complex traffic conditions.
78
Driving safety systems
Safety
In these cases, PRE-SAFE
®
Brake may:
R
give an unnecessary warning and then
brake the vehicle
R
not give a warning or intervene
There is a risk of an accident.
Always pay particular attention to the traffic
situation and be ready to brake, especially if
PRE-SAFE
®
Brake warns you. Terminate the
intervention in a non-critical driving situation.
In order to maintain the appropriate distance
to the vehicle in front and thus prevent a col-
lision, you must apply the brakes yourself.
G
WARNING
PRE-SAFE
®
Brake does not react:
R
to small people, e.g. children
R
to animals
R
to oncoming vehicles
R
to crossing traffic
R
when cornering
As a result, PRE-SAFE
®
Brake may neither
give warnings nor intervene in all critical sit-
uations. There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and be ready to brake.
In the event of snowfall or heavy rain, the rec-
ognition can be impaired.
Recognition by the radar sensor system is
also impaired in the event of:
R
there is dirt on the sensors or anything else
covering the sensors
R
there is interference by other radar sources
R
there are strong radar reflections, for
example in parking garages
R
a narrow vehicle traveling in front, e.g. a
motorbike
R
a vehicle traveling in front on a different line
relative to the center of your vehicle
Recognition by the camera system is also
impaired in the event of:
R
dirt on the camera or if the camera is cov-
ered
R
there is glare on the camera system, e.g.
from the sun being low in the sky
R
darkness
R
if:
-
pedestrians move quickly, e.g. into the
path of the vehicle
-
the camera system no longer recognizes
a pedestrian as a person due to special
clothing or other objects
-
a pedestrian is concealed by other
objects
-
the typical outline of a person is not dis-
tinguishable from the background
Following damage to the front end of the vehi-
cle, have the configuration and operation of
the radar sensors checked at a qualified spe-
cialist workshop. This also applies to colli-
sions at low speeds where there is no visible
damage to the front of the vehicle.
Following damage to the windshield, have the
configuration and operation of the camera
system checked at a qualified specialist work-
shop.
Function
X
To activate/deactivate: activate or deac-
tivate PRE-SAFE
®
Brake in the on-board
computer (Y page 241).
If the PRE-SAFE
®
Brake is not activated, the
æ symbol appears in the multifunction
display.
Starting at a speed of around 4 mph (7 km/h),
this function warns you if you rapidly
approach a vehicle in front. An intermittent
warning tone will then sound and the ·
distance warning lamp will light up in the
instrument cluster.
Driving safety systems
79
Safety
Z
X
Brake immediately to defuse the situation.
or
X
Take evasive action provided it is safe to do
so.
PRE-SAFE
®
Brake can also brake the vehicle
automatically under the following conditions:
R
the driver and front-passenger have their
seat belts fastened
and
R
the vehicle speed is between approx-
imately 4 mph (7 km/h) and 124 mph
(200 km/h)
At a speed of up to approximately 44 mph
(70 km/h), PRE-SAFE
®
Brake can also detect:
R
stationary objects in the path of your vehi-
cle, e.g. stopped or parked vehicles
R
pedestrians in the path of your vehicle
i
If there is an increased risk of collision,
preventive passenger protection measures
(PRE-SAFE
®
) are activated.
If the risk of collision with the vehicle in front
remains and you do not brake, take evasive
action or accelerate significantly, the vehicle
may perform automatic emergency braking,
up to the point of full brake application. Auto-
matic emergency braking is not performed
until immediately prior to an imminent acci-
dent.
You can prevent the intervention of the PRE-
SAFE
®
Brake at any time by:
R
depressing the accelerator pedal further.
R
activating kickdown.
R
releasing the brake pedal.
The braking action of PRE-SAFE
®
Brake is
ended automatically if:
R
you maneuver to avoid the obstacle.
R
there is no longer a risk of collision.
R
there is no longer an obstacle detected in
front of your vehicle.
STEER CONTROL
General information
STEER CONTROL helps you by transmitting a
noticeable steering force to the steering
wheel in the direction required for vehicle
stabilization.
This steering assistance is provided in partic-
ular if:
R
both right wheels or both left wheels are on
a slippery road surface when you brake
heavily.
R
the vehicle starts to skid.
Important safety notes
i
Observe the "Important safety notes" sec-
tion (Y page 69).
No steering support is provided from STEER
CONTROL, if:
R
ESP
®
is malfunctioning.
R
the lighting is faulty.
Power steering will, however, continue to
function.
Protection against theft
Immobilizer
The immobilizer prevents your vehicle from
being started without the correct SmartKey.
X
To activate with the SmartKey: remove
the SmartKey from the ignition lock.
X
To activate with KEYLESS-GO: switch the
ignition off and open the driver's door.
X
To deactivate: switch on the ignition.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Any-
one can start the engine if a valid SmartKey
has been left inside the vehicle.
i
The immobilizer is always deactivated
when you start the engine.
In the event that the engine cannot be star-
ted (yet the vehicle's battery is charged),
80
Protection against theft
Safety
the system is not operational. Contact an
authorized Mercedes-Benz Center or call
1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
ATA (anti-theft alarm system)
X
To arm: lock the vehicle with the SmartKey
or KEYLESS-GO.
Indicator lamp : flashes. The alarm sys-
tem is armed after approximately
15 seconds.
X
To disarm: unlock the vehicle with the
SmartKey or KEYLESS-GO.
or
X
Insert the SmartKey into the ignition lock.
A visual and audible alarm is triggered if the
alarm system is armed and you open:
R
a door
R
the vehicle with the mechanical key
R
the trunk lid/tailgate
R
the hood
X
To switch the alarm off with the Smart-
Key: press the % or & button on the
SmartKey.
The alarm is switched off.
or
X
Remove the Start/Stop button from the
ignition lock.
X
Insert the SmartKey into the ignition lock.
The alarm is switched off.
X
To stop the alarm using KEYLESS-GO:
grasp the outside door handle. The Smart-
Key must be outside the vehicle.
The alarm is switched off.
or
X
Press the Start/Stop button on the dash-
board. The SmartKey must be inside the
vehicle.
The alarm is switched off.
The alarm is not switched off, even if you
close the open door that triggered it, for
example.
i If the alarm continues for more than
30 seconds, the mbrace emergency call
system automatically notifies the Cus-
tomer Assistance Center. This is done
either by text message or data connection.
The emergency call system sends the mes-
sage or data provided that:
R
you have subscribed to the mbrace ser-
vice.
R
the mbrace service has been activated
properly.
R
the necessary mobile phone network is
available.
Protection against theft
81
Safety
Z
82
Useful information .............................. 84
SmartKey ............................................. 84
Doors .................................................... 89
Trunk/cargo compartment ................ 91
Side windows ...................................... 99
Sliding sunroof .................................. 103
83
Opening and closing
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
SmartKey
Important safety notes
G
WARNING
If children are left unsupervised in the vehicle,
they could:
R
open the doors, thus endangering other
people or road users.
R
get out and disrupt traffic.
R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
R
release the parking brake.
R
shifting the automatic transmission out of
park position P
R
Start the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
G
WARNING
If you attach heavy or large objects to the
SmartKey, the SmartKey could be uninten-
tionally turned in the ignition lock. This could
cause the engine to be switched off. There is a
risk of an accident.
Do not attach any heavy or large objects to the
SmartKey. Remove any bulky key rings before
inserting the SmartKey into the ignition lock.
!
Keep the SmartKey away from strong
magnetic fields. Otherwise, the remote
control function could be affected.
Strong magnetic fields can occur in the
vicinity of powerful electrical installations.
Do not keep the SmartKey:
R
with electronic devices, e.g. a mobile
phone or another SmartKey.
R
with metallic objects, e.g. coins or metal
foil.
R
inside metallic objects, e.g. a metal case.
This can affect the functionality of the
SmartKey.
SmartKey functions
:
& To lock the vehicle
;
F To open/close the trunk lid/tailgate
=
% To unlock the vehicle
X
To unlock centrally: press the % but-
ton.
If you do not open the vehicle within
approximately 40 seconds of unlocking:
R
the vehicle is locked again.
R
the theft deterrent locking system is
armed again.
X
To lock centrally: press the & button.
84
SmartKey
Opening and closing
The SmartKey centrally locks/unlocks:
R
the doors
R
the trunk lid/tailgate
R
the fuel filler flap
The turn signals flash once when unlocking
and three times when locking.
You can also set an audible signal to confirm
that the vehicle has been locked. The audible
signal can be activated and deactivated using
the on-board computer (Y page 246).
When it is dark, the surround lighting also
comes on if it is activated in the on-board
computer (Y page 245).
KEYLESS-GO
General notes
Bear in mind that the engine can be started by
any of the vehicle occupants if there is a KEY-
LESS-GO key in the vehicle.
Locking/unlocking centrally
You can start, lock or unlock the vehicle using
KEYLESS-GO. To do this, you only need carry
the SmartKey with you. You can combine the
functions of KEYLESS-GO with those of a con-
ventional SmartKey. Unlock the vehicle by
using KEYLESS-GO, for instance, and lock it
using the & button on the SmartKey.
When locking or unlocking with KEYLESS-GO,
the distance between the SmartKey and the
corresponding door handle must not be
greater than 3 ft (1 m).
A check which periodically establishes a radio
connection between the vehicle and the
SmartKey determines whether a valid Smart-
Key is in the vehicle. This occurs, for example:
R
when the external door handles are
touched
R
when starting the engine
R
while the vehicle is in motion
X
To unlock the vehicle: touch the inner
surface of the door handle.
X
To lock the vehicle: touch sensor sur-
face :.
X
Convenience closing feature: touch
recessed sensor surface ; for an exten-
ded period.
Further information on the convenience
closing feature (Y page 101).
X
To unlock the trunk lid/tailgate: pull the
handle on the trunk lid/tailgate.
The vehicle only unlocks the trunk lid/tail-
gate.
Changing the settings of the locking
system
You can change the settings of the locking
system. This means that only the driver's door
and the fuel filler flap are unlocked when the
vehicle is unlocked. This is useful if you fre-
quently travel on your own.
X
To change the setting: press and hold
down the % and & buttons on the
SmartKey simultaneously for approx-
imately six seconds until the battery check
lamp flashes twice (Y page 87).
i If the setting of the locking system is
changed within the signal range of the vehi-
cle, pressing the & or % button:
R
locks or
R
unlocks the vehicle
SmartKey
85
Opening and closing
Z
The SmartKey now functions as follows:
X
To unlock the driver's door: press the
% button once.
X
To unlock centrally: press the % but-
ton twice.
X
To lock centrally: press the & button.
The KEYLESS-GO function is changed as fol-
lows:
X
To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
X
To unlock centrally: touch the inner sur-
face of the door handle on the front-
passenger door or the rear door.
X
To lock centrally: touch the outer sensor
surface on one of the door handles.
X
To restore the factory settings: press
and hold down the % and & buttons
simultaneously for approximately six sec-
onds until the battery check lamp flashes
twice (Y page 87).
Mechanical key
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey, use the
mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid/tail-
gate, the anti-theft alarm system will be trig-
gered (Y page 81).
There are several ways to turn off the alarm:
X
To turn the alarm off with the SmartKey:
press the % or & button on the
SmartKey.
or
X
Insert the SmartKey into the ignition lock.
or
X
To deactivate the alarm with KEYLESS-
GO: press the Start/Stop button in the igni-
tion lock. The SmartKey must be in the
vehicle.
or
X
Lock or unlock the vehicle using KEYLESS-
GO. The SmartKey must be outside the
vehicle.
If you unlock the vehicle using the mechanical
key, the fuel filler flap will not be unlocked
automatically.
X
To unlock the fuel filler flap: insert the
SmartKey into the ignition lock.
Removing the mechanical key
X
Push release catch : in the direction of
the arrow and at the same time remove
mechanical key ; from the SmartKey.
For further information about:
R
unlocking the driver's door (Y page 91)
R
unlocking the trunk (Y page 98)
R
unlocking the tailgate (Y page 98)
R
locking the vehicle (Y page 91)
Inserting the mechanical key
X
Push mechanical key ; completely into
the SmartKey until it engages and release
catch : is back in its basic position.
86
SmartKey
Opening and closing
SmartKey battery
Checking the battery
X
Press the & or % button.
The battery is working properly if battery
check lamp : lights up briefly.
The battery is discharged if battery check
lamp : does not light up briefly.
X
Change the battery (Y page 87).
i If the SmartKey battery is checked within
the signal reception range of the vehicle,
pressing the & or % button:
R
locks or
R
unlocks the vehicle
i
You can get a battery at any qualified spe-
cialist workshop.
Replacing the battery
You require a CR 2025 3 V cell battery.
X
Take the mechanical key out of the Smart-
Key (Y page 86).
X
Press mechanical key ; into the opening
in the SmartKey in the direction of the
arrow until battery compartment cover :
opens. Do not hold battery compartment
cover : closed while doing so.
X
Remove battery compartment cover :.
X
Repeatedly tap the SmartKey against your
palm until battery = falls out.
X
Insert the new battery with the positive ter-
minal facing upwards. Use a lint-free cloth
to do so.
X
Make sure that the surface of the battery is
free of lint, grease and other contaminants.
X
Insert the front tabs of battery compart-
ment cover : into the housing and then
press to close it.
X
Insert mechanical key ; into the Smart-
Key.
X
Check the function of all SmartKey buttons
on the vehicle.
SmartKey
87
Opening and closing
Z
Problems with the SmartKey
Problem
Possible causes/consequences and MM Solutions
You can no longer lock
or unlock the vehicle
using the SmartKey.
The SmartKey battery is discharged or nearly discharged.
X
Check the SmartKey battery (Y page 87) and replace it if nec-
essary (Y page 87).
If this does not work:
X
Unlock (Y page 91) or lock (Y page 91) the vehicle using the
mechanical key.
The SmartKey is faulty.
X
Unlock (Y page 91) or lock (Y page 91) the vehicle using the
mechanical key.
X
Have the SmartKey checked at a qualified specialist workshop.
You can no longer lock
or unlock the vehicle
using KEYLESS-GO.
The SmartKey battery is discharged or nearly discharged.
X
Check the SmartKey battery (Y page 87) and replace it if nec-
essary (Y page 87).
If this does not work:
X
Unlock (Y page 91) or lock (Y page 91) the vehicle using the
mechanical key.
There is interference from a powerful source of radio waves.
X
Unlock (Y page 91) or lock (Y page 91) the vehicle using the
mechanical key.
KEYLESS-GO is malfunctioning.
X
Lock/unlock the vehicle using the remote control function of
the SmartKey.
X
Have the vehicle and SmartKey checked at a qualified specialist
workshop.
If the vehicle can also not be locked/unlocked using the remote
control function:
X
Unlock (Y page 91) or lock (Y page 91) the vehicle using the
mechanical key.
X
Have the vehicle and SmartKey checked at a qualified specialist
workshop.
You have lost a Smart-
Key.
X
Have the SmartKey deactivated at a qualified specialist work-
shop.
X
Report the loss immediately to the vehicle insurers.
X
If necessary, have the locks changed as well.
88
SmartKey
Opening and closing
Problem
Possible causes/consequences and MM Solutions
You have lost the
mechanical key.
X
Report the loss immediately to the vehicle insurers.
X
If necessary, have the locks changed as well.
The engine cannot be
started using the
SmartKey.
The on-board voltage is too low.
X
Switch off non-essential consumers, e.g. seat heating or interior
lighting, and try to start the engine again.
If this does not work:
X
Check the starter battery and charge it if necessary
(Y page 352).
or
X
Jump-start the vehicle (Y page 353).
or
X
Consult a qualified specialist workshop.
The engine cannot be
started using KEYLESS-
GO. The SmartKey is in
the vehicle.
The vehicle is locked.
X
Unlock the vehicle and try to start the vehicle again.
There is interference from a powerful source of radio waves.
X
Start your vehicle with the SmartKey in the ignition lock.
Doors
Important safety notes
G
WARNING
If children are left unsupervised in the vehicle,
they could:
R
open the doors, thus endangering other
people or road users.
R
get out and disrupt traffic.
R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
R
release the parking brake.
R
shifting the automatic transmission out of
park position P
R
Start the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
Ideally, place luggage or loads in the trunk/
cargo compartment. Observe the loading
guidelines (Y page 292).
Unlocking and opening doors from
the inside
You can only open the rear doors from inside
the vehicle if they are not secured by the
child-proof locks (Y page 68).
Doors
89
Opening and closing
Z
X
To unlock a front door: pull door han-
dle ;.
Locking knob : pops up.
The door is unlocked and can be opened.
X
To open a front door: pull door handle ;.
X
To unlock a rear door: pull up locking
knob :.
The door is unlocked and can be opened.
X
To open a rear door: pull door handle ;.
Centrally locking and unlocking the
vehicle from the inside
You can centrally lock or unlock the vehicle
from the inside.
X
To unlock: press button :.
X
To lock: press button ;.
If all the doors are closed, the vehicle locks.
Meanwhile, the fuel filler flap will not be
locked or unlocked.
You cannot unlock the vehicle centrally from
the inside if the vehicle has been locked with
the SmartKey or KEYLESS-GO.
You can open a door from inside the vehicle
even if it has been locked.
You can only open the rear doors from inside
the vehicle if they are not secured by the
child-proof locks (Y page 68).
If a locked door is opened from the inside, the
previous unlock status of the vehicle will be
taken into consideration if:
R
the vehicle was locked using the locking
button for the central locking, or
R
if the vehicle was locked automatically
The vehicle will be fully unlocked if it had pre-
viously been fully unlocked. If only the driver's
door had been previously unlocked, only the
door which has been opened from the inside
is unlocked.
Automatic locking feature
X
To deactivate: press and hold button :
for about five seconds until a tone sounds.
X
To activate: press and hold button ; for
about five seconds until a tone sounds.
i
If you press one of the two buttons and do
not hear a tone, the relevant setting has
already been selected.
The vehicle is locked automatically when the
ignition is switched on and the wheels are
turning.
90
Doors
Opening and closing
You could therefore lock yourself out if:
R
the vehicle is being pushed.
R
the vehicle is being towed.
R
the vehicle is on a roller dynamometer.
You can also switch the automatic locking
function on and off using the on-board com-
puter (Y page 246).
Unlocking the driver's door (mechan-
ical key)
If the vehicle can no longer be unlocked with
the SmartKey, use the mechanical key.
X
Take the mechanical key out of the Smart-
Key (Y page 86).
X
Insert the mechanical key into the lock of
the driver's door as far as it will go.
X
Turn the mechanical key counter-clockwise
to position 1.
The door is unlocked.
X
Turn the mechanical key back and remove
it.
X
Insert the mechanical key into the Smart-
Key.
If you use the mechanical key to unlock and
open the driver's door, the anti-theft alarm
system will be triggered (Y page 81).
Locking the vehicle (mechanical key)
If the vehicle can no longer be locked with the
SmartKey, use the mechanical key.
X
Open the driver's door.
X
Close the front-passenger door, the rear
doors and the trunk lid/tailgate.
X
Press the locking button (Y page 90).
X
Check whether the locking knobs on the
front-passenger door and the rear doors
are still visible. Press down the locking
knobs by hand, if necessary.
X
Close the driver's door.
X
Take the mechanical key out of the Smart-
Key (Y page 86).
X
Insert the mechanical key into the lock of
the driver's door as far as it will go.
X
Turn the mechanical key clockwise as far as
it will go to position 1.
X
Turn the mechanical key clockwise to posi-
tion 1.
The door is unlocked.
X
Turn the mechanical key back and remove
it.
X
Make sure that the doors and the trunk lid/
tailgate are locked.
X
Insert the mechanical key into the Smart-
Key.
Trunk/cargo compartment
Important safety notes
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid/tailgate is open when the engine is
Trunk/cargo compartment
91
Opening and closing
Z
running, especially if the vehicle is in motion.
There is a risk of poisoning.
Always switch off the engine before opening
the trunk lid/tailgate. Never drive with the
trunk lid/tailgate open.
!
The trunk lid/tailgate swings upwards
and to the rear when opened. Therefore,
make sure that there is sufficient clearance
above and behind the trunk lid/tailgate.
Ideally, place luggage or loads in the trunk/
cargo compartment. Observe the loading
guidelines (Y page 292).
Do not leave the SmartKey in the trunk/cargo
compartment. You could otherwise lock your-
self out.
Sedan without trunk lid remote closing
feature: the trunk lid can be:
R
opened and closed manually from outside
R
opened automatically from outside
R
opened automatically from inside
R
locked separately
R
opened with the emergency release button
R
unlocked with the mechanical key
Sedan with trunk lid remote closing fea-
ture: the trunk lid can be:
R
opened and closed manually from outside
R
opened/closed automatically from outside
R
opened/closed automatically from inside
R
locked separately
R
opened with the emergency release button
R
unlocked with the mechanical key
Wagon: you can:
R
open and close the tailgate manually from
outside
R
open the tailgate manually from inside
(Wagon with a folding bench seat)
R
open and close the tailgate automatically
from outside
R
open and close the tailgate automatically
from inside
R
limit the opening angle of the tailgate
R
unlock the tailgate using the mechanical
key
Trunk lid/tailgate reversing feature
The trunk lid/tailgate is equipped with an
automatic reversing feature. It reacts if a solid
object obstructs or restricts the trunk lid/
tailgate during the closing procedure. The
trunk lid/tailgate opens again automatically.
The automatic reversing feature is only an aid
and is not a substitute for your attentiveness
to the trunk lid/tailgate while it is closing.
G
WARNING
The reversing feature does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
over the last 1/3 in (8 mm) of the closing
movement
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure.
If somebody becomes trapped:
R
press the F button on the SmartKey, or
R
press the remote operating switch on the
driver’s door, or
R
press the closing or locking button on the
trunk lid/tailgate, or
R
pull on the handle on the trunk lid/tailgate
92
Trunk/cargo compartment
Opening and closing
Opening/closing from outside
Opening
Handle (example: Sedan)
X
Press the % button on the SmartKey.
X
Sedan: pull handle :.
X
Raise the trunk lid.
Wagon: if you pull handle : and keep it in
this position, you can open the tailgate man-
ually. If you release the handle, the tailgate
opens automatically.
Closing
Recess (example: Sedan)
X
Pull the trunk lid/tailgate down using
recess :.
X
Wagon: let the tailgate drop and engage in
the lock.
X
If necessary, lock the vehicle with the &
button on the SmartKey (Y page 84) or with
KEYLESS-GO (Y page 85).
i
If a KEYLESS-GO key is detected in the
trunk/cargo compartment, the trunk lid/
tailgate will not lock.
Sedan: the trunk lid then opens again.
Opening/closing automatically from
outside
Important safety notes
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid/tailgate is open when the engine is
running, especially if the vehicle is in motion.
There is a risk of poisoning.
Always switch off the engine before opening
the trunk lid/tailgate. Never drive with the
trunk lid/tailgate open.
!
The trunk lid/tailgate swings upwards
and to the rear when opened. Therefore,
make sure that there is sufficient clearance
above and behind the trunk lid/tailgate.
Opening
You can open the trunk lid/tailgate automat-
ically with the SmartKey or the handle in the
trunk lid/tailgate.
X
Press and hold the F button on the
SmartKey until the trunk lid/tailgate
opens.
or
X
If the trunk lid/tailgate is unlocked, pull the
handle of the trunk lid/tailgate and release
it again immediately (Y page 93).
Trunk/cargo compartment
93
Opening and closing
Z
Closing
Closing button and locking button (example:
Sedan)
Sedan: on vehicles with the trunk lid remote
closing feature, you can close the trunk lid
automatically. For vehicles with trunk lid
remote closing feature and KEYLESS-GO: you
can simultaneously close the trunk lid and
lock the vehicle.
Wagon: for vehicles with KEYLESS-GO, you
can simultaneously close the tailgate and
lock the vehicle.
X
To close: press closing button : in the
trunk lid/tailgate.
X
To simultaneously close the trunk lid/
tailgate and lock the vehicle:
Press closing button ; in the trunk lid/
tailgate. The KEYLESS-GO key must be in
the rear detection range of the vehicle.
The trunk lid/tailgate closes.
If all the doors are closed, the vehicle locks.
i
If KEYLESS-GO detects a SmartKey in the
trunk/cargo compartment, the trunk lid/
tailgate opens again after it is closed.
If KEYLESS-GO detects a second SmartKey
outside the vehicle, the trunk lid/tailgate
remains closed.
HANDS-FREE ACCESS
Important safety notes
G
WARNING
The vehicle's exhaust system may be very hot.
You could burn yourself by touching the
exhaust system if you use HANDS-FREE
ACCESS. There is a risk of injury. Always
ensure that you only make the kicking move-
ment within the detection range of sensors.
!
If the SmartKey is within the rear detec-
tion range of KEYLESS-GO, the following
situations, for example, could lead to the
unintentional opening of the trunk lid/tail-
gate:
R
using a car wash
R
using a power washer
Make sure that the SmartKey is at least
6.5 ft (2 m) away from the vehicle.
General notes
Sedan: with KEYLESS-GO and HANDS-FREE
ACCESS, you can open or close the trunk lid
or stop the closing procedure without using
your hands.
Wagon: with KEYLESS-GO and HANDS-FREE
ACCESS, you can open or close the tailgate or
stop the procedure without using your hands.
This is useful if you have your hands full. To do
this, make a kicking movement under the
bumper with your foot.
Observe the following points:
R
Carry your KEYLESS-GO key about your
person. The KEYLESS-GO key must be in
the rear detection range of the vehicle.
R
When making the kicking movement, make
sure that you are standing firmly on the
ground and that there is sufficient clear-
ance to the rear of the vehicle. You could
otherwise lose your balance e.g. on ice.
94
Trunk/cargo compartment
Opening and closing
(Example: Sedan)
R
Always ensure that you only make the kick-
ing movement within the detection range of
sensors :.
R
Stand at least 12 in (30 cm) away from the
rear area while doing so.
R
Do not come into contact with the bumper
while making the kicking movement. Oth-
erwise, the sensors may not function cor-
rectly.
R
HANDS-FREE ACCESS does not function
when the engine is started.
R
If a KEYLESS-GO key is within the rear
detection range of KEYLESS-GO, HANDS-
FREE ACCESS could be triggered. For this
reason, the trunk lid/tailgate could open or
close unintentionally, e.g. if you:
-
set something down or lift something up
behind the vehicle.
-
polish the rear of the vehicle.
Do not carry the KEYLESS-GO key about
your person in these situations or in situa-
tions similar to these. You can thus avoid
unintentionally opening or closing the trunk
lid/tailgate.
R
Dirt caused by road salt around sensors :
may restrict functionality.
R
Using the HANDS-FREE ACCESS with a
prosthetic leg may restrict functionality.
Operation
(Example: Sedan)
X
To open/close: kick into sensor detection
range : under the bumper with your foot.
Sedan: you will hear a warning tone while
the trunk lid is closing.
Wagon: you will hear a warning tone while
the tailgate is opening or closing.
X
If the trunk lid/tailgate does not open
after several attempts: wait at least ten
seconds, then move your foot under the
bumper again.
i
If you hold your foot under the bumper for
too long, the trunk lid/ tailgate does not
open or close. Repeat the leg movement
more quickly if this occurs.
Sedan: to cancel the closing procedure:
R
move your foot in sensor detection
range : under the bumper
R
pull the handle on the outside of the trunk
lid
R
press the closing button in the trunk lid, or
R
press the F button on the SmartKey
If the closing procedure of the trunk lid is
canceled, the trunk lid opens again auto-
matically.
Wagon: to stop the opening or closing pro-
cedure:
R
move your foot in sensor detection
range : under the bumper
R
pull the handle on the outside of the tailgate
Trunk/cargo compartment
95
Opening and closing
Z
R
press the closing or locking button on the
tailgate or
R
press the F button on the key
If the tailgate closing procedure has been
stopped:
R
move your foot under the bumper again and
the tailgate will open
If the tailgate opening procedure has been
stopped:
R
move your foot under the bumper again and
the tailgate will close
Opening/closing automatically from
inside
Important safety notes
G
WARNING
Parts of the body could become trapped dur-
ing automatic closing of the trunk lid or tail-
gate. Moreover, people, e.g. children, may be
standing in the closing area or may enter the
closing area during the closing process. There
is a risk of injury.
Make sure that nobody is in the vicinity of the
closing area during the closing process.
Use one of the following options to stop the
closing process:
R
Press the F button on the SmartKey.
R
Press the remote operating switch on the
driver’s door.
R
Press the closing or locking button on the
trunk lid/tailgate.
R
Pull the handle on the trunk lid/tailgate.
G
WARNING
The trunk lid/tailgate can be automatically
opened or closed even if the SmartKey is not
in the vehicle. If children are left unsupervised
in the vehicle, they could activate the func-
tions. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid/tailgate is open when the engine is
running, especially if the vehicle is in motion.
There is a risk of poisoning.
Always switch off the engine before opening
the trunk lid/tailgate. Never drive with the
trunk lid/tailgate open.
!
The trunk lid/tailgate swings upwards
and to the rear when opened. Therefore,
make sure that there is sufficient clearance
above and behind the trunk lid/tailgate.
Opening and closing
X
To open: pull remote operating switch for
the trunk lid/tailgate : until the trunk lid/
tailgate opens.
X
To close (Sedan): press remote operating
switch for trunk lid : until the trunk lid is
completely closed.
X
To close (Wagon): turn the SmartKey to
position 1 or 2 in the ignition lock.
X
Press remote operating switch for tail-
gate : until the tailgate is completely
closed.
You can open and close the trunk lid/tailgate
from the driver's seat when the vehicle is sta-
tionary and unlocked.
96
Trunk/cargo compartment
Opening and closing
Limiting the opening angle of the tail-
gate (Wagon)
Important safety notes
!
Make sure there is sufficient clearance to
open the tailgate fully when setting the
opening angle. The tailgate could otherwise
be damaged. Ideally, set the opening angle
outside.
Activating
You can limit the opening angle of the tail-
gate. This is possible in the top half of its
opening range, up to approximately 8 in
(20 cm) before the stop.
X
To open the tailgate: pull the handle on
the tailgate.
X
To stop the opening procedure at the
desired position: press the closing button
(Y page 93)in the tailgate or pull the handle
on the outside of the tailgate again.
X
To store the position: press and hold the
closing button in the tailgate until you hear
a short tone.
The opening angle limiter is activated. The
tailgate will now stop in the stored position
when opening.
Deactivating
X
Press and hold the closing button
(Y page 93) in the tailgate until you hear
two short tones.
Opening the tailgate from inside the
vehicle (Wagon with a folding bench
seat)
General notes
!
The tailgate swings upwards and to the
rear when opened. Therefore, make sure
that there is sufficient clearance above and
behind the tailgate.
i
Tailgate opening dimensions
(Y page 419).
Opening
Inside of tailgate
X
To unlock the tailgate: slide locking
catch ; to the right.
X
To open: pull the top of handle :.
X
Swing the tailgate upwards.
X
To lock the tailgate: slide locking catch ;
to the left.
Locking the trunk separately (Sedan)
You can lock the trunk separately. If you then
unlock the vehicle centrally, the trunk
remains locked and cannot be opened.
X
Close the trunk lid.
X
Take the mechanical key out of the Smart-
Key (Y page 86).
Trunk/cargo compartment
97
Opening and closing
Z
X
Insert the mechanical key into the trunk lid
lock as far as it will go.
X
Turn the mechanical key clockwise from
position 1 to position 2.
X
Remove the mechanical key.
X
Insert the mechanical key into the Smart-
Key.
Unlocking the trunk (Sedan)
!
The trunk lid swings upwards when
opened. Therefore, make sure that there is
sufficient clearance above the trunk lid.
If the trunk cannot be unlocked with the
SmartKey or KEYLESS-GO, use the mechani-
cal key.
If you use the mechanical key to unlock and
open the trunk lid, the anti-theft alarm system
will be triggered (Y page 81).
X
Take the mechanical key out of the Smart-
Key (Y page 86).
X
Insert the mechanical key into the trunk lid
lock as far as it will go.
X
Turn the mechanical key counter-clockwise
from position 1 as far as it will go to posi-
tion 2.
The trunk is unlocked.
X
Turn the mechanical key back to position
1 and remove it.
X
Insert the mechanical key into the Smart-
Key.
i
When you lock the vehicle (Y page 91),
the trunk is also locked.
Trunk emergency release (Sedan)
You can open the trunk lid from inside the
vehicle with the emergency release button.
X
Press emergency release button : briefly.
The trunk lid unlocks and opens.
The trunk lid can be unlocked and opened
with the trunk lid emergency release when
the vehicle is stationary or while driving.
The trunk lid emergency release does not
open the trunk lid if the battery is disconnec-
ted or discharged.
Trunk lid emergency release light:
R
emergency release button : flashes for
30 minutes after the trunk lid is opened.
R
emergency release button : flashes for
60 minutes after the trunk lid is closed.
Tailgate emergency release (Wagon)
General notes
!
The tailgate swings upwards and to the
rear when opened. Therefore, make sure
that there is sufficient clearance above and
behind the tailgate.
i
Tailgate opening dimensions
(Y page 419).
If the tailgate can no longer be opened from
outside the vehicle, use the emergency
release on the inside of the tailgate.
On vehicles with a folding bench seat, you can
use the handle to open the tailgate from
inside the vehicle (Y page 93).
98
Trunk/cargo compartment
Opening and closing
Opening
X
Fold the rear seat backrest forwards
(Y page 297).
X
Remove cargo compartment cover
(Y page 301).
X
Take the mechanical key out of the Smart-
Key (Y page 86).
X
Insert mechanical key ; into the opening
in paneling :.
X
Turn mechanical key ; 90° clockwise.
X
Push mechanical key ; in the direction of
the arrow and open the tailgate.
X
Insert the mechanical key into the Smart-
Key.
i
When you lock the vehicle (Y page 91),
the cargo compartment is also locked.
Side windows
Important safety notes
G
WARNING
While opening the side windows, body parts
could become trapped between the side win-
dow and the door frame as the side window
moves. There is a risk of injury.
Make sure that nobody touches the side win-
dow during the opening procedure. If some-
body becomes trapped, release the switch or
pull the switch to close the side window again.
G
WARNING
While closing the side windows, body parts in
the closing area could become trapped. There
is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If somebody
becomes trapped, release the switch or press
the switch to open the side window again.
G
WARNING
If children operate the side windows they
could become trapped, particularly if they are
left unsupervised. There is a risk of injury.
Activate the override feature for the rear side
windows. When leaving the vehicle, always
take the SmartKey with you and lock the vehi-
cle. Never leave children unsupervised in the
vehicle.
Side window reversing feature
The side windows are equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts a side window during the
closing process, the side window opens again
automatically. However, the automatic
reversing feature is only an aid and does not
relieve you of the responsibility of paying
attention when closing a side window.
G
WARNING
The reversing feature does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
over the last 1/6 in(4 mm) of the closing
movement
R
during resetting
R
when closing the side window again man-
ually immediately after automatic reversing
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
Side windows
99
Opening and closing
Z
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side win-
dows
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding side window.
The switches on the driver's door take prec-
edence.
:
Front left
;
Front right
=
Rear right
?
Rear left
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
To open manually: press and hold the cor-
responding switch.
X
To open fully: press the switch beyond the
point of resistance and release it.
Automatic operation is started.
X
To close manually: pull and hold the cor-
responding switch.
X
To close fully: pull the corresponding
switch beyond the pressure point.
Automatic operation is started.
X
To interrupt automatic operation:
press/pull the corresponding switch again.
i
If you press/pull the switch beyond the
point of resistance, automatic operation is
started in the corresponding direction. You
can stop automatic operation by pressing/
pulling the switch again.
i
You can continue to operate the side win-
dows after you switch off the engine or
remove the SmartKey. This function is
available for up to five minutes or until the
driver's or front-passenger door is opened.
i
When the override feature for the side
windows is activated (Y page 68), the side
windows cannot be operated from the rear.
Convenience opening
General notes
You can ventilate the vehicle before you start
driving. To do this, the SmartKey is used to
carry out the following functions simultane-
ously:
R
unlock the vehicle
R
open the side windows
R
open the sliding sunroof or the panorama
roof with power tilt/sliding panel and the
roller sunblinds
R
switch on the seat ventilation for the driv-
er's seat
i
The convenience opening feature can
only be operated using the SmartKey. The
SmartKey must be in close proximity to the
vehicle.
Convenience opening
X
Press and hold the % button until the
side windows and the sliding sunroof or the
panorama roof with power tilt/sliding
panel are in the desired position.
If the roller sunblinds of the panorama roof
with power tilt/sliding panel are closed, the
roller sunblinds are opened first.
X
Press and hold the % button again until
the panorama roof with power tilt/sliding
panel is in the desired position.
X
To interrupt convenience opening:
release the % button.
100
Side windows
Opening and closing
Convenience closing feature
Important safety notes
Information on the side window reversing fea-
ture (Y page 99).
G
WARNING
When the convenience closing feature is oper-
ating, parts of the body could become trapped
in the closing area of the side window and the
sliding sunroof. There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is oper-
ating. Make sure that no body parts are in
close proximity during the closing procedure.
Proceed as follows if someone is trapped:
With the SmartKey:
X
Release the & button.
X
Press and hold the % button until the
side windows and the sliding sunroof or the
panorama roof with power tilt/sliding
panel open again.
Using KEYLESS-GO:
X
Release the sensor surface on the door
handle.
X
Pull the door handle immediately and hold
it.
The side windows and the sliding sunroof or
the panorama roof with power tilt/sliding
panel open.
General notes
When you lock the vehicle, you can simulta-
neously:
R
close the side windows
R
close the sliding sunroof or the panorama
roof with power tilt/sliding panel
On vehicles with a panorama roof with power
tilt/sliding panel, you can then close the
roller sunblinds.
Using the SmartKey
X
Vehicles without KEYLESS-GO: point the
tip of the SmartKey at the door handle on
the driver's door.
X
Vehicles with KEYLESS-GO: the Smart-
Key must be in close proximity to the vehi-
cle.
X
Press and hold the & button until the
side windows and the sliding sunroof or the
panorama roof with power tilt/sliding
panel are fully closed.
X
Make sure that all the side windows and the
sliding sunroof or panorama roof with
power tilt/sliding panel are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
X
Press and hold the & button again until
the roller sunblinds of the panorama roof
with power tilt/sliding panel close.
X
To interrupt convenience closing:
release the & button.
Using KEYLESS-GO
The KEYLESS-GO key must be outside the
vehicle. All the doors must be closed.
X
Touch recessed sensor surface : on the
door handle until the side windows and the
sliding sunroof or the panorama roof with
power tilt/sliding panel are fully closed.
X
Touch recessed sensor surface : on the
door handle until the side windows and the
sliding sunroof or the panorama roof with
power tilt/sliding panel are fully closed.
Side windows
101
Opening and closing
Z
i
Make sure you only touch recessed sen-
sor surface :.
X
Make sure that all the side windows and the
sliding sunroof or panorama roof with
power tilt/sliding panel are closed.
On vehicles with a panorama roof with power
tilt/sliding panel:
X
Touch recessed sensor surface : on the
door handle again until the roller sunblinds
of the panorama roof with power tilt/slid-
ing panel close.
X
To interrupt convenience closing:
release recessed sensor surface : on the
door handle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (Y page 100).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch
on the door control panel until the side win-
dow is completely closed (Y page 100).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly. If
this is not the case, repeat the steps above
again.
102
Side windows
Opening and closing
Problems with the side windows
G
WARNING
If you close a side window again immediately after it has been blocked or reset, the side window
closes with increased or maximum force. The reversing feature is then not active. Parts of the
body could be trapped in the closing area in the process. This poses an increased risk of injury or
even fatal injury.
Make sure that no parts of the body are in the closing area. To stop the closing process, release
the switch or push the switch again to reopen the side window.
Problem
Possible causes/consequences and MM Solutions
A side window cannot
be closed because it is
blocked by objects, e.g.
leaves in the window
guide.
X
Remove the objects.
X
Close the side window.
A side window cannot
be closed and you can-
not see the cause.
If a side window is obstructed during closing and reopens again
slightly:
X
Immediately after the window blocks, pull the corresponding
switch again until the side window has closed.
The side window is closed with increased force.
If a side window is obstructed again during closing and reopens
again slightly:
X
Immediately after the window blocks, pull the corresponding
switch again until the side window has closed.
The side window is closed without the anti-entrapment feature.
Sliding sunroof
Important safety notes
Your vehicle may be equipped with a sliding
sunroof or a panorama roof with power tilt/
sliding panel. In this section, the term "sliding
sunroof" refers to both types of sliding sun-
roof.
G
WARNING
While opening and closing the sliding sunroof,
body parts in close proximity could become
trapped. There is a risk of injury.
Make sure that no body parts are in close
proximity during the opening and closing pro-
cedures.
If somebody becomes trapped:
R
release the switch immediately, or
R
during automatic operation, push the
switch briefly in any direction
The opening or closing procedure will be stop-
ped.
G
WARNING
If children operate the sliding sunroof they
could become trapped, particularly if they are
left unsupervised. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
Sliding sunroof
103
Opening and closing
Z
!
Only open the sliding sunroof if it is free of
snow and ice. Otherwise, malfunctions may
occur.
Do not allow anything to protrude from the
sliding sunroof. Otherwise, the seals could
be damaged.
!
The weather can change abruptly. It could
start to rain or snow. Make sure that the
sliding sunroof is closed when you leave the
vehicle. The vehicle electronics can be
damaged if water enters the vehicle inte-
rior.
i
Resonance noises can occur in addition to
the usual airflow noises when the sliding
sunroof is open. They are caused by minor
pressure fluctuations in the vehicle interior.
Change the position of the sliding sunroof
or open a side window slightly to reduce or
eliminate these noises.
Sliding sunroof reversing feature
Your vehicle may be equipped with a sliding
sunroof or a panorama roof with power tilt/
sliding panel. In this section, the term "sliding
sunroof" refers to both types of sliding sun-
roof.
The sliding sunroof is equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts the sliding sunroof during
the closing process, the sliding sunroof opens
again automatically. However, the automatic
reversing feature is only an aid and does not
relieve you of the responsibility of paying
attention when closing the sliding sunroof.
G
WARNING
The reversing feature does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
over the last 1/6 in(4 mm) of the closing
movement
R
during resetting
R
when closing the sliding sunroof again man-
ually immediately after automatic reversing
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure.
If somebody becomes trapped:
R
release the switch immediately, or
R
during automatic operation, push the
switch briefly in any direction
The closing process is stopped.
Operating the sliding sunroof
Opening and closing
Overhead control panel
:
To raise
;
To open
=
To close/lower
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Press or pull the 3 switch in the corre-
sponding direction.
i
If you press the 3 switch beyond the
point of resistance, an automatic opening/
closing process is started in the corre-
sponding direction. You can stop automatic
operation by pressing/pulling the switch
again.
i
The automatic opening and raising fea-
ture is available only when the sliding sun-
roof is closed.
104
Sliding sunroof
Opening and closing
The sun protection cover automatically opens
along with the sliding sunroof. You can open
or close the sun protection cover manually
when the sliding sunroof is raised or closed.
i
You can continue to operate the sliding
sunroof after switching off the engine or
removing the SmartKey from the ignition
lock. This function remains active for five
minutes or until you open a front door.
Resetting
!
If the sliding sunroof still cannot be
opened or closed fully after resetting, con-
tact a qualified specialist workshop.
Reset the sliding sunroof if it does not move
smoothly.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
X
Raise the sliding sunroof fully at the rear
(Y page 104).
X
Keep the 3 switch pressed for another
second.
X
Make sure that the sliding sunroof can be
fully opened and closed again
(Y page 104).
X
If this is not the case, repeat the steps
above again.
Operating the panorama roof with
power tilt/sliding panel
Overhead control panel
:
To raise
;
To open
=
To close/lower
The panorama roof with power tilt/sliding
panel can only be operated when the roller
sunblind is open.
X
To open and close: turn the SmartKey to
position 1 or 2 in the ignition lock.
X
Press or pull the 3 switch in the corre-
sponding direction.
i
If you press the 3 switch beyond the
point of resistance, an automatic opening/
closing process is started in the corre-
sponding direction. You can stop automatic
operation by operating the switch again.
Operating the roller sunblind for the
panorama roof with power tilt/sliding
panel
Important safety notes
G
WARNING
When opening or closing the roller sunblind,
parts of the body could be trapped between
the roller sunblind and the frame or sliding
sunroof. There is a risk of injury.
When opening or closing make sure that no
parts of the body are in the sweep of the roller
sunblind.
Sliding sunroof
105
Opening and closing
Z
If somebody becomes trapped:
R
release the switch immediately, or
R
during automatic operation, push the
switch briefly in any direction
The opening or closing procedure will be stop-
ped.
The roller sunblind shields the vehicle interior
from sunlight. The two roller sunblinds can
only be opened and closed together when the
panorama roof with power tilt/sliding panel is
closed.
Roller sunblind reversing feature
The roller sunblind is equipped with an auto-
matic reversing feature. If a solid object
blocks or restricts the roller sunblind during
the closing process, the roller sunblind opens
again automatically. The automatic reversing
feature is only an aid and is not a substitute
for your attentiveness to the roller sunblind
while it is closing.
G
WARNING
The reversing feature especially does not
react to soft, light and thin objects such as
small fingers. This means that the reversing
feature cannot prevent someone being trap-
ped in these situations. There is a risk of
injury.
When closing make sure that no parts of the
body are in the sweep of the roller sunblind.
If somebody becomes trapped:
R
release the switch immediately, or
R
during automatic operation, push the
switch briefly in any direction
The closing process is stopped.
Opening and closing
Overhead control panel
:
To open
;
To open
=
To close
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Press or pull the 3 switch in the corre-
sponding direction.
i
If you press or pull the 3 switch
beyond the point of resistance, an auto-
matic opening/closing process is started
in the corresponding direction. You can
stop automatic operation by pressing or
pulling again.
Resetting the panorama roof with
power tilt/sliding panel and roller
sunblind
!
If the panorama roof with power tilt/slid-
ing panel and the roller sunblinds cannot be
fully opened or closed after resetting, con-
tact a qualified specialist workshop.
Reset the panorama roof with power tilt/slid-
ing panel and the roller sunblinds if the pan-
orama roof with power tilt/sliding panel or
the roller sunblinds do not move smoothly.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Pull the 3 switch repeatedly to the point
of resistance in the direction of arrow =
106
Sliding sunroof
Opening and closing
until the panorama roof with power tilt/
sliding panel is fully closed (Y page 106).
X
Keep the 3 switch pulled for an addi-
tional second.
X
Pull the 3 switch repeatedly to the point
of resistance in the direction of arrow =
until the roller sunblinds are fully closed.
X
Keep the 3 switch pulled for an addi-
tional second.
X
Make sure that the panorama roof with
power tilt/sliding panel (Y page 105) and
the roller sunblinds (Y page 106) can be
fully opened again.
X
If this is not the case, repeat the steps
above again.
Sliding sunroof
107
Opening and closing
Z
Problems with the sliding sunroof
G
WARNING
If you close the sliding sunroof again immediately after it has been blocked or reset, the sliding
sunroof closes with increased or maximum force. The reversing feature is then not active. Parts
of the body could be trapped in the closing area in the process. This poses an increased risk of
injury or even fatal injury.
Make sure that no parts of the body are in the closing area.
If somebody becomes trapped:
R
release the switch immediately, or
R
during automatic operation, push the switch briefly in any direction
The closing process is stopped.
!
If the sliding sunroof still cannot be opened or closed as a result of a malfunction, contact
a qualified specialist workshop.
Problem
Possible causes/consequences and MM Solutions
The sliding sunroof can-
not be closed and you
cannot see the cause.
If the sliding sunroof is obstructed during closing and reopens
again slightly:
X
Immediately after the sliding sunroof blocks, pull the 3
switch in the overhead control panel down to the point of resist-
ance and hold it until the sliding sunroof is closed.
The sliding sunroof is closed with increased force.
If the sliding sunroof is obstructed again during closing and then
reopens slightly:
X
Immediately after the sliding sunroof blocks, pull the 3
switch in the overhead control panel down to the point of resist-
ance and hold it until the sliding sunroof is closed.
The sliding sunroof is closed without the anti-entrapment fea-
ture.
108
Sliding sunroof
Opening and closing
Useful information ............................ 110
Correct driver's seat position .......... 110
Seats .................................................. 111
Steering wheel .................................. 119
Mirrors ............................................... 122
Memory function .............................. 125
109
Seats, steering wheel and mirrors
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Correct driver's seat position
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
X
Observe the safety guidelines on seat
adjustment (Y page 111).
X
Make sure that seat = is adjusted prop-
erly.
Electrical seat adjustment (Y page 112)
When adjusting the seat, make sure that:
R
you are as far away from the driver's air bag
as possible
R
you are sitting in a normal upright position
R
you can fasten the seat belt properly
R
you have moved the backrest to an almost
vertical position
R
you have set the seat cushion angle so that
your thighs are gently supported
R
you can depress the pedals properly
X
Check whether the head restraint is adjus-
ted properly.
When doing so, make sure that you have
adjusted the head restraint so that the back
of your head is supported at eye level by the
center of the head restraint.
X
Observe the safety guidelines on steering
wheel adjustment (Y page 119).
X
Make sure that steering wheel : is adjus-
ted properly.
110
Correct driver's seat position
Seats, steering wheel and mirrors
Adjusts the steering wheel electrically
(Y page 119)
When adjusting the steering wheel, make
sure that:
R
you can hold the steering wheel with your
arms slightly bent
R
you can move your legs freely
R
you can see all the displays in the instru-
ment cluster clearly
X
Observe the safety guidelines for seat belts
(Y page 44).
X
Check whether you have fastened the seat
belt ; properly (Y page 46).
The seat belt should:
R
fit snugly across your body
R
be routed across the middle of your shoul-
der
R
be routed in your pelvic area across the hip
joints
X
Before starting off, adjust the rear-view mir-
ror and the exterior mirrors in such a way
that you have a good view of road and traf-
fic conditions (Y page 122).
X
Vehicles with a memory function: save
the seat, steering wheel and exterior mirror
settings with the memory function
(Y page 125).
Seats
Important safety notes
G
WARNING
Children could become trapped if they adjust
the seats, particularly when unattended.
There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The seats can still be adjusted when there is
no SmartKey in the ignition lock.
G
WARNING
If head restraints are not installed and adjus-
ted correctly, they cannot provide protection
as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
Observe the safety notes on "Air bags"
(Y page 48) and "Children in the Vehicle"
(Y page 62).
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
G
WARNING
If you adjust the seat height carelessly, you or
other vehicle occupants could be trapped and
thereby injured. Children in particular could
accidentally press the electrical seat adjust-
ment buttons and become trapped. There is a
risk of injury.
While moving the seats, make sure that your
hands or other body parts do not get under the
lever assembly of the seat adjustment sys-
tem.
G
WARNING
When you adjust a seat, you or other vehicle
occupants could become trapped, e.g. on the
seat guide rail. There is a risk of injury.
Make sure when adjusting a seat that no one
has any body parts in the sweep of the seat.
Seats
111
Seats, steering wheel and mirrors
Z
!
Make sure that there are no objects in the
footwell under or behind the seats when
moving the seats back. There is a risk that
the seats and/or the objects could be dam-
aged.
i
The head restraints in the front seats are
installed with the NECK-PRO system
(Y page 59). For this reason, it is not pos-
sible to remove the head restraints from
the front seats.
Vehicles without the through-loading fea-
ture: the head restraints cannot be
removed from the rear compartment seats.
For more information, contact a qualified
specialist workshop.
Adjusting the seats
:
Head restraint height
;
Seat cushion angle
=
Seat height
?
Seat fore-and-aft adjustment
A
Backrest angle
i
If PRE-SAFE
®
is activated and the front-
passenger seat is in an unfavorable posi-
tion, it is moved to a better position.
i
You can store the seat settings using the
memory function (Y page 125).
i
Vehicles with the through-loading fea-
ture: if you fold down a rear seat backrest,
the respective front seat is moved forwards
slightly if necessary. This prevents the
seats from colliding.
Adjusting the head restraints
Important safety notes
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
G
WARNING
If head restraints are not installed and adjus-
ted correctly, they cannot provide protection
as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
Do not rotate the head restraints of the front
and rear seats. Otherwise, you cannot adjust
the height and angle of the head restraints to
the correct position.
Using the fore-and-aft adjustment, adjust the
head restraint so that it is as close as possible
to your head.
Observe the important safety notes regarding
the seats (Y page 111).
112
Seats
Seats, steering wheel and mirrors
Adjusting the angle of the head
restraints
Example: Sedan
X
Push or pull the lower edge of the head
restraint in the direction of the arrow.
Adjusting the height of the head
restraints electrically
X
To adjust the head restraint height: slide
switch for head restraint adjustment : up
or down in the direction of the arrow.
Adjusting the luxury head restraints
X
To adjust the side bolsters of the head
restraint: push or pull right and/or left-
hand side bolster : into the desired posi-
tion.
X
To adjust the angle of the head
restraint: push or pull the head restraint in
the direction of arrow ;.
i
Adjust the head restraint so that the back
of your head is as close to the head
restraint as possible.
Rear seat head restraints
Lowering the rear seat head restraints
from the front (Wagon)
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Press button :.
Adjusting the rear seat head restraint
height
Example: Sedan
Seats
113
Seats, steering wheel and mirrors
Z
X
To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
i
If you pull the head restraint forward
slightly, you will require less effort when
making adjustments.
Adjusting the rear seat head restraint
angle
Example: Sedan
X
Pull or push the top of the head restraint
until it is in the desired position.
Removing and installing the rear seat
head restraints
G
WARNING
If head restraints are not installed and adjus-
ted correctly, they cannot provide protection
as intended. There is an increased risk of
injury in the head and neck area, e.g. in the
event of an accident or when braking.
Always drive with the head restraints instal-
led. Before driving off, make sure for every
vehicle occupant that the center of the head
restraint supports the back of the head at
about eye level.
Example: Sedan
The rear head restraints can only be removed
and re-installed on vehicles with the through-
loading facility.
X
Release the rear seat backrest and fold it
slightly forwards (Y page 297).
X
To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X
To re-install: replace the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
X
Fold back the rear seat backrest until it
engages.
Adjusting the active multicontour
seat
The active multicontour seat is only available
for the driver's side.
You can set the active multicontour seat
using COMAND. You can find further infor-
mation in the separate COMAND Operating
Instructions.
114
Seats
Seats, steering wheel and mirrors
Adjusting the 4-way lumbar support
:
To raise the backrest contour
;
To soften the backrest contour
=
To lower the backrest contour
?
To harden the backrest contour
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
Folding bench seat in the cargo com-
partment (Wagon)
Important safety notes
G
WARNING
If the backrests of the rear bench seat are not
locked in the upright position, the backrest
may fold down while driving. In this case, the
seatbelt may not perform its intended protec-
tive function. There is an increased risk of
injury.
Make sure that the backrests of the rear
bench seat are locked in the upright position.
The folding bench seat in the cargo compart-
ment is only suitable for persons no more
than 4.6 ft (1.40 m) tall and weighing a max-
imum of 110 lb (50 kg).
Observe the loading guidelines (Y page 292).
The maximum permissible weight available
for passengers may be reduced by extensive
optional extras and the vehicle load. Observe
the maximum gross vehicle weight and the
gross axle weight rating, which can be found
on the vehicle identification plate
(Y page 410).
The combined cargo cover and net must be
installed if you are using the folding bench
seat (Y page 301).
Folding out the folding bench seat
X
Make sure that the backrests of the rear
bench seat are locked in the upright posi-
tion.
X
Move the handle for the combined cargo
cover and net upwards (Y page 301).
X
Pull release handle : and fold the back-
rest of the folding bench seat upwards.
X
Hook the seat belts into retainers =.
X
Pull release handle ; and fold the folding
bench seat cushion into the sitting posi-
tion.
X
Push down the seat cushion until the back-
rest engages fully.
X
Fold the head restraints upwards.
Seats
115
Seats, steering wheel and mirrors
Z
Installing and removing the seat cush-
ion
You must remove the seat cushion if you wish
to lift the cargo compartment floor, e.g. if the
vehicle has a flat tire.
X
To remove: fold seat cushion ; upwards
and remove it from seat cushion guides :.
X
To install: push seat cushion ; into seat
cushion guides : at a slight angle from the
rear =.
X
Fold seat cushion ; back into its original
position ? until it engages.
Folding back the folding bench seat
X
Pull the seat cushion upwards by tab :
and fold it back into its original position
until it engages.
X
Press release button : and fold the head
restraints down.
!
In order to avoid causing damage, push
the head restraints completely into their
guides and click the seat belt buckles into
their guides.
116
Seats
Seats, steering wheel and mirrors
X
Press release button : and push the head
restraints all the way in.
X
Fold backrest ; of the folding bench seat
into its original position until it engages.
Switching the seat heating on/off
Switching on/off
G
WARNING
Repeatedly switching on the seat heating can
cause the seat cushion and backrest pads to
become very hot. The health of persons with
limited temperature sensitivity or a limited
ability to react to excessively high tempera-
tures may be affected or they may even suffer
burn-like injuries. There is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
Driver's and front-passenger seat
Canada only: rear seat
The three red indicator lamps in the button
indicate the heating level you have selected.
Driver's and front-passenger seat: the sys-
tem automatically switches down from level 3
to level 2 after approximately eight minutes.
Rear seat: the system automatically
switches down from level 3 to level 2 after
approximately five minutes.
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (Y page 157).
X
To switch on: press button : repeatedly
until the desired heating level is set.
X
To switch off: press button : repeatedly
until all the indicator lamps go out.
i
If the battery voltage is too low, the seat
heating may switch off.
Seats
117
Seats, steering wheel and mirrors
Z
Problems with the seat heating
Problem
Possible causes/consequences and MM Solutions
The seat heating has
switched off prema-
turely or cannot be
switched on.
The on-board voltage is too low because too many electrical con-
sumers are switched on.
X
Switch off electrical consumers that you do not need, such as
the rear window defroster or interior lighting.
Once the battery is sufficiently charged, the seat heating will
switch back on automatically.
Switching the seat ventilation on/off
Switching on/off
Driver's and front-passenger seat
The three blue indicator lamps in the buttons
indicate the ventilation level you have selec-
ted.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (Y page 157).
X
To switch on: press button : repeatedly
until the desired ventilation level is set.
X
To switch off: press button : repeatedly
until all the indicator lamps go out.
i
If the battery voltage is too low, the seat
ventilation may switch off.
i
You can open the side windows and the
sliding sunroof using the "Convenience
opening" feature (Y page 100). The seat
ventilation of the driver's seat automati-
cally switches to the highest level.
118
Seats
Seats, steering wheel and mirrors
Problems with the seat ventilation
Problem
Possible causes/consequences and MM Solutions
The seat ventilation has
switched off prema-
turely or cannot be
switched on.
The on-board voltage is too low because too many electrical con-
sumers are switched on.
X
Switch off electrical consumers that you do not need, such as
the rear window defroster or interior lighting.
Once the battery is sufficiently charged, the seat ventilation will
switch back on automatically.
Steering wheel
Important safety notes
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
G
WARNING
Children could injure themselves if they
adjust the steering wheel. There is a risk of
injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The electrically adjustable steering wheel can
still be adjusted when there is no SmartKey in
the ignition lock.
Adjusting the steering wheel
:
To adjust the steering wheel height
;
To adjust the steering wheel position
(fore-and-aft adjustment)
i Further related subjects:
R
EASY-ENTRY/EXIT feature
(Y page 121)
R
Storing settings (Y page 125)
Steering wheel
119
Seats, steering wheel and mirrors
Z
Steering wheel heating
Switching on/off
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To switch on/off: turn the lever in the
direction of arrow : or ;.
Indicator lamp = lights up or goes out.
Vehicles without KEYLESS-GO: when you
remove the SmartKey from the ignition lock,
the steering wheel heating is deactivated.
Vehicles with KEYLESS-GO: when you switch
off the ignition and open the driver's door, the
steering wheel heating is deactivated.
i The steering wheel heating may switch off
temporarily if:
R
the temperature in the vehicle interior is
above 86 (30 †)
R
the temperature of the steering wheel is
above 95 (35 †).
Indicator lamp = remains on.
120
Steering wheel
Seats, steering wheel and mirrors
Problems with the steering wheel heating
Problem
Possible causes/consequences and MM Solutions
The steering wheel
heating has switched
off prematurely or can-
not be switched on.
The on-board voltage is too low because too many electrical con-
sumers are switched on.
X
Switch off electrical consumers that you do not need, such as
the rear window defroster or interior lighting.
Once the battery is sufficiently charged, the steering wheel
heating will switch back on automatically.
EASY-ENTRY/EXIT feature
Important safety notes
G
WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants particularly children could
become trapped. There is a risk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
Move the steering wheel adjustment lever if
there is a risk of entrapment by the steering
wheel. The adjustment process is stopped.
Vehicles with a memory function: if there is a
risk of becoming trapped by the steering
wheel, you can also one of the memory func-
tion position buttons. The adjustment proc-
ess is stopped.
G
WARNING
If children activate the EASY-ENTRY/EXIT fea-
ture, they can become trapped, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
If you drive off while the EASY-ENTRY/EXIT
feature is making adjustments, you could lose
control of the vehicle. There is a risk of an
accident.
Always wait until the adjustment process is
complete before driving off.
The EASY-ENTRY/EXIT feature makes getting
in and out of your vehicle easier.
You can activate and deactivate the EASY-
ENTRY/EXIT feature in the on-board com-
puter (Y page 246).
Position of the steering wheel when the
EASY-ENTRY/EXIT feature is active
The steering wheel swings upwards when
you:
R
remove the SmartKey from the ignition lock
R
with KEYLESS-GO: open the driver's door;
KEYLESS-GO must be in position 1
R
with the SmartKey: open the driver's
door; the SmartKey is in position 0 or 1
must be in the ignition lock (Y page 157).
i
The steering wheel only moves upwards if
it has not already reached the upper stop.
Position of the steering wheel for driv-
ing
The steering wheel is moved to the last selec-
ted position when:
R
the driver's door is closed
R
with KEYLESS-GO: you press the Start/
Stop button once
or
R
with the SmartKey: you insert the Smart-
Key into the ignition lock
Steering wheel
121
Seats, steering wheel and mirrors
Z
When you close the driver's door with the
ignition switched on, the steering wheel is
also automatically moved to the previously
set position.
The last position of the steering wheel is
stored when you switch off the ignition or
when you store the setting with the memory
function (Y page 125).
Crash-responsive EASY-EXIT feature
If the crash-responsive EASY-EXIT feature is
triggered in an accident, the steering column
will move upwards when the driver's door is
opened. This occurs irrespective of the posi-
tion of the SmartKey in the ignition lock. This
makes it easier to exit the vehicle and rescue
the occupants.
The crash-responsive EASY-EXIT feature is
only operational if the EASY-EXIT/ENTRY fea-
ture is activated in the on-board computer
(Y page 246).
Mirrors
Rear-view mirror
X
Anti-glare mode: flick anti-glare lever :
forwards or back.
Exterior mirrors
Adjusting the exterior mirrors
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
G
WARNING
The exterior mirror on the front-passenger
side reduces the size of the image. Visible
objects are actually closer than they appear.
This means that you could misjudge the dis-
tance from road users traveling behind, e.g.
when changing lane. There is a risk of an acci-
dent.
For this reason, always make sure of the
actual distance from the road users traveling
behind by glancing over your shoulder.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (Y page 157).
X
Press button : for the left-hand exterior
mirror or button ; for the right-hand exte-
rior mirror.
The indicator lamp in the corresponding
button lights up in red.
122
Mirrors
Seats, steering wheel and mirrors
The indicator lamp goes out again after
some time. You can adjust the selected
mirror using adjustment button = as long
as the indicator lamp is lit.
X
Press adjustment button = up, down, or to
the left or right until you have adjusted the
exterior mirror to the correct position. You
should have a good overview of traffic con-
ditions.
The convex exterior mirrors provide a larger
field of vision.
After the engine has been started, the exte-
rior mirrors are automatically heated if the
rear window defroster is switched on and the
outside temperature is low. Heating takes a
maximum of ten minutes.
i
You can also heat up the exterior mirrors
manually by switching on the rear window
defroster.
Folding the exterior mirrors in or out
electrically
This function is only available in Canada.
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (Y page 157).
X
Briefly press button :.
Both exterior mirrors fold in or out.
i
Make sure that the exterior mirrors are
always folded out fully while driving. They
could otherwise vibrate.
i
If you are driving faster than 30 mph
(47 km/h), you can no longer fold in the
exterior mirrors.
Setting the exterior mirrors
If the battery has been disconnected or com-
pletely discharged, the exterior mirrors must
be reset. The exterior mirrors will otherwise
not fold in when you select the "Fold in mir-
rors when locking" function in the on-board
computer (Y page 247).
X
Turn the SmartKey to position 1 in the igni-
tion lock (Y page 157).
X
Briefly press button :.
Folding the exterior mirrors in or out
automatically
This function is only available in Canada.
If the "Fold in mirrors when locking" function
is activated in the on-board computer
(Y page 247):
R
the exterior mirrors fold in automatically as
soon as you lock the vehicle from the out-
side.
R
the exterior mirrors fold out again automat-
ically as soon as you unlock the vehicle and
then open the driver's or front-passenger
door.
i
If the exterior mirrors have been folded in
manually, they do not fold out.
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
X
Vehicles without electrically folding
exterior mirrors: move the exterior mirror
into the correct position manually.
X
Vehicles with electrically folding exte-
rior mirrors: press and hold mirror-folding
button until you hear a click and then the
mirrors engage in position (Y page 123).
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
(Y page 122).
Mirrors
123
Seats, steering wheel and mirrors
Z
Automatic anti-glare mirrors
G
WARNING
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks. The electrolyte
is harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
R
Rinse off the electrolyte from your skin
immediately with water.
R
Immediately rinse the electrolyte out of
your eyes thoroughly with clean water.
R
If the electrolyte is swallowed, immediately
rinse your mouth out thoroughly. Do not
induce vomiting.
R
If electrolyte comes into contact with your
skin or hair or is swallowed, seek medical
attention immediately.
R
Immediately change out of clothing which
has come into contact with electrolyte.
R
If an allergic reaction occurs, seek medical
attention immediately.
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if the following conditions are met
simultaneously:
R
the ignition is switched on and
R
incident light from headlamps strikes the
sensor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting and storing the parking position
Using reverse gear
:
Button for the driver's side exterior mirror
;
Button for the front-passenger side exte-
rior mirror
=
Adjustment button
?
Memory button M
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this posi-
tion.
X
Stop the vehicle and turn the SmartKey to
position 2 in the ignition lock
(Y page 157).
X
Press button ; for the exterior mirror on
the front-passenger side.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use adjustment button = to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
124
Mirrors
Seats, steering wheel and mirrors
Using the memory button
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
With the exterior mirror on the front-
passenger side activated, use adjustment
button = to adjust the exterior mirror. In
the exterior mirror, the rear wheel and the
curb should be visible.
X
Press memory button M ? and one of the
arrows on adjustment button = within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
these steps.
Calling up a stored parking position set-
ting
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Adjust the exterior mirror on the front-
passenger side using button ;.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
if you press button : for the exterior mir-
ror on the driver's side
Memory function
Storing settings
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants particularly children could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
The memory function can be used at any time,
e.g. even when the SmartKey isn't in the igni-
tion lock.
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
active multicontour seat: seat contour,
dynamic function level
R
driver's side: position of the exterior mir-
rors on the driver's and front-passenger
sides
Memory function
125
Seats, steering wheel and mirrors
Z
X
Adjust the seat (Y page 112).
X
On the driver's side, adjust the steering
wheel (Y page 119)and the exterior mirrors
(Y page 122).
X
Press memory button M and one of the
storage position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected pre-
set position. A tone sounds when the set-
tings have been completed.
Calling up a stored setting
X
Press and hold the relevant storage posi-
tion button 1, 2 or 3, until the seat, steering
wheel and exterior mirrors are in the stored
position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
126
Memory function
Seats, steering wheel and mirrors
Useful information ............................ 128
Exterior lighting ................................ 128
Interior lighting ................................. 133
Replacing bulbs ................................. 134
Windshield wipers ............................ 136
127
Lights and windshield wipers
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Exterior lighting
General notes
For reasons of safety, Mercedes-Benz recom-
mends that you drive with the lights switched
on even during the daytime. Therefore, your
vehicle is equipped with special daytime run-
ning lamps. In some countries, operation of
the headlamps varies due to legal require-
ments and self-imposed obligations.
If you wish to drive during the daytime without
lights, switch off the daytime running lamps
function in the on-board computer
(Y page 244).
Driving abroad
Symmetrical low-beam headlamps
Switch the headlamps to symmetrical low
beam in countries in which traffic drives on
the opposite side of the road from the country
where the vehicle is registered. This prevents
glare to oncoming traffic. When using sym-
metrical lights, the edge of the road is not lit
as widely and as far ahead as normal.
Have the headlamps converted at a qualified
specialist workshop as close to the border as
possible before driving in these countries.
Asymmetrical low beam
Have the headlamps converted back to asym-
metrical low-beam headlamps at a qualified
specialist workshop as soon as possible after
crossing the border again.
Setting the exterior lighting
Setting options
Exterior lighting can be set using:
R
the light switch
R
the combination switch (Y page 130)
R
the on-board computer (Y page 244)
Light switch
Operation
1 W
Left-hand standing lamps
2 X
Right-hand standing lamps
3 T
Parking lamps, license plate and
instrument cluster lighting
4 Ã
Automatic headlamp mode, control-
led by the light sensor
5 L
Low-beam/high-beam headlamps
B R
Rear fog lamp
If you hear a warning tone when you leave the
vehicle, the lights may still be switched on.
X
Turn the light switch to Ã.
128
Exterior lighting
Lights and windshield wipers
The exterior lighting (except the parking/
standing lamps) switches off automatically if
you:
R
remove the SmartKey from the ignition lock
R
open the driver's door with the SmartKey in
position 0
Automatic headlamp mode
G
WARNING
When the light switch is set to Ã, the low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There is a risk of an
accident.
In such situations, turn the light switch to
L.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times.
à is the favored light switch setting. The
light setting is automatically selected accord-
ing to the brightness of the ambient light
(exception: poor visibility due to weather con-
ditions such as fog, snow or spray):
R
SmartKey in position 1 in the ignition lock:
the parking lamps are switched on or off
automatically depending on the brightness
of the ambient light.
R
With the engine running: if you have acti-
vated the "daytime running lamps" function
via the on-board computer, the daytime
running lamps or the parking lamps and the
low-beam headlamps are switched on or off
automatically depending on the brightness
of the ambient light.
X
To switch on automatic headlamp
mode: turn the light switch to Ã.
Canada only:
The daytime running lamps improve the visi-
bility of your vehicle during the day. The day-
time running lamps function is required by law
in Canada. It cannot therefore be deactivated.
When the engine is running and the vehicle is
stationary: if you move the selector lever from
a drive position to P, the daytime running
lamps/low-beam headlamps go out after
three minutes.
When the engine is running, the vehicle is
stationary and in bright ambient light: if you
turn the light switch to T, the daytime
running lamps and parking lamps switch on.
If the engine is running and you turn the light
switch to L, the manual settings take
precedence over the daytime running lamps.
USA only:
The daytime running lamps improve the visi-
bility of your vehicle during the day. To do this,
the daytime running lamps function must be
switched on using the on-board computer
(Y page 244).
If the engine is running and you turn the light
switch to T or L, the manual settings
take precedence over the daytime running
lamps.
Low-beam headlamps
G
WARNING
When the light switch is set to Ã, the low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There is a risk of an
accident.
In such situations, turn the light switch to
L.
Even if the light sensor does not detect that it
is dark, the parking lamps and low-beam
headlamps switch on when the ignition is
switched on and the light switch is set to the
L position. This is a particularly useful
function in the event of rain and fog.
X
To switch on the low-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L.
The green L indicator lamp in the instru-
ment cluster lights up.
Exterior lighting
129
Lights and windshield wipers
Z
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of
thick fog. Please take note of the country-
specific regulations for the use of rear fog
lamps.
X
To switch on the rear fog lamps: turn the
SmartKey in the ignition lock to position 2
or start the engine.
X
Turn the light switch to L or Ã.
X
Press the R button.
The yellow R indicator lamp in the
instrument cluster lights up.
X
To switch off the rear fog lamp: press the
R button.
The yellow R indicator lamp in the
instrument cluster goes out.
Parking lamps
!
If the battery has been excessively dis-
charged, the parking lamps or standing
lamps are automatically switched off to
enable the next engine start. Always park
your vehicle safely and sufficiently lit
according to legal standards. Avoid the
continuous use of the T parking lamps
for several hours. If possible, switch on the
X right or the W left standing lamp.
X
To switch on: turn the light switch to T.
The green T indicator lamp in the instru-
ment cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illumina-
ted.
X
To switch on the standing lamps: the
SmartKey is not in the ignition lock or it is in
position 0.
X
Turn the light switch to W (left-hand side
of the vehicle) or X (right-hand side of
the vehicle).
Combination switch
Turn signal
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are only switched on when it is dark
and the engine is running.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
X
To switch off the high-beam head-
lamps: move the combination switch back
to its normal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
130
Exterior lighting
Lights and windshield wipers
i
Vehicles with Adaptive Highbeam Assist:
when Adaptive Highbeam Assist is active, it
controls activation of the high-beam head-
lamps (Y page 132).
High-beam flasher
X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2, or start the
engine.
X
Pull the combination switch in the direction
of arrow =.
Hazard warning lamps
X
To switch on the hazard warning lamps:
press button :.
All turn signals flash. If you now switch on a
turn signal using the combination switch,
only the turn signal lamp on the corre-
sponding side of the vehicle will flash.
X
To switch off the hazard warning lamps:
press button :.
The hazard warning lamps automatically
switch on if:
R
an air bag is deployed or
R
the vehicle decelerates rapidly from a
speed of above 45 mph (70 km/h) and
comes to a standstill
The hazard warning lamps switch off auto-
matically if the vehicle reaches a speed of
above 6 mph (10 km/h) again after a full
brake application.
i
The hazard warning lamps still operate if
the ignition is switched off.
Cornering light function
The cornering light function improves the illu-
mination of the road over a wide angle in the
direction you are turning, enabling better vis-
ibility in tight bends, for example. It can only
be activated when the low-beam headlamps
are switched on.
Active:
R
if you are driving at speeds below 25 mph
(40 km/h) and switch on the turn signal or
turn the steering wheel
R
if you are driving at speeds between
25 mph (40 km/h) and 45 mph (70 km/h)
and turn the steering wheel
The cornering lamp may remain lit for a short
time, but is automatically switched off after
no more than three minutes.
Exterior lighting
131
Lights and windshield wipers
Z
Adaptive Highbeam Assist
General notes
You can use this function to set the head-
lamps to change between low beam and high
beam automatically. The system recognizes
vehicles with their lights on, either approach-
ing from the opposite direction or traveling in
front of your vehicle, and consequently
switches the headlamps from high beam to
low beam.
The system automatically adapts the low-
beam headlamp range depending on the dis-
tance to the other vehicle. Once the system
no longer detects any other vehicles, it reac-
tivates the high-beam headlamps.
The system's optical sensor is located behind
the windshield near the overhead control
panel.
Important safety notes
G
WARNING
Adaptive Highbeam Assist does not recognize
road users:
R
who have no lights, e.g. pedestrians
R
who have poor lighting, e.g. cyclists
R
whose lighting is blocked, e.g. by a barrier
In very rare cases, Adaptive Highbeam Assist
may fail to recognize other road users that
have lights, or may recognize them too late. In
this or similar situations, the automatic high-
beam headlamps will not be deactivated or
activated regardless. There is a risk of an acci-
dent.
Always carefully observe the traffic conditions
and switch off the high-beam headlamps in
good time.
Adaptive Highbeam Assist cannot take into
account road, weather or traffic conditions.
Adaptive Highbeam Assist is only an aid. You
are responsible for adjusting the vehicle's
lighting to the prevailing light, visibility and
traffic conditions.
In particular, the detection of obstacles can
be restricted if there is:
R
poor visibility, e.g. due to fog, heavy rain or
snow
R
dirt on the sensors or the sensors are
obscured
132
Exterior lighting
Lights and windshield wipers
Switching Adaptive Highbeam Assist
on/off
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To switch on: turn the light switch to Ã.
X
Press the combination switch beyond the
pressure point in the direction of arrow :.
The _ indicator lamp in the multifunc-
tion display lights up when it is dark and the
light sensor activates the low-beam head-
lamps.
If you are driving at speeds above approx-
imately 16 mph (25 km/h):
The headlamp range is set automatically
depending on the distance between the
vehicle and other road users.
If you are driving at speeds above approx-
imately 19 mph (30 km/h) and no other
road users have been detected:
The high-beam headlamps are switched on
automatically. The K indicator lamp in
the instrument cluster also lights up.
If you are driving at speeds below approx-
imately 16 mph (25 km/h) or other road
users have been detected or the roads are
adequately lit:
The high-beam headlamps are switched off
automatically. The K indicator lamp in
the instrument cluster goes out. The _
indicator lamp in the multifunction display
remains lit.
X
To switch off: move the combination
switch back to its normal position or move
the light switch to another position.
The _ indicator lamp in the instrument
cluster goes out.
Headlamps fogged up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of
the headlamp.
Interior lighting
Overview of interior lighting
Front overhead control panel
:
u To switch the rear interior lighting
on/off
;
| To switch the automatic interior
lighting control on/off
=
p To switch the right-hand front read-
ing lamp on/off
?
c To switch the front interior lighting
on/off
A
p To switch the left-hand front reading
lamp on/off
Interior lighting
133
Lights and windshield wipers
Z
Rear-compartment overhead control panel
:
p To switch the right-hand reading
lamp on/off
;
p To switch the left-hand reading lamp
on/off
Interior lighting control
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
unless the SmartKey is in position 2 in the
ignition lock.
The color and brightness of the ambient light-
ing may be set using the on-board computer
(Y page 244).
Automatic interior lighting control
X
To activate/deactivate: press the |
button.
When the automatic interior lighting con-
trol is activated, the button is flush with the
overhead control panel.
The interior lighting automatically switches
on if you:
R
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition lock
The interior light is activated for a short while
when the SmartKey is removed from the igni-
tion lock. You can activate this delayed
switch-off using the on-board computer
(Y page 245).
Manual interior lighting control
X
To switch the front interior lighting on/
off: press the c button.
X
To switch the rear interior lighting on/
off: press the u button.
X
To switch the reading lamps on/off:
press the p button.
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
X
To switch off the crash-responsive
emergency lighting: press the hazard
warning lamp button.
or
X
Lock and then unlock the vehicle using the
SmartKey.
Replacing bulbs
Important safety notes
G
WARNING
Bulbs, lamps and connectors can get very hot
when operating. If you change a bulb, you
could burn yourself on these components.
There is a risk of injury.
Allow these components to cool down before
changing a bulb.
Vehicles with static LED headlamps:
Do not use a bulb that has been dropped or if
its glass tube has been scratched.
The bulb may explode if:
R
you touch it
R
it is hot
R
you drop it
R
you scratch it
134
Replacing bulbs
Lights and windshield wipers
Only operate bulbs in enclosed lamps
designed for that purpose. Only install spare
bulbs of the same type and the specified volt-
age.
Marks on the glass tube reduce the service
life of the bulbs. Do not touch the glass tube
with your bare hands. If necessary, clean the
glass tube when cold with alcohol or spirit and
rub it off with a lint-free cloth.
Protect bulbs from moisture during opera-
tion. Do not allow bulbs to come into contact
with liquids.
Replace only the bulbs listed (Y page 135).
Have the bulbs that you cannot replace your-
self changed at a qualified specialist work-
shop.
If you require assistance changing bulbs, con-
sult a qualified specialist workshop.
If the new bulb still does not light up, consult
a qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times.
Have the headlamp setting checked regularly.
Vehicles with static LED headlamps
The front and rear light clusters of your vehi-
cle are equipped with LED light bulbs. Do not
replace the bulbs yourself. Contact a qualified
specialist workshop which has the necessary
specialist knowledge and tools to carry out
the work required.
Lamps are an important aspect of vehicle
safety. You must therefore make sure that
these function correctly at all times. Have the
headlamp setting checked regularly.
Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb
type can be found in the legend.
Static LED headlamps
:
High-beam headlamp: H7 55 W
;
Turn signal lamp: PSY 24 W
Changing the front bulbs
High-beam headlamps (static LED head-
lamps)
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Using the handle extension, turn bulb
holder ; counter-clockwise and pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Replacing bulbs
135
Lights and windshield wipers
Z
Turn signal (static LED headlamps)
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Turn bulb holder ; counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Windshield wipers
Switching the windshield wipers
on/off
!
Do not operate the windshield wipers
when the windshield is dry, as this could
damage the wiper blades. Moreover, dust
that has collected on the windshield can
scratch the glass if wiping takes place when
the windshield is dry.
If it is necessary to switch on the windshield
wipers in dry weather conditions, always
use washer fluid when operating the wind-
shield wipers.
!
If the windshield wipers leave smears on
the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Clean the windshield using washer fluid
after washing the vehicle in an automatic
car wash.
!
Intermittent wiping with rain sensor: due
to optical influences and the windshield
becoming dirty in dry weather conditions,
the windshield wipers may be activated
inadvertently. This could then damage the
windshield wiper blades or scratch the
windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.
1
$ Windshield wiper off
2
Ä Intermittent wipe, low (rain sensor
set to low sensitivity)
3
Å Intermittent wipe, high (rain sensor
set to high sensitivity)
4
° Continuous wipe, slow
5
¯ Continuous wipe, fast
B
í Single wipe/î To wipe the wind-
shield using washer fluid
X
Switch on the ignition.
X
Turn the combination switch to the corre-
sponding position.
In the Ä or Å position, the appropriate
wiping frequency is set automatically accord-
ing to the intensity of the rain. In the Å
position, the rain sensor is more sensitive
than in the Ä position, causing the wind-
shield wipers to wipe more frequently.
If the wiper blades are worn, the windshield
will no longer be wiped properly. This could
prevent you from observing the traffic condi-
tions.
136
Windshield wipers
Lights and windshield wipers
Switching the rear window wiper on/
off
:
è Switch
2
ô To wipe with washer fluid
3
I To switch on intermittent wiping
4
0 To switch off intermittent wiping
5
ô To wipe with washer fluid
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Turn switch : on the combination switch
to the corresponding position.
When the rear window wiper is switched on,
a symbol appears in the assistance graphic
in the instrument cluster.
Replacing the wiper blades
Important safety notes
G
WARNING
If the windshield wipers begin to move while
you are changing the wiper blades, you could
be trapped by the wiper arm. There is a risk of
injury.
Always switch off the windshield wipers and
ignition before changing the wiper blades.
!
To avoid damaging the wiper blades,
make sure that you touch only the wiper
arm of the wiper.
!
Never open the hood/tailgate if a wiper
arm has been folded away from the wind-
shield/rear window.
Never fold a windshield wiper arm without a
wiper blade back onto the windshield/rear
window.
Hold the windshield wiper arm firmly when
you change the wiper blade. If you release
the wiper arm without a wiper blade and it
falls onto the windshield/rear window, the
windshield/rear window may be damaged
by the force of the impact.
Mercedes-Benz recommends that you have
the wiper blades changed at a qualified
specialist workshop.
Replacing the wiper blades
Removing the wiper blades
X
Remove the SmartKey from the ignition
lock or turn it to position 0 (KEYLESS-GO).
X
Fold the wiper arm away from the wind-
shield.
X
Firmly press release knob : and pull wiper
blade ; upwards from the wiper arm in the
direction of the arrow.
Installing the wiper blades
Windshield wipers
137
Lights and windshield wipers
Z
X
Position new wiper blade : in the retainer
on the wiper arm and slide it into place in
the direction of the arrow.
The wiper blade audibly engages.
X
Make sure that the wiper blade is seated
correctly.
X
Fold the wiper arm back onto the wind-
shield.
Replacing the rear window wiper blade
Removing a wiper blade
X
Remove the SmartKey from the ignition
lock.
X
Fold wiper arm : away from the rear win-
dow.
X
Position wiper blade ; at a right angle to
wiper arm :.
X
Hold wiper arm : and press wiper
blade ; in the direction of the arrow until
it releases.
X
Remove wiper blade ;.
Installing a wiper blade
X
Place new wiper blade ; onto wiper
arm :.
X
Hold wiper arm : and press wiper
blade ; in the opposite direction to the
arrow until it engages.
X
Make sure that wiper blade ; is seated
correctly.
X
Position wiper blade ; parallel to wiper
arm :.
X
Fold wiper arm : back onto the rear win-
dow.
138
Windshield wipers
Lights and windshield wipers
Problems with the windshield wipers
Problem
Possible causes/consequences and MM Solutions
The windshield wipers
are jammed.
Leaves or snow, for example, may be obstructing the windshield
wiper movement. The wiper motor has been deactivated.
X
For safety reasons, you should remove the SmartKey from the
ignition lock.
or
X
Switch off the engine using the Start/Stop button and open the
driver's door.
X
Remove the cause of the obstruction.
X
Switch the windshield wipers back on.
The windshield wipers
fail completely.
The windshield wiper drive is malfunctioning.
X
Select another wiper speed on the combination switch.
X
Have the windshield wipers checked at a qualified specialist
workshop.
Windshield wipers
139
Lights and windshield wipers
Z
140
Useful information ............................ 142
Overview of climate control sys-
tems ................................................... 142
Operating the climate control sys-
tems ................................................... 146
Setting the air vents ......................... 153
141
Climate control
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Overview of climate control systems
Important safety notes
Observe the settings recommended on the
following pages. The windows could other-
wise fog up.
To prevent the windows from fogging up:
R
switch off climate control only briefly
R
switch on air-recirculation mode only
briefly
R
switch on the cooling with air dehumidifi-
cation function
R
switch on the defrost windshield function
briefly, if required
Climate control regulates the temperature
and the humidity in the vehicle interior and
filters undesirable substances out of the air.
Climate control can only be operated when
the engine is running. Optimum operation is
only achieved with the side windows and roof
closed.
The residual heat function can only be acti-
vated or deactivated with the ignition
switched off (Y page 152).
i
Ventilate the vehicle for a brief period
during warm weather, e.g. using the con-
venience opening feature (Y page 100).
This will speed up the cooling process and
the desired vehicle interior temperature
will be reached more quickly.
i
The integrated filter filters out most par-
ticles of dust and soot and completely fil-
ters out pollen. It also reduces gaseous pol-
lutants and odors. A clogged filter reduces
the amount of air supplied to the vehicle
interior. For this reason, you should always
observe the interval for replacing the filter,
which is specified in the Maintenance
Booklet. As it depends on environmental
conditions, e.g. heavy air pollution, the
interval may be shorter than stated in the
Maintenance Booklet.
i
It is possible that the residual heat func-
tion may be activated automatically an hour
after the SmartKey is removed. The vehicle
is then ventilated for 30 minutes to dry the
automatic climate control.
142
Overview of climate control systems
Climate control
Control panel for dual-zone automatic climate control
Canada only
:
Activates/deactivates air-recirculation mode (Y page 152)
;
Defrosts the windshield (Y page 150)
=
Switches the ZONE function on/off (Y page 150)
?
Display
A
Sets climate control to automatic (Y page 148)
B
Switches cooling with air dehumidification on/off (Y page 147)
C
Switches the rear window defroster on/off (Y page 151)
D
Switches climate control on/off (Y page 146)
E
Sets the temperature, right (Y page 149)
F
Sets the air distribution (Y page 149)
G
Sets the airflow (Y page 150)
H
Sets the temperature, left (Y page 149)
USA only
:
Sets climate control to automatic (Y page 148)
;
Defrosts the windshield (Y page 150)
=
Switches the ZONE function on/off (Y page 150)
?
Activates/deactivates air-recirculation mode (Y page 152)
A
Switches maximum cooling on/off (Y page 151)
B
Switches cooling with air dehumidification on/off (Y page 147)
C
Switches the rear window defroster on/off (Y page 151)
Overview of climate control systems
143
Climate control
D
Switches climate control on/off (Y page 146)
E
Sets the temperature, right (Y page 149)
F
Sets the air distribution (Y page 149)
G
Sets the airflow (Y page 150)
H
Sets the temperature, left (Y page 149)
I
Display
Optimum use of dual-zone climate
control
Climate control system
The following contains notes and recommen-
dations on optimum use of dual-zone climate
control.
R
Activate climate control using the à and
¿ buttons. The indicator lamps above
the à and ¿ buttons light up.
R
Set the temperature to 72 (22 †).
R
Only use the "Windshield defrosting" func-
tion briefly until the windshield is clear
again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odors or
when in a tunnel. The windows could oth-
erwise fog up, since no fresh air is drawn
into the vehicle in air-recirculation mode.
R
Use the ZONE function to adopt the tem-
perature settings on the driver's side for
the front-passenger side as well. The indi-
cator lamp above the á button goes
out.
R
Vehicles with COMAND: if you change the
settings of the climate control system, the
climate status display appears for approx-
imately three seconds at the bottom of the
screen in the COMAND display. See also
the separate COMAND operating instruc-
tions. You will see the current settings of
the various climate control functions.
ECO start/stop function
During automatic engine switch-off, the cli-
mate control system only operates at a
reduced capacity. If you require the full cli-
mate control output, you can switch off the
ECO start/stop function by pressing the ECO
button (Y page 162).
144
Overview of climate control systems
Climate control
Control panel for 3-zone automatic climate control
Canada only
Front control panel
:
Sets climate control to automatic (Y page 148)
;
Defrosts the windshield (Y page 150)
=
Switches the ZONE function on/off (Y page 150)
?
Display
A
Activates/deactivates air-recirculation mode (Y page 152)
B
Switches the residual heat function on/off (Y page 152)
C
Switches cooling with air dehumidification on/off (Y page 147)
D
Switches the rear window defroster on/off (Y page 151)
E
Switches climate control on/off (Y page 146)
F
Sets the temperature, right (Y page 149)
G
Adjusts the climate mode settings (Y page 148)
H
Sets the airflow (Y page 150)
I
Sets the air distribution (Y page 149)
J
Sets the temperature, left (Y page 149)
Rear control panel
K
Increases the temperature (Y page 149)
L
Display
M
Increases the airflow (Y page 150)
N
Reduces the airflow (Y page 150)
O
Reduces the temperature (Y page 149)
Overview of climate control systems
145
Climate control
Optimum use of 3-zone automatic cli-
mate control
Climate control system
The 3-zone automatic climate control is only
available on vehicles for Canada.
The following contains instructions and rec-
ommendations to enable you to get the most
out of your 3-zone automatic climate control.
R
Activate climate control using the à and
¿ buttons. The indicator lamps above
the à and ¿ buttons light up.
R
In automatic mode, you can also set the
climate mode (FOCUS/MEDIUM/
DIFFUSE). The MEDIUM level is recommen-
ded.
R
Set the temperature to 72 (22 †).
R
Only use the "Windshield defrosting" func-
tion briefly until the windshield is clear
again.
R
Only use air-recirculation mode briefly, e.g.
if there are unpleasant outside odors or
when in a tunnel. The windows could oth-
erwise fog up, since no fresh air is drawn
into the vehicle in air-recirculation mode.
R
Use the ZONE function to adopt the tem-
perature settings on the driver's side for
the front-passenger side and the rear com-
partment as well. The indicator lamp above
the á button goes out.
R
Use the residual heat function if you want to
heat or ventilate the vehicle interior when
the ignition is switched off. The residual
heat function can only be activated or deac-
tivated with the ignition switched off.
R
Vehicles with COMAND: if you change the
settings of the climate control system, the
climate status display appears for approx-
imately three seconds at the bottom of the
screen in the COMAND display. See also
the separate COMAND operating instruc-
tions. You will see the current settings of
the various climate control functions.
ECO start/stop function
During automatic engine switch-off, the cli-
mate control system only operates at a
reduced capacity. If you require the full cli-
mate control output, you can switch off the
ECO start/stop function by pressing the ECO
button (Y page 162).
Operating the climate control sys-
tems
Switching climate control on/off
General notes
When the climate control is switched off, the
air supply and air circulation are also
switched off. The windows could fog up.
Therefore, switch off climate control only
briefly
i
Activate climate control primarily using
the à button (Y page 148).
Activating/deactivating
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To switch on: press the à button on
the control panel for the climate control.
The indicator lamp above the à button
lights up. Airflow and air distribution are set
to automatic mode.
or
X
Press the ^ button.
The indicator lamp above the ^ button
goes out. The previously selected settings
are restored.
X
To switch off: press the ^ button.
The indicator lamp above the ^ button
lights up.
146
Operating the climate control systems
Climate control
Activating/deactivating cooling with
air dehumidification
General notes
If you deactivate the "Cooling with air-dehu-
midification" function, the air inside the vehi-
cle will not be cooled. The air inside the vehi-
cle will also not be dehumidified. The win-
dows can fog up more quickly. Therefore,
deactivate the cooling with air-dehumidifica-
tion function only briefly.
The "Cooling with air dehumidification" func-
tion is only available when the engine is run-
ning. The air inside the vehicle is cooled and
dehumidified according to the temperature
selected.
Condensation may drip from the underside of
the vehicle when it is in cooling mode. This is
normal and not a sign that there is a malfunc-
tion.
Switching on/off
X
To activate: press the ¿ button.
The indicator lamp above the ¿ button
lights up.
X
To deactivate: press the ¿ button.
The indicator lamp above the ¿ button
goes out. The "Cooling with air dehumidifi-
cation" function has a delayed switch-off
feature.
Operating the climate control systems
147
Climate control
Problems with the "Cooling with air dehumidification" function
Problem
Possible causes/consequences and MM Solutions
The indicator lamp in
the ¿ button
flashes three times or
remains off. The "Cool-
ing with air dehumidifi-
cation" function cannot
be switched on.
Cooling with air dehumidification has been deactivated due to a
malfunction.
X
Visit a qualified specialist workshop.
Setting climate control to automatic
General notes
In automatic mode, the set temperature is
maintained automatically at a constant level.
The system automatically regulates the tem-
perature of the dispensed air, the airflow and
the air distribution.
The automatic mode functions optimally
when the "Cooling with air dehumidification"
function is activated. If necessary, cooling
with air dehumidification can be deactivated.
If you deactivate the "Cooling with air-dehu-
midification" function, the air inside the vehi-
cle will not be cooled. The air inside the vehi-
cle will also not be dehumidified. The win-
dows can fog up more quickly. Therefore,
deactivate the cooling with air-dehumidifica-
tion function only briefly.
Activating/switching
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Set the desired temperature.
X
To activate: press the à button.
The indicator lamp above the à button
lights up. Automatic air distribution and air-
flow are activated.
i
3-zone automatic climate control: when
automatic mode is activated, you can set
the climate mode (Y page 148).
X
To switch to manual mode:
Dual-zone automatic climate control: press
air distribution adjustment button F
(Y page 143).
3-zone automatic climate control: press air
distribution adjustment button I
(Y page 145).
The indicator lamp above the à button
goes out.
or
X
Dual-zone automatic climate control: press
airflow adjustment button G (Y page 143).
3-zone automatic climate control: press
airflow adjustment button H (Y page 145).
The indicator lamp above the à button
goes out.
Adjusting the climate mode settings
The "Set climate mode" function is only avail-
able on vehicles for Canada with 3-zone auto-
matic climate control.
You can select the following climate mode
settings in automatic mode:
FOCUS high airflow that is set slightly
cooler
MEDIUM medium airflow, standard setting
DIFFUSE low airflow that is set slightly
warmer and with less draft
148
Operating the climate control systems
Climate control
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Press the à button.
X
Press climate mode selection button G up
or down and select the desired level
(Y page 145).
Setting the temperature
Dual-zone automatic climate control
Different temperatures can be set for the
driver's and front-passenger sides.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To increase/reduce: press temperature
selection switch E or H up or down
(Y page 143).
Only change the temperature setting in
small increments. Start at 72 (22 †).
3-zone automatic climate control
3-zone automatic climate control zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To increase/reduce the temperature in
the front compartment: press tempera-
ture selection switch F or J up or down
(Y page 145).
Only change the temperature setting in
small increments. Start at 72 (22 †).
X
To increase/reduce the temperature in
the rear compartment using the front
control panel: press the á button.
The indicator lamp above the á button
goes out.
X
Press temperature selection switch F or
J up or down (Y page 145).
Only change the temperature setting in
small increments. Start at 72 (22 †).
X
To increase/reduce the temperature in
the rear compartment using the rear
control panel: press the r or s
button on the rear control panel.
Only change the temperature setting in
small increments. Start at 72 (22 †).
Setting the air distribution
Air distribution settings
P
Directs air through the center and side
air vents
O
Directs air through the footwell air
vents
S
Directs the airflow through the center,
side and footwell air vents (USA only)
¯
Directs air through the defroster vents
b
Directs the airflow through the
defroster, center and side air vents
(Canada only)
a
Directs air through the defroster and
footwell vents
i
Regardless of the air distribution setting,
airflow is always directed through the side
air vents. The side air vents can only be
closed when the controls on the side air
vents are turned downwards.
Operating the climate control systems
149
Climate control
Setting the air distribution
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Dual-zone automatic climate control: press
air distribution adjustment button F up or
down, until the desired symbol appears in
the display (Y page 143).
X
3-zone automatic climate control: press air
distribution adjustment button I up or
down, until the desired symbol appears in
the display (Y page 145).
Setting the airflow
Dual-zone climate control
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To increase/reduce: press airflow switch
G up or down (Y page 143).
3-zone automatic climate control
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To increase/reduce front-compart-
ment airflow: press airflow switch H up or
down (Y page 145).
X
To increase/reduce the rear-compart-
ment airflow: press the K or I
switch.
If the battery is not sufficiently charged,
blower output may be reduced. As soon as
the battery is sufficiently charged, full blower
output will be available.
Switching the ZONE function on/off
X
To activate: press the á button.
The indicator lamp above the á button
lights up.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is not
adopted for the front-passenger side and
the rear compartment.
X
To deactivate: press the á button.
The indicator lamp above the á button
goes out.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is
adopted for the front-passenger side and
the rear compartment.
Defrosting the windshield
You can use this function to defrost the wind-
shield or to defrost the inside of the wind-
shield and the side windows.
Switch off the "Windshield defrosting" func-
tion as soon as the windshield is clear again.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To activate: press the ¬ button.
The indicator lamp above the ¬ button
lights up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
If the battery is not sufficiently charged,
blower output may be reduced. Once the bat-
tery is sufficiently charged again, full blower
output will be available again.
X
To deactivate: press the ¬ button.
The indicator lamp above the ¬ button
goes out. The previously selected settings
are restored. Air-recirculation mode
remains deactivated.
or
150
Operating the climate control systems
Climate control
X
Press the à button.
The indicator lamp above the ¬ button
goes out. Airflow and air distribution are set
to automatic mode.
or
X
Dual-zone automatic climate control: press
temperature selection switch E or H up
or down (Y page 143).
3-zone automatic climate control: press
temperature selection switch F or J up
or down (Y page 145).
or
X
Dual-zone automatic climate control: press
airflow switch G up or down (Y page 143).
3-zone automatic climate control: press
airflow switch H up or down (Y page 145).
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
MAX COOL is only operational when the
engine is running.
X
To activate: press the Ù button.
The indicator lamp in the button lights up.
X
To activate: press off-road button Ù
again.
The indicator lamp goes out. The previously
selected settings are restored.
When you activate MAX COOL, climate con-
trol switches to the following functions:
R
maximum cooling
R
maximum airflow
R
air-recirculation mode on
Defrosting the windows
Windows fogged up on the inside
X
Activate the ¿ cooling with air dehu-
midification function.
X
Activate automatic mode Ã.
X
Adjust the side air vents so that the warmed
air is directed to the side windows.
X
If the windows continue to fog up, activate
the ¬ "Windshield defrosting" function.
i
You should only select this setting until
the windshield is clear again.
Windows fogged up on the outside
X
Dual-zone automatic climate control: press
air distribution adjustment button F up or
down (Y page 143), until the P or O
symbol appears in the display.
X
3-zone automatic climate control: press air
distribution adjustment button I up or
down (Y page 145), until the P or O
symbol appears in the display.
X
Adjust the side air vents so that no air is
directed to the side windows.
Rear window defroster
General notes
The rear window defroster has a high current
draw. You should therefore switch it off as
soon as the rear window is clear. Otherwise,
the rear window defroster switches off auto-
matically after several minutes.
If the battery voltage is too low, the rear win-
dow defroster may switch off.
Activating/deactivating
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Press the ¤ button.
The indicator lamp above the ¤ button
lights up or goes out.
Operating the climate control systems
151
Climate control
Problems with the rear window defroster
Problem
Possible causes/consequences and MM Solutions
The rear window
defroster has deactiva-
ted prematurely or can-
not be activated.
The battery has not been sufficiently charged.
X
Switch off any consumers that are not required, e.g. reading
lamps, interior lighting or the seat heating.
When the battery is sufficiently charged, the rear window
defroster can be activated again.
Activating/deactivating air-recircula-
tion mode
General notes
You can deactivate the flow of fresh air if
unpleasant odors are entering the vehicle
from outside. The air already inside the vehi-
cle will then be recirculated.
If you switch on air-recirculation mode, the
windows can fog up more quickly, in particu-
lar at low temperatures. Only use air-recircu-
lation mode briefly to prevent the windows
from fogging up.
Switching on/off
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To activate: press the g button.
The indicator lamp above the g button
lights up.
i
Dual-zone automatic climate control: air-
recirculation mode is automatically activa-
ted at high outside temperatures.
3-zone automatic climate control: air-recir-
culation mode is automatically activated at
high levels of pollution or at high outside
temperatures.
When air-recirculation mode is activated
automatically, the indicator lamp above the
g button does not light up. Outside air is
added after about 30 minutes.
X
To deactivate: press the g button.
The indicator lamp above the g button
goes out.
i Air-recirculation mode deactivates auto-
matically:
R
after approximately five minutes at out-
side temperatures below approximately
41 (5 †)
R
after approximately five minutes if cool-
ing with air dehumidification is deactiva-
ted
R
after approximately 30 minutes at out-
side temperatures above approximately
41 (5 †) if the "Cooling with air dehu-
midification" function is activated
Activating/deactivating the residual
heat function
General notes
The residual heat function is only available in
vehicles for Canada with 3-zone automatic
climate control.
It is possible to make use of the residual heat
of the engine to continue heating the vehicle
for approximately 30 minutes after the engine
has been switched off. The heating time
depends on the set interior temperature.
Switching on/off
X
Turn the SmartKey to position 0 in the igni-
tion lock or remove it (Y page 157).
X
To activate: press the Ì button.
The indicator lamp above the Ì button
lights up.
152
Operating the climate control systems
Climate control
i
If the residual heat function is activated,
the windows may fog up on the inside.
i
The blower will run at a low speed regard-
less of the airflow setting.
i
If you activate the residual heat function
at high temperatures, only the ventilation
will be activated. The blower runs at
medium speed.
X
To deactivate: press the Ì button.
The indicator lamp above the Ì button
goes out.
Residual heat is deactivated automatically:
R
after approximately 30 minutes
R
when the ignition is switched on
R
if the battery voltage drops
Setting the air vents
Important safety notes
G
WARNING
Very hot or very cold air can flow from the air
vents. This could result in burns or frostbite in
the immediate vicinity of the air vents. There
is a risk of injury.
Make sure that all vehicle occupants always
maintain a sufficient distance to the air out-
lets. If necessary, redirect the airflow to
another area of the vehicle interior.
In order to ensure the direct flow of fresh air
through the air vents into the vehicle interior,
please observe the following notes:
R
keep the air inlet between the windshield
and the hood free of blockages, such as ice,
snow or leaves.
R
never cover the air vents or air intake grilles
in the vehicle interior.
Setting the center air vents
:
Center air vent, left
;
Center air vent, right
=
Center vent thumbwheel, right
?
Center vent thumbwheel, left
X
To open/close: turn thumbwheels =
and ? up or down.
Setting the side air vents
:
Defroster vent
;
Side air vent
=
Thumbwheel for side air vent
X
To open/close: turn thumbwheel = up or
down.
Setting the glove box air vent
!
Close the air vent when heating the vehi-
cle.
At high outside temperatures, open the air
vent and activate the "cooling with air dehu-
midification" function. Otherwise, temper-
Setting the air vents
153
Climate control
Z
ature-sensitive items stored in the glove
box could be damaged.
:
Air vent thumbwheel
;
Air vent
When the climate control system is activated,
the glove box can be ventilated, for instance
to cool its contents. The level of airflow
depends on the airflow and air distribution
settings.
X
To open/close: turn thumbwheel : to the
left or right.
Setting the rear-compartment air
vents
Setting the center vents in the rear com-
partment
:
Rear-compartment air vent thumbwheel
;
Rear-compartment air vent, right
=
Rear control panel, only for Canada with
3-zone automatic climate control
?
Rear-compartment air vent, left
X
To open/close: turn thumbwheel : up or
down.
Setting the B-pillar air vent
:
B-pillar air vent
;
Thumbwheel for B-pillar air vent
X
To open/close: turn thumbwheel ; to the
left or right.
154
Setting the air vents
Climate control
Useful information ............................ 156
Notes on breaking-in a new vehicle
............................................................. 156
Driving ............................................... 156
Automatic transmission ................... 165
Refueling ............................................ 173
Parking ............................................... 179
Driving tips ........................................ 181
Driving systems ................................ 187
155
Driving and parking
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Notes on breaking-in a new vehicle
Important safety notes
The sensor system of some driving and driv-
ing safety systems adjusts automatically
while a certain distance is being driven after
the vehicle has been delivered or after
repairs. Full system effectiveness is not
reached until the end of this teach-in proce-
dure.
New and replaced brake pads and discs only
reach their optimum braking effect after sev-
eral hundred kilometers of driving. Compen-
sate for this by applying greater force to the
brake pedal.
The first 1000 miles (1500 km)
The more you look after the engine when it is
new, the more satisfied you will be with its
performance in the future.
R
You should therefore drive at varying vehi-
cle and engine speeds for the first
1000 miles (1500 km).
R
Avoid heavy loads, e.g. driving at full throt-
tle, during this period.
R
Change gear in good time, before the tach-
ometer needle is Ô of the way to the red
area of the tachometer.
R
Try to avoid depressing the accelerator
pedal beyond the point of resistance (kick-
down).
After 1000 miles (1500 km), you can increase
the engine speed gradually and accelerate
the vehicle to full speed.
Additional breaking-in notes for AMG vehi-
cles:
R
Do not drive faster than 85 mph
(140 km/h) for the first 1,000 miles
(1,500 km).
R
Only allow the engine to reach a maximum
engine speed of 4,500 rpm briefly.
R
Change gear in good time.
i
You should also observe these notes on
breaking in if the engine or parts of the drive
train on your vehicle have been replaced.
i
Always observe the respective speed lim-
its.
AMG vehicles with self-locking rear
axle differential
Your vehicle is equipped with a self-locking
differential on the rear axle. To protect the
differential on the rear axle, carry out an oil
change after a breaking-in phase of
2,000 miles (3,000 km). This oil change pro-
longs the service life of the differential. Have
the oil change carried out at a qualified spe-
cialist workshop.
Driving
Important safety notes
G
WARNING
Objects in the driver's footwell can restrict the
pedal travel or obstruct a depressed pedal.
The operating and road safety of the vehicle is
jeopardized. There is a risk of an accident.
156
Driving
Driving and parking
Make sure that all objects in the vehicle are
stowed correctly, and that they cannot enter
the driver's footwell. Install the floormats
securely and as specified in order to ensure
sufficient clearance for the pedals. Do not use
loose floormats and do not place floormats on
top of one another.
G
WARNING
Unsuitable footwear can hinder correct usage
of the pedals, e.g.:
R
shoes with thick soles
R
shoes with high heels
R
slippers
There is a risk of an accident.
Wear suitable footwear to ensure correct
usage of the pedals.
G
WARNING
If you switch off the ignition while driving,
safety-relevant functions are only available
with limitations, or not at all. This could affect,
for example, the power steering and the brake
boosting effect. You will require considerably
more effort to steer and brake. There is a risk
of an accident.
Do not switch off the ignition while driving.
G
WARNING
If the parking brake has not been fully
released when driving, the parking brake can:
R
overheat and cause a fire
R
lose its hold function.
There is a risk of fire and an accident. Release
the parking brake fully before driving off.
!
Do not warm up the engine with the vehi-
cle stationary. Drive off immediately. Avoid
high engine speeds and driving at full throt-
tle until the engine has reached its operat-
ing temperature.
Only shift the automatic transmission to
the desired drive position when the vehicle
is stationary.
Where possible, avoid spinning the drive
wheels when pulling away on slippery
roads. You could otherwise damage the
drive train.
!
AMG vehicles: at low engine oil temper-
atures below 68 (+20 †), the maximum
engine speed is restricted in order to pro-
tect the engine. To protect the engine and
maintain smooth engine operation, avoid
driving at full throttle when the engine is
cold.
HYBRID vehicles: ensure that you read the
"HYBRID" supplement included in the vehicle
literature. Otherwise, you may not recognize
dangers.
SmartKey positions
SmartKey
g
To remove the SmartKey
(shift the transmission to position P)
1
Power supply for some consumers, such
as the windshield wipers
2
Ignition (power supply for all consumers)
and drive position
3
To start the engine
i
The SmartKey can be turned in the igni-
tion lock even if it is not the correct Smart-
Key for the vehicle. The ignition is not
switched on. The engine cannot be started.
Driving
157
Driving and parking
Z
KEYLESS-GO
General notes
Vehicles with KEYLESS-GO are equipped with
SmartKeys featuring the integrated KEYLESS-
GO function and a detachable Start/Stop but-
ton.
The Start/Stop button must be inserted in the
ignition lock and the SmartKey must be in the
vehicle.
When you insert the Start/Stop button into
the ignition lock, the system needs approx-
imately two seconds recognition time. You
can then use the Start/Stop button.
Pressing the Start/Stop button several times
in succession corresponds to the different
SmartKey positions in the ignition lock. This is
only the case if you are not depressing the
brake pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts immedi-
ately.
A check which periodically establishes a radio
connection between the vehicle and the
SmartKey determines whether a valid Smart-
Key is in the vehicle. This occurs, for example,
when starting the engine.
To start the vehicle without actively using the
SmartKey:
R
the Start/Stop button must be inserted in
the ignition lock.
R
the SmartKey must be in the vehicle.
R
the vehicle must not be locked with the
SmartKey or KEYLESS-GO (Y page 85).
Do not keep the KEYLESS-GO key:
R
with electronic devices, e.g. a mobile
phone or another SmartKey.
R
with metallic objects, e.g. coins or metal
foil.
R
inside metallic objects, e.g. a metal case.
This can affect the functionality of KEYLESS-
GO.
If you lock the vehicle with the SmartKey's
remote control or with KEYLESS-GO, after a
short time:
R
you will not be able to switch on the ignition
with the Start/Stop button.
R
you will not be able to start the engine with
the Start/Stop button until the vehicle is
unlocked again.
If you lock the vehicle centrally using the but-
ton on the front door (Y page 90), you can
continue to start the engine with the Start/
Stop button.
The engine can be turned off while the vehicle
is in motion by pressing and holding the
Start/Stop button for approximately three
seconds. This function operates independ-
ently of the ECO start/stop automatic engine
switch-off function.
Key positions with KEYLESS-GO
:
Start/Stop button
;
Ignition lock
As soon as the ignition is switched on, all the
indicator lamps in the instrument cluster light
up. If an indicator lamp does not go out after
starting the engine or lights up while driving,
see (Y page 281).
If Start/Stop button : has not yet been
pressed, this corresponds to the SmartKey
being removed from the ignition.
158
Driving
Driving and parking
X
To switch on the power supply: press
Start/Stop button : once.
The power supply is switched on. You can
now activate the windshield wipers, for
example.
The power supply is switched off again if:
R
the driver's door is opened and
R
you press Start/Stop button : twice when
in this position
X
To switch on the ignition: press Start/
Stop button : twice.
The ignition is switched on.
The ignition is switched off when:
R
the driver's door is opened and
R
you press Start/Stop button : once when
in this position.
=
Start/Stop button USA
?
Start/Stop button Canada
Removing the Start/Stop button
You can remove the Start/Stop button from
the ignition lock and start the vehicle as nor-
mal using the SmartKey.
It is only possible to switch between Start/
Stop button mode and SmartKey operation
when the transmission is in position P.
X
Remove Start/Stop button : from ignition
lock ;.
You do not have to remove the Start/Stop
button from the ignition lock when you leave
the vehicle. You should, however, always take
the SmartKey with you when leaving the vehi-
cle. As long as the SmartKey is in the vehicle:
R
the vehicle can be started using the Start/
Stop button
R
the electrically powered equipment can be
operated
Starting the engine
Important safety notes
G
WARNING
If children are left unsupervised in the vehicle,
they could:
R
open the doors, thus endangering other
people or road users.
R
get out and disrupt traffic.
R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
R
release the parking brake.
R
shifting the automatic transmission out of
park position P
R
Start the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Driving
159
Driving and parking
Z
G
WARNING
Flammable materials introduced through
environmental influence or by animals can
ignite if in contact with the exhaust system or
parts of the engine that heat up. There is a risk
of fire.
Carry out regular checks to make sure that
there are no flammable foreign materials in
the engine compartment or in the exhaust
system.
!
Do not depress the accelerator when
starting the engine.
General notes
i
Vehicles with a gasoline engine: the
catalytic converter is preheated for up to
30 seconds after a cold start. The sound of
the engine may change during this time.
Automatic transmission
X
Shift the transmission to position P.
The transmission position display in the
multifunction display shows P.
i
You can start the engine in transmission
position P and N.
Starting procedure with the SmartKey
i
To start the engine using the SmartKey
instead of KEYLESS-GO, pull the Start/
Stop button out of the ignition lock.
X
Vehicles with a diesel engine: turn the
SmartKey to position 2 in the ignition lock
(Y page 157).
The % preglow indicator lamp in the
instrument cluster lights up.
X
Turn the SmartKey to position 3 in the igni-
tion (Y page 157) lock and release it as
soon as the engine is running.
i
Vehicles with a diesel engine: you can
start the engine without preglow if the
engine is warm.
Using KEYLESS-GO to start the engine
i
The Start/Stop button can be used to
start the vehicle manually without inserting
the SmartKey into the ignition lock. The
Start/Stop button must be inserted in the
ignition lock and the SmartKey must be in
the vehicle. This mode for starting the
engine operates independently of the ECO
start/stop automatic engine start function.
X
Depress the brake pedal and keep it
depressed.
X
Press the Start/Stop button once
(Y page 158).
Vehicles with a gasoline engine: the
engine starts.
Vehicles with a diesel engine: preglow is
activated and the engine starts.
Pulling away
General notes
G
WARNING
If the engine speed is above the idling speed
and you engage transmission position D or R,
the vehicle could pull away suddenly. There is
a risk of an accident.
When engaging transmission position D or R,
always firmly depress the brake pedal and do
not simultaneously accelerate.
!
If a warning tone sounds and the
Release Park. BrakeRelease Park. Brake message appears
in the multifunction display, the parking
brake is still applied. Release the parking
brake.
i
Depress the accelerator carefully when
pulling away.
i
The vehicle locks centrally once you have
pulled away. The locking knobs in the doors
drop down.
You can open the doors from the inside at
any time.
160
Driving
Driving and parking
You can also deactivate the automatic lock-
ing feature (Y page 246).
i
It is only possible to shift the transmission
from position P to the desired position if
you depress the brake pedal. If the brake
pedal is not depressed, the DIRECT SELECT
lever can still be moved but the parking lock
remains engaged.
i
Upshifts take place at higher engine
speeds after a cold start. This helps the
catalytic converter to reach its operating
temperature more quickly.
Hill start assist
Hill start assist helps you when pulling away
forwards or in reverse on an uphill gradient. It
holds the vehicle for a short time after you
have removed your foot from the brake pedal.
This gives you enough time to move your foot
from the brake pedal to the accelerator pedal
and to depress it before the vehicle begins to
roll.
G
WARNING
After a short time, hill start assist will no lon-
ger brake your vehicle and it could roll away.
There is a risk of an accident and injury.
Therefore, quickly move your foot from the
brake pedal to the accelerator pedal. Never
leave the vehicle when it is held by hill start
assist.
Hill start assist is not active if:
R
you are pulling away on a level road or on a
downhill gradient.
R
the transmission is in position N.
R
the parking brake is applied.
R
ESP
®
is malfunctioning.
ECO start/stop function
Introduction
The ECO start/stop function switches the
engine off automatically if the vehicle is stop-
ped under certain conditions.
The engine starts automatically when the
driver wants to pull away again. The ECO
start/stop function thereby helps you to
reduce the fuel consumption and emissions
of your vehicle.
Important safety notes
G
WARNING
If the engine is switched off automatically and
you exit the vehicle, the engine is restarted
automatically. The vehicle may begin moving.
There is a risk of accident and injury.
If you wish to exit the vehicle, always turn off
the ignition and secure the vehicle against
rolling away.
General notes
:
ECO start/stop display
i
Hybrid vehicles: observe the notes on
the ECO start/stop function in the
"HYBRID" supplement.
If the engine has been switched off automat-
ically by the ECO start/stop function, the
¤ symbol is shown in the multifunction
display.
AMG vehicles: the AMG menu in the multi-
function display additionally shows the Stop/Stop/
Start activeStart active message.
Every time you switch on the engine using the
SmartKey or the Start/Stop button, the ECO
start/stop function is activated.
Driving
161
Driving and parking
Z
AMG vehicles: the ECO start/stop function
is only available in drive program C.
Automatic engine switch-off
If the vehicle is braked to a standstill in D or N,
the ECO start/stop function switches off the
engine automatically.
The ECO start/stop function is operational
when:
R
the indicator lamp in the ECO button is lit
green.
R
the outside temperature is within the range
that is suitable for the system.
R
the engine is at normal operating temper-
ature.
R
the set temperature for the vehicle interior
has been reached.
R
the battery is sufficiently charged.
R
the system detects that the windshield is
not fogged up when the air-conditioning
system is switched on.
R
the hood is closed.
R
the driver's door is closed and the driver's
seat belt is fastened.
i
All of the vehicle's systems remain active
when the engine is stopped automatically.
i
The HOLD function can also be activated
if the engine has been switched off auto-
matically. It is then not necessary to con-
tinue applying the brakes during the auto-
matic stop phase. When you depress the
accelerator pedal, the engine starts auto-
matically and the braking effect of the
HOLD function is deactivated.
i
All vehicles (apart from AMG vehi-
cles): automatic engine switch-off can take
place a maximum of four times consecu-
tively (initial stop then repeated three
times).
i
AMG vehicles: times which the engine
can be automatically switched off.
Automatic engine start
The engine starts automatically if:
R
you switch off the ECO start/stop function
by pressing the ECO button.
R
in transmission position D or N the brake
pedal is released and the HOLD function is
not active.
R
you depress the accelerator pedal.
R
you engage reverse gear R.
R
you move the transmission out of position
P.
R
you switch to drive program S, S+ or M
(AMG vehicles).
R
you unfasten your seat belt or open the
driver's door.
R
the vehicle starts to roll.
R
the brake system requires this.
R
the temperature in the vehicle interior devi-
ates from the set range.
R
the system detects moisture on the wind-
shield when the air-conditioning system is
switched on.
R
the battery's condition of charge is too low.
i
Shifting the transmission to position P
does not start the engine.
Deactivating/activating the ECO start/
stop function
All vehicles (except AMG vehicles)
162
Driving
Driving and parking
X
To deactivate: press ECO button :.
Indicator lamp ; goes out.
X
To activate: press ECO button :.
Indicator lamp ; lights up.
If the indicator lamp on the ECO button is off,
the ECO start/stop function has been deac-
tivated manually or as the result of a mal-
function.
AMG vehicles
X
To switch off: in drive program C, press
ECO button :.
or
X
Switch to drive program S, S+ or M
(Y page 169).
Indicator lamp ; goes out.
X
To activate: press ECO button :.
Indicator lamp ; lights up.
If drive program S, S+ or M is active, the
automatic transmission switches to drive
program C.
If the indicator lamp on the ECO button is off,
the ECO start/stop function has been deac-
tivated manually or as the result of a mal-
function.
Driving
163
Driving and parking
Z
Problems with the engine
Problem
Possible causes/consequences and MM Solutions
The engine does not
start. The starter motor
can be heard.
R
There is a malfunction in the engine electronics.
R
There is a malfunction in the fuel supply.
X
Before attempting to start the engine again, turn the SmartKey
in the ignition back to position 0 or press the Start/Stop button
repeatedly until all indicator lamps in the instrument cluster go
out.
X
Try to start the engine again (Y page 159). Avoid excessively
long and frequent attempts to start the engine as these will drain
the battery.
If the engine does not start after several attempts:
X
Consult a qualified specialist workshop.
The engine does not
start. You cannot hear
the starter motor.
The on-board voltage is too low because the battery is too weak or
discharged.
X
Jump-start the vehicle (Y page 353).
If the engine does not start despite attempts to jump-start it:
X
Consult a qualified specialist workshop.
The starter motor was exposed to a thermal load that was too high.
X
Allow the starter motor to cool down for approximately two
minutes.
X
Try to start the engine again.
If the engine still does not start:
X
Consult a qualified specialist workshop.
Vehicles with a gaso-
line engine:
The engine is not run-
ning smoothly and is
misfiring.
There is a malfunction in the engine electronics or in a mechanical
component of the engine management system.
X
Only depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic con-
verter and damage it.
X
Have the cause rectified immediately at a qualified specialist
workshop.
The coolant tempera-
ture gauge shows a
value above 248
(120 †).
The coolant level is too low. The coolant is too hot and the engine
is no longer being cooled sufficiently.
X
Stop as soon as possible and allow the engine and the coolant to
cool down.
X
Check the coolant level (Y page 333). Observe the warning
notes as you do so and add coolant if necessary.
164
Driving
Driving and parking
Automatic transmission
Important safety notes
G
WARNING
If the engine speed is above the idling speed
and you engage transmission position D or R,
the vehicle could pull away suddenly. There is
a risk of an accident.
When engaging transmission position D or R,
always firmly depress the brake pedal and do
not simultaneously accelerate.
G
WARNING
The automatic transmission switches to neu-
tral position N when you switch off the engine.
The vehicle may roll away. There is a risk of an
accident.
After switching off the engine, always switch
to parking position P. Prevent the parked vehi-
cle from rolling away by applying the parking
brake.
HYBRID vehicles: ensure that you read the
"HYBRID" supplement included in the vehicle
literature. Otherwise, you may not recognize
dangers.
Selector lever (AMG vehicles)
Overview of transmission positions
Selector lever in AMG vehicles with P button
j
Park position with parking lock
k
Reverse gear
i
Neutral
h
Drive
Transmission position and drive pro-
gram display
!
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select trans-
mission position D and automatic drive pro-
gram C or S.
:
Transmission position display
;
Drive program display
The current position of the selector lever is
shown by the indicators next to the selector
lever.
The indicators light up when the SmartKey is
inserted into the ignition lock. The indicators
go out when the SmartKey is removed from
the ignition lock.
Engaging park position P
X
When the vehicle is stationary, press but-
ton :.
Automatic transmission
165
Driving and parking
Z
DIRECT SELECT lever
Overview of transmission positions
j
Park position with parking lock
k
Reverse gear
i
Neutral
h
Drive
The DIRECT SELECT lever is on the right of the
steering column.
i
The DIRECT SELECT lever always returns
to its original position. The current trans-
mission position P, R, N or D appears in the
transmission position display in the multi-
function display (Y page 166).
Transmission position and drive pro-
gram display
!
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select trans-
mission position D and drive program E or
S.
The current transmission position and drive
program appear in the multifunction display.
i
The arrows in the transmission position
display show how and into which transmis-
sion positions you can change using the
DIRECT SELECT lever.
:
Transmission position display
;
Drive program display
Engaging park position P
!
If the engine speed is too high or the vehi-
cle is moving, do not shift the automatic
transmission directly from D to R, from R to
D or directly to P. The automatic transmis-
sion could otherwise be damaged.
j
Park position with parking lock
k
Reverse gear
i
Neutral
h
Drive
X
Push the DIRECT SELECT lever in the direc-
tion of arrow P.
i The automatic transmission shifts into
park position P automatically:
R
if you open the driver's door while the
vehicle is stationary in transmission posi-
tion D or R
R
if you open the door while traveling at
very low speeds in transmission position
D or R
166
Automatic transmission
Driving and parking
HOLD function or DISTRONIC PLUS: if the
vehicle is braked using the HOLD function or
DISTRONIC PLUS, the automatic transmis-
sion shifts automatically to transmission
position P. In addition, at least one of the fol-
lowing conditions must be fulfilled:
R
the engine is switched off.
R
the driver's door is open and the seat belt is
not in the buckle.
Engaging reverse gear R
!
Only shift the automatic transmission to R
when the vehicle is stationary.
X
If the transmission is in position D or N:
push the DIRECT SELECT lever up past the
first point of resistance.
X
If the transmission is in position P: depress
the brake pedal and push the DIRECT
SELECT lever up past the first point of
resistance.
i
The ECO start/stop function is not avail-
able when reverse gear is engaged.
Further information on the ECO start/stop
function (Y page 161).
Shifting to neutral N
G
WARNING
If children are left unsupervised in the vehicle,
they could:
R
open the doors, thus endangering other
people or road users.
R
get out and disrupt traffic.
R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
R
release the parking brake.
R
shifting the automatic transmission out of
park position P
R
Start the engine.
There is a risk of an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
X
If the transmission is in position D or R:
push the DIRECT SELECT lever up or down
to the first point of resistance.
X
If the transmission is in position P: depress
the brake pedal and push the DIRECT
SELECT lever up or down to the first point of
resistance.
If the engine has been switched off, the auto-
matic transmission automatically shifts to N.
If the automatic transmission is to remain in
neutral N, e.g. for washing the vehicle in car
washes with a towing device, please observe
the following instructions:
Using the SmartKey:
R
Make sure that the ignition is switched on.
R
When the vehicle is stationary, depress the
brake pedal and keep it depressed.
R
Shift to neutral N.
R
Release the brake pedal.
R
If the parking brake is engaged, release it.
R
Switch off the ignition and leave the Smart-
Key in the ignition lock.
Using KEYLESS-GO:
R
Make sure that the ignition is switched on.
R
When the vehicle is stationary, depress the
brake pedal and keep it depressed.
R
Engage park position P.
R
Release the brake pedal.
R
Remove the Start/Stop button from the
ignition lock.
R
Insert the SmartKey into the ignition lock.
R
Switch on the ignition.
R
Depress the brake pedal and keep it
depressed.
R
Shift to neutral N.
R
Release the brake pedal.
R
If the parking brake is engaged, release it.
R
Switch off the ignition and leave the Smart-
Key in the ignition lock.
Automatic transmission
167
Driving and parking
Z
Engaging drive position D
X
If the transmission is in position R or N:
push the DIRECT SELECT lever down past
the first point of resistance.
X
If the transmission is in position P: depress
the brake pedal and push the DIRECT
SELECT lever down past the first point of
resistance.
Transmission positions
B
Park position
Do not shift the transmission into
position P (Y page 179) unless the
vehicle is stationary. The parking
lock should not be used as a brake
when parking. Always apply the
parking brake in addition to the
parking lock in order to secure the
vehicle.
If the vehicle electronics are mal-
functioning, the transmission may
be locked in position P. Have the
vehicle electronics checked imme-
diately at a qualified specialist
workshop.
C
Reverse gear
Only shift the transmission to R
when the vehicle is stationary.
A
Neutral
Do not shift the transmission to N
while driving. Otherwise, the auto-
matic transmission could be dam-
aged.
No power is transmitted from the
engine to the drive wheels.
Releasing the brakes will allow you
to move the vehicle freely, e.g. to
push it or tow it.
If ESP
®
is deactivated or faulty:
only shift the transmission to posi-
tion N if the vehicle is in danger of
skidding, e.g. on icy roads.
!
Rolling in neutral N can damage
the drive train.
7
Drive
The automatic transmission
changes gear automatically. All
forward gears are available.
Driving tips
Changing gear
The automatic transmission shifts to the indi-
vidual gears automatically when it is in trans-
mission position D. This automatic gear shift-
ing behavior is determined by:
R
the selected drive program (Y page 169)
R
the position of the accelerator pedal
(Y page 168)
R
the road speed
Accelerator pedal position
Your style of driving influences how the auto-
matic transmission shifts gear:
R
little throttle: early upshifts
R
more throttle: late upshifts
168
Automatic transmission
Driving and parking
AMG vehicles
When shifting down, the double-clutch func-
tion is active regardless of the currently selec-
ted drive program. The double-clutch function
reduces load change reactions and is condu-
cive to a sporty driving style. The sound gen-
erated by the double-clutch function depends
on the drive program selected.
Kickdown
Use kickdown for maximum acceleration:
X
Depress the accelerator pedal beyond the
pressure point.
The automatic transmission shifts to a
lower gear depending on the engine speed.
X
Ease off the accelerator pedal once the
desired speed is reached.
The automatic transmission shifts back up.
Rocking the vehicle free
Rocking the vehicle free by shifting back and
forth between transmission positions D and R
can help to free a vehicle that has become
stuck in mud or snow. The vehicle's engine
management restricts switching between
transmission positions D and R to speeds up
to a maximum of 5 mph (9 km/h). To shift
back and forth between transmission posi-
tions D and R, move the DIRECT SELECT lever
up and down past the point of resistance.
Program selector button
General notes
All vehicles (except AMG vehicles)
X
Press program selector button : repeat-
edly until the letter for the desired gearshift
program appears in the multifunction dis-
play.
The program selector button allows you to
choose between different driving character-
istics.
E Economy Comfortable, economical
driving
S Sport Sporty driving style
i
For further information on the automatic
drive program, see (Y page 170).
i
The automatic transmission shifts to
automatic drive program E each time the
engine is started.
AMG vehicles
Drive program selector with manual drive program
Automatic transmission
169
Driving and parking
Z
X
Turn drive program selector : until the
desired drive program appears in the mul-
tifunction display in the speedometer.
The drive program indicator on drive pro-
gram selector : lights up in red.
i
Further information about permanent
drive program M (Y page 172).
As well as this permanent drive program M,
you can also activate temporary drive pro-
gram M (Y page 171).
C Controlled
Efficiency
Comfortable, economical
driving
S Sport Sporty driving style
S+ SportPlus Extremely sporty driving
style
M Manual Manual gear shifting
RS RACE
START
Optimal vehicle accelera-
tion from a standstill
i
For further information on the automatic
drive program, see (Y page 170).
i
The automatic transmission shifts to
automatic drive program C each time the
engine is started.
i
RS cannot be selected during normal driv-
ing. For further information on RACE
START, see (Y page 201).
Steering wheel paddle shifters
In the manual drive program, you can change
gears manually using steering wheel paddle
shifters : and ;.
Further information about permanent drive
program M (Y page 172).
Further information about temporary drive
program M (Y page 171).
i
You can only change gear with the steer-
ing wheel paddle shifters when the trans-
mission is in position D.
Automatic drive program
Automatic drive program E
Drive program E (drive program C on MAG
vehicles) is characterized by the following:
R
comfort-oriented engine settings.
R
optimal fuel consumption resulting from
the automatic transmission shifting up
sooner.
R
the vehicle pulling away more gently in
forward and reverse gears, unless the
accelerator pedal is depressed fully.
R
increased sensitivity. This improves driving
stability on slippery road surfaces, for
example.
R
the automatic transmission shifting up
sooner. This results in the vehicle being
driven at lower engine speeds and the
wheels being less likely to spin.
Automatic drive program S
Drive program S (or, in the case of AMG vehi-
cles, drive programs S and S+) is character-
ized by the following:
R
sporty engine and automatic transmission
settings.
R
the automatic transmission shifting up
later.
R
the fuel consumption possibly being higher
as a result of the later automatic transmis-
sion shift points.
170
Automatic transmission
Driving and parking
Manual drive program M
General notes
In this drive program, you can briefly change
gear yourself by using the steering wheel pad-
dle shifters. The transmission must be in posi-
tion D.
You can activate manual drive program M in
the E and S automatic drive programs.
i
As well as temporary drive program M,
you can also activate permanent drive pro-
gram M (Y page 169).
Further information about permanent drive
program M (Y page 172).
Activating
X
Shift the transmission to position D.
X
Pull the left or right steering wheel paddle
shifter (Y page 170).
Manual drive program M is temporarily acti-
vated. The selected gear and M appear in
the multifunction display.
Shifting gears
If you pull on the left or right steering wheel
paddle shifter, the automatic transmission
switches to manual drive program M for a
limited amount of time. Depending on which
paddle shifter is pulled, the automatic trans-
mission immediately shifts into the next gear
down or up, if permitted.
X
To shift up: pull the right-hand steering
wheel paddle shifter (Y page 170).
The automatic transmission shifts up to the
next gear.
i
If the maximum engine speed on the cur-
rently engaged gear is reached and you
continue to accelerate, the automatic
transmission automatically shifts up in
order to prevent engine damage.
X
To shift down: pull on the left-hand steer-
ing wheel paddle shifter (Y page 170).
The automatic transmission shifts down to
the next gear.
i
If the engine exceeds the maximum
engine speed when shifting down, the auto-
matic transmission protects against engine
damage by not shifting down.
i
Automatic down shifting occurs when
coasting.
Shift recommendation
The gearshift recommendations assist you in
adopting an economical driving style. The rec-
ommended gear is shown in the multifunction
display.
X
Shift to recommended gear ; according
to gearshift recommendation : when
shown in the multifunction display of the
instrument cluster.
Deactivating
If you have activated manual drive program
M, it will remain active for a certain amount of
time. Under certain conditions the minimum
amount of time is extended, e.g. in the case of
lateral acceleration, during an overrun phase
or when driving on steep terrain.
If manual drive program M has been deacti-
vated, the automatic transmission shifts into
the automatic drive program that was last
selected, i.e. E or S.
You can also deactivate manual drive pro-
gram M yourself:
X
Pull on the right-hand steering wheel pad-
dle shifter and hold it in place (Y page 170).
or
X
Use the DIRECT SELECT lever to switch the
transmission position (Y page 166).
Automatic transmission
171
Driving and parking
Z
or
X
Use the program selector button to change
the drive program (Y page 169).
Manual drive program M is deactivated.
The automatic transmission switches into
the automatic drive program that was last
selected, i.e. E or S.
Manual drive program (AMG vehicles)
General information
In this drive program, you can permanently
change gear yourself by using the steering
wheel paddle shifters. The transmission must
be in position D.
i
As well as this permanent drive program
M, you can also activate temporary drive
program M (Y page 171).
Switching on the manual drive program
X
Turn the drive program selector
(Y page 169) until M appears in the multi-
function display.
The indicator M on the drive program selec-
tor lights up in red.
The manual drive program is only available for
AMG vehicles.
Manual drive program M is different from
drive programs S and S+ with regard to spon-
taneity, responsiveness and smoothness of
gear changes.
Manual drive program M can be selected
using the drive program selector. In manual
drive program M, you can change gear using
the steering wheel paddle shifters if the trans-
mission is in position D. The gear currently
selected and engaged is shown in the multi-
function display.
Upshifting
!
In manual drive program M, the automatic
transmission does not shift up automati-
cally even when the engine limiting speed
for the current gear is reached. When the
engine limiting speed is reached, the fuel
supply is cut to prevent the engine from
overrevving. Always make sure that the
engine speed does not reach the red area of
the tachometer. There is otherwise a risk of
engine damage.
X
Pull the right-hand steering wheel paddle
shifter.
The automatic transmission shifts up to the
next gear.
:
Gear indicator
;
Upshift indicator
Before the engine speed reaches the red area,
an upshift indicator will be shown in the mul-
tifunction display.
Downshifting
X
Pull the left-hand steering wheel paddle
shifter.
The automatic transmission shifts down to
the next gear.
i
If you brake the vehicle or stop without
shifting down, the automatic transmission
will shift down to a gear that will allow the
vehicle to accelerate or pull away again.
Kickdown
i
It is not possible to use kickdown in man-
ual drive program M.
Switching off the manual drive program
X
Turn the drive program selector
(Y page 169) until C, S or S+ appears in the
multifunction display.
172
Automatic transmission
Driving and parking
Problems with the transmission
Problem
Possible causes/consequences and MM Solutions
The transmission has
problems shifting gear.
The transmission is losing oil.
X
Have the transmission checked at a qualified specialist work-
shop immediately.
The acceleration ability
is deteriorating.
The transmission no
longer changes gear.
The transmission is in emergency mode.
It is only possible to shift into second gear and reverse gear.
X
Stop the vehicle.
X
Shift the transmission to position P.
X
Switch off the engine.
X
Wait at least ten seconds before restarting the engine.
X
Shift the transmission to position D or R.
If D is selected, the transmission shifts into second gear; if R is
selected, the transmission shifts into reverse gear.
X
Have the transmission checked at a qualified specialist work-
shop immediately.
Transfer case
!
Performance tests may only be carried
out on a 2-axle dynamometer. The brake
system or transfer case could otherwise be
damaged. Contact a qualified specialist
workshop for a performance test.
!
To prevent ESP
®
from intervening, the
ignition must be switched off (SmartKey or
the Start/Stop button in position 0 or 1) if:
R
the parking brake is being tested on a
brake dynamometer.
R
the vehicle is being towed with only one
axle raised (not permitted for vehicles
with 4MATIC).
The brake system could otherwise be dam-
aged.
!
Vehicles with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
This section is only valid for vehicles with 4-
wheel drive (4MATIC). Power is always trans-
mitted to both axles.
Refueling
Important safety notes
G
WARNING
Fuel is highly flammable. If you handle fuel
incorrectly, there is a risk of fire and explo-
sion.
You must avoid fire, open flames, creating
sparks and smoking. Switch off the engine
and, if applicable, the auxiliary heating before
refueling.
G
WARNING
Fuel is poisonous and hazardous to health.
There is a risk of injury.
You must make sure that fuel does not come
into contact with your skin, eyes or clothing
and that it is not swallowed. Do not inhale fuel
vapors. Keep fuel away from children.
Refueling
173
Driving and parking
Z
If you or others come into contact with fuel,
observe the following:
R
Wash away fuel from skin immediately
using soap and water.
R
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical assistance with-
out delay.
R
If fuel is swallowed, seek medical assis-
tance without delay. Do not induce vomit-
ing.
R
Immediately change out of clothing which
has come into contact with fuel.
G
WARNING
Electrostatic buildup can create sparks and
ignite fuel vapors. There is a risk of fire and
explosion.
Always touch the vehicle body before opening
the fuel filler flap or touching the fuel pump
nozzle. Any existing electrostatic buildup is
thereby discharged.
G
WARNING
Vehicles with a diesel engine:
If you mix diesel fuel with gasoline, the flash
point is lower than that of pure diesel fuel.
When the engine is running, exhaust system
components could overheat without being
noticed. There is a risk of fire.
Never refuel with gasoline. Never mix gasoline
with diesel fuel.
!
Do not use diesel to refuel vehicles with a
gasoline engine. Do not switch on the igni-
tion if you accidentally refuel with the
wrong fuel. Otherwise, the fuel will enter
the fuel system. Even small amounts of the
wrong fuel could result in damage to the
fuel system and the engine. Notify a quali-
fied specialist workshop and have the fuel
tank and fuel lines drained completely.
!
Do not use gasoline to refuel vehicles with
a diesel engine. Do not switch on the igni-
tion if you accidentally refuel with the
wrong fuel. Otherwise, the fuel will enter
the fuel system. Even small amounts of the
wrong fuel could result in damage to the
fuel system and the engine. The repair
costs are high. Notify a qualified specialist
workshop and have the fuel tank and fuel
lines drained completely.
!
Overfilling the fuel tank could damage the
fuel system.
!
Take care not to spill any fuel on painted
surfaces. You could otherwise damage the
paintwork.
!
Use a filter when refueling from a fuel can.
Otherwise, the fuel lines and/or injection
system could be blocked by particles from
the fuel can.
Do not get into the vehicle again during the
refueling process. Otherwise, electrostatic
charge could build up again.
If you overfill the fuel tank, fuel could spray
out when the fuel pump nozzle is removed.
i
Flexible Fuel vehicles can be recognized
by the Ethanol up to E85 sticker on the
inside of the fuel filler flap.
For further information on fuel and fuel quality
(Y page 412).
Refueling
General information
Pay attention to the important safety notes
(Y page 173).
The fuel filler flap is unlocked or locked auto-
matically when you open or close the vehicle
with the SmartKey or with KEYLESS-GO.
The position of the fuel filler cap is displayed
8 in the instrument cluster. The arrow
next to the filling pump indicates the side of
the vehicle.
174
Refueling
Driving and parking
Opening the fuel filler flap
:
To open the fuel filler flap
;
To insert the fuel filler cap
=
Tire pressure table
?
Fuel type to be used
X
Switch the engine off.
X
Remove the SmartKey from the ignition
lock.
or, on vehicles with KEYLESSGO:
X
Open the driver's door.
The on-board electronics now have status
0. This is the same as the SmartKey having
been removed.
The driver’s door can be closed again.
X
Press the fuel filler flap in the direction of
arrow :.
The fuel filler flap opens slightly.
X
Open the fuel filler flap fully.
X
Turn the fuel filler flap counter-clockwise
and remove it.
X
Sedan: insert the fuel filler cap into the
bracket on the inside of fuel filler flap ;.
or
X
Wagon: insert the fuel filler cap into the
recesses in the fuel filler flap hinge arm
horizontally from above.
X
Completely insert the filler neck of the fuel
pump nozzle into the tank, hook in place
and refuel.
X
Only fill the tank until the pump nozzle
switches off.
i
Vehicles with a diesel engine: the filler
neck is designed for refueling at diesel fill-
ing pumps.
i
Do not add any more fuel after the pump
stops filling for the first time. Otherwise,
fuel may leak out.
Closing the fuel filler flap
X
Replace the cap on the filler neck and turn
clockwise until it engages audibly.
X
Press the fuel filler flap closed until it
engages audibly.
i
Close the fuel filler flap before locking the
vehicle. Otherwise, the locking pin of the
central locking prevents the fuel filler flap
from closing.
i
If you are driving with the fuel filler cap
open, the 8 reserve fuel warning lamp
flashes. A message appears in the multi-
function display (Y page 267)
(Y page 267).
In addition, the ; Check Engine warning
lamp may light up (Y page 286).
For further information on warning and indi-
cator lamps in the instrument cluster, see
(Y page 286).
Fuel filler flap emergency release
X
Sedan: open the trunk lid.
X
Slide down the parcel net.
X
Open the right-hand side trim panel.
Refueling
175
Driving and parking
Z
X
Detach the emergency release from
retainer :.
X
Pull the emergency release in the direction
of arrow ;.
The fuel filler flap is unlocked.
X
Open the fuel filler flap.
X
Wagon: open the tailgate.
X
Open the right-hand side trim panel.
X
Fold down the paneling.
X
Pull emergency release : in the direction
of the arrow.
The fuel filler flap is unlocked.
X
Open the fuel filler flap.
176
Refueling
Driving and parking
Problems with fuel and the fuel tank
This section provides descriptions of and solutions to safety-relevant problems. Descriptions
of and solutions to further problems can be found in the Digital Operator's Manual.
Problem
Possible causes/consequences and MM Solutions
Fuel is leaking from the
vehicle.
The fuel line or the fuel tank is faulty.
G
WARNING
Risk of explosion or fire.
X
Turn the SmartKey to position 0 in the ignition lock and remove
it immediately (Y page 157).
X
Do not restart the engine under any circumstances.
X
Consult a qualified specialist workshop.
DEF (BlueTEC vehicles only)
Important notes on use
To function properly, BlueTEC exhaust gas
aftertreatment must be operated with the
reducing agent DEF. Adding DEF is one of the
tasks performed during maintenance. Under
normal operating conditions, a tank of DEF
lasts until the next service due date.
When the supply of DEF is almost used up, the
CheckCheck AdditiveAdditive SeeSee Operator'sOperator's ManualManual
message is shown in the multifunction dis-
play.
When the DEF supply drops to a minimum, the
Remaining Starts: 16Remaining Starts: 16 message is shown
in the multifunction display.
If the Remaining Starts: 16Remaining Starts: 16 message
appears in the multifunction display, you can
start the engine another 16 times. If DEF is
not refilled, you will subsequently be unable
to start the engine.
X
Add at least 1 gal (3.8 l) of DEF.
X
Switch on the ignition for at least 60 sec-
onds.
X
Start the engine.
i
Have the DEF tank refilled at a qualified
specialist workshop.
Use the special DEF refill bottle when adding
DEF between maintenance intervals. Contact
an authorized Mercedes-Benz Center with
any questions or, if necessary, contact Road-
side Assistance (Y page 25).
If the outside temperature is below 12
(Ò11 †) it may be difficult to top up. If DEF is
frozen and there is an active warning indica-
tor, it may not be possible to add DEF. Park
the vehicle in a warmer place, e.g. in a garage,
until DEF has become fluid again. It will then
be possible to add DEF again. Alternatively,
have the DEF tank refilled at a qualified spe-
cialist workshop.
Further information about BlueTEC exhaust
gas aftertreatment and DEF is available at any
authorized Mercedes-Benz Center.
Important safety notes on the refilling
procedure
DEF is a water-soluble fluid for the exhaust
gas aftertreatment of diesel engines. It is:
R
not poisonous
R
colorless and odorless
R
not flammable
When you open the DEF container, small
amounts of ammonia vapor may be released.
Ammonia vapors have a pungent odor and are
particularly irritating to the skin, to mucous
Refueling
177
Driving and parking
Z
membranes and to the eyes. You may expe-
rience a burning sensation in your eyes, nose
and throat. Coughing and watering of the
eyes are possible.
Do not inhale ammonia vapors. Fill the DEF
tank only in well-ventilated areas.
DEF must not come into contact with your
skin, eyes or clothing and must not be swal-
lowed. Keep DEF away from children.
If you or other persons come into contact with
DEF, observe the following:
R
Rinse DEF from your skin immediately with
soap and water.
R
If DEF comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical assistance with-
out delay.
R
If DEF has been swallowed, rinse your
mouth out immediately. Drink plenty of
water. Seek medical assistance without
delay.
R
Change out of clothing contaminated with
DEF immediately.
!
Only use DEF in accordance with
ISO 22241. Do not mix any additives with
DEF, and do not dilute DEF with water. This
may destroy the BlueTEC exhaust gas after-
treatment system.
!
Rinse surfaces that have come into con-
tact with DEF immediately with water or
remove DEF using a damp cloth and cold
water. If the DEF has already crystallized,
use a sponge and cold water to clean it. DEF
residues crystallize after time and contam-
inate the affected surfaces.
!
DEF is not a fuel additive and must not be
added to the fuel tank. If DEF is added to
the fuel tank, this can lead to engine dam-
age.
!
Only screw on the DEF refill bottle hand-
tight. It could otherwise be damaged.
The DEF filler neck is under the trunk floor.
X
Switch the ignition off.
X
Open the trunk.
X
Lift up the trunk floor (Y page 306).
X
Turn DEF cap : counter-clockwise and
remove it.
X
Turn DEF filler cap ; counter-clockwise
and open it.
Filler cap ; is secured with a plastic strip.
178
Refueling
Driving and parking
X
Unscrew the protective cap from DEF refill
bottle =.
X
Set DEF refill bottle = as shown on the
filler neck and screw it clockwise until it is
hand-tight.
X
Press DEF refill bottle = downwards.
The DEF tank is filled. This may take up to
one minute.
i
To top up between service intervals, fill
the DEF tank with approximately 1 gal
(3.8 l) of DEF. 1 gal (3.8 l) DEF is equivalent
to approximately 2 DEF refill bottles. Then
have the DEF supply checked at a qualified
specialist workshop and completely refilled
if necessary.
X
Release DEF refill bottle =.
When DEF refill bottle = is no longer
pressed down, filling stops. DEF refill bottle
= can be removed when it has been only
partially emptied.
X
Turn DEF refill bottle = counter-clockwise
and remove it.
X
Install DEF filler cap ; on the filler neck
and turn it clockwise.
X
Replace DEF cover : as shown and turn it
clockwise as far as it will go.
X
Fold the trunk floor down.
X
Close the trunk lid.
X
Drive faster than 10 mph (16 km/h).
The Check Additive See Operator'sCheck Additive See Operator's
ManualManual message goes out after approx-
imately one minute.
i
If the Check Additive See Opera‐Check Additive See Opera‐
tor's Manualtor's Manual message continues to be
shown in the multifunction display, add an
additional bottle of DEF.
For further information on DEF, see
(Y page 415).
Parking
Important safety notes
G
WARNING
Flammable material such as leaves, grass or
twigs may ignite if they come into contact with
hot parts of the exhaust system or exhaust
gas flow. There is a risk of fire.
Park the vehicle so that no flammable mate-
rials come into contact with parts of the vehi-
cle which are hot. Take particular care not to
park on dry grassland or harvested grain
fields.
G
WARNING
If you switch off the ignition while driving,
safety-relevant functions are only available
with limitations, or not at all. This could affect,
for example, the power steering and the brake
boosting effect. You will require considerably
more effort to steer and brake. There is a risk
of an accident.
Do not switch off the ignition while driving.
G
WARNING
If you leave children unsupervised in the vehi-
cle, they could set it in motion by, for example:
R
release the parking brake.
R
shift the automatic transmission out of the
parking position P.
R
start the engine.
In addition, they may operate vehicle equip-
ment and become trapped. There is a risk of
an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
Parking
179
Driving and parking
Z
!
Always secure the vehicle correctly
against rolling away. Otherwise, the vehicle
or its drivetrain could be damaged.
To ensure that the vehicle is secured against
rolling away unintentionally:
R
the parking brake must be applied.
R
the transmission must be in position P and
the SmartKey must be removed from the
ignition lock.
R
the front wheels must be turned towards
the curb on steep uphill or downhill gradi-
ents.
Switching off the engine
Important safety notes
G
WARNING
The automatic transmission switches to neu-
tral position N when you switch off the engine.
The vehicle may roll away. There is a risk of an
accident.
After switching off the engine, always switch
to parking position P. Prevent the parked vehi-
cle from rolling away by applying the parking
brake.
Vehicles with automatic transmission
X
Apply the parking brake firmly.
X
All vehicles (except AMG vehicles): shift
the transmission to position P.
Selector lever in AMG vehicles with P button
X
AMG vehicles: when the vehicle is station-
ary, press button :.
Using the SmartKey
X
Turn the SmartKey to position 0 in the igni-
tion lock and remove it.
The immobilizer is activated.
i
If you switch the engine off with the trans-
mission in position R or D, the automatic
transmission shifts to N automatically.
If you then open the driver's door or the
front-passenger door or remove the Smart-
Key from the ignition, the automatic trans-
mission shifts to P automatically.
If you shift the automatic transmission to N
before switching off the engine, the auto-
matic transmission remains in N even if the
driver's door or the front-passenger door is
opened.
Using KEYLESS-GO
X
Press the Start/Stop button (Y page 158).
The engine stops and all the indicator
lamps in the instrument cluster go out.
i
If you turn off the engine with the Start/
Stop button, the automatic transmission
shifts to N. If you then open one of the front
doors, the automatic transmission shifts to
P.
i
In the event of an emergency, the engine
can be turned off while the vehicle is in
motion by pressing and holding the Start/
Stop button for three seconds.
Parking brake
G
WARNING
If you must brake the vehicle with the parking
brake, the braking distance is considerably
longer and the wheels could lock. There is an
increased danger of skidding and accidents.
Only use the parking brake to brake the vehi-
cle when the service brake is faulty. Do not
apply the parking brake too firmly. If the
180
Parking
Driving and parking
wheels lock, release the parking brake until
the wheels begin turning again.
G
WARNING
If you leave children unsupervised in the vehi-
cle, they could set it in motion by, for example:
R
release the parking brake.
R
shift the automatic transmission out of the
parking position P.
R
start the engine.
In addition, they may operate vehicle equip-
ment and become trapped. There is a risk of
an accident and injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
If you brake the vehicle with the parking
brake, the brake lamps will not light up.
X
To apply: depress parking brake ; firmly.
When the engine is running, the $ (USA
only) or J (Canada only) indicator lamp
lights up in the instrument cluster.
X
To release: depress the brake pedal and
keep it depressed.
X
Pull release handle :.
When the ignition is switched on or the
engine is running, the $ (USA only) or
J (Canada only) indicator lamp goes out
in the instrument cluster.
Parking the vehicle for a long period
If you leave the vehicle parked for longer than
four weeks, the battery may be damaged by
exhaustive discharging.
If you leave the vehicle parked for longer than
six weeks, the vehicle may suffer damage as a
result of lack of use.
X
Visit a qualified specialist workshop and
seek advice.
i
You can obtain information about trickle
chargers from a qualified specialist work-
shop.
Driving tips
General notes
Important safety notes
G
WARNING
If you switch off the ignition while driving,
safety-relevant functions are only available
with limitations, or not at all. This could affect,
for example, the power steering and the brake
boosting effect. You will require considerably
more effort to steer and brake. There is a risk
of an accident.
Do not switch off the ignition while driving.
G
WARNING
If you operate mobile communication equip-
ment while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate this equipment when the vehicle
is stationary.
Observe the legal requirements for the coun-
try in which you are driving. Some jurisdic-
tions prohibit the driver from using a mobile
phone while driving a vehicle.
If you make a call while driving, always use
hands-free mode. Only operate the telephone
when the traffic situation permits. If you are
Driving tips
181
Driving and parking
Z
unsure, pull over to a safe location and stop
before operating the telephone.
Bear in mind that at a speed of only 30 mph
(approximately 50 km/h), the vehicle covers
a distance of 44 ft (approximately 14 m) per
second.
Drive sensibly save fuel
Observe the following tips to save fuel:
X
The tires should always be inflated to the
recommended tire pressure.
X
Remove unnecessary loads.
X
Remove roof racks when they are not nee-
ded.
X
Warm up the engine at low engine speeds.
X
Avoid frequent acceleration or braking.
X
Have all maintenance work carried out as
indicated by the service intervals in the
Maintenance Booklet or by the service
interval display.
Fuel consumption also increases when driv-
ing in cold weather, in stop-start traffic and in
hilly terrain.
Drinking and driving
G
WARNING
Drinking and driving and/or taking drugs and
driving are very dangerous combinations.
Even a small amount of alcohol or drugs can
affect your reflexes, perceptions and judg-
ment.
The possibility of a serious or even fatal acci-
dent is greatly increased when you drink or
take drugs and drive.
Do not drink or take drugs and drive or allow
anyone to drive who has been drinking or tak-
ing drugs.
Emission control
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Certain engine systems are designed to keep
the level of poisonous components in exhaust
fumes within legal limits.
These systems only work at peak efficiency if
they are serviced exactly in accordance with
the manufacturer's specifications. For this
reason, only have work on the engine carried
out by qualified and authorized Mercedes-
Benz technicians.
The engine settings must not be changed
under any circumstances. Furthermore, all
specific service work must be carried out at
regular intervals and in accordance with the
Mercedes-Benz service requirements. Details
can be found in the Maintenance Booklet.
ECO display
Example: ECO display
The ECO display provides feedback on how
economical your driving characteristics are.
The ECO display assists you in achieving the
most economical driving style for the selec-
ted settings and prevailing conditions. Your
driving style can significantly influence the
vehicle's consumption.
The ECO display consists of three bars:
R
AccelerationAcceleration
R
ConstantConstant
R
CoastingCoasting
The percent value is the average value of the
three bars. The three bars and the mean value
begin at the value of 50%. A higher percent-
182
Driving tips
Driving and parking
age indicates a more economical driving
style.
The ECO display does not indicate the actual
fuel consumption. A fixed percentage count
in the ECO display does not indicate a fixed
consumption.
Apart from driving style, consumption is
dependent on many factors such as, e.g.:
R
load
R
tire pressure
R
cold start
R
choice of route
R
electrical consumers switched on
These factors are not included in the ECO dis-
play.
The evaluation of your driving style is carried
out using the following three categories:
R
AccelerationAcceleration (evaluation of all accelera-
tion processes):
-
The bar fills up: moderate acceleration,
especially at higher speeds
-
The bar empties: sporty acceleration
R
ConstantConstant (assessment of driving behavior
at all times):
-
The bar fills up: constant speed and
avoidance of unnecessary acceleration
and deceleration
-
The bar empties: fluctuations in speed
R
CoastingCoasting (assessment of all deceleration
processes):
-
The bar fills up: anticipatory driving,
keeping your distance and early release
of the accelerator. The vehicle can coast
without use of the brakes.
-
The bar empties: frequent braking
i
An economical driving style specially
requires driving at moderate engine
speeds.
To achieve a higher value in the categories
AccelerationAcceleration and ConstantConstant:
R
observe the gearshift recommendations.
R
drive in drive program E.
i
On long journeys at a constant speed, e.g.
on the highway, only the bar for ConstantConstant
will change.
i
The ECO display summarizes the driving
characteristics from the start of the journey
to its completion. For this reason, the bars
change dynamically at the beginning of the
journey. On longer journeys, there are
fewer changes. For more dynamic changes,
carry out a manual reset.
For further information on the ECO display,
see (Y page 236).
Braking
Important safety notes
G
WARNING
If you shift down on a slippery road surface in
an attempt to increase the engine's braking
effect, the drive wheels could lose their grip.
There is an increased danger of skidding and
accidents.
Do not shift down for additional engine brak-
ing on a slippery road surface.
Downhill gradients
!
On long and steep gradients, you must
reduce the load on the brakes by shifting
early to a lower gear. This allows you to take
advantage of the engine braking effect and
helps avoid overheating and excessive
wear of the brakes.
When you take advantage of the engine
braking effect, a drive wheel may not turn
for some time, e.g. on a slippery road sur-
face. This could cause damage to the drive
train. This type of damage is not covered by
the Mercedes-Benz warranty.
Do not depress the brake pedal continuously
while the vehicle is in motion, e.g. causing the
brakes to rub by constantly applying light
pressure to the pedal. This results in exces-
sive and premature wear to the brake pads.
Driving tips
183
Driving and parking
Z
Heavy and light loads
G
WARNING
If you rest your foot on the brake pedal while
driving, the braking system can overheat. This
increases the stopping distance and can even
cause the braking system to fail. There is a
risk of an accident.
Never use the brake pedal as a footrest. Never
depress the brake pedal and the accelerator
pedal at the same time.
!
Depressing the brake pedal constantly
results in excessive and premature wear to
the brake pads.
If the brakes have been subjected to a heavy
load, do not stop the vehicle immediately, but
drive on for a short while. This allows the air-
flow to cool the brakes more quickly.
Wet roads
If you have driven for a long time in heavy rain
without braking, there may be a delayed reac-
tion from the brakes when braking for the first
time. This may also occur after the vehicle has
been washed or driven through deep water.
You have to depress the brake pedal more
firmly. Maintain a greater distance from the
vehicle in front.
After driving on a wet road or having the vehi-
cle washed, brake firmly while paying atten-
tion to the traffic conditions. This will warm up
the brake discs, thereby drying them more
quickly and protecting them against corro-
sion.
Limited braking performance on salt-
treated roads
If you drive on salted roads, a layer of salt
residue may form on the brake discs and
brake pads. This can result in a significantly
longer braking distance.
R
In order to prevent any salt build-up, apply
the brakes occasionally while paying atten-
tion to the traffic conditions.
R
Carefully depress the brake pedal and the
beginning and end of a journey.
R
Maintain a greater distance to the vehicle
ahead.
Servicing the brakes
!
If the red brake warning lamp lights up in
the instrument cluster and you hear a warn-
ing tone while the engine is running, the
brake fluid level may be too low. Observe
additional warning messages in the multi-
function display.
The brake fluid level may be too low due to
brake pad wear or leaking brake lines.
Have the brake system checked immedi-
ately. This work should be carried out at a
qualified specialist workshop.
!
Vehicles with 4MATIC: function or per-
formance tests may only be carried out on
a 2-axle dynamometer. If you are planning
to have the vehicle tested on such a dyna-
mometer, contact an authorized Mercedes-
Benz Center to obtain further information
first. Otherwise, you could damage the
drive train or the brake system.
!
Vehicles with 4MATIC: as the ESP
®
sys-
tem operates automatically, the engine and
the ignition must be switched off (Smart-
Key in position 0 or 1 in the ignition lock or
Start/Stop button in position 0 or 1) while
the parking brake is being tested on a brake
dynamometer.
Braking maneuvers triggered automatically
by ESP
®
may seriously damage the brake
system.
184
Driving tips
Driving and parking
!
Vehicles with 4MATIC: as the ESP
®
sys-
tem operates automatically, the engine and
the ignition system must be switched off
(SmartKey in position 0 or 1 in the ignition
lock or Start/Stop button in position 0 or 1)
when:
R
testing the parking brake on a brake
dynamometer.
R
you intend to have the vehicle towed with
one of the axles raised.
Braking maneuvers triggered automatically
by ESP
®
may seriously damage the brake
system.
All checks and maintenance work on the
brake system must be carried out at a quali-
fied specialist workshop. Consult a qualified
specialist workshop to arrange this.
Have brake pads installed and brake fluid
replaced at a qualified specialist workshop.
If the brake system has only been subject to
moderate loads, you should test the function-
ality of your brakes at regular intervals. To do
so, press firmly on the brake pedal when driv-
ing at a high speed. This improves the grip of
the brake pads.
You can find a description of Brake Assist
(BAS) at (Y page 70) or of BAS PLUS with
Intersection Assist at (Y page 70).
The braking characteristics of the vehicle can
be seriously impaired if:
R
brake pads other than those recommended
are installed
R
the recommended brake fluid is not used
Safe braking can no longer be guaranteed.
AMG high-performance and ceramic
brakes
The high-performance brake system is only
available on AMG vehicles.
The AMG brake systems are designed for
heavy loads. This may lead to noise when
braking. This will depend on:
R
speed
R
braking force
R
environmental conditions, such as temper-
ature and humidity
The wear of individual components of the
brake system, such as the brake pads/linings
or brake discs, depends on the individual driv-
ing style and operating conditions.
For this reason, it is impossible to state a
mileage that will be valid under all circum-
stances. An aggressive driving style will lead
to high wear. You can obtain further informa-
tion about this from your authorized
Mercedes-Benz Center.
New and replaced brake pads and discs only
reach their optimum braking effect after sev-
eral hundred kilometers of driving. Compen-
sate for this by applying greater force to the
brake pedal. Keep this in mind, and adapt
your driving and braking accordingly during
this break-in period.
Excessive heavy braking results in corre-
spondingly high brake wear. Observe the
brake wear warning lamp in the instrument
cluster and note any brake status messages
in the multifunction display. Especially for
high performance driving, it is important to
maintain and have the brake system checked
regularly.
Driving on wet roads
Hydroplaning
If water has accumulated to a certain depth
on the road surface, there is a danger of
hydroplaning occurring, even if:
R
you drive at low speeds.
R
the tires have adequate tread depth.
Driving tips
185
Driving and parking
Z
For this reason, in the event of heavy rain or in
conditions in which hydroplaning may occur,
you must drive in the following manner:
R
lower your speed.
R
avoid ruts.
R
avoid sudden steering movements.
R
brake carefully.
Driving on flooded roads
!
Do not drive through flooded areas.
Check the depth of any water before driving
through it. Drive slowly through standing
water. Otherwise, water may enter the
vehicle interior or the engine compartment.
This can damage the electronic compo-
nents in the engine or the automatic trans-
mission. Water can also be drawn in by the
engine's air suction nozzles and this can
cause engine damage.
Winter driving
G
WARNING
If you shift down on a slippery road surface in
an attempt to increase the engine's braking
effect, the drive wheels could lose their grip.
There is an increased danger of skidding and
accidents.
Do not shift down for additional engine brak-
ing on a slippery road surface.
G
DANGER
If the exhaust pipe is blocked or adequate
ventilation is not possible, poisonous gases
such as carbon monoxide (CO) may enter the
vehicle. This is the case, e.g. if the vehicle
becomes trapped in snow. There is a risk of
fatal injury.
If you leave the engine or the auxiliary heating
running, make sure the exhaust pipe and area
around the vehicle are clear of snow. To
ensure an adequate supply of fresh air, open a
window on the side of the vehicle that is not
facing into the wind.
Have your vehicle winter-proofed at a quali-
fied specialist workshop at the onset of win-
ter.
Drive particularly carefully on slippery road
surfaces. Avoid sudden acceleration, steering
and braking maneuvers. Do not use the cruise
control or DISTRONIC PLUS.
If the vehicle threatens to skid or cannot be
stopped when moving at low speed:
X
Shift the transmission to position N.
i
Vehicles with a diesel engine: do not
cover the radiator, e.g. with a protective
cover. The measuring function of the
onboard diagnosis system may otherwise
provide inaccurate values. Some of these
values are required by law and must there-
fore always be accurate.
The outside temperature indicator is not
designed to serve as an ice-warning device
and is therefore unsuitable for that purpose.
Changes in the outside temperature are dis-
played after a short delay.
Indicated temperatures just above the freez-
ing point do not guarantee that the road sur-
face is free of ice. The road may still be icy,
especially in wooded areas or on bridges. The
vehicle could skid if you fail to adapt your
driving style. Always adapt your driving style
and drive at a speed to suit the prevailing
weather conditions.
You should pay special attention to road con-
ditions when temperatures are around freez-
ing point.
For more information on driving with snow
chains, see (Y page 365).
For more information on driving with summer
tires, see (Y page 364).
Observe the notes in the "Winter operation"
section (Y page 364).
186
Driving tips
Driving and parking
Driving systems
Mercedes-Benz Intelligent Drive
Mercedes-Benz Intelligent Drive stands for
innovative driver assistance and safety sys-
tems which enhance comfort and support the
driver in critical situations. With these intelli-
gent co-ordinated systems Mercedes-Benz
has set a milestone on the path towards
autonomous driving.
Mercedes-Benz Intelligent Drive embraces all
elements of active and passive safety in one
well thought out system for the safety of the
vehicle occupants and that of other road
users.
Further information on driving safety systems
(Y page 69).
Cruise control
General notes
Cruise control maintains a constant road
speed for you. It brakes automatically in order
to avoid exceeding the set speed. On long and
steep downhill gradients, especially if the
vehicle is laden, you must shift to a lower gear
in time. By doing so, you will make use of the
braking effect of the engine. This relieves the
load on the brake system and prevents the
brakes from overheating and wearing too
quickly.
Use cruise control only if road and traffic con-
ditions make it appropriate to maintain a
steady speed for a prolonged period. You can
store any road speed above 20 mph
(30 km/h).
Important safety notes
If you fail to adapt your driving style, cruise
control can neither reduce the risk of an acci-
dent nor override the laws of physics. Cruise
control cannot take into account the road,
traffic and weather conditions. Cruise control
is only an aid. You are responsible for the dis-
tance to the vehicle in front, for vehicle speed,
for braking in good time and for staying in
your lane.
Do not use cruise control:
R
in road and traffic conditions which do not
allow you to maintain a constant speed e.g.
in heavy traffic or on winding roads
R
on slippery road surfaces. Braking or accel-
erating could cause the drive wheels to lose
traction and the vehicle could then skid
R
when there is poor visibility, e.g. due to fog,
heavy rain or snow
If there is a change of drivers, advise the new
driver of the speed stored.
Cruise control lever
:
To activate or increase speed
;
To activate or reduce speed
=
To deactivate cruise control
?
To activate at the current speed/last
stored speed
When you activate cruise control, the stored
speed is shown in the multifunction display
for five seconds.
Activation conditions
To activate cruise control, all of the following
activation conditions must be fulfilled:
R
the parking brake must be released.
R
you are driving faster than 20 mph
(30 km/h).
R
ESP
®
must be active, but not intervening.
R
the transmission must be in position D.
Driving systems
187
Driving and parking
Z
Storing and maintaining the current
speed
You can accept the current speed if you are
driving faster than 20 mph (30 km/h).
X
Accelerate the vehicle to the desired
speed.
X
Briefly press the cruise control lever up :
or down ;.
X
Remove your foot from the accelerator
pedal.
Cruise control is activated. The vehicle
automatically maintains the stored speed.
i
Cruise control may be unable to maintain
the stored speed on uphill gradients. The
stored speed is resumed when the gradient
evens out. Cruise control maintains the
stored speed on downhill gradients by
automatically applying the brakes.
Storing the current speed or calling up
the last stored speed
G
WARNING
If you call up the stored speed and it is lower
than the current speed, the vehicle deceler-
ates. If you do not know the stored speed, the
vehicle could decelerate unexpectedly. There
is a risk of an accident.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
X
Briefly pull the cruise control lever towards
you :.
X
Remove your foot from the accelerator
pedal.
The first time cruise control is activated, it
stores the current speed or regulates the
speed of the vehicle to the previously
stored speed.
Setting a speed
X
Press the cruise control lever up : for a
higher speed or down ; for a lower speed.
X
To adjust the set speed in 1 mph incre-
ments (1 km/h increments): briefly
press the cruise control lever up : or
down ; to the pressure point.
Every time the cruise control lever is
pressed up : or down ; the last speed
stored is increased or reduced.
X
To adjust the set speed in 5 mph incre-
ments (10 km/h increments): briefly
press the cruise control lever up : or
down ; to the pressure point.
Every time the cruise control lever is
pressed up : or down ; the last speed
stored is increased or reduced.
i
Cruise control is not deactivated if you
depress the accelerator pedal. For exam-
ple, if you accelerate briefly to overtake,
cruise control adjusts the vehicle's speed
to the last speed stored after you have fin-
ished overtaking.
188
Driving systems
Driving and parking
Deactivating cruise control
There are several ways to deactivate cruise
control:
X
Briefly press the cruise control lever for-
wards :.
or
X
Brake.
Cruise control is automatically deactivated if:
R
you depress the parking brake
R
you are driving at less than 20 mph
(30 km/h)
R
ESP
®
intervenes or you deactivate ESP
®
R
you shift the transmission to position N
while driving
If cruise control is deactivated, you will hear a
warning tone. You will see the Cruise Con‐Cruise Con‐
trol Offtrol Off message in the multifunction dis-
play for approximately five seconds.
i
When you switch off the engine, the last
speed stored is cleared.
DISTRONIC PLUS
General notes
DISTRONIC PLUS regulates the speed and
automatically helps you maintain the dis-
tance to the vehicle detected in front. Vehi-
cles are detected with the aid of the radar
sensor system. DISTRONIC PLUS brakes
automatically so that the set speed is not
exceeded.
Change into a lower gear in good time on long
and steep downhill gradients. This is espe-
cially important if the vehicle is laden. By
doing so, you will make use of the braking
effect of the engine. This relieves the load on
the brake system and prevents the brakes
from overheating and wearing too quickly.
If DISTRONIC PLUS detects that there is a risk
of a collision, you will be warned visually and
acoustically. DISTRONIC PLUS cannot pre-
vent a collision without your intervention. An
intermittent warning tone will then sound and
the distance warning lamp will light up in the
instrument cluster. Brake immediately in
order to increase the distance to the vehicle
in front or take evasive action provided it is
safe to do so.
For DISTRONIC PLUS to assist you, the radar
sensor system must be operational.
DISTRONIC PLUS operates in range between
0 mph (0 km/h) and 120 mph (200 km/h).
Do not use DISTRONIC PLUS while driving on
roads with steep gradients.
As DISTRONIC PLUS transmits radar waves, it
can resemble the radar detectors of the
responsible authorities. You can refer to the
relevant chapter in the Operator's Manual if
questions are asked about this.
i
USA only: This device has been approved
by the FCC as a "Vehicular Radar System".
The radar sensor is intended for use in an
automotive radar system only. Removal,
tampering, or altering of the device will void
any warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
i
Canada only: This device complies with
RSS-210 of Industry Canada. Operation is
subject to the following two conditions:
1. This device may not cause harmful inter-
ference, and
Driving systems
189
Driving and parking
Z
2. This device must accept any interference
received, including interference that may
cause undesired operation of the device.
Removal, tampering, or altering of the
device will void any warranties, and is not
permitted. Do not tamper with, alter, or use
in any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Important safety notes
G
WARNING
Hybrid vehicles: be sure to read the "HYBRID"
supplement. Otherwise, you could fail to rec-
ognize dangers.
G
WARNING
DISTRONIC PLUS does not react to:
R
people or animals
R
stationary obstacles on the road, e.g. stop-
ped or parked vehicles
R
oncoming and crossing traffic
As a result, DISTRONIC PLUS may neither give
warnings nor intervene in such situations.
There is a risk of an accident.
Always pay careful attention to the traffic sit-
uation and be ready to brake.
G
WARNING
DISTRONIC PLUS cannot always clearly iden-
tify other road users and complex traffic sit-
uations.
In such cases, DISTRONIC PLUS may:
R
give an unnecessary warning and then
brake the vehicle
R
neither give a warning nor intervene
R
accelerate or brake unexpectedly
There is a risk of an accident.
Continue to drive carefully and be ready to
brake, in particular when warned to do so by
DISTRONIC PLUS.
G
WARNING
DISTRONIC PLUS brakes your vehicle with up
to 50% of the maximum possible deceleration.
If this braking force is insufficient, DISTRONIC
PLUS warns you visually and audibly. There is
a risk of an accident.
In such cases, apply the brakes yourself and
try to take evasive action.
!
If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations. To prevent dam-
age to the vehicle, deactivate DISTRONIC
PLUS and the HOLD function in the follow-
ing or other similar situations:
R
when towing the vehicle
R
in the car wash
If you fail to adapt your driving style,
DISTRONIC PLUS can neither reduce the risk
of accident nor override the laws of physics.
DISTRONIC PLUS cannot take into account
the road, traffic and weather conditions.
DISTRONIC PLUS is only an aid. You are
responsible for the distance to the vehicle in
front, for vehicle speed, for braking in good
time and for staying in your lane.
Do not use DISTRONIC PLUS:
R
in road and traffic conditions which do not
allow you to maintain a constant speed, e.g.
in heavy traffic or on winding roads
R
on slippery road surfaces. Braking or accel-
erating could cause the drive wheels to lose
traction and the vehicle could then skid
R
when there is poor visibility, e.g. due to fog,
heavy rain or snow
DISTRONIC PLUS may not detect narrow
vehicles driving in front, e.g. motorcycles, or
vehicles driving on a different line.
In particular, the detection of obstacles can
be impaired if:
R
there is dirt on the sensors or anything else
covering the sensors
R
there is snow or heavy rain
190
Driving systems
Driving and parking
R
there is interference by other radar sources
R
there are strong radar reflections, for
example, in parking garages
If DISTRONIC PLUS no longer detects a vehi-
cle in front, DISTRONIC PLUS may unexpect-
edly accelerate the vehicle to the stored
speed.
This speed may:
R
be too high if you are driving in a filter lane
or an exit lane
R
be so high in the right lane that you pass
vehicles driving on the left (left-hand drive
countries)
R
be so high in the left lane that you pass
vehicles driving on the right (right-hand
drive countries)
If there is a change of drivers, advise the new
driver of the speed stored.
Cruise control lever
:
To store the current speed or a higher
speed
;
To store the current speed or a lower
speed
=
To deactivate DISTRONIC PLUS
?
To store the current speed or call up the
last stored speed
A
To set the specified minimum distance
Activating DISTRONIC PLUS
Activation conditions
In order to activate DISTRONIC PLUS, the fol-
lowing conditions must be fulfilled:
R
the engine must be started. It may take up
to two minutes after pulling away before
DISTRONIC PLUS is operational.
R
the parking brake must be released.
R
ESP
®
must be active, but not intervening.
R
Active Parking Assist must not be activa-
ted.
R
the transmission must be in position D.
R
the driver's door must be closed when you
shift from P to D or your seat belt must be
fastened.
R
the front-passenger door and rear doors
must be closed.
R
the vehicle must not skid.
Activating
X
Briefly pull the cruise control lever towards
you ; or press it up : or down =.
DISTRONIC PLUS is selected.
X
Press the cruise control lever repeatedly
up : or down = until the desired speed is
set.
X
Remove your foot from the accelerator
pedal.
Your vehicle adapts its speed to that of the
vehicle in front, but only up to the desired
stored speed.
Driving systems
191
Driving and parking
Z
If the vehicle in front of you is stationary, you
can only activate DISTRONIC PLUS once your
vehicle is stationary as well.
i
If you do not fully release the accelerator
pedal, the DISTRONIC PLUS OverrideDISTRONIC PLUS Override
message appears in the multifunction dis-
play. The set distance to a slower-moving
vehicle in front will then not be maintained.
You will be driving at the speed you deter-
mine by the position of the accelerator
pedal.
You can also activate DISTRONIC PLUS when
stationary. The lowest speed that can be set is
18 mph (30 km/h).
X
Briefly pull the cruise control lever towards
you ; up : or down = .
DISTRONIC PLUS is selected.
Activating at the current speed/last
stored speed
G
WARNING
If you call up the stored speed and it differs
from the current speed, the vehicle acceler-
ates or decelerates. If you do not know the
stored speed, the vehicle could accelerate or
brake unexpectedly. There is a risk of an acci-
dent.
Pay attention to the road and traffic condi-
tions before calling up the stored speed. If you
do not know the stored speed, store the
desired speed again.
X
Briefly pull the cruise control lever towards
you :.
X
Remove your foot from the accelerator
pedal.
DISTRONIC PLUS is activated. The first
time it is activated, the current speed is
stored. Otherwise, it sets the vehicle cruise
speed to the previously stored value.
Driving with DISTRONIC PLUS
Pulling away and driving
X
If you want to pull away with
DISTRONIC PLUS: remove your foot from
the brake pedal.
X
Briefly pull the cruise control lever towards
you :.
or
X
Accelerate briefly.
Your vehicle pulls away and adapts its
speed to that of the vehicle in front.
If no vehicle is detected in front, your vehi-
cle accelerates to the set speed.
i
The vehicle can also pull away when it is
facing an unidentified obstacle or is driving
on a different line from another vehicle. The
vehicle then brakes automatically. There is
a risk of an accident. Be ready to brake at all
times.
If there is no vehicle in front, DISTRONIC
PLUS operates in the same way as cruise
control.
If DISTRONIC PLUS detects that the vehicle in
front has slowed down, it brakes your vehicle.
192
Driving systems
Driving and parking
In this way, the distance you have selected is
maintained.
If DISTRONIC PLUS detects a faster-moving
vehicle in front, it increases the driving speed.
However, the vehicle is only accelerated up to
the speed you have stored.
Selecting the drive program
DISTRONIC PLUS supports a sporty driving
style when you have selected the S or M (AMG
vehicles: S, S+ or M) driving program
(Y page 169). Acceleration behind the vehicle
in front or to the set speed is then noticeably
more dynamic. If you have selected the E or E
+ (AMG vehicles: C) driving program, the vehi-
cle accelerates more gently. This setting is
recommended in stop-and-start traffic.
Changing lanes
If you change to the passing lane, DISTRONIC
PLUS supports you when:
R
you are driving faster than 45 mph
(70 km/h)
R
DISTRONIC PLUS is maintaining the dis-
tance to a vehicle in front
R
you have switched on the corresponding
turn signal
R
DISTRONIC PLUS does not detect a danger
of collision
If these conditions are fulfilled, your vehicle is
accelerated. Acceleration will be interrupted
if changing lanes takes too long or if the dis-
tance between your vehicle and the vehicle in
front becomes too small.
i
When changing lanes, DISTRONIC PLUS
monitors the left lane on left-hand drive
vehicles and the right lane on right-hand
drive vehicles.
Stopping
G
WARNING
When leaving the vehicle, even if it is braked
only by DISTRONIC PLUS, it could roll away if:
R
there is a malfunction in the system or in
the voltage supply.
R
DISTRONIC PLUS has been deactivated
with the cruise control lever, e.g. by a vehi-
cle occupant or from outside the vehicle.
R
the electrical system in the engine com-
partment, the battery or the fuses have
been tampered with.
R
the battery is disconnected.
R
the accelerator pedal has been depressed,
e.g. by a vehicle occupant.
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
DISTRONIC PLUS and secure the vehicle
against rolling away.
For further information on deactivating
DISTRONIC PLUS (Y page 196).
If DISTRONIC PLUS detects that the vehicle in
front is stopping, it brakes your vehicle until it
is stationary.
Once your vehicle is stationary, it remains
stationary and you do not need to depress the
brake.
Depending on the specified minimum dis-
tance, your vehicle will come to a standstill at
a sufficient distance behind the vehicle in
front. The specified minimum distance is set
using the control on the cruise control lever.
When DISTRONIC PLUS is activated, the
transmission is shifted automatically to posi-
tion P if:
R
the driver's door is open and the driver's
seat belt is unfastened.
R
the engine is switched off, unless it is auto-
matically switched off by the ECO start/
stop function.
R
a system malfunction occurs.
R
the power supply is not sufficient.
Driving systems
193
Driving and parking
Z
Setting a speed
X
Press the cruise control lever up : for a
higher speed or down ; for a lower speed.
X
To adjust the set speed in 1 mph incre-
ments (1 km/h increments): briefly
press the cruise control lever up : or
down ; to the pressure point.
Every time the cruise control lever is
pressed up : or down ;, the last speed
stored is increased or reduced.
X
To adjust the set speed in 5 mph incre-
ments (10 km/h increments): briefly
press the cruise control lever up : or
down ; to the pressure point.
Every time the cruise control lever is
pressed up : or down ;, the last speed
stored is increased or reduced.
i
If you accelerate to overtake, DISTRONIC
PLUS adjusts the vehicle's speed to the last
speed stored after you have finished over-
taking.
Setting the specified minimum distance
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
DISTRONIC PLUS keeps to the vehicle in
front, dependent on vehicle speed. You can
see this distance in the multifunction display
(Y page 195).
i
Make sure that you maintain a sufficient
distance to the vehicle in front and comply
with the minimum distance as required by
law. Adjust the distance to the vehicle in
front if necessary.
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
DISTRONIC PLUS keeps to the vehicle in
front, dependent on vehicle speed. You can
see this distance in the multifunction display
(Y page 195).
X
To increase: turn control ; in direction
=.
DISTRONIC PLUS then maintains a greater
distance between your vehicle and the
vehicle in front.
X
To decrease: turn control ; in direc-
tion :.
DISTRONIC PLUS then maintains a shorter
distance between your vehicle and the
vehicle in front.
194
Driving systems
Driving and parking
DISTRONIC PLUS displays in the speed-
ometer
Example: vehicles featuring automatic transmis-
sion with a DIRECT SELECT lever
When DISTRONIC PLUS is activated, one or
two segments ; in the set speed range light
up.
If DISTRONIC PLUS detects a vehicle in front,
segments ; between speed of the vehicle in
front : and stored speed = light up.
i
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
DISTRONIC PLUS displays in the multi-
function display
General notes
In the Assistance menu (Y page 240) of the
on-board computer, you can select the assis-
tance display.
Display when DISTRONIC PLUS is deacti-
vated
:
Vehicle in front, if detected
;
Distance indicator, current distance to
the vehicle in front
=
Specified minimum distance to the vehi-
cle in front; adjustable
?
Own vehicle
X
Select the Assistance GraphicAssistance Graphic function
using the on-board computer
(Y page 241).
Display when DISTRONIC PLUS is activa-
ted
:
Vehicle in front, if detected
;
Specified minimum distance to the vehi-
cle in front; adjustable
=
Own vehicle
?
DISTRONIC PLUS active (text only
appears when the cruise control lever is
actuated)
X
Select the Assistance GraphicAssistance Graphic function
using the on-board computer
(Y page 241).
Driving systems
195
Driving and parking
Z
i
You will see the stored speed for about
five seconds when you activate DISTRONIC
PLUS.
Deactivating DISTRONIC PLUS
There are several ways to deactivate
DISTRONIC PLUS:
X
Briefly press the cruise control lever for-
wards :.
or
X
Brake, unless the vehicle is stationary
When you deactivate DISTRONIC PLUS, you
will see the DISTRONIC PLUS OffDISTRONIC PLUS Off message
in the multifunction display for approximately
five seconds.
i
The last speed stored remains stored until
you switch off the engine.
i
DISTRONIC PLUS is not deactivated if you
depress the accelerator pedal.
DISTRONIC PLUS is automatically deactiva-
ted if:
R
you engage the parking brake
R
ESP
®
intervenes or you deactivate ESP
®
R
the transmission is in the P, R or N position
R
you pull the cruise control lever towards
you in order to pull away and the front-
passenger door or one of the rear doors is
open
R
the vehicle is skidding
R
you activate Active Parking Assist
If DISTRONIC PLUS is deactivated, you will
hear a warning tone. You will see the
DISTRONIC PLUS OffDISTRONIC PLUS Off message in the multi-
function display for approximately five sec-
onds.
Tips for driving with DISTRONIC PLUS
General notes
Pay particular attention in the following traffic
situations:
R
Cornering, going into and coming out of a
bend
R
Vehicles traveling on a different line
R
Other vehicles changing lanes
R
Narrow vehicles
R
Obstructions and stationary vehicles
R
Crossing vehicles
In such situations, brake if necessary.
DISTRONIC PLUS is then deactivated.
Cornering, going into and coming out of a
bend
The ability of DISTRONIC PLUS to detect vehi-
cles when cornering is limited. Your vehicle
may brake unexpectedly or late.
196
Driving systems
Driving and parking
Vehicles traveling on a different line
DISTRONIC PLUS may not detect vehicles
traveling on a different line. The distance to
the vehicle in front will be too short.
Other vehicles changing lanes
DISTRONIC PLUS has not detected the vehi-
cle cutting in yet. The distance to this vehicle
will be too short.
Narrow vehicles
DISTRONIC PLUS has not yet detected the
vehicle in front on the edge of the road,
because of its narrow width. The distance to
the vehicle in front will be too short.
Obstructions and stationary vehicles
DISTRONIC PLUS does not brake for obsta-
cles or stationary vehicles. If, for example, the
detected vehicle turns a corner and reveals
an obstacle or stationary vehicle, DISTRONIC
PLUS will not brake for these.
Crossing vehicles
DISTRONIC PLUS may mistakenly detect
vehicles that are crossing your lane. Activat-
ing DISTRONIC PLUS at traffic lights with
crossing traffic, for example, could cause
your vehicle to pull away unintentionally.
Driving systems
197
Driving and parking
Z
DISTRONIC PLUS with Steering Assist
and Stop&Go Pilot
General notes
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot aids you in keeping the vehicle
in the center of the driving lane by means of
moderate steering interventions in the speed
range from 0 - 125 mph (0 - 200 km/h).
It monitors the area in front of your vehicle by
means of multifunction camera :, at the top
of the windshield.
At speeds of 0 - 37 mph (0 - 60 km/h),
Stop&Go Pilot focuses on the vehicle in front,
taking into account lane markings, e.g. when
following vehicles in a traffic jam.
At speeds of more than 37 mph (60 km/h)
Steering Assist focuses on detected lane
markings (left and right), and only on the vehi-
cle in front if lane markings are missing.
If these conditions are not present, Steering
Assist and Stop&Go Pilot cannot provide
assistance.
DISTRONIC PLUS must be active in order for
the function to be available.
Important safety notes
If you fail to adapt your driving style,
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot can neither reduce the risk of
an accident nor override the laws of physics.
It cannot take account of road, weather and
traffic conditions. DISTRONIC PLUS with
Steering Assist and Stop&Go Pilot is only an
aid. You are responsible for the distance to
the vehicle in front, for vehicle speed, for
braking in good time and for staying in your
lane.
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot does not detect road and traf-
fic conditions. If you are following a vehicle
which is driving towards the edge of the road,
your vehicle could come into contact with the
curb or other road boundaries. Be particularly
aware of other road users, e.g. cyclists, that
are directly next to your vehicle.
Obstacles such as building site huts on the
lane or projecting out into the lane are not
detected.
An inappropriate steering intervention, e.g.
after intentionally driving over a lane marking,
can be corrected at any time if you steer
slightly in the opposite direction.
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot cannot continuously keep your
vehicle in lane. In some cases, the steering
intervention is not sufficient to bring the vehi-
cle back to the lane. In such cases, you must
steer the vehicle yourself to ensure that it
does not leave the lane.
The support provided by the system can be
impaired if:
R
there is poor visibility, e.g. due to insuffi-
cient illumination of the road, or due to
snow, rain, fog or spray
R
there is glare, e.g. from oncoming traffic,
the sun or reflections (e.g. when the road
surface is wet)
R
the windshield is dirty, fogged up, damaged
or covered, for instance by a sticker, in the
vicinity of the camera
R
no, or several, unclear lane markings are
present for one lane, e.g. in a construction
area
R
the lane markings are worn away, dark or
covered up, e.g. by dirt or snow
R
the distance to the vehicle in front is too
small and the lane markings thus cannot be
detected
198
Driving systems
Driving and parking
R
the lane markings change quickly, e.g.
lanes branch off, cross one another or
merge
R
the road is narrow and winding
R
there are strong shadows cast on the road
The system is switched to passive and no lon-
ger assists you by performing steering inter-
ventions if:
R
you actively change lanes
R
you switch on the turn signal
R
take your hands off the steering wheel or do
not steer for a prolonged period of time
i
After you have finished changing lanes,
Steering Assist and Stop&Go Pilot are auto-
matically active again.
DISTRONIC PLUS Steering Assist does not
provide assistance:
R
on very sharp corners
R
when a loss of tire pressure or a defective
tire has been detected and displayed.
Pay attention also to the important safety
notes for DISTRONIC PLUS (Y page 190).
The steering interventions are carried out
with a limited steering moment. The system
requires the driver to keep his hands on the
steering wheel and to steer himself.
If you do not steer yourself or if you take your
hands off the steering wheel for a prolonged
period of time, the system will first alert you
with a visual warning. A steering wheel sym-
bol appears in the multifunction display. If you
have still not started to steer and have not
taken hold of the steering wheel after five
seconds at the latest, a warning tone also
sounds to remind you to take control of the
vehicle. Steering Assist and Stop&Go Pilot are
switched to passive. DISTRONIC PLUS
remains active.
Activating Steering Assist and Stop&Go
Pilot
X
Activate the DISTRONIC PLUS with Steer-
ing Assist and Stop&Go Pilot function using
the on-board computer (Y page 242).
The DTR+:DTR+: SteeringSteering AssistantAssistant OnOn mes-
sage appears in the multifunction display.
Steering Assist and Stop&Go Pilot are
active.
Information in the multifunction display
If Steering Assist and Stop&Go Pilot are acti-
vated but not ready for a steering interven-
tion, steering wheel symbol : appears in
gray. If the system provides you with support
by means of steering interventions, sym-
bol : is shown in green.
Deactivating Steering Assist and Stop&Go
Pilot
X
Deactivate the DISTRONIC PLUS with
Steering Assist and Stop&Go Pilot function
using the on-board computer
(Y page 242).
The DTR+: Steering Assistant OffDTR+: Steering Assistant Off
message appears in the multifunction dis-
play.Steering Assist and Stop&Go Pilot are
deactivated.
When DISTRONIC PLUS is deactivated or not
available, Steering Assist and Stop&Go Pilot
are deactivated automatically.
Driving systems
199
Driving and parking
Z
HOLD function
General notes
The HOLD function can assist the driver in the
following situations:
R
when pulling away, especially on steep
slopes
R
when maneuvering on steep slopes
R
when waiting in traffic
The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.
Important safety notes
G
WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if:
R
there is a malfunction in the system or in
the voltage supply.
R
the HOLD function has been deactivated by
pressing the accelerator pedal or the brake
pedal, e.g. by a vehicle occupant.
R
the electrical system in the engine com-
partment, the battery or the fuses have
been tampered with.
R
the battery is disconnected
There is a risk of an accident.
If you wish to exit the vehicle, always turn off
the HOLD function and secure the vehicle
against rolling away.
!
If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations. To prevent dam-
age to the vehicle, deactivate DISTRONIC
PLUS and the HOLD function in the follow-
ing or other similar situations:
R
when towing the vehicle
R
in the car wash
Activation conditions
You can activate the HOLD function if:
R
the vehicle is stationary
R
the engine is running or if it has been auto-
matically switched off by the ECO start/
stop function
R
the driver's door is closed or your seat belt
is fastened
R
the parking brake is released
R
the transmission is in position D, R or N
R
DISTRONIC PLUS is deactivated
Activating the HOLD function
X
Make sure that the activation conditions
are met.
X
Depress the brake pedal.
X
Quickly depress the brake pedal further
until ë : appears in the multifunction
display.
The HOLD function is activated. You can
release the brake pedal.
i
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
Deactivating the HOLD function
The HOLD function is deactivated automati-
cally if:
R
you accelerate and the transmission is in
position D or R.
R
you shift the transmission to position P.
R
you depress the brake pedal again with a
certain amount of pressure until ë dis-
appears from the multifunction display.
R
you activate DISTRONIC PLUS.
200
Driving systems
Driving and parking
When the HOLD function is activated, the
transmission is shifted automatically to posi-
tion P if:
R
the driver's door is open and the driver's
seat belt is unfastened.
R
the engine is switched off, unless it is auto-
matically switched off by the ECO start/
stop function.
R
a system malfunction occurs.
R
the power supply is not sufficient.
RACE START
Important safety notes
i
Observe the safety notes for the SPORT
handling mode (Y page 76).
RACE START is intended solely for activation
on dedicated race circuits.
RACE START enables optimal acceleration
from a standing start. The precondition for
this is a suitable high-grip road surface.
i
RACE START is only available in AMG vehi-
cles.
Conditions for activation
You can activate RACE START if:
R
the doors are closed.
R
the engine is running and it has reached an
operating temperature of approximately
176 (80 †). This is the case when the
engine oil temperature in the multifunction
display stops flashing.
R
SPORT handling mode is activated.
(Y page 76)
R
the steering wheel is in the straight-ahead
position.
R
the vehicle is stationary and the brake
pedal is depressed (left foot).
R
the transmission is in position D.
Activating RACE START
X
Depress the brake pedal with your left foot
and keep it depressed.
X
Turn the drive program selector clockwise
(Y page 169) until the RS lamp lights up.
The RACE START Confirm: Paddle UPRACE START Confirm: Paddle UP
Cancel: Paddle DOWNCancel: Paddle DOWN message appears
in the multifunction display.
i
If the activation conditions are no longer
fulfilled, RACE START is canceled. The
RACE START CanceledRACE START Canceled message appears
in the multifunction display.
X
To cancel: pull the left steering wheel pad-
dle shifter (Y page 170).
or
X
To confirm: pull the right steering wheel
paddle shifter (Y page 170).
The RACE START Available DepressRACE START Available Depress
gas pedalgas pedal message appears in the multi-
function display.
i
If you do not depress the accelerator
pedal fully within two seconds, RACE
START is canceled. The RACE START NotRACE START Not
PossiblePossible SeeSee Operator'sOperator's ManualManual mes-
sage appears in the multifunction display.
X
Fully depress the accelerator pedal.
The engine speed rises to approximately
3,500 rpm.
The RACE START Release brake toRACE START Release brake to
startstart message appears in the multifunc-
tion display.
i
If you do not release the brake pedal
within five seconds, RACE START is can-
celed. The RACE START CanceledRACE START Canceled mes-
sage appears in the multifunction display.
X
Take your foot off the brake, but keep the
accelerator pedal depressed.
The vehicle pulls away at maximum accel-
eration.
The RACERACE STARTSTART ActiveActive message appears
in the multifunction display.
RACE START is deactivated when the vehicle
reaches a speed of approximately 30 mph
(Canada: 50 km/h). Drive program S+ is acti-
Driving systems
201
Driving and parking
Z
vated. SPORT handling mode remains activa-
ted.
RACE START is deactivated immediately if
you release the accelerator pedal during
RACE START or if any of the activation condi-
tions are no longer fulfilled. The RACERACE STARTSTART
Not Possible See Operator's ManualNot Possible See Operator's Manual
message appears in the multifunction dis-
play.
i
If RACE START is used repeatedly within a
short period of time, it is only available
again after the vehicle has been driven a
certain distance.
AIRMATIC
Vehicle level
Important safety notes
G
WARNING
When the vehicle is being lowered, people
could become trapped if their limbs are
between the vehicle body and the wheels or
underneath the vehicle. There is a risk of
injury.
Make sure no one is underneath the vehicle or
in the immediate vicinity of the wheel arches
when the vehicle is being lowered.
G
WARNING
Vehicles with level control:
The vehicle is slightly lowered if:
R
you have selected comfort suspension tun-
ing and
R
you lock the vehicle within approximately
60 seconds of switching off the engine
You and people in the vicinity of the wheel
arch or the underbody may thus become trap-
ped. There is a risk of injury.
Make sure that nobody is in the vicinity of the
wheel arch or the underbody when you lock
the vehicle.
!
The vehicle is lowered by about 15 mm if:
R
you have selected "Comfort tuning"
R
you switch off the engine and then
R
you lock the vehicle within approximately
60 seconds
When parking, position your vehicle so that
it does not make contact with the curb as
the vehicle is lowered. Your vehicle could
otherwise be damaged.
If you unlock the vehicle within 60 seconds of
having switched the engine off, the vehicle is
lowered slightly when Comfort suspension
mode is selected.
Setting the vehicle level
Select the "Normal" setting for normal road
surfaces and "Raised" for driving with snow
chains or on particularly poor road surfaces.
Your selection remains stored even if you
remove the SmartKey from the ignition lock.
Setting raised level
X
Start the engine.
If indicator lamp : is not lit:
X
Press button ;.
Indicator lamp : lights up. The vehicle
height is adjusted to raised level.
The Vehicle RisingVehicle Rising message appears in
the display.
The "Raised level" setting is canceled if you:
R
drive at a speed over approximately 75 mph
(120 km/h)
R
drive for approximately three minutes at a
speed over 50 mph (80 km/h)
202
Driving systems
Driving and parking
The "Raised level" remains active when you
are not driving within these speed ranges.
Setting the normal level
X
Start the engine.
If indicator lamp : is lit:
X
Press button ;.
Indicator lamp : goes out. The vehicle is
adjusted to normal level.
Suspension tuning
General notes
The electronically controlled damping system
works continuously. This improves driving
safety and ride comfort.
The damping is tuned individually to each
wheel and depends on:
R
your driving style, e.g. sporty
R
the road surface condition, e.g. bumps
R
your individual selection, i.e. sports or com-
fort
Your selection remains stored even if you
remove the SmartKey from the ignition lock.
Sports tuning
The firmer suspension tuning in Sport mode
ensures even better contact with the road.
Select this mode when employing a sporty
driving style, e.g. on winding country roads.
X
Press button :.
Indicator lamp ; lights up. Sports suspen-
sion tuning is selected.
The AIRMATIC SPORTAIRMATIC SPORT message appears in
the multifunction display.
Comfort tuning
In comfort mode, the driving characteristics
of your vehicle are more comfortable. There-
fore, select this mode if you favor a more
comfortable driving style. Select comfort
mode also when driving fast on straight roads,
e.g. on straight stretches of highway.
X
Press button :.
Indicator lamp = lights up. Comfort tuning
is selected.
The AIRMATIC COMFORTAIRMATIC COMFORT message appears
in the multifunction display.
AMG adaptive sport suspension sys-
tem
Important safety notes
G
WARNING
When the vehicle is being lowered, people
could become trapped if their limbs are
between the vehicle body and the wheels or
underneath the vehicle. There is a risk of
injury.
Make sure no one is underneath the vehicle or
in the immediate vicinity of the wheel arches
when the vehicle is being lowered.
G
WARNING
Vehicles with level control:
The vehicle is slightly lowered if:
R
you have selected comfort suspension tun-
ing and
R
you lock the vehicle within approximately
60 seconds of switching off the engine
You and people in the vicinity of the wheel
arch or the underbody may thus become trap-
ped. There is a risk of injury.
Make sure that nobody is in the vicinity of the
wheel arch or the underbody when you lock
the vehicle.
Driving systems
203
Driving and parking
Z
!
The vehicle is lowered by about 0.8 in
(20 mm) if:
R
you have selected "Comfortable tuning"
R
you switch off the engine and then
R
you lock the vehicle within approximately
60 seconds
When parking, position your vehicle so that
it does not make contact with the curb as
the vehicle is lowered. Your vehicle could
otherwise be damaged.
Suspension tuning
General notes
The electronically controlled damping system
works continuously. This improves driving
safety and ride comfort.
The damping is tuned individually to each
wheel and depends on:
R
your driving style, e.g. sporty
R
the road surface condition, e.g. bumps
R
your individual selection of Sport, Sport +
or Comfort
Sport mode
:
Mode selection button
;
Button to store, recall and display the
selected mode
=
Sport + mode indicator lamp
?
Sport mode indicator lamp
The firmer suspension tuning in Sport mode
ensures better contact with the road. Select
this mode when employing a sporty driving
style, e.g. on winding country roads.
X
Press button : once.
Indicator lamp ? lights up. You have selec-
ted Sport mode.
The AMGAMG SuspensionSuspension SystemSystem SPORTSPORT mes-
sage appears in the multifunction display.
Sport + mode
The very firm setting of the suspension tuning
in Sport + mode ensures the best possible
contact with the road. Select this mode pref-
erably when driving on race circuits.
If indicator lamps = and ? are off:
X
Press button : twice.
Indicator lamps = and ? light up. You
have selected Sport + mode.
The AMG Suspension System SPORT +AMG Suspension System SPORT +
message appears in the multifunction dis-
play.
If indicator lamp ? lights up:
X
Press button : once.
Second indicator lamp = lights up. You
have selected Sport + mode.
The AMG Suspension System SPORT +AMG Suspension System SPORT +
message appears in the multifunction dis-
play.
Comfort mode
When comfort mode is selected, the driving
characteristics of your vehicle are more com-
fortable. Select this mode if you favor a com-
fort-oriented driving style. Select comfort
mode also when driving fast on straight roads,
e.g. on straight stretches of highway.
X
Press button : repeatedly until indicator
lamps = and ? go out.
You have selected Comfort mode.
The AMG Suspension System COMFORTAMG Suspension System COMFORT
message appears in the multifunction dis-
play.
Storing and calling up settings
Once the suspension tuning and drive pro-
gram have been selected, you can store and
call up your settings using AMG button ;.
204
Driving systems
Driving and parking
X
To store: press AMG button ; until you
hear a tone.
X
To call up: press AMG button ;.
The stored suspension tuning and drive
program are selected.
X
To display: briefly press AMG button ;.
Your selection appears in the multifunction
display.
Vehicle level
Important safety notes
G
WARNING
When the vehicle is being lowered, people
could become trapped if their limbs are
between the vehicle body and the wheels or
underneath the vehicle. There is a risk of
injury.
Make sure no one is underneath the vehicle or
in the immediate vicinity of the wheel arches
when the vehicle is being lowered.
The vehicle lowers when you press the button
for selecting the suspension tuning or the
AMG button. The vehicle also lowers if it is
stationary.
!
If Sport or Sport + suspension tuning has
been selected, the vehicle's ground clear-
ance decreases. Make sure that no objects
become trapped or that the vehicle does
not become damaged, for example, on the
curb.
i
The vehicle level may change visibly at the
rear axle if you park the vehicle and the
outside temperature changes. If the tem-
perature drops, the vehicle level lowers;
with an increase in temperature, the vehi-
cle level rises.
Changing the rear axle ride height
This function is only available for the E 63
AMG 4MATIC.
The vehicle level at the rear axle depends on
the selected suspension tuning and the vehi-
cle speed.
The vehicle level at the rear axle changes dur-
ing the journey depending on the selected
suspension tuning:
R
Comfort: +0.4 in (+10 mm)
R
Sport + and Sport: -0.6 in (-15 mm)
When changing from Comfort to Sport or
Sport +, the axle is lowered approximately
1.0 in (25 mm). When changing from Sport or
Sport + to Comfort, the axle is raised approx-
imately 1.0 in (25 mm). This level change also
takes place when the vehicle is stationary.
If you drive faster than 105 mph (170 km/h),
the rear axle level is set to a middle level. This
increases driving safety and reduces air
resistance. If you then drive slower than
93 mph (150 km/h), the level of the rear axle
is again adjusted to correspond to the selec-
ted suspension mode.
Load compensation
The vehicle can compensate differences in
the vehicle level by raising or lowering the
rear axle. This is the case, for example, if peo-
ple get out or if luggage is being loaded.
Load compensation takes place if:
R
a door or the trunk lid/tailgate is opened
R
the parked vehicle is unlocked
For larger level changes, the engine must be
running.
4MATIC (permanent four-wheel drive)
If you fail to adapt your driving style, 4MATIC
can neither reduce the risk of accident nor
override the laws of physics. 4MATIC cannot
take account of road, weather and traffic con-
ditions. 4MATIC is only an aid. You are
responsible for the distance to the vehicle in
front, for vehicle speed, for braking in good
time and for staying in your lane.
If a drive wheel spins due to insufficient grip:
R
Only depress the accelerator pedal as far as
necessary when pulling away.
R
Accelerate less when driving.
Driving systems
205
Driving and parking
Z
!
Never tow the vehicle with one axle
raised. This may damage the transfer case.
Damage of this sort is not covered by the
Mercedes-Benz Limited Warranty. All
wheels must remain either on the ground or
be fully raised. Observe the instructions for
towing the vehicle with all wheels in full
contact with the ground.
i
In wintry driving conditions, the maximum
effect of 4MATIC can only be achieved if
you use winter tires (M+S tires), with snow
chains if necessary.
4MATIC ensures that all four wheels are per-
manently driven. Together with ESP
®
, it
improves the traction of your vehicle when-
ever a drive wheel spins due to insufficient
grip.
PARKTRONIC
Important safety notes
PARKTRONIC is an electronic parking aid with
ultrasonic sensors. It monitors the area
around your vehicle using six sensors in the
front bumper and six sensors in the rear
bumper. PARKTRONIC indicates visually and
audibly the distance between your vehicle
and an object.
PARKTRONIC is only an aid. It is not a replace-
ment for your attention to your immediate
surroundings. You are always responsible for
safe maneuvering, parking and exiting a park-
ing space. When maneuvering, parking or
pulling out of a parking space, make sure that
there are no persons, animals or objects in
the area in which you are maneuvering.
!
When parking, pay particular attention to
objects above or below the sensors, such
as flower pots or trailer drawbars.
PARKTRONIC does not detect such objects
when they are in the immediate vicinity of
the vehicle. You could damage the vehicle
or the objects.
The sensors may not detect snow and other
objects that absorb ultrasonic waves.
Ultrasonic sources such as an automatic
car wash, the compressed-air brakes on a
truck or a pneumatic drill could cause
PARKTRONIC to malfunction.
PARKTRONIC may not function correctly on
uneven terrain.
PARKTRONIC is activated automatically when
you:
R
switch on the ignition
R
shift the transmission to position D, R or N
R
release the parking brake
PARKTRONIC is deactivated at speeds above
11 mph (18 km/h). It is reactivated at lower
speeds.
Range of the sensors
General notes
PARKTRONIC does not take objects into con-
sideration that are:
R
below the detection range, e.g. people, ani-
mals or objects.
R
above the detection range, e.g. overhang-
ing loads, truck overhangs or loading
ramps.
:
Sensors in the front bumper, left-hand
side (example)
The sensors must be free from dirt, ice or
slush. They can otherwise not function cor-
rectly. Clean the sensors regularly, taking
care not to scratch or damage them
(Y page 340).
206
Driving systems
Driving and parking
Example: side view
Example: top view
Front sensors
Center Approx. 40 in (approx.
100 cm)
Corners Approx. 24 in (approx.
60 cm)
Rear sensors
Center Approx. 48 in (approx.
120 cm)
Corners Approx. 32 in (approx.
80 cm)
Minimum distance
Center Approx. 8 in (approx.
20 cm)
Corners Approx. 6 in (approx.
15 cm)
If there is an obstacle within this range, the
relevant warning displays light up and a warn-
ing tone sounds. If the distance falls below
the minimum, the distance may no longer be
shown.
Warning displays
Warning display for the front area
:
Segments on the left-hand side of the
vehicle
;
Segments on the right-hand side of the
vehicle
=
Segments showing operational readiness
The warning displays show the distance
between the sensors and the obstacle. The
warning display for the front area is located
on the dashboard above the center air vents.
The warning display for the rear area is loca-
ted on the headliner in the rear compartment.
The warning display for each side of the vehi-
cle is divided into five yellow and two red seg-
ments. PARKTRONIC is operational if yellow
segments showing operational readiness =
light up.
The selected transmission position and the
direction in which the vehicle is rolling deter-
mine which warning display is active when the
engine is running.
Transmission
position
Warning display
D
Front area activated
R or N Rear and front areas
activated
P
No areas activated
Driving systems
207
Driving and parking
Z
One or more segments light up as the vehicle
approaches an obstacle, depending on the
vehicle's distance from the obstacle.
From the:
R
sixth segment onwards, you will hear an
intermittent warning tone for approx-
imately two seconds.
R
seventh segment onwards, you will hear a
warning tone for approximately two sec-
onds. This indicates that you have now
reached the minimum distance.
Deactivating/activating PARKTRONIC
:
To deactivate/activate PARKTRONIC
;
Indicator lamp
If indicator lamp ; lights up, PARKTRONIC is
deactivated. Active Parking Assist is then also
deactivated.
i
PARKTRONIC is automatically activated
when you turn the SmartKey to position 2 in
the ignition lock.
208
Driving systems
Driving and parking
Problems with PARKTRONIC
Problem
Possible causes/consequences and MM Solutions
Only the red segments
in the PARKTRONIC
warning displays are lit.
You also hear a warning
tone for approximately
two seconds.
PARKTRONIC is then
deactivated and the
indicator lamp on the
PARKTRONIC button
lights up.
PARKTRONIC has malfunctioned and has switched off.
X
If problems persist, have PARKTRONIC checked at a qualified
specialist workshop.
Only the red segments
in the PARKTRONIC
warning displays are lit.
PARKTRONIC is then
deactivated.
The PARKTRONIC sensors are dirty or there is interference.
X
Clean the PARKTRONIC sensors (Y page 340).
X
Switch the ignition back on.
The problem may be caused by an external source of radio or
ultrasound waves.
X
See if PARKTRONIC functions in a different location.
Active Parking Assist
General notes
Active Parking Assist is an electronic parking
aid with ultrasound. It measures the road on
both sides of the vehicle. A parking symbol
indicates a suitable parking space. Active
steering intervention and brake application
can assist you during parking. You may also
use PARKTRONIC (Y page 206).
i
The active braking application is only
available on vehicles with automatic trans-
mission.
Important safety notes
Active Parking Assist is merely an aid. It is not
a replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering, parking
and exiting a parking space. Make sure that
no persons, animals or objects are in the
maneuvering range.
When PARKTRONIC is switched off, Active
Parking Assist is also unavailable.
G
WARNING
While parking or pulling out of a parking
space, the vehicle swings out and can drive
onto areas of the oncoming lane. This could
result in a collision with another road user.
There is a risk of an accident.
Pay attention to other road users. Stop the
vehicle if necessary or cancel the Active Park-
ing Assist parking procedure.
!
If unavoidable, you should drive over
obstacles such as curbs slowly and not at a
sharp angle. Otherwise, you may damage
the wheels or tires.
Driving systems
209
Driving and parking
Z
Active Parking Assist may possibly indicate
parking spaces which are not suitable for
parking, for example:
R
where parking or stopping is prohibited
R
in front of driveways or entrances and exits
R
on unsuitable surfaces
Parking tips:
R
On narrow roads, drive as close to the park-
ing space as possible.
R
Parking spaces that are littered or over-
grown might be identified or measured
incorrectly.
R
Parking spaces that are partially occupied
by trailer drawbars might not be identified
as such or be measured incorrectly.
R
Snowfall or heavy rain may lead to a parking
space being measured inaccurately.
R
Pay attention to the PARKTRONIC
(Y page 207)warning messages during the
parking procedure.
R
You can intervene in the steering procedure
to correct it at any time. Active Parking
Assist will then be canceled.
R
When transporting a load which protrudes
from your vehicle, you should not use
Active Parking Assist.
R
Never use Active Parking Assist when snow
chains are installed.
R
Make sure that the tire pressures are
always correct. This has a direct influence
on the parking characteristics of the vehi-
cle.
Use Active Parking Assist for parking spaces:
R
parallel or at right angles to the direction of
travel
R
that are on straight roads, not bends
R
that are on the same level as the road, e.g.
not on the pavement
Detecting parking spaces
Objects located above the height range of
Active Parking Assist will not be detected
when the parking space is measured. These
are not taken into account when the parking
procedure is calculated, e.g. overhanging
loads, tail sections or loading ramps of goods
vehicles.
G
WARNING
If there are objects above the detection range:
R
Active Park Assist may steer too early
R
the vehicle may not stop in front of these
objects.
You may cause a collision as a result. There is
a risk of an accident.
If there are objects above the detection range,
stop and deactivate Active Parking Assist.
For further information on the detection
range (Y page 206).
Active Parking Assist does not assist you
parking in spaces at right angles to the direc-
tion of travel if:
R
two parking spaces are located directly
next to one another
R
the parking space is directly next to a low
obstacle such as a low curb
R
you park forwards
Active Parking Assist does not assist you
parking in spaces that are parallel or at right
angles to the direction of travel if:
R
the parking space is on a curb
R
the system reads the parking space as
being blocked, for example by foliage or
grass paving blocks
R
the area is too small for the vehicle to
maneuver into
R
the parking space is bordered by an obsta-
cle, e.g. a tree, a post or a trailer
210
Driving systems
Driving and parking
Example: detected parking space
:
Detected parking space on the left
;
Parking symbol
=
Detected parking space on the right
Active Parking Assist is switched on automat-
ically when driving forwards. The system is
operational at speeds of up to approximately
22 mph (35 km/h). While in operation, the
system independently locates and measures
parking spaces on both sides of the vehicle.
Active Parking Assist will only detect parking
spaces:
R
parallel or at right angles to the direction of
travel
R
that are parallel to the direction of travel
and at least 59 in (1.5 m) wide
R
that are parallel to the direction of travel
and at least 39.5 in (1.0 m) longer than your
vehicle
R
that are at right angles to the direction of
travel and at least 39.5 in (1.0 m) wider
than your vehicle
i
Note that Active Parking Assist cannot
measure the length of a parking space if it
is at right angles to the direction of travel.
You will need to judge whether your vehicle
will fit into the parking space.
When driving at speeds below 19 mph
(30 km/h), you will see the parking symbol as
a status indicator in the instrument cluster.
When a parking space has been detected, an
arrow towards the right or the left also
appears. By default, Active Parking Assist
only displays parking spaces on the front-
passenger side. Parking spaces on the driv-
er's side are displayed as soon as the turn
signal on the driver's side is activated. When
parking on the driver's side, this must remain
switched on until you acknowledge the use of
Active Parking Assist by pressing the a
button on the multifunction steering wheel.
The system automatically determines
whether the parking space is parallel or at
right angles to the direction of travel.
A parking space is displayed while you are
driving past it, and until you are approx-
imately 50 ft (15 m) away from it.
Parking
G
WARNING
If you leave the vehicle when it is only being
braked by Active Parking Assist it could roll
away if:
R
there is a malfunction in the system or in
the voltage supply.
R
the electrical system in the engine com-
partment, the battery or the fuses have
been tampered with.
R
the battery is disconnected.
R
the accelerator pedal has been depressed,
e.g. by a vehicle occupant.
There is a risk of an accident.
Before leaving the vehicle, always secure it
against rolling away.
i
Vehicles with automatic transmission:
When PARKTRONIC detects obstacles,
Active Parking Assist brakes automatically
during the parking process. You are respon-
sible for braking in good time.
X
Stop the vehicle when the parking space
symbol shows the desired parking space in
the instrument cluster.
X
Shift the transmission to position R.
The StartStart ParkPark Assist?Assist? Yes:Yes: OKOK No:No:
% message appears in the multifunction
display.
Driving systems
211
Driving and parking
Z
X
To cancel the procedure: press the %
button on the multifunction steering wheel
or pull away.
or
X
To park using Active Parking Assist:
press the a button on the multifunction
steering wheel.
The Park Assist Active AcceleratePark Assist Active Accelerate
andand BrakeBrake ObserveObserve SurroundingsSurroundings mes-
sage appears in the multifunction display.
X
Let go of the multifunction steering wheel.
X
Back up the vehicle, being ready to brake at
all times. When backing up, drive at a speed
below approximately 6 mph (10 km/h).
Otherwise Active Parking Assist will be can-
celed.
Active Parking Assist brakes the vehicle to
a standstill when the vehicle approaches
the rear border of the parking space.
Maneuvering may be required in tight park-
ing spaces.
The Park Assist Active Select DPark Assist Active Select D
ObserveObserve SurroundingsSurroundings message appears in
the multifunction display.
X
Shift the transmission to position D while
the vehicle is stationary.
Active Parking Assist immediately steers in
the other direction.
The Park Assist Active AcceleratePark Assist Active Accelerate
andand BrakeBrake ObserveObserve SurroundingsSurroundings mes-
sage appears in the multifunction display.
i
You will achieve the best results by wait-
ing for the steering procedure to complete
before pulling away.
X
Drive forwards and be ready to brake at all
times.
Active Parking Assist brakes the vehicle to
a standstill.
The Park Assist Active Select RPark Assist Active Select R
ObserveObserve SurroundingsSurroundings message appears in
the multifunction display.
Further transmission shifts may be neces-
sary.
As soon as the parking procedure is com-
plete, the Park Assist DisabledPark Assist Disabled message
appears in the multifunction display and you
will hear a tone. The vehicle is now parked.
The vehicle is kept stationary without the
driver having to depress the brake pedal. The
braking effect is canceled when you depress
the accelerator pedal.
Active Parking Assist no longer supports you
with steering interventions and brake appli-
cations. When Active Parking Assist is fin-
ished, you must steer and brake again your-
self. PARKTRONIC is still available.
X
Maneuver if necessary.
X
Always observe the warning messages dis-
played by PARKTRONIC (Y page 207).
Parking tips:
R
The way your vehicle is positioned in the
parking space after parking is dependent
on various factors. These include the posi-
tion and shape of the vehicles parked in
front and behind it and the conditions of the
location. It may be the case that Active
Parking Assist guides you too far into a
parking space, or not far enough into it. In
some cases, it may also lead you across or
onto the curb. If necessary, you should can-
cel the parking procedure with Active Park-
ing Assist.
R
You can also select preselect transmission
position D. The vehicle redirects and does
not drive as far into the parking space.
Should a gear be changed too early, the
parking procedure will be canceled. A sen-
sible parking position can no longer be ach-
ieved from this position.
Exiting a parking space
In order that Active Parking Assist can sup-
port you when you exit the parking space:
R
the border of the parking space must be
high enough at the front and the rear. A
curb is too small, for example.
R
the border of the parking space must not be
too wide, as the position of the vehicle must
212
Driving systems
Driving and parking
not exceed an angle of 45° to the starting
position as it is maneuvering into the park-
ing space.
R
a maneuvering distance of at least 3.3 ft
(1.0 m) must be available.
i
Vehicles with automatic transmission:
If PARKTRONIC detects obstacles, Active
Parking Assist brakes automatically whilst
the vehicle exits the parking space. You are
responsible for braking in good time.
Active Parking Assist can only assist you with
exiting a parking space if you have parked the
vehicle parallel to the direction of travel using
Active Parking Assist.
X
Start the engine.
X
Release the parking brake.
X
Switch on the turn signal in the direction
you are pulling away.
X
Shift the transmission to position D or R.
The Start Park Assist? Yes: OK No:Start Park Assist? Yes: OK No:
% message appears in the multifunction
display.
X
To cancel the procedure: press the %
button on the multifunction steering wheel
or pull away.
or
X
To exit a parking space using Active
Parking Assist: press the a button on
the multifunction steering wheel.
The Park Assist Active AcceleratePark Assist Active Accelerate
andand BrakeBrake ObserveObserve SurroundingsSurroundings mes-
sage appears in the multifunction display.
X
Let go of the multifunction steering wheel.
X
Pull away, being ready to brake at all times.
Do not exceed a maximum speed of
approximately 6 mph (10 km/h) when exit-
ing a parking space. Otherwise Active Park-
ing Assist will be canceled.
X
Shift the transmission to position D or R as
required or according to the message while
the vehicle is stationary.
Active Parking Assist immediately steers in
the other direction. The Park AssistPark Assist
Active Accelerate and BrakeActive Accelerate and Brake
ObserveObserve SurroundingsSurroundings message appears
in the multifunction display.
i
You will achieve the best results by wait-
ing for the steering procedure to complete
before pulling away.
If you back up after activation, the steering
wheel is moved to the straight-ahead posi-
tion.
X
Drive forwards and back up as instructed
by the PARKTRONIC warning displays.
Once you have exited the parking space com-
pletely, the steering wheel is moved to the
straight-ahead position. You hear a tone and
the Park Assist FinishedPark Assist Finished message
appears in the multifunction display. You will
then have to steer and merge into traffic on
your own. PARKTRONIC is still available. You
can take over the steering, before the vehicle
has exited the parking space completely. This
is useful, for example when you recognize
that it is already possible to pull out of the
parking space.
Canceling Active Parking Assist
You can cancel Active Parking Assist at any
time.
X
Stop the movement of the multifunction
steering wheel or steer yourself.
Active Parking Assist will be canceled at
once. The Park Assist CanceledPark Assist Canceled mes-
sage appears in the multifunction display
and you hear a tone.
or
X
Press the PARKTRONIC button on the cen-
ter console (Y page 208).
PARKTRONIC is switched off and Active
Parking Assist is immediately canceled.
The Park Assist CanceledPark Assist Canceled message
appears in the multifunction display and
you hear a tone.
Active Parking Assist is canceled automati-
cally if:
R
the transmission is shifted too early
R
transmission position P is selected
Driving systems
213
Driving and parking
Z
R
parking using Active Parking Assist is no
longer possible
R
you are driving faster than 6 mph (10 km/h)
R
a wheel spins, ESP
®
intervenes or fails. In
such cases the ÷ warning lamp lights up
in the instrument cluster.
A warning tone sounds. The parking symbol
disappears and the multifunction display
shows the Park Assist CanceledPark Assist Canceled mes-
sage.
When Active Parking Assist is canceled, you
must steer and brake again yourself.
If a system malfunction occurs, the vehicle is
braked to a standstill. To drive on, depress the
accelerator again.
Rear view camera
General notes
Example: Sedan
Rear view camera : is located in the handle
strip of the trunk lid/tailgate.
Rear view camera : is an optical parking and
maneuvering aid. It shows the area behind
your vehicle with guide lines in the COMAND
display.
The area behind the vehicle is displayed as a
mirror image, as in the rear view mirror.
i
The text of messages shown in the
COMAND display depends on the language
setting. The following are examples of rear
view camera messages in the COMAND
display.
Important safety notes
The rear view camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-
ble for safe maneuvering and parking. When
maneuvering or parking, make sure that there
are no persons, animals or objects in the area
in which you are maneuvering.
Under the following circumstances, the rear
view camera will not function, or will function
in a limited manner:
R
if the trunk lid/tailgate is open
R
in heavy rain, snow or fog
R
at night or in very dark places
R
if the camera is exposed to very bright light
R
if the area is lit by fluorescent light or LED
lighting (the display may flicker)
R
if there is a sudden change in temperature,
e.g. when driving into a heated garage in
winter
R
if the camera lens is dirty or obstructed
R
if the rear of your vehicle is damaged. In this
event, have the camera position and setting
checked at a qualified specialist workshop
The field of vision and other functions of the
rear view camera may be restricted due to
additional accessories on the rear of the vehi-
cle (e.g. license plate holder, bicycle rack).
Activating/deactivating the rear view
camera
X
To activate: make sure that the SmartKey
is in position 2 in the ignition lock.
X
Make sure that the "Activation by R gear"
setting is active in COMAND, see the sep-
arate COMAND operating instructions.
X
Engage reverse gear.
The area behind the vehicle is shown in the
COMAND display with guide lines.
To deactivate: the rear view camera deacti-
vates if you shift the transmission to P or after
driving forwards a short distance.
214
Driving systems
Driving and parking
360° camera
General notes
The 360° camera is a system consisting of
four cameras.
The system analyzes images from the follow-
ing cameras:
R
Rear view camera
R
Front camera
R
Two cameras in the exterior rear view mir-
rors
The cameras capture the immediate sur-
roundings of the vehicle. The system sup-
ports you, e.g. when parking or if vision is
restricted at an exit.
The 360° camera images can be shown in full
screen mode or in six different split-screen
views on the COMAND display. A split-screen
view also includes a top view of the vehicle.
This view is calculated from the data supplied
by the installed cameras (virtual camera).
The six split-screen views are:
R
top view and picture from the rear view
camera (130° viewing angle)
R
top view and image from the front camera
(130° viewing angle without displaying the
maximum steering wheel angle)
R
top view and enlarged rear view
R
top view and enlarged front view
R
top view and pictures from the rearward
facing mirror cameras (rear wheel view)
R
top view and pictures from the forward
facing mirror cameras (front wheel view)
When the function is active and you shift the
transmission from D or R to N, the dynamic
guidelines are hidden.
When you change between transmission
positions D and R, you see the previously
selected front or rear view.
Important safety notes
The 360°camera is only an aid and may show
a distorted view of obstacles, show them
incorrectly or not at all. The 360°camera is
not a substitute for attentive driving.
You are always responsible for safe maneu-
vering and parking. When maneuvering or
parking, make sure that there are no persons,
animals or objects in the area in which you are
maneuvering.
You are always responsible for safety, and
must always pay attention to your surround-
ings when parking and maneuvering. This
applies to the areas behind, in front of and
beside the vehicle. You could otherwise
endanger yourself and others.
The 360° camera will not function or will
function in a limited manner:
R
if the doors are open
R
if the exterior mirrors are folded in
R
if the trunk lid/tailgate is open
R
in heavy rain, snow or fog
R
at night or in very dark places
R
if the cameras are exposed to very bright
light
R
if the area is lit by fluorescent bulbs or LED
lighting (the display may flicker)
R
if there is a sudden change in temperature,
e.g. when driving into a heated garage in
winter
R
if the camera lenses are dirty or covered
R
if the vehicle components in which the
cameras are installed are damaged. In this
event, have the camera position and setting
checked at a qualified specialist workshop.
Do not use the 360° camera in this case. You
can otherwise injure others or cause damage
to objects or the vehicle.
Guide lines are always shown at road level.
Activation conditions
The 360° camera image can be displayed if:
R
your vehicle is equipped with a 360° cam-
era
R
the SmartKey is in position 2 in the ignition
lock
Driving systems
215
Driving and parking
Z
R
COMAND/Audio 20 is switched on
R
the 360° Camera360° Camera function is switched on
Activating the 360° camera using the
SYS button
X
Press the W button in the center con-
sole for longer than 2 seconds.
Depending on whether position D or R is
engaged, the following is shown:
R
full screen display with the image from
the front camera
R
full screen display with the image from
the rear view camera
Activating the 360° camera with
COMAND
X
Press the W button in the center con-
sole.
or
X
Select SystemSystem by turning cVd the
COMAND controller and press W to con-
firm.
X
Select 360° Camera360° Camera and press W to con-
firm.
Depending on whether position D or R is
engaged, the following is shown:
R
a split screen with top view and the
image from the front camera or
R
a split screen with top view and the
image from the rear view camera
Activating the 360° camera using
reverse gear
The 360° camera images can be automati-
cally displayed by engaging reverse gear.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
Make sure that the Activation by RActivation by R
geargear function is selected in COMAND/
Audio 20, see the separate COMAND/
Audio 20 operating instructions.
X
To show the 360° camera image: engage
reverse gear.
The area behind the vehicle is shown in the
COMAND/Audio 20 display in split-screen
mode. You see the top view of the vehicle
and the image from the rear view camera.
Selecting the split-screen and full
screen displays
X
To switch between split screen views:
switch to the line with the vehicle icons by
sliding ZVthe controller.
X
Turn cVd the controller and select one of
the vehicle icons.
X
To switch to full screen mode: select
Full ScreenFull Screen by turning cVd the control-
ler and press W to confirm.
i
The Full ScreenFull Screen option is only available
in the following views:
R
Top view with picture from the rear view
camera
R
Top view with picture from the front cam-
era
Displays in the COMAND/Audio 20 dis-
play
Important safety notes
The camera system may show a distorted
view of obstacles, show them incorrectly or
not at all. Obstacles are not shown by the
system in the following locations:
R
under the front and rear bumpers
R
very close to the front and rear bumpers
R
in the area immediately above the tailgate
handle/trunk lid handle
R
very close to the exterior mirrors
R
in the transitional areas between the vari-
ous cameras in the virtual top view
216
Driving systems
Driving and parking
!
Objects not at ground level may appear to
be further away than they actually are, e.g.:
R
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
Use the guidelines only for orientation.
Approach objects no further than the bot-
tom-most guideline.
Top view with picture from the rear view
camera
:
Symbol for the split screen setting with
top view and rear view camera image
;
Yellow guide line at a distance of approx-
imately 13 ft (4.0 m) from the rear of the
vehicle
=
Yellow guide line for the vehicle width
including the exterior mirrors, for current
steering wheel angle (dynamic)
?
Yellow lane marking tires at current steer-
ing wheel angle (dynamic)
A
Yellow guide line for the maximum steer-
ing angle
B
Yellow guide line at a distance of approx-
imately 3 ft (1.0 m) from the rear of the
vehicle
C
Vehicle center axle (marker assistance)
D
Red guide line at a distance of approx-
imately 12 in (0.30 m) from the rear of the
vehicle
E
Bumper
The guide lines are shown when the trans-
mission is in position R.
The distance specifications only apply to
objects that are at ground level.
Top view with picture from the front cam-
era
:
Symbol for the split screen setting with
top view and front camera image
;
Yellow guide line at a distance of approx-
imately 13 ft (4.0 m) from the front of the
vehicle
=
Yellow guide line for the vehicle width
including the exterior mirrors, for current
steering wheel angle (dynamic)
?
Yellow lane marking tires at current steer-
ing wheel angle (dynamic)
Driving systems
217
Driving and parking
Z
A
Yellow guide line at a distance of approx-
imately 3 ft (1.0 m) from the front of the
vehicle
B
Red guide line at a distance of approx-
imately 12 in (0.30 m) from the front of the
vehicle
Top view and enlarged rear view
:
Symbol for the split screen setting with
top view and rear view camera image
enlarged
;
Red guide line at a distance of approx-
imately 12 in (0.30 m) from the rear of the
vehicle
This view assists you in estimating the dis-
tance to the vehicle behind you.
i
This setting can also be selected as an
enlarged front view.
Top view with picture from the mirror
camera
:
Symbol for the top view and forward-
facing mirror camera setting
;
Yellow guide line for the vehicle width
including the exterior mirrors (right side of
vehicle)
=
Yellow guide line for the vehicle width
including the exterior mirrors (left side of
vehicle)
i
You can also select the mirror camera
setting for the rear-facing view.
Wide-angle function
Example: full screen mode with PARKTRONIC dis-
play
:
Symbol for the full screen setting with rear
view camera image
;
PARKTRONIC warning display
If the vehicle is equipped with PARKTRONIC
and the function is active (Y page 208), warn-
ing displays ; in the COMAND display are
also active or light up accordingly.
218
Driving systems
Driving and parking
PARKTRONIC appears:
R
in split screen view as red or yellow brack-
ets around the vehicle icon in the top view,
or
R
in the full screen view, on the right-hand
side at the bottom as red or yellow brackets
around the vehicle icon
i
The full screen display can also be selec-
ted as front view.
Select this view when you are driving out of an
exit and the view of crossing traffic is restric-
ted, for example.
Exiting 360° camera display mode
As soon as your vehicle exceeds a speed of
19 mph (30 km/h) with the function activa-
ted, the function switches off. The COMAND
display switches back to the previously selec-
ted view. You can also switch the display by
selecting the & symbol in the display and
pressing W the controller to confirm.
The 360° camera display is also ended if you
select transmission position P.
ATTENTION ASSIST
General notes
ATTENTION ASSIST helps you during long,
monotonous journeys, such as on highways.
It is active in the 37 mph (60 km/h) to
125 mph (200 km/h) range. If ATTEN-
TION ASSIST detects typical indicators of fati-
gue or increasing lapses in concentration on
the part of the driver, it suggests taking a
break.
Important safety notes
ATTENTION ASSIST is only an aid to the
driver. It might not always recognize fatigue
or increasing inattentiveness in time or fail to
recognize them at all. The system is not a
substitute for a well-rested and attentive
driver.
The functionality of ATTENTION ASSIST is
restricted and warnings may be delayed or
not occur at all:
R
if the length of the journey is less than
approximately 30 minutes
R
if the road condition is poor, e.g. if the sur-
face is uneven or if there are potholes
R
if there is a strong side wind
R
if you have adopted a sporty driving style
with high cornering speeds or high rates of
acceleration
R
if you are predominantly driving at a speed
below 37 mph (60 km/h) or above 124 mph
(200 km/h)
R
if you are driving with the DISTRONIC PLUS
Steering Assist activated
R
if the time has been set incorrectly
R
in active driving situations, such as when
you change lanes or change your speed
ATTENTION ASSIST is reset when you con-
tinue your journey and starts assessing your
tiredness again if:
R
you switch off the engine
R
you take off your seat belt and open the
driver's door, e.g. for a change of drivers or
to take a break
Displaying the attention level
You can have current status information dis-
played in the assistance menu (Y page 240)
of the on-board computer.
Driving systems
219
Driving and parking
Z
X
Select the Assistance display for ATTEN-
TION ASSIST using the on-board computer
(Y page 241).
The following information is displayed:
R
length of the journey since the last break.
R
the attention level determined by ATTEN-
TION ASSIST, displayed in a bar display in
five levels from high to low.
R
if ATTENTION ASSIST is unable to calculate
the attention level and cannot output a
warning, the System SuspendedSystem Suspended message
appears. The bar display then changes the
display, e.g. if you are driving at a speed
below 37 mph (60 km/h) or above 124 mph
(200 km/h).
Activating ATTENTION ASSIST
X
Activate ATTENTION ASSIST using the on-
board computer (Y page 242).
The system determines the attention level
of the driver depending on the setting
selected:
Standard selected: the sensitivity with
which the system determines the attention
level is set to normal.
Sensitive selected: the sensitivity is set
higher. The attention level detected by Atten-
tion Assist is adapted accordingly and the
driver is warned earlier.
When ATTENTION ASSIST is deactivated, the
À symbol and OFF appear in the multi-
function display in the assistance display
when the engine is running.
When ATTENTION ASSIST has been deactiva-
ted, it is automatically reactivated after the
engine has been stopped. The sensitivity
selected corresponds to the last selection
activated (standard/sensitive).
Warning in the multifunction display
If fatigue or increasing lapses in concentra-
tion are detected, a warning appears in the
multifunction display: Attention Assist:Attention Assist:
Take a Break!Take a Break!
In addition to the message shown in the mul-
tifunction display, you will then hear a warn-
ing tone.
X
If necessary, take a break.
X
Confirm the message by pressing the a
button on the steering wheel.
On long journeys, take regular breaks in good
time to allow yourself to rest properly. If you
do not take a break, you will be warned again
after 15 minutes at the earliest. This will only
happen if ATTENTION ASSIST still detects
typical indicators of fatigue or increasing lap-
ses in concentration.
Lane Tracking package
General notes
The Lane Tracking package consists of Blind
Spot Assist (Y page 220) and Lane Keeping
Assist (Y page 222).
Blind Spot Assist
General notes
Blind Spot Assist uses a radar sensor system
to monitor the areas on both sides of your
vehicle. It supports you from a speed of
approximately 20 mph (30 km/h). A warning
display in the exterior mirrors draws your
attention to vehicles detected in the moni-
tored area. If you then switch on the corre-
sponding turn signal to change lanes, you will
also receive a visual and audible collision
warning. Blind Spot Assist uses sensors in the
rear bumper for monitoring purposes.
Important safety notes
G
WARNING
Blind Spot Assist does not react to:
R
vehicles overtaken too closely on the side,
placing them in the blind spot area
R
vehicles which approach with a large speed
differential and overtake your vehicle
220
Driving systems
Driving and parking
As a result, Blind Spot Assist may not give
warnings in such situations. There is a risk of
an accident.
Always observe the traffic conditions care-
fully, and maintain a safe lateral distance.
Blind Spot Assist is only an aid. It may fail to
detect some vehicles and is no substitute for
attentive driving. Always ensure that there is
sufficient distance to the side for other road
users and obstacles.
i
USA only:
This device has been approved by the FCC
as a "Vehicular Radar System". The radar
sensor is intended for use in an automotive
radar system only. Removing, tampering
with, or altering the device will void any
warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
Monitoring range of the sensors
In particular, the detection of obstacles can
be impaired if:
R
there is dirt on the sensors or anything else
covering the sensors
R
there is poor visibility, e.g. due to fog, heavy
rain, snow or spray
R
there are narrow vehicles, e.g. motorcycles
or bicycles
R
the road has very wide lanes
R
the road has narrow lanes
R
you are not driving in the middle of the lane
R
there are barriers or similar lane borders
Vehicles in the monitoring range are then not
indicated.
Example: Sedan
Blind Spot Assist monitors the area up to 10 ft
(3 m) behind your vehicle and directly next to
your vehicle, as shown in the diagram.
If the lanes are narrow, vehicles driving in the
lane beyond the lane next to your vehicle may
be indicated, especially if the vehicles are not
driving in the middle of their lane. This may be
the case if there are vehicles driving at the
inner edge of their lanes.
Due to the nature of the system:
R
warnings may be issued in error when driv-
ing close to crash barriers or similar solid
lane borders.
R
the warning is canceled when driving for an
extended period next to long vehicles, such
as trucks.
The two radar sensors for Blind Spot Assist
are integrated into the sides of the rear
bumper. Make sure that the bumper is free of
dirt, ice or slush in the vicinity of the sensors.
The sensors must not be covered, for exam-
ple by cycle racks or overhanging loads. Fol-
lowing a severe impact or in the event of dam-
age to the bumpers, have the function of the
sensors checked at a qualified specialist
workshop. Blind Spot Assist may otherwise
not work properly.
Driving systems
221
Driving and parking
Z
Indicator and warning display
:
Yellow indicator lamp/red warning lamp
Blind Spot Assist is not active at speeds below
approximately 20 mph (30 km/h). Vehicles in
the monitoring range are then not indicated.
When Blind Spot Assist is activated, indicator
lamp : in the exterior mirrors lights up yel-
low at speeds of up to 20 mph (30 km/h). At
speeds above 20 mph (30 km/h), the indica-
tor lamp goes out and Blind Spot Assist is
operational.
If a vehicle is detected within the blind spot
monitoring range at speeds above 20 mph
(30 km/h), warning lamp : on the corre-
sponding side lights up red. This warning is
always emitted when a vehicle enters the
blind spot monitoring range from behind or
from the side. When you overtake a vehicle,
the warning only occurs if the difference in
speed is less than 7 mph (12 km/h).
The yellow indicator lamp goes out if reverse
gear is engaged. In this event, Blind Spot
Assist is no longer active.
The brightness of the indicator/warning
lamps is adjusted automatically according to
the ambient light.
Collision warning
If a vehicle is detected in the monitoring range
of Blind Spot Assist and you switch on the
corresponding turn signal, a double warning
tone sounds. Red warning lamp : flashes. If
the turn signal remains on, vehicles detected
are indicated by the flashing of red warning
lamp :. There are no further warning tones.
Switching on Blind Spot Assist
X
Make sure that Blind Spot Assist
(Y page 242) is activated in the on-board
computer.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
Warning lamps : in the exterior mirrors
light up red for approximately 1.5 seconds
and then turn yellow.
Lane Keeping Assist
General notes
Lane Keeping Assist monitors the area in
front of your vehicle with camera :, which is
mounted at the top of the windshield. Active
Lane Keeping Assist detects lane markings on
the road and can warn you before you leave
your lane unintentionally.
This function is available in the range between
40 mph and 120 mph (60 km/h and
200 km/h).
A warning may be given if a front wheel
passes over a lane marking. It will warn you by
means of intermittent vibration in the steer-
ing wheel for up to 1.5 seconds.
Important safety notes
G
WARNING
Lane Keeping Assist may not always clearly
recognize lane markings.
In this case, Lane Keeping Assist may:
R
give an unnecessary warning
R
not give a warning
222
Driving systems
Driving and parking
There is a risk of an accident.
Always pay particular attention to the traffic
situation and stay in lane, in particular if
warned by Lane Keeping Assist.
G
WARNING
The Lane Keeping Assist warning does not
return the vehicle to the original lane. There is
a risk of an accident.
You should always steer, brake or accelerate
yourself, in particular if warned by Lane Keep-
ing Assist.
If you fail to adapt your driving style, Lane
Keeping Assist can neither reduce the risk of
an accident nor override the laws of physics.
Lane Keeping Assist cannot take into account
the road, traffic and weather conditions. Lane
Keeping Assist is merely an aid. You are
responsible for the distance to the vehicle in
front, for vehicle speed, for braking in good
time and for staying in your lane.
The Lane Keeping Assist does not keep the
vehicle in the lane.
The system may be impaired or may not func-
tion if:
R
there is poor visibility, e.g. due to insuffi-
cient illumination of the road, or due to
snow, rain, fog or spray
R
there is glare, e.g. from oncoming traffic,
the sun or reflections (e.g. when the road
surface is wet)
R
the windshield is dirty, fogged up, damaged
or covered, for instance by a sticker, in the
vicinity of the camera
R
there are no, several or unclear lane mark-
ings for a lane, e.g. in areas with road con-
struction work
R
the lane markings are worn away, dark or
covered up, e.g. by dirt or snow
R
the distance to the vehicle in front is too
small and the lane markings thus cannot be
detected
R
the lane markings change quickly, e.g.
lanes branch off, cross one another or
merge
R
the road is narrow and winding
R
there are strong shadows cast on the road
Switching on Lane Keeping Assist
X
Switch on Active Lane Keeping Assist using
the on-board computer; to do so, select
StandardStandard or AdaptiveAdaptive (Y page 242).
If you drive at speeds above 40 mph
(60 km/h) and lane markings are detected,
the lines in the assistance graphics display
(Y page 241) are shown in green. Lane
Keeping Assist is ready for use.
Standard
If StandardStandard is selected, no warning vibration
occurs if:
R
you have switched on the turn signals. In
this event, the warnings are suppressed for
a certain period of time.
R
a driving safety system intervenes, such as
ABS, BAS or ESP
®
.
Adaptive
When AdaptiveAdaptive is selected, no warning vibra-
tion occurs if:
R
you have switched on the turn signals. In
this event, the warnings are suppressed for
a certain period of time.
R
a driving safety system intervenes, e.g.
ABS, BAS or ESP
®
.
R
you accelerate hard, e.g. kickdown.
R
you brake hard.
R
you steer actively, e.g. swerve to avoid an
obstacle or change lanes quickly.
R
you cut the corner on a sharp bend.
In order that you are warned only when nec-
essary and in good time if you cross the lane
marking, the system recognizes certain con-
ditions and warns you accordingly.
Driving systems
223
Driving and parking
Z
The warning vibration occurs earlier if:
R
you approach the outer lane marking on a
bend.
R
the road has very wide lanes, e.g. a high-
way.
R
the system recognizes solid lane markings.
The warning vibration occurs later if:
R
the road has narrow lanes.
R
you cut the corner on a bend.
Active Driving Assistance package
General notes
The Active Driving Assistance package con-
sists of DISTRONIC PLUS (Y page 189), Active
Blind Spot Assist (Y page 224) and Active
Lane Keeping Assist (Y page 227).
Active Blind Spot Assist
General notes
Active Blind Spot Assist uses a radar sensor
system, pointed toward the rear of the vehi-
cle, to monitor the area to the sides of the
vehicle which the driver is unable to see. A
warning display in the exterior mirrors draws
your attention to vehicles detected in the
monitored area. If you then switch on the cor-
responding turn signal to change lanes, you
will also receive a visual and audible collision
warning. If a risk of lateral collision is detec-
ted, corrective braking may help you avoid a
collision. Before a course-correcting brake
application, Active Blind Spot Assist evalu-
ates the space in the direction of travel and at
the sides of the vehicle. For this, Active Blind
Spot Assist uses radar sensors which are
pointed in the direction of travel.
Active Blind Spot Assist supports you from a
speed of approximately 20 mph (30 km/h).
Important safety notes
Active Blind Spot Assist is only an aid and is
not a substitute for attentive driving.
G
WARNING
Active Blind Spot Assist does not react to:
R
vehicles overtaken too closely on the side,
placing them in the blind spot area
R
vehicles which approach with a large speed
differential and overtake your vehicle
As a result, Active Blind Spot Assist may nei-
ther give warnings nor intervene in such sit-
uations. There is a risk of an accident.
Always observe the traffic conditions care-
fully, and maintain a safe lateral distance.
i
USA only:
This device has been approved by the FCC
as a "Vehicular Radar System". The radar
sensor is intended for use in an automotive
radar system only. Removing, tampering
with, or altering the device will void any
warranties, and is not permitted by the
FCC. Do not tamper with, alter, or use in
any non-approved way.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.
i
Canada only: This device complies with
RSS-210 of Industry Canada. Operation is
subject to the following two conditions:
1. This device may not cause harmful inter-
ference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation of the device.
Removal, tampering, or altering of the
device will void any warranties, and is not
permitted. Do not tamper with, alter, or use
in any non-approved way.
Any unauthorized modification to this
device could void the user's authority to
operate the equipment.
Radar sensors
The Active Blind Spot Assist radar sensors are
integrated into the front and rear bumpers
and behind a cover in the radiator trim. Make
sure that the bumpers and the cover in the
224
Driving systems
Driving and parking
radiator grill are free of dirt, ice or slush. The
rear sensors must not be covered, for exam-
ple by cycle racks or overhanging cargo. Fol-
lowing a severe impact or in the event of dam-
age to the bumpers, have the function of the
radar sensors checked at a qualified special-
ist workshop. Active Blind Spot Assist may
otherwise no longer work properly.
Monitoring area
G
WARNING
Active Blind Spot Assist does not detect all
traffic situations and road users. There is a
risk of an accident.
Always make sure that there is sufficient dis-
tance on the side for other traffic or obstacles.
Example: Sedan
Active Blind Spot Assist monitors the area up
to 10 ft (3.0 m) behind your vehicle and
directly next to your vehicle, as shown in the
diagram.
The detection of obstacles can be impaired in
the case of:
R
there is dirt on the sensors or anything else
covering the sensors
R
poor visibility, e.g. due to rain, snow or
spray
Vehicles in the monitoring range are then not
indicated or indicated with a delay.
Active Blind Spot Assist may not detect nar-
row vehicles, such as motorcycles or bicy-
cles, or may only detect them too late.
If the lanes are narrow, vehicles driving in the
lane beyond the lane next to your vehicle may
be indicated, especially if the vehicles are not
driving in the middle of their lane. This may be
the case if there are vehicles at the edge of
their lane.
Due to the nature of the system:
R
warnings may be issued in error when driv-
ing close to crash barriers or similar solid
lane borders.
R
the warning is canceled when driving for an
extended period next to long vehicles, such
as trucks.
Warning display
:
Warning display
Active Blind Spot Assist is not active at
speeds below approximately 20 mph
(30 km/h). Vehicles in the monitoring range
are then not indicated.
When Active Blind Spot Assist is activated,
indicator lamp : in the exterior mirrors lights
up yellow at speeds of up to 20 mph
(30 km/h). At speeds above 20 mph
(30 km/h), the indicator lamp goes out and
Active Blind Spot Assist is operational.
If a vehicle is detected within the blind spot
monitoring range at speeds above 20 mph
(30 km/h), warning lamp : on the corre-
sponding side lights up red. This warning is
always given when a vehicle enters the blind
spot monitoring range from behind or from
Driving systems
225
Driving and parking
Z
the side. When you overtake a vehicle, the
warning only occurs if the difference in speed
is less than 7 mph (12 km/h).
The yellow indicator lamp goes out if reverse
gear is engaged. Active Blind Spot Assist is
not operational.
The brightness of the warning lamps is auto-
matically adapted to the brightness of the
surroundings.
Visual and acoustic collision warning
If you switch on the turn signals to change
lanes and a vehicle is detected in the side
monitoring range, you receive a visual and
acoustic collision warning. You then hear a
double warning tone and red warning lamp :
flashes. If the turn signal remains on, detec-
ted vehicles are indicated by the flashing of
red warning lamp :. There are no further
warning tones.
Course-correcting brake application
If Active Blind Spot Assist detects a risk of a
lateral collision in the monitoring range, a
course-correcting brake application is carried
out. This is meant to assist you in avoiding a
collision.
G
WARNING
A course-correcting brake application cannot
always prevent a collision. There is a risk of an
accident.
Always steer, brake or accelerate yourself,
especially if Active Blind Spot Assist warns
you or makes a course-correcting brake appli-
cation. Always maintain a safe distance at the
sides.
If a course-correcting brake application
occurs, red warning lamp : flashes in the
exterior mirror and a dual warning tone
sounds. In addition, display ; appears in the
multifunction display underlining the danger
of a side collision.
In very rare cases, the system may make an
inappropriate brake application. An inappro-
priate course-correcting brake application
may be interrupted at any time if you steer
slightly in the opposite direction or acceler-
ate, for example.
The course-correcting brake application is
available in the speed range between 20 mph
(30 km/h) and 120 mph (200 km/h).
Either no braking application, or a course-
correcting brake application adapted to the
driving situation occurs if:
R
there are vehicles or obstacles, e.g. crash
barriers, located on both sides of your vehi-
cle.
R
a vehicle approaches you too closely at the
side.
226
Driving systems
Driving and parking
R
you have adopted a sporty driving style with
high cornering speeds.
R
you clearly brake or accelerate.
R
a driving safety system intervenes, e.g.
ESP
®
or PRE-SAFE
®
Brake.
R
ESP
®
is switched off.
R
a loss of tire pressure or a defective tire is
detected.
Switching on Active Blind Spot Assist
X
Make sure that Active Blind Spot Assist
(Y page 242) is activated in the on-board
computer.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
Warning lamps : in the exterior mirrors
light up red for approximately 1.5 seconds
and then turn yellow.
Active Lane Keeping Assist
General notes
Active Lane Keeping Assist monitors the area
in front of your vehicle by means of multi-
function camera : at the top of the wind-
shield. Various different areas to the front,
rear and side of your vehicle are also moni-
tored with the aid of the radar sensor system.
Active Lane Keeping Assist detects lane
markings on the road and can warn you
before you leave your lane unintentionally. If
you do not react to the warning, a lane-cor-
recting application of the brakes can bring the
vehicle back into the original lane.
This function is available in the range between
40 mph and 120 mph (60 km/h and
200 km/h).
For Active Lane Keeping Assist to assist you
when driving, the radar sensor system must
be operational
Important safety notes
If you fail to adapt your driving style, Active
Lane Keeping Assist can neither reduce the
risk of accident nor override the laws of phys-
ics. Active Lane Keeping Assist cannot take
account of road and weather conditions. It
may not recognize traffic situations. Active
Lane Keeping Assist is only an aid. You are
responsible for the distance to the vehicle in
front, for vehicle speed, for braking in good
time and for staying in your lane.
Active Lane Keeping Assist cannot continu-
ously keep your vehicle in its lane.
G
WARNING
Active Lane Keeping Assist cannot always
clearly detect lane markings.
In such cases, Active Lane Keeping Assist
can:
R
give an unnecessary warning and then
make a course-correcting brake application
to the vehicle
R
not give a warning or intervene
There is a risk of an accident.
Always pay particular attention to the traffic
situation and keep within the lane, especially
if Active Lane Keeping Assist alerts you. Ter-
minate the intervention in a non-critical driv-
ing situation.
The system may be impaired or may not func-
tion if:
R
there is poor visibility, e.g. due to insuffi-
cient illumination of the road, or due to
snow, rain, fog or spray
R
there is glare, e.g. from oncoming traffic,
the sun or reflections (e.g. when the road
surface is wet)
Driving systems
227
Driving and parking
Z
R
the windshield is dirty, fogged up, damaged
or covered, for instance by a sticker, in the
vicinity of the camera
R
the radar sensors in the front or rear bump-
ers or the radiator trim are dirty, e.g.
obscured by snow
R
there are no, several or unclear lane mark-
ings for a lane, e.g. in areas with road con-
struction work
R
the lane markings are worn away, dark or
covered up, e.g. by dirt or snow
R
the distance to the vehicle in front is too
small and the lane markings thus cannot be
detected
R
the lane markings change quickly, e.g.
lanes branch off, cross one another or
merge
R
the road is narrow and winding
R
there are strong shadows cast on the road
If no vehicle is detected in the adjacent lane
and broken lane markings are detected, no
lane-correcting brake application is made.
Warning vibration in the steering wheel
A warning may be given if a front wheel
passes over a lane marking. It will warn you by
means of intermittent vibration in the steer-
ing wheel for up to 1.5 seconds.
Lane-correcting brake application
G
WARNING
A lane-correcting brake application cannot
always bring the vehicle back into the original
lane. There is a risk of an accident.
Always steer, brake or accelerate yourself,
especially if Active Lane Keeping Assist warns
you or makes a lane-correcting brake appli-
cation.
G
WARNING
Active Lane Keeping Assist only detects traf-
fic conditions or road users to a limited
extent. In very rare cases, the system may
make an inappropriate brake application, e.g.
after intentionally driving over a solid lane
marking. There is a risk of an accident.
An inappropriate brake application may be
interrupted at any time if you steer slightly in
the opposite direction. Always make sure that
there is sufficient distance on the side for
other traffic or obstacles.
If you leave your lane, under certain circum-
stances the vehicle will brake briefly on one
side. This is meant to assist you in bringing
the vehicle back to the original lane.
If a lane-correcting brake application occurs,
display : appears in the multifunction dis-
play.
A lane-correcting brake application can be
made after driving over a lane marking rec-
ognize as being solid or broken. Before this, a
warning must be given by means of intermit-
tent vibration in the steering wheel. In addi-
tion, a lane with lane markings on both sides
must be recognized.
In the case of a broken lane marking being
detected, a lane-correcting brake application
can only be made if a vehicle has been detec-
ted in the adjacent lane. The following vehi-
cles can have an influence on brake applica-
tion: oncoming traffic, vehicles that are over-
taking and vehicles that are driving parallel to
your vehicle.
i
A further lane-correcting brake applica-
tion can only occur after your vehicle has
returned to the original lane.
228
Driving systems
Driving and parking
No lane-correcting brake application occurs
if:
R
you clearly and actively steer, brake or
accelerate.
R
you cut the corner on a sharp bend.
R
you have adopted a sporty driving style with
high cornering speeds or high rates of
acceleration.
R
you have switched on the turn signals.
R
a driving safety system intervenes, e.g.
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
ESP
®
is switched off.
R
the transmission is not in position D.
R
an obstacle has been detected in the lane in
which you are driving.
R
a loss of tire pressure or a defective tire has
been detected and displayed.
There is a possibility that the Active Lane
Keeping Assist could misjudge the given traf-
fic situation. An inappropriate brake applica-
tion may be interrupted at any time if you:
R
steer slightly in the opposite direction
R
switch on the turn signal
R
clearly brake or accelerate
A lane-correcting brake application is inter-
rupted automatically if:
R
a driving safety system intervenes, e.g.
ESP
®
, PRE-SAFE
®
Brake or Active Blind
Spot Assist.
R
lane markings can no longer be recognized.
Switching on Active Lane Keeping Assist
X
Switch on Active Lane Keeping Assist using
the on-board computer; to do so, select
StandardStandard or AdaptiveAdaptive (Y page 242).
If you drive at speeds above 40 mph
(60 km/h) and lane markings are detected,
the lines in the assistance graphics display
(Y page 241) are shown in green. Active
Lane Keeping Assist is ready for use.
If StandardStandard is selected, no warning vibra-
tion occurs if:
R
you have switched on the turn signals. In
this event, the warnings are suppressed
for a certain period of time.
R
a driving safety system intervenes, such
as ABS, BAS or ESP
®
.
When AdaptiveAdaptive is selected, no warning
vibration occurs if:
R
you have switched on the turn signals. In
this event, the warnings are suppressed
for a certain period of time.
R
a driving safety system intervenes, e.g.
ABS, BAS or ESP
®
.
R
you accelerate hard, e.g. kickdown.
R
you brake hard.
R
you steer actively, e.g. swerve to avoid an
obstacle or change lanes quickly.
R
you cut the corner on a sharp bend.
In order that you are warned only when nec-
essary and in good time if you cross the lane
marking, the system recognizes certain con-
ditions and warns you accordingly.
The warning vibration occurs earlier if:
R
you approach the outer lane marking on a
bend.
R
the road has very wide lanes, e.g. a high-
way.
R
the system recognizes solid lane markings.
The warning vibration occurs later if:
R
the road has narrow lanes.
R
you cut the corner on a bend.
Driving systems
229
Driving and parking
Z
230
Useful information ............................ 232
Important safety notes .................... 232
Displays and operation .................... 232
Menus and submenus ...................... 235
Display messages ............................. 251
Warning and indicator lamps in the
instrument cluster ............................ 280
231
On-board computer and displays
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Important safety notes
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for
the country in which you are currently driving
when operating the on-board computer.
G
WARNING
If the instrument cluster has failed or mal-
functioned, you may not recognize function
restrictions in systems relevant to safety. The
operating safety of your vehicle may be
impaired. There is a risk of an accident.
Drive on carefully. Have the vehicle checked
at a qualified specialist workshop immedi-
ately.
The on-board computer only shows messages
or warnings from certain systems in the mul-
tifunction display. You should therefore make
sure your vehicle is operating safely at all
times.
If the operating safety of your vehicle is
impaired, pull over as soon as it is safe to do
so. Contact a qualified specialist workshop.
Hybrid vehicles: always read the HYBRID
operating instructions. You could otherwise
fail to recognize dangers e.g. due to high volt-
age.
For an overview, see the instrument panel
illustration (Y page 33).
Displays and operation
Coolant temperature display
G
WARNING
Opening the hood when the engine is over-
heated or when there is a fire in the engine
compartment could expose you to hot gases
or other service products. There is a risk of
injury.
Let an overheated engine cool down before
opening the hood. If there is a fire in the
engine compartment, keep the hood closed
and contact the fire department.
!
A display message is shown if the coolant
temperature is too high.
If the coolant temperature is over 248
(120 †), do not continue driving. The
engine will otherwise be damaged.
The coolant temperature gauge is in the
instrument cluster on the left-hand side
(Y page 33).
Under normal operating conditions and with
the specified coolant level, the coolant tem-
perature may rise to 248 (120 †).
Tachometer
!
Do not drive in the overrevving range, as
this could damage the engine.
The red band in the tachometer indicates the
engine's overrevving range.
232
Displays and operation
On-board computer and displays
The fuel supply is interrupted to protect the
engine when the red band is reached.
Outside temperature display
You should pay special attention to road con-
ditions when temperatures are around freez-
ing point.
Bear in mind that the outside temperature
display indicates the temperature measured
and does not record the road temperature.
The outside temperature display is in the mul-
tifunction display (Y page 234).
Changes in the outside temperature are dis-
played after a short delay.
Speedometer with segments
The segments in the speedometer indicate
which speed range is available.
R
Cruise control activated (Y page 187):
The segments light up from the stored
speed to the maximum speed.
R
DISTRONIC PLUS activated (Y page 189):
One or two segments in the set speed
range light up.
R
DISTRONIC PLUS detects a vehicle in front:
The segments between the speed of the
vehicle in front and the stored speed light
up.
Operating the on-board computer
Overview
:
Multifunction display
;
Switches on the Voice Control System
(see the separate operating instructions)
=
Right control panel
?
Left control panel
A
Back button
X
To activate the on-board computer: turn
the SmartKey to position 1 in the ignition
lock.
You can control the multifunction display and
the settings in the on-board computer using
the buttons on the multifunction steering
wheel.
Displays and operation
233
On-board computer and displays
Z
Left control panel
=
;
R
Calls up the menu and menu bar
9
:
Press briefly:
R
Scrolls in lists
R
Selects a submenu or function
R
In the AudioAudio menu: selects a
stored station, an audio track or
a video scene
R
In the TelTel (telephone) menu:
switches to the phone book and
selects a name or telephone
number
9
:
Press and hold:
R
In the AudioAudio menu: selects the
previous/next station or selects
an audio track or a video scene
using rapid scrolling
R
In the TelTel (Telephone) menu:
starts rapid scrolling if the phone
book is open
a
R
Confirms a selection/display
message
R
In the TelTel (Telephone) menu:
switches to the telephone book
and starts dialing the selected
number
R
In the AudioAudio menu: stops the
station search function at the
desired station
Right control panel
~
R
Rejects or ends a call
R
Exits phone book/redial mem-
ory
6
R
Makes or accepts a call
R
Switches to the redial memory
W
X
R
Adjusts the volume
8
R
Mute
Back button
%
Press briefly:
R
Back
R
Switches off the Voice Control
System (see the separate oper-
ating instructions)
R
Hides display messages/calls
up the last TripTrip menu function
used
R
Exits the telephone book/redial
memory
%
Press and hold:
R
Calls up the standard display in
the TripTrip menu
Multifunction display
:
Text field
;
Menu bar
=
Drive program (Y page 166)
?
Transmission position (Y page 166)
A
Permanent display: outside temperature
or speed (Y page 244)
X
To display menu bar ;: press the =
or ; button on the steering wheel.
Menu bar ; disappears after a few seconds.
234
Displays and operation
On-board computer and displays
Text field : shows the selected menu or
submenu as well as display messages.
The following messages may appear in the
multifunction display:
Z
Gearshift recommendation when
shifting manually (Y page 171)
XjY
Active Parking Assist (Y page 209)
CRUISECRUISE
Cruise control (Y page 187)
_
Adaptive Highbeam Assist
(Y page 133)
¤
ECO start/stop function
(Y page 161)
ë
HOLD function (Y page 200)
Menus and submenus
Menu overview
Press the = or ; button on the steer-
ing wheel to call up the menu bar and select a
menu.
Operating the on-board computer
(Y page 233).
Depending on the equipment installed in the
vehicle, you can call up the following menus:
R
TripTrip menu (Y page 235)
R
NaviNavi menu (navigation instructions)
(Y page 237)
R
AudioAudio menu (Y page 238)
R
TelTel menu (telephone) (Y page 239)
R
DriveAssistDriveAssist menu (assistance)
(Y page 240)
R
ServServ menu (Y page 243)
R
SettSett menu (settings) (Y page 243)
R
AMGAMG menu in AMG vehicles (Y page 247)
Trip menu
Standard display
X
Press and hold the % button on the
steering wheel until the TripTrip menu with
trip odometer : and odometer ; is
shown.
Trip computer "From Start" or "From
Reset"
:
Distance
;
Time
=
Average speed
?
Average fuel consumption
X
Press the = or ; button on the steer-
ing wheel to select the TripTrip menu.
X
Press the 9 or : button to select
From StartFrom Start or From ResetFrom Reset.
The values in the From StartFrom Start submenu are
calculated from the start of a journey whilst
the values in the From ResetFrom Reset submenu are
calculated from the last time the submenu
was reset (Y page 236).
The From StartFrom Start trip computer is automati-
cally reset if:
R
the ignition has been switched off for more
than four hours.
R
999 hours have been exceeded.
R
9,999 miles have been exceeded.
Menus and submenus
235
On-board computer and displays
Z
The From ResetFrom Reset trip computer is automati-
cally reset if the value exceeds 9,999 hours or
99,999 miles.
ECO display
X
Press the = or ; button on the steer-
ing wheel to select the TripTrip menu.
X
Press the 9 or : button to select
ECO DISPLAYECO DISPLAY.
If the ignition remains switched off for longer
than four hours, the ECO display will be auto-
matically reset.
For further information on the ECO display,
see (Y page 182).
Displaying the range and current fuel
consumption
X
Press the = or ; button on the steer-
ing wheel to select the TripTrip menu.
X
Press the 9 or : button to select the
current fuel consumption (not for AMG
vehicles) and the approximate range.
The approximate range that can be covered
depends on the fuel level and your current
driving style. If there is only a small amount of
fuel left in the fuel tank, the display shows a
vehicle being refueled C instead of the
range.
Digital speedometer
X
Press the = or ; button on the steer-
ing wheel to select the TripTrip menu.
X
Press the 9 or : button to select the
digital speedometer.
In addition, the multifunction display may
show a gearshift recommendation Z.
Observe the information on gearshift rec-
ommendation Z when shifting manually
(Y page 171).
Gearshift recommendation Z is not given
on AMG vehicles.
Resetting values
X
Press the = or ; button on the steer-
ing wheel to select the TripTrip menu.
X
Press the 9 or : button to select the
function that you wish to reset.
X
Press the a button.
X
Press the : button to select YesYes and
press the a button to confirm.
You can reset the values of the following func-
tions:
R
Trip odometer
R
"From Start" trip computer
R
"From Reset" trip computer
R
ECO display
i
If you reset the values in the ECO display,
the values in the "From start" trip computer
236
Menus and submenus
On-board computer and displays
are also reset. If you reset the values in the
"From start" trip computer, the values in
the ECO display are also reset.
Navigation system menu
Displaying navigation instructions
In the NaviNavi menu, the multifunction display
shows navigation instructions.
Observe the additional information on navi-
gation in the separate COMAND operating
instructions.
X
Switch on COMAND (see the separate
operating instructions).
X
Press the = or ; button on the steer-
ing wheel to select the NaviNavi menu.
Route guidance not active
:
Direction of travel
;
Current road
Route guidance active
No change of direction announced
:
Distance to the destination
;
Distance to the next change of direction
=
Current road
?
"Follow the road's course" symbol
Change of direction announced without a
lane recommendation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Change-of-direction symbol
When a change of direction is announced, you
will see symbol = for the change of direction
and distance graphic ;. The distance indi-
cator shortens towards the top of the display
as you approach the point of the announced
change of direction.
Change of direction announced with a
lane recommendation
:
Road into which the change of direction
leads
;
Distance to change of direction and visual
distance display
=
Lanes not recommended
?
Recommended lane and new lane during a
change of direction
A
Change-of-direction symbol
On multilane roads, lane recommendations
can be displayed for the next change of direc-
tion if the digital map supports this data. Dur-
ing the change of direction, new lanes may be
added.
Lane not recommended =: you will not be
able to complete the next change of direction
if you stay in this lane.
Menus and submenus
237
On-board computer and displays
Z
Recommended lane and new lane during a
change of direction ?: in this lane you will be
able to complete the next two changes of
direction without changing lane.
Other status indicators of the naviga-
tion system
R
O: you have reached the destination or an
intermediate destination.
R
New Route...New Route... or Calculating RouteCalculating Route:
calculating a new route
R
Off Mapped RoadOff Mapped Road or Road Not MappedRoad Not Mapped:
the vehicle position is outside the area of
the digital map (off-map position)
R
No RouteNo Route: no route could be calculated to
the selected destination.
Audio menu
Selecting a radio station
:
Active station list
;
Station frequency with memory position
i
Station ; is displayed with the station
frequency or station name. The memory
position is only displayed along with sta-
tion ; if this has been stored.
X
Switch on COMAND and select Radio (see
the separate operating instructions).
X
Press the = or ; button on the steer-
ing wheel to select the AudioAudio menu.
X
To select a stored station: briefly press
the 9 or : button.
X
To select a station from the station list:
press and briefly hold the 9 or :
button.
If no station list is received:
X
To select a station using the station
search: press and hold the 9 or :
button.
i
SIRIUS XM satellite radio functions like a
normal radio.
You can find further information on radio
mode in the "Satellite radio" section of the
separate operating instructions.
Operating an audio player or audio
media
Audio data from various audio devices or
media can be played, depending on the equip-
ment installed in the vehicle.
X
Switch on COMAND and select audio CD or
MP3 mode, see the separate operating
instructions.
X
Press the = or ; button on the steer-
ing wheel to select the AudioAudio menu.
X
To select the next/previous track:
briefly press the 9 or : button.
X
To select a track from the track list
(rapid scrolling): press and hold the 9
or : button until desired track : has
been reached.
If you press and hold 9 or :, the
rapid scrolling speed is increased. Not all
audio drives or data carriers support this
function.
238
Menus and submenus
On-board computer and displays
If track information is stored on the audio
device or medium, the multifunction display
will show the number and title of the track.
Video DVD operation
X
Switch on COMAND and select video DVD
(see the separate operating instructions).
X
Press the = or ; button on the steer-
ing wheel to select the AudioAudio menu.
X
To select the next/previous scene:
briefly press the 9 or : button.
X
To select a scene from the scene list
(rapid scrolling): press and hold the 9
or : button until desired scene : has
been reached.
Telephone menu
Introduction
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
When telephoning, you must observe the
legal requirements for the country in which
you are currently driving.
X
Switch on the mobile phone (see the man-
ufacturer’s operating instructions).
X
Switch on COMAND (see the separate
operating instructions).
X
Establish a Bluetooth
®
connection to
COMAND, see the separate operating
instructions.
X
Press the = or ; button on the steer-
ing wheel to select the TelTel menu.
You will see one of the following display mes-
sages in the multifunction display:
R
Phone READYPhone READY or the name of the network
provider: the mobile phone has found a
network and is ready to receive.
R
Phone No ServicePhone No Service: there is no network
available or the mobile phone is searching
for a network.
Accepting a call
X
Press the 6 button on the steering
wheel to accept an incoming call.
If someone calls you when you are in the TelTel
menu, a display message appears in the mul-
tifunction display.
You can accept a call even if you are not in the
TelTel menu.
Rejecting or ending a call
X
Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the TelTel menu.
Menus and submenus
239
On-board computer and displays
Z
Dialing an entry from the phone book
X
Press the = or ; button on the steer-
ing wheel to select the TelTel menu.
X
Press the 9, : or a button to
switch to the phone book.
X
Authorize access to the phone book on the
phone.
X
Press the 9 or : button to select the
desired name.
or
X
To begin rapid scrolling: press and hold
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X
If only one telephone number is stored
for a name: press the 6 or a button
to start dialing.
or
X
If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X
Press the 9 or : button to select the
number you want to dial.
X
Press the 6 or a button to start dial-
ing.
or
X
To exit the phone book: press the ~ or
% button.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
X
Press the = or ; button on the steer-
ing wheel to select the TelTel menu.
X
Press the 6 button to switch to the
redial memory.
X
Press the 9 or : button to select the
desired name or number.
X
Press the 6 or a button to start dial-
ing.
or
X
To exit the redial memory: press the
~ or % button.
Assistance menu
Introduction
In the DriveAssistDriveAssist menu, you have the fol-
lowing options:
R
Displaying the assistance graphic
(Y page 241)
R
Activating/deactivating ESP
®
(Y page 241)
R
Activating/deactivating Steering Assist
and Stop&Go Pilot of DISTRONIC PLUS
(Y page 242)
R
Activating/deactivating PRE-SAFE
®
Brake
(Y page 241)
R
Activating/deactivating COLLISION PRE-
VENTION ASSIST PLUS (Y page 242)
R
Activating/deactivating ATTENTION
ASSIST (Y page 242)
R
Activating/deactivating Blind Spot Assist
or Active Blind Spot Assist (Y page 242)
R
Activating/deactivating Lane Keeping
Assist or Active Lane Keeping Assist
(Y page 242)
240
Menus and submenus
On-board computer and displays
Displaying the assistance graphic
X
Press the = or ; button on the steer-
ing wheel to select the DriveAssistDriveAssist menu.
X
Press 9 or : to select Assist.Assist.
GraphicGraphic.
X
Press the a button.
The multifunction display shows the
DISTRONIC PLUS distance display in the
assistance graphic.
X
Press 9 or : to display the ATTEN-
TION ASSIST assessment.
The assistance graphic displays the status of
and information from the following driving
systems or driving safety systems:
R
DISTRONIC PLUS (Y page 195)
R
PRE-SAFE
®
Brake (Y page 78)
R
COLLISION PREVENTION ASSIST PLUS
(Y page 242)
R
ATTENTION ASSIST (Y page 219)
R
Lane Keeping Assist (Y page 222)
R
Active Lane Keeping Assist (Y page 227)
Deactivating/activating ESP
®
i
Observe the "Important safety notes" sec-
tion in the description of ESP (Y page 75).
G
WARNING
If you deactivate ESP
®
, ESP
®
no longer sta-
bilizes the vehicle. There is an increased risk
of skidding and an accident.
Only deactivate ESP
®
in the situations descri-
bed in the following.
It may be best to deactivate ESP
®
in the fol-
lowing situations:
R
when using snow chains
R
in deep snow
R
on sand or gravel
Activating/deactivating ESP
®
on AMG vehi-
cles (Y page 76).
For further information about ESP
®
, see
(Y page 74).
X
Start the engine.
X
Press the = or ; button on the steer-
ing wheel to select the DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
ESPESP.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
ESP
®
is deactivated if the å warning lamp
in the instrument cluster lights up continu-
ously when the engine is running.
If the ÷ warning lamp and the å warn-
ing lamp are lit continuously, ESP
®
is not
available due to a malfunction.
Observe the information on warning lamps
(Y page 283).
Observe the information on display messages
(Y page 252).
Activating/deactivating PRE-SAFE
®
Brake
PRESAFE
®
Brake is only available in vehicles
with DISTRONIC PLUS.
X
Press = or ; on the steering wheel
to select the DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
PRE-SAFE BrakePRE-SAFE Brake.
Menus and submenus
241
On-board computer and displays
Z
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
When PRE-SAFE
®
Brake is deactivated, the
assistance graphic shows the æ symbol
in the multifunction display.
For more information on PRESAFE
®
Brake,
see (Y page 78).
Activating/deactivating COLLISION
PREVENTION ASSIST PLUS
X
Press the = or ; button on the steer-
ing wheel to select the DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
Collision Prevent.Collision Prevent..
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
If COLLISION PREVENTION ASSIST PLUS is
deactivated, the assistance graphic shows
the æ symbol in the multifunction dis-
play.
For further information about COLLISION
PREVENTION ASSIST PLUS, see (Y page 72).
Activating/deactivating Steering
Assist and Stop&Go Pilot
X
Press the = or ; button on the steer-
ing wheel to select the DriveAssistDriveAssist menu.
X
Using 9 or :, select DTR+:DTR+: Steer.Steer.
Asst.Asst.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
When Steering Assist and Stop&Go Pilot
are activated, the multifunction display
shows the DTR+: Steer. Asst.DTR+: Steer. Asst. OnOn mes-
sage.
Further information about DISTRONIC PLUS
with Steering Assist and Stop&Go Pilot
(Y page 198).
Activating/deactivating ATTENTION
ASSIST
X
Press = or ; on the steering wheel
to select the DriveAssistDriveAssist menu.
X
Press 9 or : to select AttentionAttention
AssistAssist.
X
Press the a button.
The current selection is displayed.
X
Press a to confirm.
X
Press the : or 9 button to set OffOff,
StandardStandard or SensitiveSensitive.
X
Press the a button to save the setting.
When ATTENTION ASSIST is deactivated,
the é symbol appears in the multifunc-
tion display in the assistance graphics dis-
play.
For further information about ATTENTION
ASSIST, see (Y page 219).
Activating/deactivating Blind Spot
Assist
X
Press = or ; on the steering wheel
to select the DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
Blind Spot AsstBlind Spot Asst.
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
Observe the additional information on the
Blind Spot Assist driving system
(Y page 220).
Observe the additional information on the
Active Blind Spot Assist driving system
(Y page 224).
Activating/deactivating Lane Keeping
Assist
X
Press the = or ; button on the steer-
ing wheel to select the DriveAssistDriveAssist menu.
X
Press the 9 or : button to select
Lane Keep. AssistLane Keep. Assist
242
Menus and submenus
On-board computer and displays
X
Press the a button.
The current selection is displayed.
X
Press a to confirm.
X
Press the : or 9 button to set OffOff,
StandardStandard or AdaptiveAdaptive.
X
Press the a button to save the setting.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the multifunc-
tion display shows the lane markings as
bright lines in the assistance graphic.
Observe the additional information on the
Lane Keeping Assist drive system
(Y page 222).
Observe the additional information on the
Active Lane Keeping Assist driving system
(Y page 227).
Maintenance menu
In the ServiceService menu, you have the following
options:
R
Calling up display messages in message
memory (Y page 251)
R
Checking the tire pressure electronically
(Y page 369)
R
Calling up the service due date
(Y page 335)
Settings menu
Introduction
In the SettSett menu, you have the following
options:
R
Changing the instrument cluster settings
(Y page 243)
R
Changing the light settings (Y page 244)
R
Changing the vehicle settings
(Y page 246)
R
Changing the convenience settings
(Y page 246)
R
Restoring the factory settings
(Y page 247)
Instrument cluster
Selecting the unit of measurement for dis-
tance
The Display Unit Speed-/Odometer:Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in
the multifunction display.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
Instr. ClusterInstr. Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/OdometerDisplay Unit Speed-/Odometer func-
tion.
You will see the selected setting: KmKm or
MilesMiles.
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
Digital speedometer in the TripTrip menu
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Navigation instructions in the NaviNavi menu
R
Cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Menus and submenus
243
On-board computer and displays
Z
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the steer-
ing wheel to select the SettSett menu.
X
Press the : or 9 button to select the
Inst. ClusterInst. Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent DisplayPermanent Display function.
You will see the selected setting OutsideOutside
TemperatureTemperature or Additional Speedome‐Additional Speedome‐
ter [km/h]ter [km/h]/AdditionalAdditional SpeedometerSpeedometer
[mph][mph].
X
Press the a button to save the setting.
i
The speed is highlighted in km/h or in
mph conversely to your speedometer.
Lights
Setting the brightness of the instrument
cluster lighting and switches
The lighting in the instrument cluster, in the
displays and the controls in the vehicle inte-
rior can be adjusted with the BrightnessBrightness
Display/Switches:Display/Switches: function.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches:Brightness Display/Switches: func-
tion.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from Level 1Level 1 to
Level 5Level 5 (bright).
X
Press the a or % button to save the
setting.
If the light switch is set to Ã, T or
L, the brightness is dependent upon
the brightness of the ambient light.
i
The light sensor in the instrument cluster
automatically controls the brightness of
the multifunction display.
In daylight, the displays in the instrument
cluster are not illuminated.
Switching the daytime running lamps on/
off
i
This function is not available in Canada.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press : or 9 to select the DayDay
LightsLights function.
If the Day LightsDay Lights function has been
switched on, the cone of light and the W
symbol in the multifunction display are
shown in orange.
X
Press the a button to save the setting.
Further information on daytime running
lamps (Y page 129).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-.Amb. Light +/-. function.
You will see the selected setting.
X
Press a to confirm.
244
Menus and submenus
On-board computer and displays
X
Press the : or 9 button to adjust the
brightness to any level from OffOff to Level 5Level 5
(bright).
X
Press the a or % button to save the
setting.
Setting the ambient lighting color
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light Col.Amb. Light Col. function.
X
Press a to confirm.
X
Press the : or 9 button to set the
color to SOLARSOLAR, NEUTRALNEUTRAL or POLARPOLAR.
X
Press the a or % button to save the
setting.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press : or 9 to select the Sur‐Sur‐
round Lightinground Lighting function.
If the SurroundSurround LightingLighting function is acti-
vated, the light cone and the area around
the vehicle are displayed in orange in the
multifunction display.
X
Press the a button to save the setting.
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
X
Before leaving the vehicle, turn the Smart-
Key to position 0 in the ignition lock.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated the Surround Light‐Surround Light‐
inging function and the light switch is set to
Ã, the following functions are activated
when it is dark:
R
surround lighting: the exterior lighting
remains lit for 40 seconds after unlocking
with the SmartKey. If you start the engine,
the surround lighting is switched off and
automatic headlamp mode is activated
(Y page 129).
R
exterior lighting delayed switch-off: the
exterior lighting remains lit for 60 seconds
after the engine is switched off. If you close
all the doors and the trunk lid/tailgate, the
exterior lighting goes off after 15 seconds.
i
Depending on your vehicle's equipment,
when the surround lighting and delayed
switch-off exterior lighting are on, the fol-
lowing light up:
R
Parking lamps
R
Side marker lamps
R
Surround lighting in the exterior mirrors
Activating/deactivating the interior light-
ing delayed switch-off
If you activate the Interior LightingInterior Lighting
DelayDelay function, the interior lighting remains
on for 20 seconds after you remove the
SmartKey from the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
LightsLights submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Light. DelayLight. Delay function.
If the Light. DelayLight. Delay function has been
switched on, the vehicle interior is dis-
played in orange in the multifunction dis-
play.
X
Press the a button to save the setting.
Menus and submenus
245
On-board computer and displays
Z
Vehicle
Activating/deactivating the automatic
door locking mechanism
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press : or 9 to select the VehicleVehicle
submenu.
X
Press a to confirm.
X
Press : or 9 to select the Auto.Auto.
Door LocksDoor Locks function.
When the Auto. Door LocksAuto. Door Locks function is
activated, the vehicle doors are displayed
in orange in the multifunction display.
X
Press the a button to save the setting.
If you activate the Auto. Door LocksAuto. Door Locks func-
tion, the vehicle is centrally locked above a
speed of around 9 mph (15 km/h).
For further information on the automatic lock-
ing feature, see (Y page 90).
Activating/deactivating the acoustic
locking verification signal
If you switch on the AcousticAcoustic LockLock function,
an acoustic signal sounds when you lock the
vehicle.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press : or 9 to select the VehicleVehicle
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Acoustic LockAcoustic Lock function.
If the AcousticAcoustic LockLock function is activated,
the & symbol in the multifunction dis-
play lights up orange.
X
Press the a button to save the setting.
Convenience
Activating/deactivating the EASY-
ENTRY/EXIT feature
G
WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steering wheel, you and other vehicle
occupants particularly children could
become trapped. There is a risk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
If somebody becomes trapped:
R
press one of the memory function position
buttons, or
R
move the switch for steering wheel adjust-
ment in the opposite direction to that in
which the steering wheel is moving.
The adjustment process is stopped.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Easy Entry/ExitEasy Entry/Exit function.
If the Easy Entry/ExitEasy Entry/Exit function is activa-
ted, the vehicle steering wheel is displayed
in orange in the multifunction display.
X
Press the a button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature (Y page 121).
Switching the belt adjustment on/off
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Belt AdjustmentBelt Adjustment function.
If the Belt AdjustmentBelt Adjustment function is activa-
ted, the vehicle seat belt is shown in orange
in the multifunction display.
X
Press the a button to save the setting.
For further information on belt adjustment,
see (Y page 47).
246
Menus and submenus
On-board computer and displays
Switching the fold-in mirrors when lock-
ing feature on/off
This function is only available on vehicles with
the memory function (Y page 125).
This function is only available on vehicles with
the memory function (Y page 125).
This function is only available in Canada.
When you switch on the Auto. fold inAuto. fold in
function, the exterior mirrors are folded in
when the vehicle is locked. If you unlock the
vehicle and then open a door, the exterior
mirrors fold out again.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
ConvenienceConvenience submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Auto. fold inAuto. fold in function.
If the Auto.Auto. foldfold inin function is switched
on, the vehicle's exterior mirror is displayed
in orange in the multifunction display.
X
Press the a button to save the setting.
If you have switched on the Auto. MirrorAuto. Mirror
FoldingFolding function and you fold in the exterior
mirrors by pressing button :, the exterior
mirrors will not fold out automatically
(Y page 123).
You can then only fold out the exterior mirrors
using button :.
Restoring the factory settings
X
Press the = or ; button on the steer-
ing wheel to select the Sett.Sett. menu.
X
Press the : or 9 button to select the
Factory SettingFactory Setting submenu.
X
Press a to confirm.
The Reset All Settings?Reset All Settings? message
appears.
X
Press the : or 9 button to select NoNo
or YesYes.
X
Press a to confirm the selection.
If you select YesYes, the multifunction display
shows a confirmation message.
For safety reasons, the Day LightsDay Lights function
in the LightsLights submenu is only reset if the
vehicle is stationary.
AMG menu in AMG vehicles
AMG displays
:
Digital speedometer
;
Gear indicator
=
Upshift indicator
?
Engine oil temperature
A
Coolant temperature
B
Status indicator for ECO start/stop func-
tion (Y page 161)
X
Press = or ; on the steering wheel
to select the AMGAMG menu.
Upshift indicator UPUP = indicates that the
engine has reached the overrevving range
when in the manual gearshift program.
Upshift indicator UPUP = fades out other mes-
sages until you have shifted up.
If the engine oil temperature is below 176
(80 †) the oil temperature is shown in blue.
Menus and submenus
247
On-board computer and displays
Z
Avoid driving at full engine output during this
time.
If the conditions for the ECO start/stop func-
tion are fulfilled and the vehicle is stationary,
status indicator B is shown.
SETUP
:
Drive program (CC/SS+SS+/MM)
;
ESP
®
mode (ONON/OFFOFF) or SPORT handling
mode (SPORTSPORT)
=
Suspension tuning (COMFORTCOMFORT/SPORTSPORT/
SPORT+SPORT+)
SETUP shows the drive program, the ESP
®
(Electronic Stability Program) mode and the
suspension tuning.
X
Press the = or ; button on the steer-
ing wheel to select the AMGAMG menu.
X
Press the 9 button repeatedly until
SETUP is displayed.
or
X
Briefly press the AMG button on the center
console (Y page 204).
RACETIMER
Displaying and starting RACETIMER
:
Lap
;
RACETIMER
The RACETIMER is only intended for use on a
closed race circuit. Do not use the function on
public roads.
You can start the RACETIMER when the
engine is running or if the key is in position 2
in the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to select the AMGAMG menu.
X
Press the 9 button repeatedly until the
RACETIMER is shown.
X
To start: press the a button to start the
RACETIMER.
Displaying the intermediate time
X
Press the = or ; button to select
Interm. TimeInterm. Time.
X
Press a to confirm.
The intermediate time is displayed for five
seconds.
Starting a new lap
:
RACETIMER
;
Fastest lap time (best lap)
=
Lap
X
Press a to confirm New LapNew Lap.
i
It is possible to store a maximum of six-
teen laps. The 16th lap can only be com-
pleted with Finish LapFinish Lap.
248
Menus and submenus
On-board computer and displays
Stopping the RACETIMER
X
Press the % button on the steering
wheel.
X
Confirm YesYes with a.
The RACETIMER interrupts timing if you stop
the vehicle and turn the key to position 1 in
the ignition lock. If you turn the key to position
3 and then press a to confirm StartStart, tim-
ing is continued.
Resetting the current lap
X
Stop the RACETIMER.
X
Press the = or ; button to select
Reset LapReset Lap.
X
Press a to reset the lap time to "0".
Deleting all laps
If you switch off the engine, the RACETIMER is
reset to "0" after 30 seconds. All laps are
deleted.
You cannot delete individual stored laps. If
you have stopped 16 laps, the current lap
does not have to be reset.
X
Reset the current lap.
X
Press a to confirm ResetReset.
Reset Race-Timer?Reset Race-Timer? appears in the multi-
function display.
X
Press the : button to select YesYes and
press the a button to confirm.
All laps are deleted.
Overall statistics
:
RACETIMER overall evaluation
;
Total time driven
=
Average speed
?
Distance covered
A
Maximum speed
This function is shown if you have stored at
least one lap and stopped the RACETIMER.
X
Press = or ; on the steering wheel
to select the AMGAMG menu.
X
Press the 9 button repeatedly until the
overall evaluation is shown.
Lap statistics
:
Lap
;
Lap time
=
Average lap speed
?
Lap length
A
Top speed during lap
Menus and submenus
249
On-board computer and displays
Z
This function is only available if you have
stored at least two laps and have stopped the
RACETIMER.
X
Press = or ; on the steering wheel
to select the AMGAMG menu.
X
Press the 9 button repeatedly until the
lap evaluation is shown.
Each lap is shown in a separate submenu.
The fastest lap is indicated by flashing sym-
bol :.
X
Press the 9 or : button to select a
different lap evaluation.
250
Menus and submenus
On-board computer and displays
Display messages
Introduction
General notes
Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may differ from the messages shown in the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in this
Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
When the ignition is switched off, all display messages are deleted, apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted.
When you stop and park the vehicle, please observe the notes on:
R
HOLD function (Y page 200)
R
Parking (Y page 179)
Hiding display messages
X
Press the a or % button on the steering wheel to hide the display message.
The display message is cleared.
The multifunction display shows high-priority display messages in red. Some high-priority dis-
play messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the mes-
sages have been remedied.
Message memory
The on-board computer saves certain display messages in the message memory. You can call
up the display messages:
X
Press the = or ; button on the steering wheel to select the Serv.Serv. menu.
If there are display messages, the multifunction display shows 2 Messages2 Messages, for example.
X
Press the 9 or : button to select the entry, e.g. 2 Messages2 Messages.
X
Press a to confirm.
X
Press the 9 or : button to scroll through the display messages.
Display messages
251
On-board computer and displays
Z
Safety systems
Display messages
Possible causes/consequences and MM Solutions
Currently Unavail‐Currently Unavail‐
able See Opera‐able See Opera‐
tor's Manualtor's Manual
ABS (Anti-lock Braking System), ESP
®
(Electronic Stability Pro-
gram), BAS (Brake Assist), PRESAFE
®
, the HOLD function and hill
start assist are temporarily unavailable.
BAS PLUS with Cross-Traffic Assist, COLLISION PREVENTION
ASSIST PLUS and PRESAFE
®
Brake may also have failed.
In addition, the ÷, å and ! warning lamps light up in the
instrument cluster.
ATTENTION ASSIST is deactivated.
For example, the on-board voltage may be insufficient.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
If the display message disappears, the functions mentioned
above are available again.
If the display message continues to be displayed:
X
Drive on carefully.
X
Visit a qualified specialist workshop.
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
ABS, ESP
®
, BAS, PRESAFE
®
, the HOLD function and hill start
assist are unavailable due to a malfunction.
BAS PLUS with Cross-Traffic Assist, COLLISION PREVENTION
ASSIST PLUS and PRESAFE
®
Brake may also have failed.
The $ (USA only)/J (Canada only), ÷, å and !
warning lamps in the instrument cluster also light up.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
252
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
X
Visit a qualified specialist workshop immediately.
÷
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
ESP
®
, BAS, PRESAFE
®
, the HOLD function and hill start assist are
unavailable due to a malfunction.
BAS PLUS with Cross-Traffic Assist, COLLISION PREVENTION
ASSIST PLUS and PRESAFE
®
Brake may also have failed.
In addition, the ÷ and å warning lamps light up in the
instrument cluster.
The self-diagnosis function might not be complete, for example.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above.
The braking distance in an emergency braking situation can thus
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
Display messages
253
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
T!
÷
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
EBD (electronic brake force distribution), ABS, ESP
®
, BAS, PRE-
SAFE
®
, the HOLD function and hill start assist are unavailable due
to a malfunction.
BAS PLUS with Cross-Traffic Assist, COLLISION PREVENTION
ASSIST PLUS and PRESAFE
®
Brake may also have failed.
In addition, the ÷, å and ! warning lamps light up in the
instrument cluster and a warning tone sounds.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
X
Visit a qualified specialist workshop immediately.
F(USA
only)J(Canada
only)
Please ReleasePlease Release
Parking BrakeParking Brake
You are driving with the parking brake applied. A warning tone also
sounds.
X
Release the parking brake.
$(USA
only)J(Canada
only)
Check Brake FluidCheck Brake Fluid
LevelLevel
There is not enough brake fluid in the brake fluid reservoir.
In addition, the $ (USA only)/J (Canada only) warning
lamp lights up in the instrument cluster and a warning tone
sounds.
G
WARNING
The braking effect may be impaired.
There is a risk of an accident.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
X
Secure the vehicle against rolling away (Y page 179).
X
Consult a qualified specialist workshop.
X
Do not add brake fluid. This does not correct the malfunction.
254
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
#
Check Brake PadCheck Brake Pad
WearWear
The brake pads/linings have reached their wear limit.
X
Visit a qualified specialist workshop.
G
mbrace Inoperativembrace Inoperative
One or more main features of the mbrace system are malfunc-
tioning.
X
Have the mbrace system checked immediately at a qualified
specialist workshop.
Collision Preven‐Collision Preven‐
tion Assist Plustion Assist Plus
Currently Unavail‐Currently Unavail‐
able See Opera‐able See Opera‐
tor's Manualtor's Manual
COLLISION PREVENTION ASSIST PLUS is temporarily not opera-
tional. Possible causes are:
R
the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
R
the system is outside the operating temperature range.
R
the on-board voltage is too low.
R
AMG vehicles: ESP
®
is deactivated.
When the causes stated above no longer apply, the display mes-
sage disappears.
COLLISION PREVENTION ASSIST PLUS is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Restart the engine.
X
AMG vehicles: reactivate ESP
®
(Y page 76).
Collision Preven‐Collision Preven‐
tion Assist Plustion Assist Plus
InoperativeInoperative
COLLISION PREVENTION ASSIST PLUS is temporarily inoperative
due to a malfunction. Adaptive Brake Assist may also have failed.
X
Visit a qualified specialist workshop.
PRE-SAFEPRE-SAFE
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
Important functions of PRE-SAFE
®
have failed. All other occupant
safety systems, e.g. air bags, remain available.
X
Visit a qualified specialist workshop immediately.
Display messages
255
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
PRE-SAFEPRE-SAFE
Functions Cur‐Functions Cur‐
rentlyrently LimitedLimited SeeSee
Operator's ManualOperator's Manual
PRE-SAFE
®
Brake is temporarily inoperative.
Possible causes are:
R
function is impaired due to heavy rain or snow.
R
the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
R
AMG vehicles: ESP
®
is deactivated.
R
the system is outside the operating temperature range.
R
the on-board voltage is too low.
When the causes stated above no longer apply, the display mes-
sage disappears.
PRESAFE
®
Brake is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Restart the engine.
X
AMG vehicles: reactivate ESP
®
(Y page 76).
PRE-SAFEPRE-SAFE
Functions LimitedFunctions Limited
SeeSee Operator'sOperator's Man‐Man‐
ualual
PRE-SAFE
®
Brake is inoperative due to a malfunction. BAS PLUS
with Cross-Traffic Assist may also have failed.
X
Visit a qualified specialist workshop.
256
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
Radar SensorsRadar Sensors
Dirty See Opera‐Dirty See Opera‐
tor's Manualtor's Manual
At least one of the following driving systems or driving safety sys-
tems is temporarily restricted or inoperative:
R
PRE-SAFE
®
Brake
R
COLLISION PREVENTION ASSIST PLUS
R
Active Lane Keeping Assist
R
Active Blind Spot Assist
R
DISTRONIC PLUS
Possible causes are:
R
the sensors in the radiator trim and/or in the bumpers are dirty.
R
the function of the driving system and/or driving safety system
is impaired due to heavy rain or snow.
A warning tone also sounds.
When the causes stated above no longer apply, the display mes-
sage disappears. All driving systems/driving safety systems are
operative again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Switch off the engine.
X
Clean the sensors in the following locations (Y page 340):
R
in the radiator trim
R
in the front bumper
R
in the rear bumper, particularly in the middle of the rear
bumper
X
Restart the engine.
The display message disappears.
6
SRS MalfunctionSRS Malfunction
Service RequiredService Required
The restraint system is faulty. The 6 warning lamp also lights
up in the instrument cluster.
G
WARNING
The air bags or Emergency Tensioning Devices may either be trig-
gered unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
X
Visit a qualified specialist workshop.
Observe the additional information on restraint systems
(Y page 42).
Display messages
257
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
6
FrontFront LeftLeft Malfunc‐Malfunc‐
tion Servicetion Service
RequiredRequired or FrontFront
Right MalfunctionRight Malfunction
Service RequiredService Required
The restraint system has malfunctioned at the front on the left or
right. The 6 warning lamp also lights up in the instrument clus-
ter.
G
WARNING
The air bags or Emergency Tensioning Devices may either be trig-
gered unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
X
Visit a qualified specialist workshop.
6
Rear Left Malfunc‐Rear Left Malfunc‐
tion Servicetion Service
RequiredRequired or RearRear
Right MalfunctionRight Malfunction
Service RequiredService Required
The restraint system has malfunctioned at the rear on the left or
right. The 6 warning lamp also lights up in the instrument clus-
ter.
G
WARNING
The air bags or Emergency Tensioning Devices may either be trig-
gered unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
X
Visit a qualified specialist workshop.
6
Rear Center Mal‐Rear Center Mal‐
function Servicefunction Service
RequiredRequired
The restraint system has malfunctioned at the rear center. The
6 warning lamp also lights up in the instrument cluster.
G
WARNING
The air bags or Emergency Tensioning Devices may either be trig-
gered unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
X
Visit a qualified specialist workshop.
6
Left Side CurtainLeft Side Curtain
AirbagAirbag MalfunctionMalfunction
Service RequiredService Required
or Right Side Cur‐Right Side Cur‐
tain Airbag Mal‐tain Airbag Mal‐
function Servicefunction Service
RequiredRequired
There is a malfunction in the left-hand or right-hand window cur-
tain air bag.
The 6 warning lamp also lights up in the instrument cluster.
G
WARNING
The left or right window curtain air bag may either be triggered
unintentionally or, in the event of an accident, may not be trig-
gered.
There is an increased risk of injury.
X
Visit a qualified specialist workshop.
258
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
Front PassengerFront Passenger
Airbag DisabledAirbag Disabled
SeeSee Operator'sOperator's Man‐Man‐
ualual
The front-passenger air bag is deactivated during the journey, even
though:
R
an adult
or
R
a person larger than a certain size is occupying the front-
passenger seat
If additional forces are applied to the seat, the system may inter-
pret the occupant's weight as lower than it actually is.
G
WARNING
The front-passenger air bag does not deploy during an accident.
There is an increased risk of injury.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Switch the ignition off.
X
Have the occupant get out of the vehicle.
X
Keep the seat unoccupied, close the front-passenger door and
switch on the ignition.
X
Observe the PASSENGER AIR BAG OFF indicator lamp in the
center console and the multifunction display and check the fol-
lowing:
Seat unoccupied and ignition switched on:
R
the PASSENGER AIR BAG OFF indicator lamp must light up and
remain lit. If the indicator lamp is on, OCS has disabled the front-
passenger air bag (Y page 52).
R
the Front Passenger Airbag Enabled See Operator'sFront Passenger Airbag Enabled See Operator's
ManualManual or Front Passenger Airbag Disabled See Oper‐Front Passenger Airbag Disabled See Oper‐
ator's Manualator's Manual display messages must not be shown in the
multifunction display.
X
Wait for a period of at least 60 seconds until the necessary sys-
tem checks have been completed.
X
Make sure that the display messages do not appear in the mul-
tifunction display.
If these conditions are fulfilled, the front-passenger seat can be
occupied again. Whether the PASSENGER AIR BAG OFF indicator
lamp remains lit or goes out depends on how OCS classifies the
occupant.
If the conditions are not fulfilled, the system is not operating cor-
rectly.
X
Visit a qualified specialist workshop immediately.
Display messages
259
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
Observe the additional information on OCS (Y page 52).
Front PassengerFront Passenger
Airbag EnabledAirbag Enabled
SeeSee Operator'sOperator's Man‐Man‐
ualual
The front-passenger air bag is enabled during the journey, even
though:
R
a child, a small adult or an object weighing less than the sys-
tem's weight threshold is located on the front-passenger seat
or
R
the front-passenger seat is unoccupied
The system may detect objects or forces applying additional
weight on the seat.
G
WARNING
The air bag may deploy unintentionally.
There is an increased risk of injury.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Switch the ignition off.
X
Open the front-passenger door.
X
Remove the child and the child restraint system from the front-
passenger seat.
X
Make sure that there are no objects on the seat adding to the
weight.
The system may otherwise detect the additional weight and
interpret the seat occupant's weight as greater than it actually
is.
X
Keep the seat unoccupied, close the front-passenger door and
switch on the ignition.
X
Observe the PASSENGER AIR BAG OFF indicator lamp in the
center console and the multifunction display and check the fol-
lowing:
Seat unoccupied and ignition switched on:
R
the PASSENGER AIR BAG OFF indicator lamp must light up and
remain lit. If the indicator lamp is on, OCS (Occupant Classifi-
cation System) has disabled the front-passenger air bag
(Y page 52).
R
the Front Passenger Airbag Enabled See Operator'sFront Passenger Airbag Enabled See Operator's
ManualManual or Front Passenger Airbag Disabled See Oper‐Front Passenger Airbag Disabled See Oper‐
ator's Manualator's Manual display messages must not be shown in the
multifunction display.
260
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
X
Wait for a period of at least 60 seconds until the necessary sys-
tem checks have been completed.
X
Make sure that the display messages do not appear in the mul-
tifunction display.
If these conditions are fulfilled, the front-passenger seat can be
occupied again. Whether the PASSENGER AIR BAG OFF indicator
lamp remains lit or goes out depends on how OCS classifies the
occupant.
If the conditions are not fulfilled, the system is not operating cor-
rectly.
X
Visit a qualified specialist workshop immediately.
Observe the additional information on OCS (Y page 52).
Lights
i
Display messages about LEDs:
This display message will only appear if all LEDs have failed.
Display messages
Possible causes/consequences and MM Solutions
b
Check Left Corner‐Check Left Corner‐
ing Lighting Light or CheckCheck
Right CorneringRight Cornering
LightLight
The left or right-hand cornering light is defective.
X
Visit a qualified specialist workshop.
b
Check Left LowCheck Left Low
BeamBeam or CheckCheck
Right Low BeamRight Low Beam
The left or right-hand low-beam headlamp is defective.
X
Visit a qualified specialist workshop.
b
Check Rear LeftCheck Rear Left
Turn SignalTurn Signal or
Check Rear RightCheck Rear Right
Turn SignalTurn Signal
The rear left-hand or rear right-hand turn signal is defective.
X
Visit a qualified specialist workshop.
b
Check Front LeftCheck Front Left
Turn SignalTurn Signal or
Check Front RightCheck Front Right
Turn SignalTurn Signal
The front left-hand or front right-hand turn signal is defective.
X
Check whether you are permitted to replace the bulb yourself
(Y page 135).
or
X
Visit a qualified specialist workshop.
Display messages
261
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
b
Check Left MirrorCheck Left Mirror
Turn SignalTurn Signal or
CheckCheck RightRight MirrorMirror
Turn SignalTurn Signal
The turn signal in the left-hand or right-hand exterior mirror is
defective.
X
Visit a qualified specialist workshop.
b
CheckCheck CenterCenter BrakeBrake
LampLamp
The high-mounted brake lamp is faulty.
X
Visit a qualified specialist workshop.
b
Check Left TailCheck Left Tail
and Brake Lampsand Brake Lamps or
Check Right TailCheck Right Tail
and Brake Lampsand Brake Lamps
The left or right-hand tail lamp/brake lamp is defective.
X
Visit a qualified specialist workshop.
b
Check Left HighCheck Left High
BeamBeam or CheckCheck
Right High BeamRight High Beam
The left or right-hand high beam is defective.
X
Check whether you are permitted to replace the bulb yourself
(Y page 135).
or
X
Visit a qualified specialist workshop.
b
CheckCheck LeftLeft LicenseLicense
Plate LampPlate Lamp or
Check RightCheck Right
License Plate LampLicense Plate Lamp
The left or right-hand license plate lamp is defective.
X
Visit a qualified specialist workshop.
b
Rear Fog LampRear Fog Lamp
The rear fog lamp is faulty.
X
Visit a qualified specialist workshop.
b
Check Front LeftCheck Front Left
Parking LampParking Lamp or
Check Front RightCheck Front Right
Parking LampParking Lamp
The front left or front right parking or standing lamp is defective.
X
Visit a qualified specialist workshop.
b
CheckCheck LeftLeft ReverseReverse
LampLamp or CheckCheck
Right Reverse LampRight Reverse Lamp
The left or right-hand backup lamp is defective.
X
Visit a qualified specialist workshop.
262
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
b
Check Front LeftCheck Front Left
Sidemarker LampSidemarker Lamp or
Check Front RightCheck Front Right
Sidemarker LampSidemarker Lamp
The left or right front side marker lamp is defective.
X
Visit a qualified specialist workshop.
b
Check Rear LeftCheck Rear Left
Sidemarker LampSidemarker Lamp or
Check Rear RightCheck Rear Right
Sidemarker LampSidemarker Lamp
The rear left or right side marker lamp is defective.
X
Visit a qualified specialist workshop.
b
CheckCheck LeftLeft DaytimeDaytime
Running LightRunning Light or
Check Right Day‐Check Right Day‐
time Running Lighttime Running Light
The left or right-hand daytime running lamp is faulty.
X
Visit a qualified specialist workshop.
b
Active Light Sys‐Active Light Sys‐
tem Inoperativetem Inoperative
The active light function is defective.
X
Visit a qualified specialist workshop.
b
Malfunction SeeMalfunction See
Operator's ManualOperator's Manual
The exterior lighting is defective.
X
Visit a qualified specialist workshop.
b
AutoAuto LampLamp FunctionFunction
InoperativeInoperative
The light sensor is defective.
X
Visit a qualified specialist workshop.
b
Switch Off LightsSwitch Off Lights
The lights are still switched on when you leave the vehicle. A
warning tone also sounds.
X
Turn the light switch to Ã.
Display messages
263
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
Adaptive HighbeamAdaptive Highbeam
Assist CurrentlyAssist Currently
Unavailable SeeUnavailable See
Operator's ManualOperator's Manual
Adaptive Highbeam Assist is deactivated and temporarily inoper-
ative. Possible causes are:
R
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
X
Clean the windshield.
If the system detects that the camera is fully operational again, the
Adaptive Highbeam Assist Now AvailableAdaptive Highbeam Assist Now Available message is dis-
played.
Adaptive Highbeam Assist is operational again.
Adaptive HighbeamAdaptive Highbeam
Assist InoperativeAssist Inoperative
Adaptive Highbeam Assist is faulty.
X
Visit a qualified specialist workshop.
Engine
Display messages
Possible causes/consequences and MM Solutions
+
Check CoolantCheck Coolant
Level See Opera‐Level See Opera‐
tor's Manualtor's Manual
The coolant level is too low.
!
Avoid making long journeys with too little coolant in the engine
cooling system. The engine will otherwise be damaged.
X
Add coolant, observing the warning notes before doing so
(Y page 333).
X
If coolant needs to be added more often than usual, have the
engine coolant system checked at a qualified specialist work-
shop.
?
The fan motor is faulty.
X
At coolant temperatures below 248 (120 †), drive to the
nearest qualified specialist workshop.
X
Avoid subjecting the engine to heavy loads, e.g. driving in moun-
tainous terrain, and stop-and-go traffic.
264
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
?
Coolant Too HotCoolant Too Hot
Stop Vehicle TurnStop Vehicle Turn
Engine OffEngine Off
The coolant is too hot.
A warning tone also sounds.
G
WARNING
Do not drive when your engine is overheated. This can cause some
fluids which may have leaked into the engine compartment to
catch fire.
Steam from the overheated engine can also cause serious burns
which can occur just by opening the hood.
There is a risk of injury.
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Wait until the engine has cooled down.
X
Make sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
X
Do not start the engine again until the display message goes out
and the coolant temperature is below 248 (120 †). Other-
wise, the engine could be damaged.
X
Pay attention to the coolant temperature display.
X
If the temperature increases again, visit a qualified specialist
workshop immediately.
Under normal operating conditions and with the specified coolant
level, the coolant temperature may rise to 248 (120 †).
#
SeeSee Operator'sOperator's Man‐Man‐
ualual
The battery is not being charged.
A warning tone also sounds.
Possible causes are:
R
a defective alternator
R
a torn poly-V-belt
R
a malfunction in the electronics
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
!
Do not continue driving. The engine could otherwise overheat.
X
Secure the vehicle against rolling away (Y page 179).
X
Consult a qualified specialist workshop.
Display messages
265
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
#
Stop Vehicle SeeStop Vehicle See
Operator's ManualOperator's Manual
The battery is no longer being charged and the battery charge level
is too low.
A warning tone also sounds.
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Observe the instructions in the display message # SeeSee
Operator's ManualOperator's Manual.
X
Consult a qualified specialist workshop.
#
Start Engine SeeStart Engine See
Operator's ManualOperator's Manual
The engine is switched off and the battery charge level is too low.
X
Switch off electrical consumers that you do not need, such as
the rear window defroster and interior lighting.
X
Leave the engine running for a few minutes or drive a long dis-
tance.
The battery is being charged.
4
Check Engine OilCheck Engine Oil
At Next RefuelingAt Next Refueling
The engine oil level has dropped to the minimum level.
A warning tone also sounds.
X
Check the oil level when next refueling, at the latest
(Y page 332).
X
If necessary, add engine oil (Y page 332).
X
Have the engine checked at a qualified specialist workshop if
engine oil needs to be added more often than usual.
!
Avoid long journeys with too little engine oil. The engine will
otherwise be damaged.
Information on approved engine oils can be obtained from any
qualified specialist workshop or on the Internet at http://
bevo.mercedes-benz.com.
4
Add Check EngineAdd Check Engine
Oil Level (Add 1Oil Level (Add 1
quart)quart)
AMG vehicles: the engine oil level is too low.
X
Check the oil level when next refueling, at the latest
(Y page 332).
X
If necessary, add engine oil (Y page 332).
X
Have the engine checked at a qualified specialist workshop if
engine oil needs to be added more often than usual.
!
Avoid long journeys with too little engine oil. The engine will
otherwise be damaged.
Information on approved engine oils can be obtained from any
qualified specialist workshop or on the Internet at http://
bevo.mercedes-benz.com.
266
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
8
Fuel Level LowFuel Level Low
The fuel level has dropped into the reserve range.
X
Refuel at the nearest gas station.
C
There is only a very small amount of fuel in the fuel tank.
X
Refuel at the nearest gas station without fail.
8
Gas Cap LooseGas Cap Loose
The fuel system pressure is too low. The fuel filler cap is not closed
correctly or the fuel system is leaking.
X
Check that the fuel filler cap is correctly closed.
If the fuel filler cap is not correctly closed:
X
Close the fuel filler cap.
If the fuel filler cap is correctly closed:
X
Visit a qualified specialist workshop.
8
Ultra Low-sulfurUltra Low-sulfur
Diesel Fuel OnlyDiesel Fuel Only
Vehicles with a diesel engine: the fuel level has fallen below the
reserve range.
X
Refuel at the nearest gas station.
X
Only use commercially available vehicular ULTRA-LOW SULFUR
HIGHWAY DIESEL FUEL (ULSD, 15 ppm sulfur MAXIMUM).
¸
Replace Air FilterReplace Air Filter
Vehicles with a diesel engine: the engine air filter is dirty and must
be replaced.
X
Visit a qualified specialist workshop.
!
Check Fuel FilterCheck Fuel Filter
Vehicles with a diesel engine: there is water in the fuel filter. The
water must be drained off.
X
Visit a qualified specialist workshop.
Ø
CheckCheck AdditiveAdditive SeeSee
Operator's ManualOperator's Manual
The DEF tank is empty.
X
Have the DEF tank filled as soon as possible at a qualified spe-
cialist workshop (Y page 177).
Ø
Remaining Starts:Remaining Starts:
1616
The DEF level has fallen to a minimum.
X
Have the DEF tank filled immediately at a qualified specialist
workshop (Y page 177).
Display messages
267
On-board computer and displays
Z
Driving systems
Display messages
Possible causes/consequences and MM Solutions
À
Attention Assist:Attention Assist:
Take a Break!Take a Break!
Based on certain criteria, ATTENTION ASSIST has detected fatigue
or a lack of concentration on the part of the driver. A warning tone
also sounds.
X
If necessary, take a break.
During long journeys, take regular breaks in good time so you get
enough rest.
À
Attention AssistAttention Assist
InoperativeInoperative
ATTENTION ASSIST is inoperative.
X
Visit a qualified specialist workshop.
¨or°
Vehicle RisingVehicle Rising
Your vehicle is adjusting to the level you have selected.
¨or°
Vehicle RisingVehicle Rising
Please WaitPlease Wait
The vehicle level is too low when the vehicle is stationary. A warn-
ing tone also sounds.
X
Do not pull away.
The vehicle level is set when the display message disappears.
¨or°
Stop Vehicle Vehi‐Stop Vehicle Vehi‐
cle Too Lowcle Too Low
You have pulled away while the vehicle level is still too low.
AIRMATIC sets the vehicle to the selected level after a short
period.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Wait until the display message disappears before pulling away.
AIRMATIC is defective. A warning tone also sounds.
X
Do not drive at speeds above 50 mph (80 km/h).
X
Make only slight steering movements. Otherwise, the front
fender or the tires could be damaged if the steering movement
is too large.
X
Listen for scraping sounds.
X
Pull over and stop the vehicle safely, paying attention to road
and traffic conditions, and select a higher vehicle level.
Depending on the malfunction, it may be possible to raise the
vehicle.
X
Visit a qualified specialist workshop.
268
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
¨or°
MalfunctionMalfunction
The AIRMATIC function is restricted. The vehicle's handling char-
acteristics may be affected.
X
Do not drive at speeds above 50 mph (80 km/h).
X
Visit a qualified specialist workshop.
ë
OffOff
The HOLD function is deactivated. The vehicle is skidding.
A warning tone also sounds.
X
Reactivate the HOLD function later (Y page 200).
The HOLD function is deactivated. When the brake pedal is firmly
depressed, an activation condition is not fulfilled.
A warning tone also sounds.
X
Check the activation conditions for the HOLD function
(Y page 200).
Lane KeepingLane Keeping
Assist CurrentlyAssist Currently
Unavailable SeeUnavailable See
Operator's ManualOperator's Manual
or Active LaneActive Lane
KeepingKeeping AssistAssist Cur‐Cur‐
rentlyrently UnavailableUnavailable
SeeSee Operator'sOperator's Man‐Man‐
ualual
Lane Keeping Assist or Active Lane Keeping Assist is deactivated
and temporarily inoperative. Possible causes are:
R
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
R
there are no lane markings for a longer period.
R
the lane markings are worn, dark or covered, e.g. by dirt or snow.
When the causes stated above no longer apply, the display mes-
sage disappears.
Lane Keeping Assist or Active Lane Keeping Assist is operational
again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Clean the windshield.
Lane KeepingLane Keeping
Assist Inopera‐Assist Inopera‐
tivetive or ActiveActive
Lane KeepingLane Keeping
Assist InoperativeAssist Inoperative
Lane Keeping Assist or Active Lane Keeping Assist is defective.
X
Visit a qualified specialist workshop.
Display messages
269
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
Blind Spot AssistBlind Spot Assist
Currently Unavail‐Currently Unavail‐
able See Opera‐able See Opera‐
tor's Manualtor's Manual or
Active Blind SpotActive Blind Spot
Assist CurrentlyAssist Currently
Unavailable SeeUnavailable See
Operator's ManualOperator's Manual
Blind Spot Assist or Active Blind Spot Assist is temporarily inop-
erative. Possible causes are:
R
function is impaired due to heavy rain or snow.
R
the radar sensor system is outside the operating temperature
range.
R
the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
The yellow 9 indicator lamps also light up in the exterior mir-
rors.
When the causes stated above no longer apply, the display mes-
sage disappears.
Blind Spot Assist or Active Blind Spot Assist is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Restart the engine.
Blind Spot AssistBlind Spot Assist
InoperativeInoperative or
Active Blind SpotActive Blind Spot
Assist InoperativeAssist Inoperative
Blind Spot Assist or Active Blind Spot Assist is defective.
The yellow 9 indicator lamps also light up in the exterior mir-
rors.
X
Visit a qualified specialist workshop.
Park Assist Can‐Park Assist Can‐
celedceled
The driver's door is open and the driver's seat belt has not been
fastened.
X
Repeat the parking process with the seat belt fastened and the
driver's door closed.
You have inadvertently touched the multifunction steering wheel
while steering intervention was active.
X
While steering intervention is active, make sure that the multi-
function steering wheel is not touched unintentionally.
The vehicle has started to skid and ESP
®
has intervened.
X
Use Active Parking Assist again later (Y page 209).
270
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
ParkPark AssistAssist Inoper‐Inoper‐
ativeative
You have just carried out a large number of turning or parking
maneuvers.
Active Parking Assist will become available again after approx-
imately ten minutes (Y page 209).
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Switch off and restart the engine.
If the display message continues to be displayed:
X
Visit a qualified specialist workshop.
PARKTRONIC is defective.
X
Visit a qualified specialist workshop.
Park Assist Fin‐Park Assist Fin‐
ishedished
The vehicle is parked. A warning tone also sounds.
The display message disappears automatically.
DISTRONIC PLUS OffDISTRONIC PLUS Off
DISTRONIC PLUS has been deactivated (Y page 189).
If it was not deactivated by the driver, a warning tone also sounds.
DISTRONICDISTRONIC PLUSPLUS NowNow
AvailableAvailable
DISTRONIC PLUS is operational again after having been tempo-
rarily unavailable. You can now reactivate DISTRONIC PLUS
(Y page 189).
DISTRONICDISTRONIC PLUSPLUS Cur‐Cur‐
rentlyrently UnavailableUnavailable
SeeSee Operator'sOperator's Man‐Man‐
ualual
DISTRONIC PLUS is temporarily inoperative.
Steering Assist and Stop&Go Pilot are temporarily inoperative.
Possible causes are:
R
function is impaired due to heavy rain or snow.
R
the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
R
the system is outside the operating temperature range.
R
the on-board voltage is too low.
A warning tone also sounds.
When the causes stated above no longer apply, the display mes-
sage disappears.
DISTRONIC PLUS is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Restart the engine.
Display messages
271
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
DISTRONIC PLUSDISTRONIC PLUS
InoperativeInoperative
DISTRONIC PLUS is defective.
The following may have also failed:
R
BAS PLUS with Cross-Traffic Assist
R
PRE-SAFE
®
Brake
R
Steering Assist and Stop&Go Pilot
A warning tone also sounds.
X
Visit a qualified specialist workshop.
DISTRONICDISTRONIC PLUSPLUS Sus‐Sus‐
pendedpended
You have depressed the accelerator pedal. DISTRONIC PLUS is no
longer controlling the speed of the vehicle.
X
Remove your foot from the accelerator pedal.
DISTRONIC PLUSDISTRONIC PLUS
- - - mph- - - mph
An activation condition for DISTRONIC PLUS is not fulfilled.
X
Check the activation conditions for DISTRONIC PLUS
(Y page 189).
DTR+: SteeringDTR+: Steering
Assist. CurrentlyAssist. Currently
Unavailable SeeUnavailable See
Operator's ManualOperator's Manual
Steering Assist and Stop&Go Pilot are temporarily inoperative.
Possible causes are:
R
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
R
there are no lane markings for a longer period.
R
the lane markings are worn, dark or covered, e.g. by dirt or snow.
When the causes stated above no longer apply, the display mes-
sage disappears.
Steering Assist and Stop&Go Pilot are operative again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Clean the windshield.
DTR+: SteeringDTR+: Steering
Assist. Inopera‐Assist. Inopera‐
tivetive
Steering Assist and Stop&Go Pilot are faulty.
However, the DISTRONIC PLUS functions are still available.
A warning tone also sounds.
X
Visit a qualified specialist workshop.
272
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
Cruise ControlCruise Control
InoperativeInoperative
Cruise control is defective.
A warning tone also sounds.
X
Visit a qualified specialist workshop.
Cruise ControlCruise Control
- - - mph- - - mph
A condition for activating cruise control has not been fulfilled.
You have tried to store a speed below 20 mph (30 km/h), for
example.
X
If conditions permit, drive faster than 20 mph (30 km/h) and
store the speed.
X
Check the activation conditions for cruise control (Y page 187).
Display messages
273
On-board computer and displays
Z
Tires
Display messages
Possible causes/consequences and MM Solutions
CorrectCorrect
Tire PressureTire Pressure
The tire pressure is too low in at least one of the tires, or the tire
pressure difference between the wheels is too great.
X
Check the tire pressures at the next opportunity (Y page 369).
X
If necessary, correct the tire pressure.
X
Restart the tire pressure monitor (Y page 371).
CheckCheck
Tire(s)Tire(s)
The tire pressure in one or more tires has dropped significantly.
The wheel position is displayed in the multifunction display.
A warning tone also sounds.
G
WARNING
With tire pressures which are too low, there is a risk of the fol-
lowing hazards:
R
they may burst, especially as the load and vehicle speed
increase.
R
they may wear excessively and/or unevenly, which may greatly
impair tire traction.
R
the driving characteristics, as well as steering and braking, may
be greatly impaired.
There is a risk of an accident.
X
Stop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditions as you do so.
X
Secure the vehicle against rolling away (Y page 179).
X
Check the tires and, if necessary, follow the instructions for a
flat tire (Y page 345).
X
Check the tire pressure (Y page 369).
X
If necessary, correct the tire pressure.
274
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
WarningWarning
Tire MalfunctionTire Malfunction
The tire pressure in one or more tires has dropped suddenly. The
wheel position is shown in the multifunction display.
G
WARNING
If you drive with a flat tire, there is a risk of the following hazards:
R
a flat tire affects the ability to steer or brake the vehicle.
R
you could lose control of the vehicle.
R
continued driving with a flat tire will cause excessive heat build-
up and possibly a fire.
There is a risk of an accident.
X
Stop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditions as you do so.
X
Secure the vehicle against rolling away (Y page 179).
X
Check the tires and, if necessary, follow the instructions for a
flat tire (Y page 345).
TireTire Press.Press. MonitorMonitor
Currently Unavail‐Currently Unavail‐
ableable
Due to a source of radio interference, no signals can be received
from the wheel sensors. The tire pressure monitor is temporarily
malfunctioning.
X
Drive on.
The tire pressure monitor restarts automatically as soon as the
problem has been solved.
TirePress. Sen‐TirePress. Sen‐
sor(s)Missingsor(s)Missing
There is no signal from the tire pressure sensor of one or several
wheels. The pressure of the affected tire is not displayed in the
multifunction display.
X
Have the faulty tire pressure sensor replaced at a qualified spe-
cialist workshop.
Tire Pressure Mon‐Tire Pressure Mon‐
itor Inoperativeitor Inoperative
No Wheel SensorsNo Wheel Sensors
The wheels mounted do not have a suitable tire pressure sensor.
The tire pressure monitor is deactivated.
X
Mount wheels with suitable tire pressure sensors.
The tire pressure monitor is activated automatically after driving
for a few minutes.
Tire pressure mon‐Tire pressure mon‐
itoritor
InoperativeInoperative
The tire pressure monitor is faulty.
X
Visit a qualified specialist workshop.
Display messages
275
On-board computer and displays
Z
Vehicle
Display messages
Possible causes/consequences and MM Solutions
Apply BrakeApply Brake
to Shift from 'P'to Shift from 'P'
You have attempted to shift the transmission to position D, R or N
without depressing the brake pedal.
X
Depress the brake pedal.
Risk of RollingRisk of Rolling
AwayAway
Vehicle Not in 'P'Vehicle Not in 'P'
The driver's door is open/not completely closed and the trans-
mission is in position R, N or D.
A warning tone also sounds.
G
WARNING
The vehicle may roll away.
There is a risk of an accident.
X
Shift the transmission to position P.
X
Secure the vehicle against rolling away (Y page 179).
X
Close the driver's door completely.
Service RequiredService Required
Do Not Shift GearsDo Not Shift Gears
Service RequiredService Required
You cannot change the transmission position due to a malfunction.
A warning tone also sounds.
If transmission position D is selected:
X
Drive to a qualified specialist workshop without shifting the
transmission from position D.
If transmission position R, N or P is selected:
X
Notify a qualified specialist workshop or breakdown service.
Only Shift to 'P'Only Shift to 'P'
when Vehiclewhen Vehicle
is Stationaryis Stationary
The vehicle is moving.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Shift the transmission to position P.
Transmission Mal‐Transmission Mal‐
function Stopfunction Stop
A malfunction has occurred in the mechanical transmission com-
ponents.
A warning tone also sounds. The gearbox automatically shifts to
position N.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Shift the transmission to position P.
X
Secure the vehicle against rolling away (Y page 179).
X
Notify a qualified specialist workshop or breakdown service.
276
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
N
Sedan: the trunk lid is open.
X
Close the trunk lid.
A
Wagon: the tailgate is open.
G
WARNING
When the engine is running, exhaust gases can enter the vehicle
interior if the tailgate is open.
There is a risk of poisoning.
X
Close the tailgate.
Mor ?
The hood is open. A warning tone also sounds.
G
WARNING
The open hood may block your view when the vehicle is in motion.
There is a risk of an accident.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Close the hood.
C
At least one door is open. A warning tone also sounds.
X
Close all the doors.
_
RearRear LeftLeft BackrestBackrest
Not LatchedNot Latched or
Rear Right Back‐Rear Right Back‐
rest Not Latchedrest Not Latched
Sedan with through-loading facility in the rear compartment:
The backrest in the rear is not engaged on the left-hand and/or
right-hand side. A warning tone also sounds.
X
Push the backrest back until it engages.
Ð
PowerPower SteeringSteering Mal‐Mal‐
function See Oper‐function See Oper‐
ator's Manualator's Manual
The power steering is malfunctioning.
A warning tone also sounds.
G
WARNING
You will need to use more force to steer.
There is a risk of an accident.
X
Check whether you are able to apply the extra force required.
X
If you are able to steer safely: carefully drive on to a qualified
specialist workshop.
X
If you are unable to steer safely: do not drive on. Contact the
nearest qualified specialist workshop.
Display messages
277
On-board computer and displays
Z
Display messages
Possible causes/consequences and MM Solutions
Phone No ServicePhone No Service
Your vehicle is outside the network provider's transmitter/
receiver range.
X
Wait until the mobile phone operational readiness symbol
appears in the multifunction display.
¥
Check Washer FluidCheck Washer Fluid
The washer fluid level in the washer fluid reservoir has dropped
below the minimum.
X
Add washer fluid (Y page 334).
SmartKey
Display messages
Possible causes/consequences and MM Solutions
Â
Key Does NotKey Does Not
Belong to VehicleBelong to Vehicle
You have put the wrong SmartKey in the ignition lock.
X
Use the correct SmartKey.
Â
TakeTake YourYour KeyKey fromfrom
IgnitionIgnition
The SmartKey is in the ignition lock.
X
Remove the SmartKey.
Â
Obtain a New KeyObtain a New Key
The SmartKey needs to be replaced.
X
Visit a qualified specialist workshop.
Â
ReplaceReplace KeyKey BatteryBattery
The batteries of the KEYLESS-GO key are discharged.
X
Change the batteries (Y page 87).
Â
Don't Forget YourDon't Forget Your
KeyKey
The display message is shown for a maximum of 60 seconds and
is only a reminder.
You have opened the driver's door with the engine switched off.
The KEYLESS-GO key is not in the ignition lock.
X
Remember to take the KEYLESS-GO key with you when you
leave the vehicle.
278
Display messages
On-board computer and displays
Display messages
Possible causes/consequences and MM Solutions
Â
Key Not DetectedKey Not Detected
(red display message)
The KEYLESS-GO key is not in the vehicle.
A warning tone also sounds.
If the engine is switched off, you can no longer lock the vehicle
centrally or start the engine.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Locate the KEYLESS-GO key.
The KEYLESS-GO key is not detected while the engine is running
because there is interference from a strong source of radio waves.
A warning tone also sounds.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Operate the vehicle with the SmartKey in the ignition lock.
Â
Key Not DetectedKey Not Detected
(white display mes-
sage)
The KEYLESS-GO key cannot be detected at present.
X
Change the location of the SmartKey with the KEYLESS-GO
functions in the vehicle.
If the KEYLESS-GO key is still not detected:
X
Operate the vehicle with the SmartKey in the ignition lock.
Â
RemoveRemove 'Start''Start' But‐But‐
ton and Insert Keyton and Insert Key
The KEYLESS-GO key can continuously not be detected.
KEYLESS-GO is temporarily malfunctioning or is defective. A warn-
ing tone also sounds.
X
Insert the SmartKey into the ignition lock and turn it to the
desired position.
X
Visit a qualified specialist workshop.
Display messages
279
On-board computer and displays
Z
Warning and indicator lamps in the instrument cluster
Safety
Seat belts
Problem
Possible causes/consequences and MM Solutions
ü
After starting the
engine, the red seat
belt warning lamp lights
up for 6 seconds.
The seat belt warning lamp reminds the driver and front passenger
to fasten their seat belts.
X
Fasten your seat belt (Y page 46).
ü
After starting the
engine, the red seat
belt warning lamp lights
up. In addition, a warn-
ing tone sounds for up
to 6 seconds.
The driver's seat belt is not fastened.
X
Fasten your seat belt (Y page 46).
The warning tone ceases.
ü
The red seat belt warn-
ing lamp lights up after
the engine starts, as
soon as the driver's or
the front-passenger
door is closed.
The driver or front passenger has not fastened their seat belt.
X
Fasten your seat belt (Y page 46).
The warning lamp goes out.
There are objects on the front-passenger seat.
X
Remove the objects from the front-passenger seat and stow
them in a secure place.
The warning lamp goes out.
ü
The red seat belt warn-
ing lamp flashes and an
intermittent audible
warning sounds.
The driver or front passenger has not fastened their seat belt. The
vehicle is being driven faster than 15 mph (25 km/h) or has briefly
been driven faster than 15 mph (25 km/h).
X
Fasten your seat belt (Y page 46).
The warning lamp goes out and the intermittent warning tone
ceases.
There are objects on the front-passenger seat. The vehicle is being
driven faster than 15 mph (25 km/h) or has briefly been driven
faster than 15 mph (25 km/h).
X
Remove the objects from the front-passenger seat and stow
them in a secure place.
The warning lamp goes out and the intermittent warning tone
ceases.
280
Warning and indicator lamps in the instrument cluster
On-board computer and displays
Safety systems
Problem
Possible causes/consequences and MM Solutions
$ (USA only)
J (Canada only)
The red brake system
warning lamp comes on
while the vehicle is
moving. A warning tone
also sounds.
You are driving with the parking brake applied.
X
Release the parking brake.
The warning lamp goes out and the warning tone ceases.
$ (USA only)
J (Canada only)
The red brake system
warning lamp comes on
while the engine is run-
ning. A warning tone
also sounds.
G
WARNING
The brake boosting effect is malfunctioning and the braking char-
acteristics may be affected.
There is a risk of an accident.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
X
Secure the vehicle against rolling away (Y page 179).
X
Consult a qualified specialist workshop.
X
Observe the additional display messages in the multifunction
display.
$ (USA only)
J (Canada only)
The red brake system
warning lamp comes on
while the engine is run-
ning. A warning tone
also sounds.
There is not enough brake fluid in the brake fluid reservoir.
G
WARNING
The braking effect may be impaired.
There is a risk of an accident.
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
X
Secure the vehicle against rolling away (Y page 179).
X
Do not add brake fluid. Adding more will not remedy the mal-
function.
X
Consult a qualified specialist workshop.
X
Observe the additional display messages in the multifunction
display.
Warning and indicator lamps in the instrument cluster
281
On-board computer and displays
Z
Problem
Possible causes/consequences and MM Solutions
!
The yellow ABS warning
lamp is lit while the
engine is running.
ABS (Anti-lock Braking System) is deactivated due to a malfunc-
tion. Therefore, BAS (Brake Assist System), BAS PLUS with Cross-
Traffic Assist, COLLISION PREVENTION ASSIST PLUS, ESP
®
(Elec-
tronic Stability Program), PRESAFE
®
, PRESAFE
®
Brake, the
HOLD function and hill start assist, for example, are also deacti-
vated.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The wheels could therefore lock if you
brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
If the ABS control unit is faulty, there is also a possibility that other
systems, such as the navigation system or the automatic trans-
mission, will not be available.
282
Warning and indicator lamps in the instrument cluster
On-board computer and displays
Problem
Possible causes/consequences and MM Solutions
!
The yellow ABS warning
lamp is lit while the
engine is running. A
warning tone also
sounds.
EBD is not available due to a malfunction. Therefore, ABS, BAS,
BAS PLUS with Cross-Traffic Assist, COLLISION PREVENTION
ASSIST PLUS, ESP
®
, PRESAFE
®
, PRESAFE
®
Brake, the HOLD
function and hill start assist, for example, are also unavailable.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
$ (USA only)
J (Canada only)
֌!
The red brake warning
lamp, the yellow ESP
®
and ESP
®
OFF warning
lamps and the yellow
ABS warning lamp are
lit while the engine is
running.
ABS and ESP
®
are not available due to a malfunction. Therefore,
BAS, BAS PLUS with Cross-Traffic Assist, COLLISION PREVEN-
TION ASSIST PLUS, EBD, PRESAFE
®
, PRESAFE
®
Brake, the HOLD
function and hill start assist, for example, are also unavailable.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore
lock if you brake hard, for example.
The steerability and braking characteristics may be severely affec-
ted. The braking distance in an emergency braking situation can
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
Warning and indicator lamps in the instrument cluster
283
On-board computer and displays
Z
Problem
Possible causes/consequences and MM Solutions
÷
The yellow ESP
®
warn-
ing lamp flashes while
the vehicle is in motion.
ESP
®
or traction control has intervened because there is a risk of
skidding or at least one wheel has started to spin.
Cruise control or DISTRONIC PLUS is deactivated.
X
When pulling away, only depress the accelerator pedal as far as
necessary.
X
Ease off the accelerator pedal while the vehicle is in motion.
X
Adapt your driving style to suit the road and weather conditions.
X
Do not deactivate ESP
®
.
In rare cases (Y page 76) it may be best to deactivate ESP
®
.
Observe the important safety notes on ESP
®
(Y page 75).
å
The yellow ESP
®
OFF
warning lamp is lit while
the engine is running.
ESP
®
is deactivated.
G
WARNING
If ESP
®
is switched off, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Reactivate ESP
®
.
In rare cases (Y page 76), it may be best to deactivate ESP
®
.
Observe the important safety notes on ESP
®
(Y page 75).
X
Adapt your driving style to suit the road and weather conditions.
If ESP
®
cannot be activated:
X
Drive on carefully.
X
Have ESP
®
checked at a qualified specialist workshop.
M
AMG vehicles only:
The yellow SPORT han-
dling mode warning
lamp is lit while the
engine is running.
SPORT handling mode is activated.
G
WARNING
When SPORT handling mode is switched on, ESP
®
is unable to
stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Only switch to SPORT handling mode in accordance with the
conditions described in the "Activating/deactivating SPORT
handling mode" section (Y page 76).
284
Warning and indicator lamps in the instrument cluster
On-board computer and displays
Problem
Possible causes/consequences and MM Solutions
֌
The yellow ESP
®
and
ESP
®
OFF warning
lamps are lit while the
engine is running.
ESP
®
, BAS, BAS PLUS with Cross-Traffic Assist, COLLISION PRE-
VENTION ASSIST PLUS, PRESAFE
®
, PRESAFE
®
Brake, the HOLD
function and hill start assist are unavailable due to a malfunction.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the
functions listed above.
The braking distance in an emergency braking situation can thus
increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
6
The red restraint sys-
tem warning lamp is lit
while the engine is run-
ning.
The restraint system is faulty.
G
WARNING
The air bags or Emergency Tensioning Devices may either be trig-
gered unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
X
Observe the additional display messages in the multifunction
display.
X
Drive on carefully.
X
Have the restraint system checked immediately at a qualified
specialist workshop.
Observe the additional information on restraint systems
(Y page 42).
Warning and indicator lamps in the instrument cluster
285
On-board computer and displays
Z
Engine
Problem
Possible causes/consequences and MM Solutions
;
The yellow Check
Engine warning lamp
lights up while the
engine is running.
There may be a malfunction, for example:
R
in the engine management
R
in the fuel injection system
R
in the exhaust system
R
in the ignition system (for vehicles with gasoline engines)
R
in the fuel system
The emission limit values may be exceeded and the engine may be
in emergency mode.
X
Have the vehicle checked as soon as possible at a qualified
specialist workshop.
i
In some states, you must immediately visit a qualified special-
ist workshop as soon as the yellow Check Engine warning lamp
lights up. This is due to the legal requirements in effect in these
states. If in doubt, check whether such legal regulations apply in
the state in which you are currently driving.
Vehicles with a diesel engine: the fuel tank has been run dry
(Y page 177).
X
After refueling start the engine three to four times.
If the yellow Check Engine warning lamp goes out, emergency
running mode is canceled. The vehicle need not be checked.
8
The yellow reserve fuel
warning lamp lights up
while the engine is run-
ning.
The fuel level has dropped into the reserve range.
X
Refuel at the nearest gas station.
8
The yellow reserve fuel
warning lamp flashes
while the vehicle is in
motion.
In addition, the ;
Check Engine warning
lamp may light up.
The fuel system pressure is too low. The fuel filler cap is not closed
correctly or the fuel system is leaking.
X
Check that the fuel filler cap is correctly closed.
X
If the fuel filler cap is not correctly closed: close the fuel filler
cap.
X
If the fuel filler cap is closed: visit a qualified specialist work-
shop.
286
Warning and indicator lamps in the instrument cluster
On-board computer and displays
Problem
Possible causes/consequences and MM Solutions
?
The red coolant warn-
ing lamp lights up while
the engine is running
and the coolant tem-
perature gauge is at the
start of the scale.
The temperature sensor for the coolant temperature gage is defec-
tive.
The coolant temperature is no longer being monitored. There is a
risk of engine damage if the coolant temperature is too high.
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions. Do not continue
driving under any circumstances.
X
Secure the vehicle against rolling away (Y page 179).
X
Consult a qualified specialist workshop.
Warning and indicator lamps in the instrument cluster
287
On-board computer and displays
Z
Problem
Possible causes/consequences and MM Solutions
?
The red coolant warn-
ing lamp comes on
while the engine is run-
ning.
The coolant level is too low.
If the coolant level is correct, the airflow to the engine radiator may
be blocked or the electric engine radiator fan may be malfunc-
tioning.
The coolant is too hot and the engine is no longer being cooled
sufficiently.
X
Observe the additional display messages in the multifunction
display.
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
X
Leave the vehicle and keep a safe distance from the vehicle until
the engine has cooled down.
X
Check the coolant level and add coolant, observing the warning
notes (Y page 333).
X
If you need to add coolant more often than usual, have the
engine coolant system checked.
X
Make sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
X
Do not start the engine again until the coolant temperature is
below 248 ‡(120 †). Otherwise, the engine could be damaged.
X
Drive to the nearest qualified specialist workshop.
X
Avoid subjecting the engine to heavy loads, e.g. driving in moun-
tainous terrain, and stop-and-go traffic.
?
The red coolant warn-
ing lamp comes on
while the engine is run-
ning. A warning tone
also sounds.
The coolant temperature has exceeded 248 (120 †). The air-
flow to the engine radiator may be blocked or the coolant level may
be too low.
G
WARNING
The engine is not being cooled sufficiently and may be damaged.
Do not drive when your engine is overheated. This can cause some
fluids which may have leaked into the engine compartment to
catch fire.
Steam from the overheated engine can also cause serious burns
which can occur just by opening the hood.
There is a risk of injury.
X
Observe the additional display messages in the multifunction
display.
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
X
Secure the vehicle against rolling away (Y page 179).
288
Warning and indicator lamps in the instrument cluster
On-board computer and displays
Problem
Possible causes/consequences and MM Solutions
X
Leave the vehicle and keep a safe distance from the vehicle until
the engine has cooled down.
X
Check the coolant level and add coolant, observing the warning
notes (Y page 333).
X
If you need to add coolant more often than usual, have the
engine coolant system checked.
X
Make sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
X
At coolant temperatures below 248 (120 †), drive to the
nearest qualified specialist workshop.
X
Avoid subjecting the engine to heavy loads, e.g. driving in moun-
tainous terrain, and stop-and-go traffic.
Driving systems
Problem
Possible causes/consequences and MM Solutions
·
The red distance warn-
ing lamp lights up while
the vehicle is in motion.
A warning tone also
sounds.
You are approaching a vehicle or a stationary obstacle in your line
of travel at too high a speed.
X
Be prepared to brake immediately.
X
Pay careful attention to the traffic situation. You may have to
brake or take evasive action.
Observe the additional information on PRESAFE
®
Brake
(Y page 78).
Observe the additional information on the distance warning func-
tion of COLLISION PREVENTION ASSIST PLUS (Y page 72).
Warning and indicator lamps in the instrument cluster
289
On-board computer and displays
Z
Tires
Problem
Possible causes/consequences and MM Solutions
h
The yellow tire pressure
monitor warning lamp
(pressure loss/
malfunction) is lit.
The tire pressure monitor has detected a loss of pressure in at
least one of the tires.
G
WARNING
With tire pressures which are too low, there is a risk of the fol-
lowing hazards:
R
they may burst, especially as the load and vehicle speed
increase.
R
they may wear excessively and/or unevenly, which may greatly
impair tire traction.
R
the driving characteristics, as well as steering and braking, may
be greatly impaired.
There is a risk of an accident.
X
Stop the vehicle without making any sudden steering or braking
maneuvers. Pay attention to the traffic conditions as you do so.
X
Secure the vehicle against rolling away (Y page 179).
X
Observe the additional display messages in the multifunction
display.
X
Check the tires and, if necessary, follow the instructions for a
flat tire (Y page 345).
X
Check the tire pressure (Y page 369).
X
If necessary, correct the tire pressure.
h
The yellow tire pressure
monitor warning lamp
(pressure loss/
malfunction) flashes for
approximately one
minute and then
remains lit.
The tire pressure monitor is faulty.
G
WARNING
The system is possibly unable to recognize or register low tire
pressure.
There is a risk of an accident.
X
Observe the additional display messages in the multifunction
display.
X
Visit a qualified specialist workshop.
290
Warning and indicator lamps in the instrument cluster
On-board computer and displays
Useful information ............................ 292
Stowage areas .................................. 292
Features ............................................. 309
291
Stowage and features
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Stowage areas
Loading guidelines
G
WARNING
If objects, luggage or loads are not secured or
not secured sufficiently, they could slip, tip
over or be flung around and thereby hit vehicle
occupants. There is a risk of injury, particu-
larly in the event of sudden braking or a sud-
den change in direction.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
loads against slipping or tipping before the
journey.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Exhaust
gases can enter the vehicle interior if the
trunk lid/tailgate is open when the engine is
running, especially if the vehicle is in motion.
There is a risk of poisoning.
Always switch off the engine before opening
the trunk lid/tailgate. Never drive with the
trunk lid/tailgate open.
G
WARNING
The exhaust tail pipe and tail pipe trim can
become very hot. If you come into contact
with these parts of the vehicle, you could burn
yourself. There is a risk of injury.
Always be particularly careful around the
exhaust tail pipe and the tail pipe trim. Allow
these components to cool down before touch-
ing them.
The handling characteristics of a laden vehi-
cle are dependent on the distribution of the
load within the vehicle. For this reason, you
should observe the following notes when
transporting a load:
R
Never exceed the maximum permissible
gross vehicle mass or the gross axle weight
rating for the vehicle (including occupants).
The values are specified on the vehicle
identification plate on the B-pillar of the
driver's door.
R
The trunk/cargo compartment is the pre-
ferred place to store objects.
R
Position heavy loads as far forwards as pos-
sible and as low down in the trunk/cargo
compartment as possible.
R
The load must not protrude above the
upper edge of the seat backrests.
R
Always place the load against the rear or
front seat backrests. Make sure that the
seat backrests are securely locked into
place.
R
Always place the load behind unoccupied
seats if possible.
R
Use the cargo tie-down rings and the parcel
nets to transport loads and luggage.
R
Use cargo tie-down rings and fastening
materials appropriate for the weight and
size of the load.
R
When transporting objects in the cargo
compartment, the combined cargo cover
and net must always be installed (cargo
compartment cover and cargo net).
R
Secure the load with sufficiently strong and
wear-resistant tie-downs. Pad sharp edges
for protection.
292
Stowage areas
Stowage and features
Stowage spaces
Important safety notes
G
WARNING
If objects in the passenger compartment are
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
R
Always stow objects so that they cannot be
thrown around in such situations.
R
Always make sure that objects do not pro-
trude from stowage spaces, parcel nets or
stowage nets.
R
Close the lockable stowage spaces while
driving.
R
Always stow and secure heavy, hard, poin-
ted, sharp-edged, fragile or bulky objects in
the trunk/cargo compartment.
Observe the loading guidelines (Y page 292).
Glove box
X
To open: pull handle : and open glove box
flap ;.
X
To close: fold glove box flap ; upwards
until it engages.
i
The glove box can be ventilated
(Y page 153).
The glove box can only be locked and
unlocked using the mechanical key.
X
To lock: insert the mechanical key into the
lock and turn it 90° clockwise to position
2.
X
To unlock: insert the mechanical key into
the lock and turn it 90° counter-clockwise
to position 1.
Eyeglasses compartment
There is a compartment to stow eyeglasses in
the headliner on the driver's side.
X
To open: pull down eyeglasses compart-
ment : by the handle.
Stowage areas
293
Stowage and features
Z
Stowage compartment in the center
console
All models except AMG vehicles
X
To open: slide cover : forwards until it
engages.
X
To close: briefly press cover : at the
front.
Cover : moves back.
i
A stowage compartment is located under
the cup holder at the front of the center
console.
Stowage compartment under the arm-
rest
AMG vehicles
X
To open: press left-hand button ; or right-
hand button :.
The stowage compartment opens.
All models except AMG vehicles
X
To open: pull handle : up.
The armrest folds out.
i
Depending on the vehicle equipment, a
USB connection or a Media Interface is
installed in the stowage compartment. A
Media Interface is a universal interface for
mobile audio equipment, e.g. for an iPod
®
or MP3 player (see the separate COMAND
Operating Instructions).
Stowage compartment under the front
seats
G
WARNING
If you exceed the maximum load for the stow-
age compartment, the cover may not be able
to restrain the items. Items may be thrown out
of the stowage compartment and hit vehicle
occupants. There is a risk of injury, particu-
larly in the event of sudden braking or a sud-
den change in direction.
Never exceed the maximum permissible load
for the stowage compartment. Stow and
secure heavy objects in the trunk/cargo com-
partment.
The maximum permissible load of the stow-
age compartment is 3.3 lbs (1.5 kg).
294
Stowage areas
Stowage and features
X
To open: pull handle : up and fold
cover ; forwards.
i
On vehicles with a fire extinguisher, the
fire extinguisher is located in the stowage
compartment under the driver's seat.
Stowage compartment in the rear
!
Do not sit on or support your body weight
on the rear seat armrest when it is folded
down, as you could otherwise damage it.
!
Close the cover of the stowage compart-
ment before folding the rear seat armrest
back into the seat backrest.
X
To open: fold down seat armrest ;.
X
Fold cover : of the armrest upwards.
Stowage net in the rear
:
Stowage net
Stowage nets
Stowage nets are located in the front-
passenger footwell and on the left-hand side
of the trunk/cargo compartment.
Observe the loading guidelines (Y page 292)
and the safety notes regarding stowage
spaces (Y page 293).
Skibag
Unfolding the skibag and loading skis
G
WARNING
The skibag in conjunction with the lashing
straps cannot restrain any objects other than
skis.
Vehicle occupants could be struck in the
event of sudden braking or an accident, for
instance, if you:
R
transport other heavy or sharp-edged
objects in the skibag
R
do not secure the skibag with the lashing
straps
There is a risk of accident and injury.
Store only skis in the skibag. Always secure
the skibag with the lashing straps so that it
cannot move around.
Stowage areas
295
Stowage and features
Z
X
Fold down the rear seat armrest.
X
Press release catches ; together and fold
down cover :.
X
Pull skibag : into the vehicle interior and
unfold it.
X
Open the trunk lid.
X
Press release catch :.
The flap opens downwards.
X
Slide the skis into the skibag from the
trunk.
X
Pull strap : tight by the loose end until the
skis are held firmly inside the skibag.
X
Engage hook : in securing ring ;.
X
Pull the strap tight by the loose end.
Removing skis and folding up the skibag
X
Loosen the two straps.
X
Remove hook : from securing ring ;.
X
Take the skis out of the skibag.
X
Close the flap in the trunk.
X
Smooth out the skibag and fold it up.
296
Stowage areas
Stowage and features
X
Put the skibag into the backrest.
X
Fold the cover back up.
i
You should always close the flap in the
trunk if you do not require the skibag. This
will prevent unauthorized access to the
trunk from the vehicle interior.
Removing the skibag
If you would like to clean or dry the skibag, it
can be removed.
X
Open the trunk lid.
X
Press release catch :.
Flap ; folds down.
X
Press catch = in and pull out frame ?
containing the skibag.
Through-loading facility in the rear
The through-loading facility is opened from
the trunk.
X
Fold down the rear seat armrest.
X
Press release catch :.
The flap opens downwards.
Observe the loading guidelines (Y page 292).
Through-loading facility in the rear
bench seat (Sedan)
Important safety notes
G
WARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for-
wards, e.g. when braking suddenly or in the
event of an accident.
R
The vehicle occupant would thereby be
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest. The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
R
Objects or loads in the trunk cannot be
restrained by the seat backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
Observe the loading guidelines (Y page 292).
The left-hand and right-hand rear seat backr-
ests can be folded down separately to
increase the trunk capacity.
Folding the seat backrest forward
Stowage areas
297
Stowage and features
Z
i
Vehicles with memory function: when you
fold one or both parts of the rear seat back-
rest forwards, the respective front seat
moves forward slightly, when necessary, in
order to avoid contact.
X
Vehicles without memory function: if nec-
essary, move the driver's or front-
passenger seat forward.
X
Open the trunk.
X
Pull right-hand or left-hand rear seat back-
rest release handle :.
The corresponding rear seat backrest is
released.
The rear seat head restraints are lowered.
X
Fold rear seat backrest ; forwards.
X
Move the driver's or front-passenger seat
back if necessary.
Folding the seat backrest back
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
X
Move the driver's or front-passenger seat
forward if necessary.
X
Fold rear seat backrest : back until it
engages.
If the rear seat backrest is not engaged and
locked, this will be shown in the multifunc-
tion display in the instrument cluster. A
warning tone also sounds.
X
Move the driver's or front-passenger seat
back if necessary.
i
You should always engage the rear seat
backrests if you do not need the through-
loading feature. This will prevent unauthor-
ized access to the trunk from the vehicle
interior.
EASY-PACK through-loading facility in
the rear bench seat (Wagon)
Important safety notes
G
WARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for-
wards, e.g. when braking suddenly or in the
event of an accident.
R
The vehicle occupant would thereby be
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest. The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
R
Objects or loads in the trunk/cargo com-
partment cannot be restrained by the seat
backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
Observe the loading guidelines (Y page 292).
298
Stowage areas
Stowage and features
Folding the rear seat backrests forward
!
When folding the rear seat backrest for-
wards, ensure that there are no items lying
on the seat cushions. These items could
otherwise be damaged or could themselves
damage the rear seats.
The left-hand and right-hand rear seat backr-
ests can be folded forwards separately to
increase the cargo compartment capacity.
The combined cargo cover and net can
remain installed.
i
When you fold one or both parts of the
rear seat backrests forwards, the headr-
ests are also lowered if necessary. In the
case of vehicles with memory function, the
respective front seat is moved forwards
slightly to avoid contact with the seat
behind it.
X
Vehicles without memory function: if nec-
essary, move the driver's or front-
passenger seat forward.
X
Pull the left-hand or right-hand release han-
dle at the rear in cargo compartment : or
at the side beside backrests ;.
The corresponding backrest folds for-
wards.
X
Move the driver's or front-passenger seat
back if necessary.
Folding the rear seat backrest back
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
X
Move the driver's or front-passenger seat
forward if necessary.
X
Fold seat backrest : back until it engages.
If the rear seat backrest is not engaged and
locked, this will be shown in the multifunc-
tion display in the instrument cluster. A
warning tone also sounds.
X
Adjust the head restraints if necessary
(Y page 113).
X
Move the driver's or front-passenger seat
back if necessary.
Stowage areas
299
Stowage and features
Z
Securing cargo
Plastic hooks (Sedan)
On vehicles without a through-loading feature
in the rear bench seat, six plastic hooks are
installed to the trunk floor.
Cargo tie-down rings
General notes
Observe the following notes on securing
loads:
R
Observe the loading guidelines
(Y page 292).
R
Secure the load using the cargo tie-down
rings.
R
Distribute the load on the cargo tie-down
rings evenly.
R
Do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-slip protection for light loads.
R
Do not route tie-downs across sharp edges
or corners.
R
Pad sharp edges for protection.
Trunk/cargo compartment
Cargo tie-down rings : (Sedan)
Cargo tie-down rings : (Wagon)
EASY-PACK cargo compartment cover
Important safety notes
G
WARNING
On its own, the cargo compartment cover
cannot secure or restrain heavy objects,
items of luggage and heavy loads. You could
be hit by an unsecured load during sudden
changes in direction, braking or in the event of
an accident. There is an increased risk of
injury or even fatal injury.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
loads against slipping or tipping over, e.g. by
using tie downs, even if you are using the
cargo compartment cover.
!
When loading the vehicle, make sure that
you do not stack the load in the cargo com-
partment higher than the lower edge of the
300
Stowage areas
Stowage and features
side windows. Do not place heavy objects
on top of the cargo compartment cover.
The cargo compartment cover and the cargo
net are attached to anchorages on the right
and left in the cargo compartment as a com-
bined cargo cover and net.
When the tailgate is opened, the cargo com-
partment cover is automatically raised to
make loading easier. It is automatically low-
ered again when the tailgate is closed.
When the cargo compartment cover is clip-
ped in, there should be no objects obstructing
the downwards movement of the cover in the
cargo compartment when the tailgate is
closed. The cargo compartment cover will
otherwise be raised again.
Extending/retracting the cargo com-
partment cover
X
To extend: pull cargo compartment
cover : back by grab handle ; and clip it
into the retainers on the left and right.
X
To retract: unhook cargo compartment
cover : from the retainers on the left and
right and guide it forwards by grab han-
dle ; until it is fully retracted.
Installing/removing the combined
cargo cover and net
You can reach the combined cargo cover and
net to install and remove it from the cargo
compartment and, with the seat backrest fol-
ded forwards, from the left-hand rear door.
X
Make sure that the cargo net and the cargo
compartment cover are rolled up.
X
To remove: press button ;.
X
Fold the combined cargo cover and net for-
wards on the left-hand side with the seat
backrest folded forwards, and fold it back-
wards with the seat backrest folded up.
X
First, detach the combined cargo cover and
net from left-hand catch : and then
remove it from right-hand fixture =.
X
To install: push the combined cargo cover
and net up to the stop into right-hand fix-
ture =.
X
Place the combined cargo cover and net
into the left-hand fixture and push it into
catch : until the combined cargo cover
and net engages audibly.
Stowage areas
301
Stowage and features
Z
X
Make sure that red lock status indicator ?
is no longer visible. The combined cargo
cover and net will otherwise not be locked
in place.
Attaching the combined cargo cover
and net to the rear seat backrest
!
If you have attached the combined cargo
cover and net to a rear seat backrest that is
folded forwards, do not fold the backrest
back.
X
Fold the left and right seat backrest for-
wards (Y page 298).
X
Insert combined cargo cover and net ;
into two guides : and push it up to the
stop in the direction of the arrow.
Cargo net (Wagon)
Important safety notes
G
WARNING
On its own, the cargo net cannot secure or
restrain heavy objects, items of luggage and
heavy loads. You could be hit by an unsecured
load during sudden changes in direction,
braking or in the event of an accident. There is
an increased risk of injury or even fatal injury.
Always store objects so that they cannot be
flung around. Secure objects, luggage or
loads against slipping or tipping over, e.g. by
using tie downs, even if you are using the
cargo net.
It is important to use a cargo net if you load
the vehicle with small objects above the seat
backrests. For safety reasons, always use a
cargo net when transporting loads.
Cargo net without cargo compartment
enlargement
X
Pull the cargo net up by tab : and hook it
into eyelets ;.
302
Stowage areas
Stowage and features
Cargo net with cargo compartment
enlargement
X
Make sure that the cargo net is attached to
the rear seat backrest (Y page 301).
X
Guide the cargo net up by tab : and hook
it into eyelets ;.
Coat hooks on the tailgate
:
Coat hook
EASY-PACK trunk box
Important safety notes
G
WARNING
When the load surface moves up, your hands
may become trapped on the frame of the
EASY-PACK trunk box. There is a risk of injury.
When the load surface moves up, make sure
that your hands are not within the sweep of
the load surface. If someone becomes trap-
ped, carefully push the center of the load sur-
face downward.
!
When the EASY-PACK trunk box is pulled
out, no objects may be placed on the frame
of the box, nor should the frame be pushed
from above. Otherwise, the box could be
damaged.
!
Sharp-edged, pointed or fragile objects
can damage the EASY-PACK trunk box and
then be thrown out. There is a risk of injury.
Do not transport sharp-edged, pointed or
fragile objects in the EASY-PACK trunk box.
Always store and secure these or similar
objects in the trunk outside of the EASY-
PACK trunk box.
!
If you exceed the maximum permitted
load of the EASY-PACK trunk box, objects
can be thrown out of the EASY-PACK trunk
box and strike vehicle occupants. There is a
risk of injury, particularly in the event of
sudden braking or a sudden change in
direction.
Always observe the maximum permitted
load of the EASY-PACK trunk box. Always
store and secure heavy objects in the trunk
outside of the EASY-PACK trunk box.
The maximum permitted load of the EASY-
PACK trunk box is 22 lbs (10 kg). With a load
of above approximately 11 lbs (5 kg), the bot-
tom of the box moves downward until it rests
on the mat of the trunk floor. Thus, overload-
ing of the box is avoided.
Adjusting the height to any position
Stowage areas
303
Stowage and features
Z
X
Pull the box out by handle : in the direc-
tion of the arrow all the way to the stop.
X
Lowering the load surface: push the cen-
ter of load surface ; down by hand in the
direction of the arrow until load surface ;
has reached the desired position and the
box is the desired size.
X
To raise the load surface: press switch
=.
Load surface ; of the box moves up auto-
matically.
X
To stow the box: push the box in by han-
dle : all the way to the stop.
Removing and installing
X
To install: insert retainer ; of box : into
slots =
X
Raise box : and press hooks A into
anchorage ? as far as they will go.
X
Turn left-hand rotating catch B clockwise
and right-hand rotating catch B counter-
clockwise by 90°.
X
To remove: turn left-hand rotating catch
B counter-clockwise and right-hand rotat-
ing catch B clockwise by 90°.
X
Move box : downwards and pull it out
from anchorages ?.
i
Store the EASY-PACK trunk box on a flat
surface after removal, e.g. on a suitable
shelf.
EASY-PACK load-securing kit (Wagon)
Components and storage
The EASY-PACK load-securing kit allows you
to use your cargo compartment for a variety
of purposes. The accessory parts are located
under the cargo compartment floor.
X
Open the EASY-PACK folding luggage-com-
partment floor (Y page 306).
EASY-PACK load-securing kit accessory parts
:
Telescopic rod
;
Bag containing the brackets and luggage
holder
304
Stowage areas
Stowage and features
Inserting the brackets into the loading
rail
X
Insert bracket : into the center of loading
rail ?.
X
Press release button ; and push
bracket : into the desired position in load-
ing rail ?.
X
Let go of release button ;.
X
Press locking button =.
Bracket : is locked in loading rail ?.
X
If necessary, fold cargo tie-down ring A
upwards.
Luggage holder
!
Only use the luggage holder to secure
cargo with a maximum weight of 15.4 lbs
(7 kg) and with dimensions that the luggage
holder can safely and securely contain.
The luggage holder can be used to secure
light loads against the side wall of the cargo
compartment to prevent them from moving
around.
X
To install: insert two brackets A into the
left or right loading rail (Y page 305).
X
Press release button : of the luggage
holder and pull the strap out slightly.
X
Insert luggage holder ; into brackets A
and, while doing so, press release button
= and push the luggage holder downwards
until it engages.
X
Press release button : of the luggage
holder and pull the strap out in the direction
of the arrow.
X
Place the load between the strap and the
cargo compartment side wall.
X
Using one hand, press locking button : of
the luggage holder.
X
With your other hand, let the strap go slowly
until the load is secured.
X
Make sure that locking button ? on brack-
ets A is pressed.
This keeps brackets A in place on the
loading rail.
X
To remove: press release button = on
respective bracket A and remove luggage
holder ; by pulling upwards and out.
Telescopic rod
The telescopic rod can be used to secure the
load against the rear seats to prevent it from
moving around.
X
To install: insert one bracket ; into both
the left and the right loading rails and slide
it to the desired position (Y page 305).
X
Insert telescopic rod : into brackets ;
and, while doing so, press release but-
Stowage areas
305
Stowage and features
Z
ton ? and push the rod downwards until it
engages.
X
Make sure that locking button = on brack-
ets ; is pressed.
This keeps brackets ; in place on the
loading rail.
X
To remove: press release button ? on
respective bracket ; and remove tele-
scopic rod : by pulling it upwards and out.
Stowage well under the trunk floor
(Sedan)
!
Unhook the handle before again before
closing the trunk lid and clip it in securely to
prevent the handle flap from protruding.
Otherwise, you could damage the handle.
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
X
To open: pull handle : up.
X
Hook handle : into rain trough ;.
EASY-PACK folding floor with stowage
compartment under the cargo com-
partment floor (Wagon)
Important safety notes
G
WARNING
If you drive when the EASY-PACK folding floor
is open, objects could be flung around, thus
striking vehicle occupants. There is a risk of
injury, particularly in the event of sudden
braking or a sudden change in direction.
Always close the EASY-PACK folding floor
before a journey.
!
Do not apply pressure to the EASY-PACK
folding luggage-compartment floor when it
is fully open. You may otherwise damage
the hinges of the EASY-PACK folding lug-
gage-compartment floor.
!
Vehicles with a B&O sound system: do not
remove the EASY-PACK folding floor.
Removing the EASY-PACK folding floor will
cause the cable set or the amplifier to be
damaged because the amplifier module is
screwed to the underside of the EASY-
PACK folding floor.
Opening and closing the folding cargo
compartment floor
The parts of the EASY-PACK load-securing kit
are contained beneath the EASY-PACK fold-
ing floor. Beneath the insert, you will find, for
example, the TIREFIT kit or the emergency
spare wheel and the vehicle tool kit.
306
Stowage areas
Stowage and features
X
To open: open the tailgate.
X
Holding the ribbing, press handle : down-
wards ;.
Handle : folds upwards.
X
Pull EASY-PACK folding luggage-compart-
ment floor = in the direction of the arrow
by handle : until it reaches the desired
position and engages in side ?.
X
To close: disengage the EASY-PACK fold-
ing luggage-compartment floor and pull it
back.
X
Press the EASY-PACK folding luggage-com-
partment floor down ; until it engages.
Installing and removing the folding
cargo compartment floor
120° position
X
Remove the combined cargo cover and net
(Y page 301).
X
To remove: move EASY-PACK folding lug-
gage-compartment floor : into the 120°
position and lift it upwards.
X
To install: push EASY-PACK folding lug-
gage-compartment floor : to the stop,
move it into the 120° position and make
sure it engages audibly.
X
Pull EASY-PACK folding luggage-compart-
ment floor : forwards.
EASY-PACK rear sill protector
(Wagon)
!
Before closing the tailgate, refasten the
EASY-PACK rear sill protector on the under-
side of the EASY-PACK folding luggage-
compartment floor.
The EASY-PACK rear sill protector could
otherwise be damaged.
The EASY-PACK rear sill protector is attached
to the underside of the EASY-PACK folding
cargo compartment floor by means of mag-
nets. It is designed to prevent clothing
becoming stained and the paintwork being
scratched when loading.
X
Open the EASY-PACK folding luggage-com-
partment floor (Y page 306).
X
Use tab ; to detach EASY-PACK rear sill
protector : from the magnets and place it
over the loading sill.
X
Close the EASY-PACK folding cargo com-
partment floor.
Stowage areas
307
Stowage and features
Z
Roof carrier
Important safety notes
G
WARNING
When you load the roof, the center of gravity
of the vehicle rises and the driving character-
istics change. If you exceed the maximum roof
load, the driving characteristics, as well as
steering and braking, will be greatly impaired.
There is a risk of an accident.
Never exceed the maximum roof load and
adjust your driving style.
!
Mercedes-Benz recommends that you
only use roof carriers that have been tested
and approved for Mercedes-Benz vehicles.
This helps to prevent damage to the vehi-
cle.
Position the load on the roof carrier in such
a way that the vehicle will not sustain dam-
age even when it is in motion.
Ensure that when the roof carrier is instal-
led:
R
you can raise the sliding sunroof or the
panorama roof with power tilt/sliding
panel fully (depending on the vehicle's
equipment)
R
you can open the tailgate or trunk lid fully
R
the roof carrier does not come into con-
tact with the antenna
!
To avoid damaging or scratching the cov-
ers, do not use metallic or hard objects to
open them.
You will find information on the maximum roof
load in the "Technical data" section
(Y page 419).
An incorrectly secured roof carrier or roof
load may become detached from the vehicle.
You must therefore ensure that you observe
the roof carrier manufacturer's installation
instructions.
Attaching the roof carrier (Sedan)
Vehicles with a steel roof or sliding sunroof (illus-
tration)
Vehicles with a panorama roof with power tilt/slid-
ing panel
X
Open covers : carefully in the direction of
the arrow.
X
Fold covers : upwards.
X
Only secure the roof carrier to the anchor-
age points under covers :.
X
Observe the manufacturer's installation
instructions.
Attaching the roof carrier (Wagon)
X
Secure the roof carrier to the roof rails.
X
Observe the manufacturer's installation
instructions.
308
Stowage areas
Stowage and features
Features
Cup holder
Important safety notes
AMG vehicles:
G
WARNING
The cup holder cannot hold a container secure
whilst traveling. If you use a cup holder whilst
traveling, the container may be flung around
and liquid may be spilled. The vehicle occu-
pants may come into contact with the liquid
and if it is hot, they may be scalded. You may
be distracted from the traffic conditions and
you could lose control of the vehicle. There is
a risk of an accident and injury.
Only use the cup holder when the vehicle is
stationary. Only use the cup holder for con-
tainers of the right size. Always close the con-
tainer, particularly if the liquid is hot.
!
Only use the cup holders for containers of
the right size and which have lids. The
drinks could otherwise spill.
G
WARNING
If objects in the passenger compartment are
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
R
Always stow objects so that they cannot be
thrown around in such situations.
R
Always make sure that objects do not pro-
trude from stowage spaces, parcel nets or
stowage nets.
R
Close the lockable stowage spaces while
driving.
R
Always stow and secure heavy, hard, poin-
ted, sharp-edged, fragile or bulky objects in
the trunk/cargo compartment.
Observe the loading guidelines (Y page 292).
Cup holder in the front-compartment
center console
All vehicles (except AMG)
You can remove the cup holder to clean it.
Clean with clear, lukewarm water only.
X
To open: slide cover = forwards until it
engages.
X
To remove: slide catch ; forwards and
pull out cup holder :.
X
To insert: insert cup holder : and slide
back catch ;.
X
To close: briefly press cover = at the
front.
Cover = moves back.
AMG vehicles
You can remove the cup holder to clean it.
Clean with clear, lukewarm water only.
X
To open: slide cover : back.
Features
309
Stowage and features
Z
Cup holder in the rear seat armrest
!
Do not sit on or support your body weight
on the rear seat armrest when it is folded
down, as you could otherwise damage it.
!
Close the cup holder before folding the
rear seat armrest up. Otherwise, the cup
holder could be damaged.
Vehicles with a rear bench seat
X
Fold down the rear seat armrest.
X
To open: raise the rear seat armrest cover.
X
Press release catch :.
Cup holder ; folds out forwards.
X
Swing the rear seat armrest cover back
down, if necessary.
X
To close: raise the rear seat armrest cover.
Swing cup holder ; back until it engages.
Vehicles with luxury single seats in the rear com-
partment
X
To open: press lightly on the upper section
of cup holder : and fold down the cover.
Cup holder in the folding bench seat
(Wagon)
X
To open: press the front of cup holder :.
Cup holder : is released.
X
Pull cup holder : out to the stop.
Bottle holder
G
WARNING
If objects in the passenger compartment are
stowed incorrectly, they can slide or be
thrown around and hit vehicle occupants.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
R
Always stow objects so that they cannot be
thrown around in such situations.
R
Always make sure that objects do not pro-
trude from stowage spaces, parcel nets or
stowage nets.
R
Close the lockable stowage spaces while
driving.
R
Always stow and secure heavy, hard, poin-
ted, sharp-edged, fragile or bulky objects in
the trunk/cargo compartment.
Observe the loading guidelines (Y page 292).
!
Make sure that any bottles weighing more
than 1.1 lb(0.5 kg) that are stored in the
bottle holder, rest on the vehicle floor. The
bottle holder could otherwise be damaged.
310
Features
Stowage and features
X
Press the outer edge of button : and slide
in the direction of the arrow until the bottle
fits into the opening.
X
Insert the bottle into the bottle holder.
The bottle holder is suitable for bottles with a
capacity of 25 fl. oz. (0.7 l) to 54 fl. oz. (1.5 l).
The bottle holder does not secure the bottles;
it merely prevents them from tipping over.
Sun visors
Overview
G
WARNING
If the mirror cover of the vanity mirror is folded
up when the vehicle is in motion, you could be
blinded by incident light. There is a risk of an
accident.
Always keep the mirror cover folded down
while driving.
:
Mirror light
;
Additional sun visor
=
Bracket
?
Retaining clip, e.g. for a car park ticket
A
Vanity mirror
B
Mirror cover
Vanity mirror in the sun visor
Mirror light : only functions if the sun visor
is clipped into retainer = and mirror cover B
has been folded up.
Glare from the side
X
Fold down sun visor :.
X
Pull sun visor : out of retainer =.
X
Swing sun visor : to the side.
X
Vehicles with an additional sun visor:
slide sun visor : horizontally as desired.
X
Fold down additional sun visor ; to the
windshield.
Roller sunblinds on the rear side win-
dows
!
Always guide the roller sunblind by hand.
Do not let it snap back suddenly as this
would damage the automatic roller mech-
anism.
!
Do not drive the vehicle with the roller
sunblind hooked in and the side windows
opened simultaneously. The roller sunblind
can jump out of the retainers and spring
back suddenly when driving at high speeds,
e.g. when driving on the freeway. This could
damage the inertia reel. Therefore, either
Features
311
Stowage and features
Z
close the side window or retract the roller
sunblind before driving at high speeds.
X
To extend: pull the roller sunblind out by
tab : and hook it onto retainers ; at the
top of the window.
Rear window roller sunblind (Sedan)
Important safety notes
G
WARNING
When extending or retracting, parts of the
body could become trapped within the sweep
of the roller sunblind. There is a risk of injury.
When extending or retracting, make sure that
no one has any parts of the body within the
sweep of the roller sunblind. If someone
becomes trapped, briefly press the button
again. The opening or closing procedure will
be stopped.
!
Make sure that the roller sunblind can
move freely. Otherwise, the roller sunblind
or other objects could be damaged.
Extending/retracting from the driver's
seat
X
Turn the SmartKey to position 1 or 2 in the
ignition lock (Y page 157).
X
To extend or retract: briefly press but-
ton :.
The roller sunblind fully extends or fully
retracts.
X
To stop: briefly press button : again.
The roller sunblind stops briefly and moves
back into the out-of-use position.
Ashtray
Front ashtray
!
The stowage space under the ashtray is
not heat resistant. Before placing lit ciga-
rettes in the ashtray, make sure that the
ashtray is properly engaged. Otherwise, the
stowage space could be damaged.
312
Features
Stowage and features
X
To open: slide cover : forwards until it
engages.
X
To remove the insert: grasp insert = by
the notch at the side and lift it up ; and
out.
X
To re-install the insert: press insert =
into the holder until it engages.
X
To close: briefly press cover : at the
front.
The cover moves back.
You can remove the ashtray insert and use
the resulting compartment for stowage.
Rear-compartment ashtray
X
To open: briefly press cover ; at the top.
The ashtray opens.
X
To remove the insert: press release but-
ton = and lift the insert up and out.
X
To install the insert: install insert : from
above into the holder and press down into
the holder until it engages.
Cigarette lighter
Important safety notes
G
WARNING
You can burn yourself if you touch the hot
heating element or the socket of the cigarette
lighter.
In addition, flammable materials can ignite if:
R
the hot cigarette lighter falls
R
a child holds the hot cigarette lighter to
objects, for example
There is a risk of fire and injury.
Always hold the cigarette lighter by the knob.
Always make sure that the cigarette lighter is
out of reach of children. Never leave children
unsupervised in the vehicle.
Your attention must always be focused on the
traffic conditions. Only use the cigarette
lighter when road and traffic conditions per-
mit.
Cigarette lighter in the front compart-
ment
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
To open: slide cover : forwards until it
engages.
X
Press in cigarette lighter ;.
Cigarette lighter ; will pop out automati-
cally when the heating element is red-hot.
X
To close: briefly press cover : at the
front.
The cover moves back.
Features
313
Stowage and features
Z
12 V sockets
General notes
X
Turn the SmartKey to position 1 in the igni-
tion lock (Y page 157).
The sockets can be used for accessories with
a maximum draw of 180 W (15 A). Accesso-
ries include such items as lamps or chargers
for mobile phones.
If you use the sockets for long periods when
the engine is switched off, the battery may
discharge.
An emergency cut-out ensures that the on-
board voltage does not drop too low. If the on-
board voltage is too low, the power to the
sockets is automatically cut. This ensures
that there is sufficient power to start the
engine.
Socket in the front-compartment center
console
X
To open: slide cover : forwards until it
engages.
X
Lift up the cover of socket ;.
X
To close: briefly press cover : at the
front.
The cover moves back.
Socket in the rear-compartment center
console
X
Briefly press cover ; at the top.
The cover opens.
X
Lift up the cover of socket :.
Socket in the trunk/cargo compart-
ment
Power socket in the trunk (Sedan)
Power socket in the cargo compartment (Wagon)
X
Lift up the cover of socket :.
314
Features
Stowage and features
115 V socket
Important safety notes
G
DANGER
When a suitable device is connected, the
115 V power socket will be carrying a high
voltage. You could receive an electric shock if
the connector cable or the 115 V power
socket is pulled out of the trim or is damaged
or wet. There is a risk of fatal injury.
R
Use only connector cables that are dry and
free of damage.
R
When the ignition is off, make sure that the
115 V power socket is dry.
R
Have the 115 V power socket checked or
replaced immediately at a qualified speci-
alized workshop if it is damaged or has been
pulled out of the trim.
R
Never plug the connector cable into a 115 V
power socket that is damaged or has been
pulled out of the trim.
G
DANGER
If you reach into the power socket or plug
inappropriate devices into the power socket,
you could receive an electric shock. There is a
risk of fatal injury.
Only connect appropriate devices to the
power socket.
!
Note that work and repairs on the 115 V
power socket should only be carried out by
qualified specialist personnel.
General notes
The 115 V power socket provides an alter-
nating voltage of 115 V so that small elec-
tronic devices can be connected. These devi-
ces, such as games consoles, chargers and
laptops, should not consume more than a
maximum of 150 watts altogether.
Requirements for operation of these devices:
R
the electronic device that you connect has
a suitable connector and conforms to
standards specific to the country you are in.
R
the plug of the electronic device is plugged
correctly into 115 V power socket.
R
the maximum wattage of the device to be
connected must not exceed 150 watts.
R
the on-board power supply is within a per-
missible voltage range.
R
the 12 V sockets in the rear and the cargo
compartment/trunk are operational
(Y page 314).
Using the 115 V power socket
X
Open flap =.
X
Switch on the ignition.
X
Insert the plug of the electronic device into
115 V power socket :.
Indicator lamp ; lights up.
X
To turn off: disconnect the plug from 115 V
power socket :.
Ensure that you do not pull on the cord.
Features
315
Stowage and features
Z
Problems with the 115 V power socket
Problem
Possible causes/consequences and MM Solutions
The warning lamp on
the 115 V power socket
is not lit.
The on-board voltage is too low because the battery is too weak.
X
Start the engine.
or
X
Charge the battery (Y page 352).
If the indicator lamp still does not light up:
X
Visit a qualified specialist workshop.
The temperature of the DC/AC converter is temporarily too high.
X
Remove the electronic device connector from the 115 V socket.
X
Let the DC/AC converter cool down.
If the indicator lamp still does not light up after cooling down the
converter:
X
Visit a qualified specialist workshop.
You have connected an electronic device that has a constant
nominal power of less than 150 watts, but a very high switch-on
current. This device will not work. If you connect such a device, the
115 V power socket will not supply it with power.
X
Connect a suitable electronic device.
mbrace
General notes
You must have a license agreement to acti-
vate the mbrace service. Make sure that your
system is activated and operational. To log in,
press the ï MB Info call button. If any of
the steps mentioned are not carried out, the
system may not be activated.
If you have questions about the activation,
contact one of the following telephone hot-
lines:
R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
Shortly after successfully registering with the
service, a user ID and password will be sent to
you by post.
USA only: you can use this password to log
onto the mbrace area under "Owners Online"
at http://www.mbusa.com.
The system is available if:
R
it has been activated and is operational
R
the corresponding mobile phone network is
available for transmitting data to the Cus-
tomer Center
R
a service subscription is available
R
the starter battery is sufficiently charged
i Determining the location of the vehicle on
a map is only possible if:
R
GPS reception is available.
R
the vehicle position can be forwarded to
the Customer Assistance Center.
316
Features
Stowage and features
The mbrace system
To adjust the volume during a call, proceed as
follows:
X
Press the W or X button on the mul-
tifunction steering wheel.
or
X
Use the volume controller of the audio sys-
tem/COMAND.
The system offers various services, e.g.:
R
Automatic and manual emergency call
R
Roadside Assistance call
R
MB Info call
USA only: you can find information and a
description of all available features under
"Owners Online" at http://www.mbusa.com.
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
A malfunction in the system has been detec-
ted if one of the following occurs:
R
The indicator lamp in the SOS button does
not come on during the system self-test.
R
The indicator lamp in the F Roadside
Assistance button does not light up during
self-diagnosis of the system.
R
The indicator lamp in the ï MB Info call
button does not light up during self-diag-
nosis of the system.
R
The indicator lamp in one or more of the
following buttons continues to light up red
after the system self-diagnosis:
-
SOS button
-
F Roadside Assistance call button
-
ï MB Info call button
R
After the system self-diagnosis, the Inop‐Inop‐
erativeerative or Service Not ActivatedService Not Activated
message appears in the multifunction dis-
play.
If a malfunction is indicated as outlined
above, the system may not operate as expec-
ted. In the event of an emergency, help will
have to be summoned by other means.
Have the system checked at the nearest
authorized Mercedes-Benz Center or contact
the following service hotlines:
R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
Emergency call
Important safety notes
G
WARNING
It can be dangerous to remain in the vehicle,
even if you have pressed the SOS button in an
emergency if:
R
you see smoke inside or outside of the vehi-
cle, e.g. if there is a fire after an accident
R
the vehicle is on a dangerous section of
road
R
the vehicle is not visible or cannot easily be
seen by other road users, particularly when
dark or in poor visibility conditions
There is a risk of an accident and injury.
Leave the vehicle immediately in this or simi-
lar situations as soon as it is safe to do so.
Move to a safe location along with other vehi-
cle occupants. In such situations, secure the
vehicle in accordance with national regula-
tions, e. g. with a warning triangle.
You must have a license agreement to acti-
vate the mbrace service. Make sure that your
system is activated and operational. To reg-
ister, press the ï MB Info call button. If
any of the steps mentioned are not carried
out, the system may not be activated.
If you have questions about the activation,
contact one of the following telephone hot-
lines:
R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
Features
317
Stowage and features
Z
General notes
An emergency call is dialed automatically if an
air bag or Emergency Tensioning Device is
triggered.
i
You cannot end an automatically trig-
gered emergency call yourself.
An emergency call can also be initiated man-
ually.
As soon as the emergency call has been ini-
tiated, the indicator lamp in the SOS button
flashes. The multifunction display shows the
Connecting CallConnecting Call message.
The audio output is muted.
Once the connection has been made, the
Call ConnectedCall Connected message appears in the
multifunction display.
All important information on the emergency is
transmitted, for example:
R
current location of the vehicle (as deter-
mined by the GPS system)
R
vehicle identification number
R
information on the severity of the accident
Shortly after the emergency call has been ini-
tiated, a voice connection is automatically
established between the Customer Assis-
tance Center and the vehicle occupants.
R
If the vehicle occupants respond, the
Mercedes-Benz Customer Assistance Cen-
ter attempts to get more information on the
emergency.
R
If there is no response from the vehicle
occupants, an ambulance is immediately
sent to the vehicle.
If no voice connection can be established to
the Mercedes-Benz Customer Assistance
Center, the system has been unable to initiate
an emergency call.
This can occur, for example, if the relevant
mobile phone network is not available. The
indicator lamp in the SOS button flashes con-
tinuously.
The Call FailedCall Failed message appears in the
multifunction display and must be confirmed.
In this case, summon assistance by other
means.
Making an emergency call
X
To initiate an emergency call manually:
press cover : briefly to open.
X
Press SOS button ; briefly.
The indicator lamp in SOS button ;
flashes until the emergency call is conclu-
ded.
X
Wait for a voice connection to the
Mercedes-Benz Customer Assistance Cen-
ter.
X
After the emergency call, close cover :.
i
If the mobile phone network is unavaila-
ble, mbrace will not be able to make the
emergency call. If you leave the vehicle
immediately after pressing the SOS button,
you will not know whether mbrace placed
the emergency call. In this case, always
summon assistance by other means.
Roadside Assistance button
318
Features
Stowage and features
X
Press Roadside Assistance button :.
This initiates a call to the Mercedes-Benz
Customer Assistance Center.
The indicator lamp in Roadside Assistance
button : flashes while the call is active.
The multifunction display shows the Con‐Con‐
necting Callnecting Call message. The audio output
is muted.
If a connection can be made, the Call Con‐Call Con‐
nectednected message appears in the multifunction
display.
If a mobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
R
current location of the vehicle
R
vehicle identification number
i
The COMAND display indicates that a call
is active. During the call, you can change to
the navigation menu by pressing the NAVI
button on COMAND, for example.
Voice output is not available.
A voice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants.
From the vehicle remote malfunction diagno-
sis, the Mercedes-Benz Customer Assistance
Center can ascertain the nature of the prob-
lem (Y page 323).
The Mercedes-Benz Customer Assistance
Center either sends a qualified Mercedes-
Benz technician or makes arrangements for
your vehicle to be transported to the nearest
authorized Mercedes-Benz Center.
You may be charged for services such as
repair work and/or towing.
Further details are available in your mbrace
manual.
i The system has not been able to initiate a
Roadside Assistance call, if:
R
the indicator lamp for Roadside Assis-
tance call button : is flashing continu-
ously.
R
no voice connection to the Mercedes-
Benz Customer Assistance Center was
established.
This can occur if the relevant mobile phone
network is not available, for example.
The Call FailedCall Failed message appears in the
multifunction display.
X
To end a call: press the ~ button on the
multifunction steering wheel.
or
X
Press the corresponding button for ending
a phone call on COMAND.
MB Info call button
X
Press MB Info call button :.
This initiates a call to the Mercedes-Benz
Customer Assistance Center.
The indicator lamp in MB Info call button :
flashes while the connection is being made.
The multifunction display shows the Con‐Con‐
nectingnecting CallCall message. The audio system
is muted.
If a connection can be made, the Call Con‐Call Con‐
nectednected message appears in the multifunction
display.
Features
319
Stowage and features
Z
If a mobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
R
current location of the vehicle
R
vehicle identification number
i
The COMAND display indicates that a call
is active. During the call, you can change to
the navigation menu by pressing the NAVI
button on COMAND, for example.
Voice output is not available.
A voice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest authorized
Mercedes-Benz Center and about other prod-
ucts and services from Mercedes-Benz.
USA only: you can find further information on
the mbrace system under "Owners Online" at
http://www.mbusa.com.
i The system has not been able to initiate
an MB Info call, if:
R
the indicator lamp in MB Info call but-
ton : is flashing continuously.
R
no voice connection to the Mercedes-
Benz Customer Assistance Center was
established.
This can occur if the relevant mobile phone
network is not available, for example.
The Call FailedCall Failed message appears in the
multifunction display.
X
To end a call: press the ~ button on the
multifunction steering wheel.
or
X
Press the corresponding button for ending
a phone call on COMAND.
Call priority
When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an emer-
gency call will take priority and override all
other active calls.
The indicator lamp of the respective button
flashes until the call is ended.
An emergency call can only be terminated by
the Mercedes-Benz Customer Assistance
Center.
All other calls can be ended by pressing:
R
the ~ button on the multifunction steer-
ing wheel
R
or the corresponding COMAND button for
ending a telephone call
i
When a call is initiated, the audio system
is muted. The mobile phone is no longer
connected to COMAND. However, if you
want to use your mobile phone, do so only
when the vehicle is stationary and in a safe
location.
Downloading destinations in COMAND
Downloading destinations
Downloading destinations gives you access
to a database with over 15 million points of
interest (POIs). These can be downloaded on
the navigation system in your vehicle. If you
know the destination, the address can be
downloaded. Alternatively, you can obtain the
location of Points of Interest (POIs)/impor-
tant destinations in the vicinity.
Furthermore, you can download routes with
up to 20 way points.
You are prompted to confirm route guidance
to the address entered.
The system calculates the route and subse-
quently starts the route guidance with the
address entered.
i
If you select NoNo, the address can be saved
in the address book.
i
The destination download function is
available if the relevant mobile phone net-
work is available and data transfer is pos-
sible.
320
Features
Stowage and features
i
The destination download function can
only be used if the vehicle is equipped with
a navigation system.
Route Assistance
This service is part of the mbrace PLUS Pack-
age and cannot be purchased separately.
i
You can also use the Route Assistance
function if your vehicle is not equipped with
a navigation system.
Within the framework of this service, you
receive a professional and reliable form of
navigation support without having to leave
your vehicle.
The customer service representative finds a
suitable route depending on your vehicle's
current position and the desired destination.
You will then be guided live through the cur-
rent route section.
Search & Send
General notes
i
To use "Search & Send", your vehicle
must be equipped with mbrace and a navi-
gation system. Additionally, an mbrace ser-
vice subscription must be completed.
"Search & Send" is a destination entry ser-
vice. A destination address which is found on
Google Maps
®
can be transferred via mbrace
directly to your vehicle's navigation system.
Specifying and sending the destination
address
X
Go to the website http://
www.maps.google.com and enter a desti-
nation address into the entry field.
X
To send the destination address to the
e-mail address of your mbrace account:
click on the corresponding button on the
website.
i
Example:
If you select 'Send to vehicle' and then
'Mercedes-Benz', the destination address
will be sent to your vehicle.
X
When the "Send" dialog window appears:
Enter the e-mail address you specified
when setting up your mbrace account into
the corresponding field.
X
Click "Send".
i
Information on specific commands such
as "Address entry" or "Send" can be found
on the website.
Calling up destination addresses
X
Switch on the ignition.
The destination address is loaded into the
vehicle's navigation system.
A display message appears, asking
whether navigation should be started.
X
Select YesYes by turning cVd or sliding XVY
the COMAND controller and press W to
confirm.
The system calculates the route and sub-
sequently starts the route guidance with
the address entered.
i
If you select NoNo, the address can be saved
in the address book.
i
If you have sent more than one destina-
tion address, each individual destination
must be confirmed separately.
i
Destination addresses are loaded in the
same order as the order in which they were
sent.
If you own multiple Mercedes-Benz vehi-
cles with mbrace and activated mbrace
accounts:
If multiple vehicles are registered under the
same e-mail address, the destination will
be sent to all the vehicles.
Vehicle remote opening
You can use the vehicle remote opening if you
have unintentionally locked your vehicle and
a replacement SmartKey is not available.
The vehicle can be opened by the Mercedes-
Benz Customer Assistance Center.
Features
321
Stowage and features
Z
The vehicle can be immediately opened
remotely within four days of the ignition being
turned off. After this time, the remote unlock-
ing may be delayed by 15 to 60 minutes. After
30 days, the vehicle can no longer be opened
remotely.
X
Contact the following service hotlines:
R
USA: Mercedes-Benz Customer Assis-
tance Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
You will be asked for your password.
X
Return to your vehicle at the time agreed
upon with the Mercedes-Benz Customer
Assistance Center.
USA only: alternatively, the vehicle can be
opened via:
R
the Internet, under the "Owners Online"
section
R
the telephone application (e.g. for iPhone
®
,
Android)
To do this, you will need your identification
number and password.
i
Vehicle remote opening is only possible if
the corresponding mobile phone network is
accessible.
Vehicle remote closing
The valet locking feature can be used when
you have forgotten to lock the vehicle and you
are no longer nearby.
The vehicle can then be locked by the
Mercedes-Benz Customer Assistance Center.
The vehicle can be immediately remotely
locked within four days of the ignition being
turned off. After this time, remote closing may
be delayed by 15 to 60 minutes. After 30 days
the vehicle can no longer be locked remotely.
X
Contact the following service hotlines:
R
USA: Mercedes-Benz Customer Assis-
tance Center at 1-800-FOR-MERCedes
(1-800-367-6372) or 1-866-990-9007
R
Canada: Customer Service at
1-888-923-8367
You will be asked for your password.
The next time you are inside the vehicle and
you switch on the ignition, the DoorsDoors
Locked RemotelyLocked Remotely message appears in the
multifunction display.
USA only: alternatively, the vehicle can be
locked via:
R
the Internet, under the "Owners Online"
section
R
the telephone application (e.g. for iPhone
®
,
Android)
To do this, you will need your identification
number and password.
i
The vehicle remote closing feature is
available when the relevant mobile phone
network is available and data connection is
possible.
Stolen vehicle recovery service
If your vehicle has been stolen:
X
Notify the police.
The police will issue a numbered incident
report.
X
This number will be forwarded to the
Mercedes-Benz Customer Assistance Cen-
ter together with your PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance Cen-
ter contacts you and the local law enforce-
ment agency if the vehicle is located.
However, only the law enforcement agency
is informed of the location of the vehicle.
i
If the anti-theft alarm system is activated
for longer than 30 seconds, the Mercedes-
Benz Customer Assistance Center is auto-
matically notified.
322
Features
Stowage and features
Vehicle remote malfunction diagnosis
With the vehicle remote malfunction diagno-
sis (Vehicle Health Check), the Customer
Assistance center can provide improved sup-
port for problems with your vehicle. During an
existing call, vehicle data is transferred to the
Customer Assistance Center. The customer
service representative can use the received
data to decide what kind of assistance is
required. You are then, for example, guided to
the nearest authorized Mercedes-Benz Cen-
ter or a recovery vehicle is called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
Center. You will see the Roadside Assis‐Roadside Assis‐
tance Connectedtance Connected message in the COMAND
display. If the vehicle remote malfunction
diagnosis can be started, the Request forRequest for
vehicle diagnosis received. Startvehicle diagnosis received. Start
vehicle diagnosis?vehicle diagnosis? message appears in
the display.
X
Confirm the message with YesYes.
X
When the Vehicle Diagnosis PleaseVehicle Diagnosis Please
start ignitionstart ignition message appears, turn
the SmartKey to position 2 in the ignition
lock (Y page 157).
X
When the PleasePlease followfollow thethe instruc‐instruc‐
tions received by phone and movetions received by phone and move
your vehicle to a safe position.your vehicle to a safe position.
message appears, follow the customer ser-
vice representative's instructions.
The message in the display disappears.
If you select CancelCancel, the vehicle remote
malfunction diagnosis is canceled com-
pletely.
The vehicle operating state check begins.
You will see the Vehicle diagnosisVehicle diagnosis
activated.activated. message.
When the diagnosis is completed, the SendSend
vehicle diagnostics data//(Voicevehicle diagnostics data//(Voice
connection may be//interrupted dur‐connection may be//interrupted dur‐
inging datadata transfer)transfer) message appears. The
vehicle data can now be sent to the Customer
Assistance center.
X
Press OKOK to confirm the message.
The voice connection with the Customer
Assistance Center is terminated.
You will see the Vehicle Diagnosis:Vehicle Diagnosis:
Transferring data...Transferring data... message.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice con-
nection is re-established after the transfer is
complete. If necessary, you will be contacted
at a later time by another means, e.g. by e-
mail or phone.
Another function of the vehicle remote mal-
function diagnosis is the transfer of service
data to the Customer Assistance Center. If a
service is overdue, the COMAND display
shows a message about various special offers
at your workshop.
USA only: this information can also be called
up under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
(Y page 29).
Information on Roadside Assistance
(Y page 25).
Downloading routes
Downloading routes allows you to transfer
and save predefined routes in the navigation
system. To do this, an SD memory card must
be inserted into the COMAND system. If no
SD memory card is inserted, you must insert
the card into the card slot on the COMAND
system before saving.
A route can be prepared and sent either by a
customer service representative or via the
mbrace portal on the Internet.
Each route can include up to 20 way points.
Once a route has been received by the navi-
gation system, you will see the <route<route
name>name> hashas beenbeen savedsaved toto memorymemory card.card.
DoDo youyou wantwant toto startstart routeroute guidance?guidance?
message in the COMAND display. The route is
saved to the SD memory card.
Features
323
Stowage and features
Z
X
To start route guidance: select YesYes.
An overview of the route is shown in the
display.
i
If you select NoNo, the saved route can be
called up later via the navigation menu.
X
Select StartStart.
Route guidance is started.
i
Downloaded and saved data can be called
up again in COMAND.
You can find further information in the sep-
arate COMAND Operating Instructions.
Speed alert
You can define the upper speed limit, which
must not be exceeded by the vehicle.
If this selected speed is exceeded by the vehi-
cle, a message will be sent to the Customer
Assistance Center. The Customer Assistance
Center then forwards this information to you.
You can select the way in which you receive
this information beforehand. Possible options
include text message, e-mail or an automated
call.
The data you receive contains the following
information:
R
the location where the speed limit was
exceeded
R
the time at which the speed limit was
exceeded
R
the selected speed limit which was excee-
ded
Geo fencing
Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the boun-
daries of the selected areas. You can select
the way in which you receive this information
beforehand. Possible options include text
message, e-mail or an automated call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas simultane-
ously. Different settings are possible for each
area.
USA only: these settings can be called up
under "Owners Online" at http://
www.mbusa.com.
Alternatively, you can trigger an MB Info call
and inform the customer service representa-
tive that you wish to activate geo fencing.
Currently inactive areas can be activated by
text message.
Triggering the vehicle alarm
With this function, you can trigger the vehi-
cle's panic alarm via text message. An alarm
sounds and the exterior lighting flashes.
Depending on the setting, the panic alarm
lasts five or ten seconds. Afterwards, the
alarm switches off.
Garage door opener
General notes
The HomeLink
®
garage door opener integra-
ted in the rear-view mirror allows you to oper-
ate up to three different door and gate sys-
tems.
Use the integrated garage door opener only
on garage doors that:
R
have safety stop and reverse features and
R
meet current U.S. federal safety standards
Once programed, the integrated garage door
opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating
instructions for the garage door system.
When programing a garage door opener, park
the vehicle outside the garage. Do not run the
engine while programing.
Certain garage door drives are incompatible
with the integrated garage door opener. If you
have difficulty programing the integrated
garage door opener, contact an authorized
Mercedes-Benz Center.
324
Features
Stowage and features
Alternatively, you can call the following tele-
phone assistance services:
R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
R
Canada: Customer Service at
1-800-387-0100
R
HomeLink
®
hotline 1-800-355-3515 (free
of charge)
More information on HomeLink
®
and/or
compatible products is also available online
at http://www.homelink.com.
Notes on the declaration of conformity
(Y page 27).
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
Important safety notes
G
WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming
Programming buttons
Pay attention to the "Important safety notes"
(Y page 325).
Garage door remote control A is not inclu-
ded with the integrated garage door opener.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Select one of buttons ; to ? to use to
control the garage door drive.
X
To start programming mode: press and
hold one of buttons ; to ? on the inte-
grated garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp : lights up yellow.
Indicator lamp : lights up yellow as soon
as button ;, = or ? is programmed for
the first time. If the selected button has
already been programmed, indicator
lamp : will only light up yellow after ten
seconds have elapsed.
X
Release button ;, = or ?. Indicator
lamp : flashes yellow.
X
To program the remote control: point
garage door remote control A towards
buttons ; to ? on the rear-view mirror at
a distance of 2 to 8 inches (5 to 20 cm).
X
Press and hold button B on remote control
A until indicator lamp : lights up green.
When indicator lamp : lights up green:
programming is finished.
When indicator lamp : flashes green: pro-
gramming was successful. The next step is
to synchronize the rolling code.
X
Release button B on remote control A for
the garage door drive system.
If indicator lamp : lights up red: repeat the
programing procedure for the correspond-
Features
325
Stowage and features
Z
ing button on the rear-view mirror. When
doing so, vary the distance between remote
control A and the rear-view mirror.
The required distance between remote
control A and the integrated garage door
opener depends on the garage door drive
system. Several attempts might be neces-
sary. You should test every position for at
least 25 seconds before trying another
position.
Synchronizing the rolling code
Pay attention to the "Important safety notes"
(Y page 325).
If the garage door system uses a rolling code,
you will also have to synchronize the garage
door system with the integrated garage door
opener in the rear-view mirror. To do this you
will need to use the programming button on
the door drive control panel. The program-
ming button may be positioned at different
locations depending on the manufacturer. It
is usually located on the door drive unit on the
garage ceiling.
Familiarize yourself with the garage door
drive operating instructions, e.g. under "Pro-
gramming of additional remote controls",
before carrying out the following steps.
Your vehicle must be within reach of the
garage door or gate opener drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Get out of the vehicle.
X
Press the programming button on the door
drive unit.
Usually, you now have 30 seconds to ini-
tiate the next step.
X
Get into the vehicle.
X
Press previously programmed button ;,
= or ? on the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete.
Notes on programming the remote con-
trol
Canadian radio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds.
Therefore, these signals may not last long
enough for the integrated garage door
opener. The signal is not recognized during
programming. Comparable with Canadian
law, some U.S. garage door openers also fea-
ture a "break".
Proceed as follows:
R
if you live in Canada
R
if you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps.
X
Press and hold one of buttons ; to ? on
the integrated garage door opener.
After a short time, indicator lamp : lights
up yellow.
X
Release the button.
Indicator lamp : flashes yellow.
X
Press button B of garage door remote
control A for two seconds, then release it
for two seconds.
X
Press button B again for two seconds.
X
Repeat this sequence on button B of
remote control A until indicator lamp :
lights up green.
When indicator lamp : lights up green:
programming is finished.
When indicator lamp : flashes green: pro-
gramming was successful. The next step is
to synchronize the rolling code.
X
Release button B of remote control A of
the garage door drive.
If indicator lamp : lights up red: repeat the
programming process for the correspond-
ing button on the rear-view mirror. When
doing so, vary the distance between remote
control A and the rear-view mirror.
The required distance between remote
control A and the integrated garage door
opener depends on the garage door drive
326
Features
Stowage and features
system. Several attempts might be neces-
sary. You should test every position for at
least 25 seconds before trying another
position.
Problems when programming
If you are experiencing problems programing
the integrated garage door opener on the
rear-view mirror, take note of the following
instructions:
R
Check the transmitter frequency used by
garage door drive remote control A and
whether it is supported. The transmitter
frequency can usually be found on the back
of the garage door drive remote control.
The integrated garage door opener is com-
patible with devices that have units which
operate in the frequency range of 280 to
433 MHz.
R
Replace the batteries in garage door
remote control A. This increases the like-
lihood that garage door remote control A
will transmit a strong and precise signal to
the integrated garage door opener.
R
When programming, hold remote control
A at varying distances and angles from the
button which you are programming. Try var-
ious angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
R
If another remote control is available for the
same garage door drive, repeat the same
programming steps with this remote con-
trol. Before performing these steps, make
sure that new batteries have been installed
in garage door drive remote control A.
R
Note that some remote controls only trans-
mit for a limited amount of time (the indi-
cator lamp on the remote control goes out).
Press button B on remote control A again
before transmission ends.
R
Align the antenna cable of the garage door
opener unit. This can improve signal recep-
tion/transmission.
Opening/closing the garage door
After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Press button ;, = or ? which you have
programmed to operate the garage door.
Garage door system with a fixed code: indi-
cator lamp : lights up green.
Garage door system with a rolling code:
indicator lamp : flashes green.
The transmitter will transmit a signal as long
as the button is pressed. The transmission is
halted after a maximum of ten seconds and
indicator lamp : lights up yellow. Press but-
ton ;, = or ? again if necessary.
Clearing the memory
Make sure that you clear the memory of the
integrated garage door opener before selling
the vehicle.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
X
Press and hold buttons ; and ?.
The indicator lamp initially lights up yellow
and then green.
X
Release buttons ; and ?.
The memory of the integrated garage door
opener in the rear-view mirror is cleared.
Floormats
G
WARNING
Objects in the driver's footwell can restrict the
pedal travel or obstruct a depressed pedal.
The operating and road safety of the vehicle is
jeopardized. There is a risk of an accident.
Make sure that all objects in the vehicle are
stowed correctly, and that they cannot enter
the driver's footwell. Install the floormats
Features
327
Stowage and features
Z
securely and as specified in order to ensure
sufficient clearance for the pedals. Do not use
loose floormats and do not place floormats on
top of one another.
X
Slide the seat backwards.
X
To install: place the floormat in the foot-
well.
X
Press studs : onto retainers ;.
X
To remove: pull the floormat off retain-
ers ;.
X
Remove the floormat.
328
Features
Stowage and features
Useful information ............................ 330
Engine compartment ........................ 330
Maintenance ...................................... 334
Care .................................................... 335
329
Maintenance and care
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Engine compartment
Hood
Important safety notes
G
WARNING
If the hood is unlatched, it may open up when
the vehicle is in motion and block your view.
There is a risk of an accident.
Never unlatch the hood while driving.
G
WARNING
When opening and closing the hood, it may
suddenly fall into the closed position. There is
a risk of injury to persons within range of
movement of the hood.
Open and close the hood only when no one is
within its range of movement.
G
WARNING
Opening the hood when the engine is over-
heated or when there is a fire in the engine
compartment could expose you to hot gases
or other service products. There is a risk of
injury.
Let an overheated engine cool down before
opening the hood. If there is a fire in the
engine compartment, keep the hood closed
and contact the fire department.
G
WARNING
The engine compartment contains moving
components. Certain components, such as
the radiator fan, may continue to run or start
again suddenly when the ignition is off. There
is a risk of injury.
If you need to do any work inside the engine
compartment:
R
switch off the ignition
R
never reach into the area where there is a
risk of danger from moving components,
such as the fan rotation area
R
remove jewelry and watches
R
keep items of clothing and hair, for exam-
ple, away from moving parts
G
WARNING
The ignition system and the fuel injection sys-
tem work under high voltage. If you touch
components which are under voltage, you
could get an electric shock. There is a risk of
injury.
Never touch components of the ignition sys-
tem or fuel injection system when the ignition
is switched on.
G
WARNING
Hybrid vehicles: be sure to read the "HYBRID"
supplement. Otherwise, you could fail to rec-
ognize dangers.
Opening the hood
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
330
Engine compartment
Maintenance and care
G
WARNING
When the hood is open and the windshield
wipers are set in motion, you can be injured by
the wiper linkage. There is a risk of injury.
Always switch off the windshield wipers and
the ignition before opening the hood.
!
Make sure that the windshield wipers are
not folded away from the windshield. You
could otherwise damage the windshield
wipers or the hood.
X
Make sure that the windshield wipers are
turned off.
X
Pull release lever : on the hood.
The hood is released.
X
Reach into the gap, pull hood catch han-
dle ; up and lift the hood.
If you lift the hood by approximately 15 in
(40 cm), the hood is opened and held open
automatically by the gas-filled strut.
Closing the hood
X
Lower the hood and let it fall from a height
of approximately 8 in (20 cm).
X
Check that the hood has engaged properly.
If the hood can be raised slightly, it is not
properly engaged. Open it again and close
it with a little more force.
Radiator
Vehicles with a diesel engine: do not cover
the radiator, for example with a winter front or
bug cover. The readings of the on-board-diag-
nostic system may otherwise be inaccurate.
Some of these readings are required by law
and must be accurate at all times.
Engine oil
General notes
G
WARNING
Hybrid vehicles: be sure to read the "HYBRID"
supplement. Otherwise, you could fail to rec-
ognize dangers.
Depending on your driving style, the vehicle
consumes up to 0.9 US qt (0.8 liters) of oil per
600 miles (1,000 km). The oil consumption
may be higher than this when the vehicle is
new or if you frequently drive at high engine
speeds.
Depending on the engine, the oil dipstick may
be in a different location.
When checking the oil level:
R
park the vehicle on a level surface.
R
the engine should be switched off for
approximately five minutes if the engine is
at normal operating temperature.
R
if the engine is not at normal operating
temperature, e.g. if the engine was only
started briefly, wait about 30 minutes
before carrying out the measurement.
Engine compartment
331
Maintenance and care
Z
Checking the oil level using the oil dip-
stick
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
Example: vehicles with a gasoline engine
Example: vehicles with a diesel engine
X
Pull oil dipstick : out of the dipstick guide
tube.
X
Wipe off oil dipstick :.
X
Slowly slide oil dipstick : into the guide
tube to the stop, and take it out again.
If the level is between MIN mark = and
MAX mark ;, the oil level is correct.
X
If the oil level has dropped to MIN mark =
or below, add 1.1 US qt (1.0 liter) engine oil.
Adding engine oil
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
G
WARNING
If engine oil comes into contact with hot com-
ponents in the engine compartment, it may
ignite. There is a risk of fire and injury.
Make sure that engine oil is not spilled next to
the filler neck. Let the engine cool down and
thoroughly clean the engine oil off the com-
ponents before starting the engine.
H
Environmental note
When adding oil, take care not to spill any. If
oil enters the soil or waterways, it is harmful to
the environment.
!
Only use engine oils and oil filters that
have been approved for vehicles with a ser-
vice system. You can obtain a list of the
engine oils and oil filters tested and
approved in accordance with the
Mercedes-Benz Specifications for Service
Products at any Mercedes-Benz Service
center.
Damage to the engine or exhaust system is
caused by the following:
R
using engine oils and oil filters that have
not been specifically approved for the
service system
R
replacing engine oil and oil filters after
the interval for replacement specified by
the service system has been exceeded
R
using engine oil additives.
!
Do not add too much oil. adding too much
engine oil can result in damage to the
332
Engine compartment
Maintenance and care
engine or to the catalytic converter. Have
excess engine oil siphoned off.
Example
X
Turn cap : counter-clockwise and remove
it.
X
Add engine oil.
If the oil level is at or below the MIN mark on
the oil dipstick, add 1.1 US qt (1.0 l) of
engine oil.
X
Replace cap : on the filler neck and turn
clockwise.
Ensure that the cap locks into place
securely.
X
Check the oil level again with the oil dip-
stick (Y page 332).
Further information on engine oil
(Y page 415).
Additional service products
Checking coolant level
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
G
WARNING
The engine cooling system is pressurized, par-
ticularly when the engine is warm. When
opening the cap, you could be scalded by hot
coolant spraying out. There is a risk of injury.
Let the engine cool down before opening the
cap. Wear eye and hand protection when
opening the cap. Open the cap slowly half a
turn to allow pressure to escape.
X
Park the vehicle on a level surface.
Only check the coolant level when the vehi-
cle is on a level surface and the engine has
cooled down.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
On vehicles with KEYLESS-GO, press the
Start/Stop button twice (Y page 158).
X
Check the coolant temperature display in
the instrument cluster.
The coolant temperature must be below
158 (70 †).
X
Turn the SmartKey to position 0 in the igni-
tion lock (Y page 157).
X
Slowly turn cap : half a turn counter-
clockwise to allow excess pressure to
escape.
X
Turn cap : further counter-clockwise and
remove it.
If the coolant is at the level of marker bar =
in the filler neck when cold, there is enough
coolant in coolant expansion tank ;.
If the coolant level is approximately 0.6 in
(1.5 cm) above marker bar = in the filler
Engine compartment
333
Maintenance and care
Z
neck when warm, there is enough coolant
in expansion tank ;.
X
If necessary, add coolant that has been tes-
ted and approved by Mercedes-Benz.
X
Replace cap : and turn it clockwise as far
as it will go.
For further information on coolant, see
(Y page 417).
Adding washer fluid to the windshield
washer system
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
G
WARNING
Windshield washer concentrate could ignite if
it comes into contact with hot engine compo-
nents or the exhaust system. There is a risk of
fire and injury.
Make sure that no windshield washer con-
centrate is spilled next to the filler neck.
X
To open: pull cap : upwards by the tab.
X
Add the premixed washer fluid.
X
To close: press cap : onto the filler neck
until it engages.
If the washer fluid level drops below the rec-
ommended minimum of 1 liter, a message
appears in the multifunction display prompt-
ing you to add washer fluid (Y page 278).
Further information on windshield washer
fluid/antifreeze (Y page 418).
Maintenance
ASSYST PLUS
Service messages
The ASSYST PLUS service interval display
informs you of the next service due date.
Information on the type of service and service
intervals (see the separate Maintenance
Booklet).
You can obtain further information from an
authorized Mercedes-Benz Center or at
http://www.mbusa.com (USA only).
i
The ASSYST PLUS service interval display
does not show any information on the
engine oil level. Observe the notes on the
engine oil level (Y page 331).
The multifunction display shows a service
message for several seconds, e.g.:
R
Service A in .. daysService A in .. days
R
Service A DueService A Due
R
Service A Exceeded by .. DaysService A Exceeded by .. Days
Depending on the operating conditions of the
vehicle, the remaining time or distance until
the next service due date is displayed.
The letter AA or BB, possibly in connection with a
number or another letter, indicates the type
of service. AA stands for a minor service and BB
for a major service.
You can obtain further information from an
authorized Mercedes-Benz Center.
The ASSYST PLUS service interval display
does not take into account any periods of
time during which the battery is disconnec-
ted.
334
Maintenance
Maintenance and care
Maintaining the time-dependent service
schedule:
X
Note down the service due date displayed
in the multifunction display before discon-
necting the battery.
or
X
After reconnecting the battery, subtract
the battery disconnection periods from the
service date shown on the display.
Hiding a service message
X
Press the a or % button on the steer-
ing wheel.
Displaying service messages
X
Switch on the ignition.
X
Press the = or ; button on the steer-
ing wheel to select the Serv.Serv. menu.
X
Press the 9 or : button to select the
ASSYST PLUSASSYST PLUS submenu and confirm by
pressing the a button.
The service due date appears in the multi-
function display.
Information about Service
Resetting the ASSYST PLUS service inter-
val display
!
If the ASSYST PLUS service interval dis-
play has been inadvertently reset, this set-
ting can be corrected at a qualified special-
ist workshop.
Have service work carried out as described
in the Maintenance Booklet. This may oth-
erwise lead to increased wear and damage
to the major assemblies or the vehicle.
A qualified specialist workshop, e.g. an
authorized Mercedes-Benz Center, will reset
the ASSYST PLUS service interval display
after the service work has been carried out.
You can also obtain further information on
maintenance work, for example.
Special service requirements
The specified maintenance interval takes only
the normal operation of the vehicle into
account. Under arduous operating conditions
or increased load on the vehicle, mainte-
nance work must be carried out more fre-
quently, for example:
R
regular city driving with frequent intermedi-
ate stops
R
if the vehicle is primarily used to travel
short distances
R
use in mountainous terrain or on poor road
surfaces
R
if the engine is often left idling for long peri-
ods
Under these or similar conditions, have, for
example, the air filter, engine oil and oil filter
replaced or changed more frequently. Under
arduous operating conditions, the tires must
be checked more often. Further information
can be obtained at a qualified specialist work-
shop, e.g. an authorized Mercedes-Benz Cen-
ter.
Driving abroad
An extensive Mercedes-Benz Service network
is also available in other countries. You can
obtain further information from any author-
ized Mercedes-Benz Center.
Care
General notes
H
Environmental note
Dispose of empty packaging and cleaning
cloths in an environmentally responsible man-
ner.
!
For cleaning your vehicle, do not use any
of the following:
R
dry, rough or hard cloths
R
abrasive cleaning agents
R
solvents
R
cleaning agents containing solvents
Care
335
Maintenance and care
Z
Do not scrub.
Do not touch the surfaces or protective
films with hard objects, e.g. a ring or ice
scraper. You could otherwise scratch or
damage the surfaces and protective film.
!
Do not park the vehicle for an extended
period straight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you
should drive for a few minutes after clean-
ing. Braking heats the brake discs and the
brake pads/linings, thus drying them. The
vehicle can then be parked.
Regular care of your vehicle is a condition for
retaining the quality in the long term.
Use care products and cleaning agents rec-
ommended and approved by Mercedes-Benz.
Washing the vehicle and cleaning the
paintwork
Automatic car wash
G
WARNING
Braking efficiency is reduced after washing
the vehicle. There is a risk of an accident.
After the vehicle has been washed, brake
carefully while paying attention to the traffic
conditions until full braking power is restored.
!
If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations. To prevent dam-
age to the vehicle, deactivate DISTRONIC
PLUS and the HOLD function in the follow-
ing or other similar situations:
R
when towing the vehicle
R
in the car wash
!
Never clean your vehicle in a Touchless
Automatic Car Wash as these use special
cleaning agents. These cleaning agents can
damage the paintwork or plastic parts.
!
Make sure that:
R
the side windows and the sliding sunroof
are fully closed.
R
the ventilation/heating is switched off
(the OFF button has been pressed).
R
the windshield wiper switch is in position
0.
Otherwise, the vehicle might be damaged.
!
In car washes with a towing mechanism,
make sure that the automatic transmission
is in transmission position N, otherwise the
vehicle could be damaged.
R
Vehicles with a SmartKey:
Do not remove the SmartKey from the
ignition lock. Do not open the driver's
door or front-passenger door when the
engine is switched off. Otherwise, the
automatic transmission selects park
position P automatically and locks the
wheels. You can prevent this by shifting
the automatic transmission to N before-
hand.
R
Vehicles with KEYLESS-GO:
Do not open the driver's door or front-
passenger door when the engine is
switched off. Otherwise, the automatic
transmission selects park position P
automatically and locks the wheels.
!
If the SmartKey is within the rear detec-
tion range of KEYLESS-GO, the following
situations, for example, could lead to the
unintentional opening of the trunk lid/tail-
gate:
R
using a car wash
R
using a power washer
Make sure that the SmartKey is at least
6.5 ft (2 m) away from the vehicle.
Observe the following to make sure that the
automatic transmission stays in position N:
336
Care
Maintenance and care
X
Make sure the vehicle is stationary and the
ignition is switched off.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 157).
Use the SmartKey instead of the Start/
Stop button on vehicles with KEYLESS-GO.
X
Depress and hold the brake pedal.
X
Shift the automatic transmission to posi-
tion N.
X
Release the brake pedal.
X
Release the parking brake.
X
Switch off the ignition and leave the Smart-
Key in the ignition lock.
You can wash the vehicle in an automatic car
wash from the very start.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off
wax from the windshield and the wiper
blades. This will prevent smears and reduce
wiping noises caused by residue on the wind-
shield.
Washing by hand
In some countries, washing by hand is only
allowed at specially equipped washing bays.
Observe the legal requirements in all coun-
tries concerned.
X
Do not use hot water and do not wash the
vehicle in direct sunlight.
X
Use a soft sponge to clean.
X
Use a mild cleaning agent, such as a car
shampoo approved by Mercedes-Benz.
X
Thoroughly hose down the vehicle with a
gentle jet of water.
X
Do not point the water jet directly towards
the air inlet.
X
Use plenty of water and rinse out the
sponge frequently.
X
Rinse the vehicle with clean water and dry
thoroughly with a chamois.
X
Do not let the cleaning agent dry on the
paintwork.
When using the vehicle in winter, remove all
traces of road salt deposits carefully and as
soon as possible.
Power washers
G
WARNING
The water jet from a circular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nents damaged in this way may fail unexpect-
edly. There is a risk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged
tires or chassis components replaced imme-
diately.
!
Always maintain a distance of at least
11.8 in (30 cm) between the vehicle and the
power washer nozzle. Information about
the correct distance is available from the
equipment manufacturer.
Move the power washer nozzle around
when cleaning your vehicle.
Do not aim directly at any of the following:
R
tires
R
door gaps, roof gaps, joints, etc.
R
electrical components
R
battery
R
connectors
R
lights
R
seals
R
trim
R
ventilation slots
Damaged seals or electrical components
can lead to leaks or failures.
!
If the SmartKey is within the rear detec-
tion range of KEYLESS-GO, the following
situations, for example, could lead to the
unintentional opening of the trunk lid/tail-
gate:
R
using a car wash
R
using a power washer
Care
337
Maintenance and care
Z
Make sure that the SmartKey is at least
6.5 ft (2 m) away from the vehicle.
Cleaning the paintwork
!
Do not affix:
R
stickers
R
films
R
magnetic plates or similar items
to painted surfaces. You could otherwise
damage the paintwork.
Scratches, corrosive deposits, areas affected
by corrosion and damage caused by inade-
quate care cannot always be completely
repaired. In such cases, visit a qualified spe-
cialist workshop.
X
Remove dirt immediately, where possible,
while avoiding rubbing too hard.
X
Soak insect remains with insect remover
and rinse off the treated areas afterwards.
X
Soak bird droppings with water and rinse
off the treated areas afterwards.
X
Remove coolant, brake fluid, tree resin,
oils, fuels and greases by rubbing gently
with a cloth soaked in petroleum ether or
lighter fluid.
X
Use tar remover to remove tar stains.
X
Use silicone remover to remove wax.
If water no longer forms "beads" on the paint
surface, use the paint care products recom-
mended and approved by Mercedes-Benz.
This is the case approximately every three to
five months, depending on the climate con-
ditions and the care product used.
If dirt has penetrated the paint surface or if
the paint has become dull, the paint cleaner
recommended and approved by Mercedes-
Benz should be used.
Do not use these care products in the sun or
on the hood while the hood is hot.
X
Use a suitable touch-up stick, e.g. MB
Touch-Up Stick, to repair slight damage to
the paintwork quickly and provisionally.
Matte finish care
!
Never polish the vehicle or the light alloy
wheels. Polishing causes the finish to
shine.
!
The following may cause the paint to
become shiny and thus reduce the matte
effect:
R
Vigorous rubbing with unsuitable mate-
rials.
R
Frequent use of car washes.
R
Washing the vehicle in direct sunlight.
!
Never use paint cleaner, buffing or pol-
ishing products, or gloss preserver, e.g.
wax. These products are only suitable for
high-gloss surfaces. Their use on vehicles
with matte finish leads to considerable sur-
face damage (shiny, spotted areas).
Always have paintwork repairs carried out
at a qualified specialist workshop.
!
Do not use wash programs with a hot wax
treatment under any circumstances.
Observe these notes if your vehicle has a
clear matte finish. This will help you to avoid
damage to the paintwork due to incorrect
treatment.
These notes also apply to light alloy wheels
with a clear matte finish.
i
The vehicle should preferably be washed
by hand using a soft sponge, car shampoo
and plenty of water.
i
Use only insect remover and car shampoo
from the range of recommended and
approved Mercedes-Benz care products.
Cleaning the vehicle parts
Cleaning the wheels
!
Do not use acidic wheel cleaning products
to remove brake dust. This could damage
wheel bolts and brake components.
338
Care
Maintenance and care
!
Do not park the vehicle for an extended
period straight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you
should drive for a few minutes after clean-
ing. Braking heats the brake discs and the
brake pads/linings, thus drying them. The
vehicle can then be parked.
Cleaning the windows
G
WARNING
You could become trapped by the windshield
wipers if they start moving while cleaning the
windshield or wiper blades. There is a risk of
injury.
Always switch off the windshield wipers and
the ignition before cleaning the windshield or
wiper blades.
!
Do not use dry cloths, abrasive products,
solvents or cleaning agents containing sol-
vents to clean the inside of the windows. Do
not touch the insides of the windows with
hard objects, e.g. an ice scraper or ring.
There is otherwise a risk of damaging the
windows.
!
Clean the water drainage channels of the
windshield and the rear window at regular
intervals. Deposits such as leaves, petals
and pollen may under certain circumstan-
ces prevent water from draining away. This
can lead to corrosion damage and damage
to electronic components.
X
Clean the inside and outside of the win-
dows with a damp cloth and a cleaning
product that is recommended and
approved by Mercedes-Benz.
Cleaning wiper blades
G
WARNING
You could become trapped by the windshield
wipers if they start moving while cleaning the
windshield or wiper blades. There is a risk of
injury.
Always switch off the windshield wipers and
the ignition before cleaning the windshield or
wiper blades.
!
Do not pull the wiper blade. Otherwise,
the wiper blade could be damaged.
!
Do not clean wiper blades too often and
do not rub them too hard. Otherwise, the
graphite coating could be damaged. This
could cause wiper noise.
!
Hold the wiper arm securely when folding
back. The windshield could be damaged if
the wiper arm smacks against it suddenly.
X
Fold the windshield wiper arms away from
the windshield.
X
Carefully clean the wiper blades with a
damp cloth.
X
Fold the windshield wiper arms back again
before switching on the ignition.
Cleaning the exterior lighting
!
Only use cleaning agents or cleaning
cloths which are suitable for plastic light
lenses. Unsuitable cleaning agents or
cleaning cloths could scratch or damage
the plastic light lenses.
X
Clean the plastic lenses of the exterior
lighting using a wet sponge and a mild
cleaning agent, e.g. Mercedes-Benz car
shampoo or cleaning cloths.
Mirror turn signals
!
Only use cleaning agents or cleaning
cloths that are suitable for plastic lenses.
Unsuitable cleaning agents or cleaning
cloths could scratch or damage the plastic
lenses of the mirror turn signals.
X
Clean the plastic lenses of the mirror turn
signals in the exterior mirror housing using
a wet sponge and mild cleaning agent, e.g.
Care
339
Maintenance and care
Z
Mercedes-Benz car shampoo or cleaning
cloths.
Cleaning the sensors
!
If you clean the sensors with a power
washer, make sure that you keep a dis-
tance of at least 11.8 in (30 cm) between
the vehicle and the power washer nozzle.
Information about the correct distance is
available from the equipment manufac-
turer.
X
Clean sensors : of the driving systems
with water, car shampoo and a soft cloth.
Cleaning the rear view camera
!
Do not clean the camera lens and the area
around the rear view camera with a power
washer.
X
Use clear water and a soft cloth to clean
camera lens :.
Cleaning the 360° camera
!
Do not clean the camera lens and the area
around the 360° camera with a power
washer.360
X
Use clear water and a soft cloth to clean
camera lens :.
Cleaning the exhaust pipes
G
WARNING
The exhaust tail pipe and tail pipe trim can
become very hot. If you come into contact
with these parts of the vehicle, you could burn
yourself. There is a risk of injury.
Always be particularly careful around the
exhaust tail pipe and the tail pipe trim. Allow
these components to cool down before touch-
ing them.
!
Do not clean the exhaust pipe with acid-
based cleaning agents such as sanitary
cleansers or wheel cleaners.
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
pipe by cleaning it regularly, especially in win-
ter and after washing.
X
Clean the exhaust pipe with a care product
tested and approved by Mercedes-Benz.
340
Care
Maintenance and care
Interior care
Cleaning the display
!
For cleaning, do not use any of the fol-
lowing:
R
alcohol-based thinner or gasoline
R
abrasive cleaning agents
R
commercially-available household clean-
ing agents
These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to irrepara-
ble damage to the display.
X
Before cleaning the display, make sure that
it is switched off and has cooled down.
X
Clean the display surface using a commer-
cially available microfiber cloth and
TFT/LCD display cleaner.
X
Dry the display surface using a dry micro-
fiber cloth.
Cleaning the plastic trim
G
WARNING
Care products and cleaning agents containing
solvents cause surfaces in the cockpit to
become porous. As a result, plastic parts may
come loose in the event of air bag deploy-
ment. There is a risk of injury.
Do not use any care products and cleaning
agents to clean the cockpit.
!
Do not affix the following to plastic surfa-
ces:
R
stickers
R
films
R
scented oil bottles or similar items
You can otherwise damage the plastic.
!
Do not allow cosmetics, insect repellent
or sunscreen to come into contact with the
plastic trim. This maintains the high-quality
look of the surfaces.
X
Wipe the plastic trim with a damp, lint-free
cloth, e.g. a microfiber cloth.
X
Heavy soiling: use care and cleaning prod-
ucts recommended and approved by
Mercedes-Benz.
The surface may change color temporarily.
Wait until the surface is dry again.
Cleaning the steering wheel and gear or
selector lever
X
Thoroughly wipe with a damp cloth or use
leather care agents that have been recom-
mended and approved by Mercedes-Benz.
Cleaning genuine wood and trim ele-
ments
!
Do not use solvent-based cleaning agents
such as tar remover, wheel cleaners, pol-
ishes or waxes. There is otherwise a risk of
damaging the surface.
!
Do not use chrome polish on trim pieces.
The trim pieces have a chrome look but are
mostly made of anodized aluminum and
can lose their shine if chrome polish is
used. Use a damp, lint-free cloth instead
when cleaning the trim pieces.
If the chrome-plated trim pieces are very
dirty, you can use a chrome polish. If you
are unsure as to whether the trim pieces
are chrome-plated or not, consult an
authorized Mercedes-Benz Center.
X
Wipe the wooden trim and trim pieces with
a damp, lint-free cloth, e.g. a microfiber
cloth.
X
Heavy soiling: use car care and cleaning
products recommended and approved by
Mercedes-Benz.
Cleaning the seat covers
General notes
!
Do not use microfiber cloths to clean gen-
uine leather, artificial leather or DINAMICA
Care
341
Maintenance and care
Z
covers. If used often, these can damage the
cover.
i
Note that regular care is essential to
ensure that the appearance and comfort of
the covers is retained over time.
Genuine leather seat covers
Leather is a natural product.
It exhibits natural surface characteristics, for
example:
R
differences in the texture
R
marks caused by growth and injury
R
slight nuances of color
These are characteristics of leather and not
material defects.
!
To retain the natural appearance of the
leather, observe the following cleaning
instructions:
R
Clean genuine leather covers carefully
with a damp cloth and then wipe the cov-
ers down with a dry cloth.
R
Make sure that the leather does not
become soaked. It may otherwise
become rough and cracked.
R
Only use leather care agents that have
been tested and approved by Mercedes-
Benz. You can obtain these from a quali-
fied specialist workshop.
Seat covers of other materials
!
Observe the following when cleaning:
R
clean artificial leather covers with a cloth
moistened with a solution containing 1%
detergent (e.g. dish washing liquid).
R
clean cloth covers with a microfiber cloth
moistened with a solution containing 1%
detergent (e.g. dish washing liquid). Rub
carefully and always wipe entire seat sec-
tions to avoid leaving visible lines. Leave
the seat to dry afterwards. Cleaning
results depend on the type of dirt and
how long it has been there.
R
clean DINAMICA covers with a damp
cloth. Make sure that you wipe entire
seat sections to avoid leaving visible
lines.
Cleaning the seat belts
G
WARNING
Seat belts can become severely weakened if
bleached or dyed. This could cause the seat
belts to tear or fail, for instance, in the event of
an accident. This poses an increased risk of
injury or fatal injury.
Never bleach or dye the seat belts.
!
Do not clean the seat belts using chemical
cleaning agents. Do not dry the seat belts
by heating at temperatures above 176
(80 †) or in direct sunlight.
X
Use clean, lukewarm water and soap solu-
tion.
Cleaning the headliner and carpets
X
Headliner: if it is very dirty, use a soft brush
or dry shampoo.
X
Carpets: use the carpet and textile clean-
ing agents recommended and approved by
Mercedes-Benz.
342
Care
Maintenance and care
Useful information ............................ 344
Where will I find...? ........................... 344
Flat tire .............................................. 345
Battery (vehicle) ................................ 349
Jump-starting .................................... 353
Towing and tow-starting .................. 355
Fuses .................................................. 358
343
Roadside Assistance
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Where will I find...?
Vehicle tool kit
General notes
The vehicle tool kit can be found in the stow-
age well under the trunk floor/cargo com-
partment floor (Y page 306). Depending on
the vehicle equipment, the vehicle tool kit is
on the left-hand side or the right-hand side in
the stowage well under the trunk floor/cargo
compartment floor.
Vehicles with a TIREFIT kit
Vehicle tool kit in the left-hand stowage well (exam-
ple: equipment and country-specific variations
possible)
:
Tire sealant filler bottle
;
Folding wheel chock
=
One pair of gloves (under jack)
?
Tire inflation compressor
A
Towing eye
B
Jack
C
Alignment bolt
D
Fuse allocation chart
E
Lug wrench
X
Open the trunk lid/tailgate.
X
Sedan: lift up the floor of the trunk
(Y page 306).
Vehicles with a spare
wheel/"Minispare" emergency spare
wheel
(Example: equipment and country-specific varia-
tions possible)
:
Vehicle tool kit tray
;
Stowage well
=
Spare wheel/"Minispare" emergency
spare wheel
X
Open the trunk lid/tailgate.
X
Sedan: lift up the floor of the trunk
(Y page 306).
The vehicle tool kit contains:
R
Folding wheel chock
R
Fuse allocation chart
R
Jack
R
Alignment bolt
R
One pair of gloves
R
Lug wrench
R
Towing eye
344
Where will I find...?
Roadside Assistance
Vehicles with a collapsible spare wheel
(Example: equipment and country-specific varia-
tions possible)
:
Towing eye
;
One pair of gloves
=
Jack
?
Folding wheel chock
A
Alignment bolt
B
Sheet for faulty wheel
C
Tire inflation compressor
D
Lug wrench
E
Fuse allocation chart
X
Open the trunk lid.
X
Lift the trunk floor upwards (Y page 306).
Flat tire
Preparing the vehicle
Your vehicle may be equipped with:
R
MOExtended tires (tires with run-flat prop-
erties) (Y page 345)
Vehicle preparation is not necessary on
vehicles with MOExtended tires
R
a TIREFIT kit (Y page 344)
R
an emergency spare wheel (Y page 404)
Information on changing/mounting a wheel
(Y page 384).
X
Stop the vehicle on solid, non-slippery and
level ground, as far away as possible from
traffic.
X
Switch on the hazard warning lamps.
X
Secure the vehicle against rolling away
(Y page 179).
X
If possible, bring the front wheels into the
straight-ahead position.
X
Vehicles with AIRMATIC: make sure that
"normal" level is selected (Y page 202).
X
Switch off the engine.
X
Vehicles without KEYLESS-GO: remove
the SmartKey from the ignition lock.
X
Vehicles with KEYLESS-GO: open the
driver's door.
The on-board electronics now have status
0. This is the same as the SmartKey having
been removed.
X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock
(Y page 158).
X
All occupants must get out of the vehicle.
Make sure that they are not endangered as
they do so.
X
Make sure that no one is near the danger
area while a wheel is being changed. Any-
one who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.
X
Get out of the vehicle. Pay attention to traf-
fic conditions when doing so.
X
Close the driver's door.
MOExtended tires (tires with run-flat
properties)
General notes
With MOExtended tires (tires with run flat
characteristics), you can continue to drive
your vehicle even if there is a total loss of
pressure in one or more tires. The affected
tire must not show any clearly visible damage.
You can recognize MOExtended tires by the
MOExtended marking which appears on the
sidewall of the tire. You will find this marking
next to the tire size designation, the load-
bearing capacity and the speed index
(Y page 378).
Flat tire
345
Roadside Assistance
MOExtended tires may only be used in con-
junction with an active tire pressure monitor.
If the pressure loss warning message
appears in the multifunction display:
R
Observe the instructions in the display
messages (Y page 274).
R
Check the tire for damage.
R
If driving on, observe the following notes.
The maximum driving distance is approx-
imately 50 miles (80 km) when the vehicle is
partially laden and approximately 18 miles
(30 km) when the vehicle is fully laden.
In addition to the vehicle load, the driving dis-
tance possible depends upon:
R
Speed
R
Road condition
R
Outside temperature
The driving distance possible in run-flat mode
may be reduced by extreme driving condi-
tions/maneuvers, or it can be increased
through a moderate style of driving.
The maximum permissible distance which
can be driven in run-flat mode is counted from
the moment the tire pressure loss warning
appears in the multifunction display.
You must not exceed a maximum speed of
50 mph (80 km/h).
i When replacing one or all tires, make sure
that you use only tires:
R
of the size specified for the vehicle and
R
marked "MOExtended"
If a tire has gone flat and cannot be
replaced with a MOExtended tire, a stand-
ard tire may be used as a temporary meas-
ure. Make sure that you use the proper size
and type (summer or winter tire).
i
Vehicles equipped with MOExtended tires
are not equipped with a TIREFIT kit at the
factory. It is therefore recommended that
you additionally equip your vehicle with a
TIREFIT kit if you mount tires that do not
feature run-flat properties, e.g. winter tires.
A TIREFIT kit may be obtained from a quali-
fied specialist workshop.
Important safety notes
G
WARNING
When driving in emergency mode, the driving
characteristics deteriorate, e.g. when corner-
ing, accelerating quickly and when braking.
There is a risk of an accident.
Do not exceed the stated maximum speed.
Avoid abrupt steering and driving maneuvers,
and driving over obstacles (curbs, potholes,
off-road). This applies in particular to a laden
vehicle.
Stop driving in emergency mode if:
R
you hear banging noises.
R
the vehicle starts to shake.
R
you see smoke and smell rubber.
R
ESP
®
is intervening constantly.
R
there are tears in the sidewalls of the tire.
After driving in emergency mode, have the
wheel rims checked at a qualified specialist
workshop with regard to their further use. The
defective tire must be replaced in every case.
TIREFIT kit
Important safety notes
TIREFIT is a tire sealant.
You can use TIREFIT to seal punctures of up to
0.16 in (4 mm), particularly those in the tire
tread. You can use TIREFIT at outside tem-
peratures down to Ò4 (Ò20 †).
G
WARNING
In the following situations, the tire sealant is
unable to provide sufficient breakdown assis-
tance, as it is unable to seal the tire properly:
R
there are cuts or punctures in the tire larger
than those mentioned above.
R
the wheel rim is damaged.
R
you have driven at very low tire pressures or
on a flat tire.
346
Flat tire
Roadside Assistance
There is a risk of an accident.
Do not drive the vehicle. Contact a qualified
specialist workshop.
G
WARNING
The tire sealant is harmful and causes irrita-
tion. It must not come into contact with your
skin, eyes or clothing or be swallowed. Do not
inhale TIREFIT fumes. Keep tire sealant away
from children. There is a risk of injury.
If you come into contact with the tire sealant,
observe the following:
R
Rinse off the tire sealant from your skin
immediately with water.
R
If the tire sealant comes into contact with
your eyes, immediately rinse them thor-
oughly with clean water.
R
If tire sealant is swallowed, immediately
rinse your mouth out thoroughly and drink
plenty of water. Do not induce vomiting,
and seek medical attention immediately.
R
Immediately change out of clothing which
has come into contact with tire sealant.
R
If an allergic reaction occurs, seek medical
attention immediately.
!
Do not operate the tire inflation compres-
sor for longer than eight minutes at a time
without a break. It may otherwise overheat.
The tire inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer’s safety
instructions on the sticker on the tire inflation
compressor.
Using the TIREFIT kit
TIREFIT sticker, 2-part
X
Do not remove any foreign objects which
have penetrated the tire, e.g. screws or
nails.
X
Remove the tire sealant bottle, the accom-
panying TIREFIT sticker and the tire infla-
tion compressor from the stowage well
underneath the trunk floor/cargo compart-
ment floor (Y page 344).
X
Affix part : of the TIREFIT sticker within
the driver's field of vision.
X
Affix part ; of the TIREFIT sticker near the
valve on the wheel with the defective tire.
X
Pull plug ? with the cable and hose A out
of the housing.
X
Screw hose A onto flange B of tire seal-
ant bottle :.
X
Place tire sealant bottle : head down-
wards into recess ; of the tire inflation
compressor.
Flat tire
347
Roadside Assistance
Z
X
Remove the cap from valve C on the faulty
tire.
X
Screw filler hose D onto valve C.
X
Insert connector ? into a 12 V socket
(Y page 314) in your vehicle.
X
Turn the SmartKey to position 1 in the igni-
tion lock (Y page 157).
X
Press on/off switch = on the tire inflation
compressor to I.
The tire inflation compressor is switched
on. The tire is inflated.
First, tire sealant is pumped into the tire.
The pressure can briefly rise to approx-
imately 500 kPa (5 bar/73 psi).
Do not switch off the tire inflation com-
pressor during this phase.
X
Allow the tire inflation compressor to run
for five minutes. The tire should then have
attained a pressure of at least 180 kPa
(1.8 bar/26 psi).
If a pressure of 180 kPa (1.8 bar/26 psi) has
been attained after five minutes, see "Tire
pressure reached" (Y page 348).
If a tire pressure of 180 kPa (1.8 bar/26 psi)
has not been attained after five minutes, see
"Tire pressure not reached" (Y page 348).
If tire sealant leaks out, allow it to dry. It can
then be removed like a layer of film.
If your clothes are soiled with tire sealant,
have them cleaned with perchloroethylene at
a dry cleaner as soon as possible.
Tire pressure not reached
If a pressure of 180 kPa (1.8 bar/26 psi) has
not been attained after five minutes:
X
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of
the faulty tire.
X
Very slowly drive forwards or reverse
approximately 30 ft (10 m).
X
Pump up the tire again.
After a maximum of five minutes the tire
pressure must be at least 180 kPa (1.8 bar/
26 psi).
G
WARNING
If the required tire pressure is not reached
after the specified time, the tire is too badly
damaged. The tire sealant cannot repair the
tire in this instance. Damaged tires and a tire
pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
Tire pressure reached
G
WARNING
A tire temporarily sealed with tire sealant
impairs the driving characteristics and is not
suitable for higher speeds. There is a risk of
accident.
You should therefore adapt your driving style
accordingly and drive carefully. Do not exceed
the specified maximum speed with a tire that
has been repaired using tire sealant.
The maximum speed for a tire sealed with tire
sealant is 50 mph (80 km/h). The upper part
of the TIREFIT sticker must be affixed to the
instrument cluster in the driver's field of
vision.
!
Residue from the tire sealant may come
out of the filler hose after use. This could
cause stains.
348
Flat tire
Roadside Assistance
Therefore, place the filler hose in the plastic
bag which contained the TIREFIT kit.
H
Environmental note
Have the used tire sealant bottle disposed of
professionally, e.g. at a qualified specialist
workshop.
If a tire pressure of 180 kPa (1.8 bar/26 psi)
has been attained after five minutes:
X
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of
the faulty tire.
X
Stow the tire sealant bottle and the tire
inflation compressor.
X
Pull away immediately.
X
Stop after driving for approximately ten
minutes and check the tire pressure with
the tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
i
In cases such as the one mentioned
above, contact an authorized Mercedes-
Benz Center. Or call 1-800-FOR-MERCedes
(in the USA) or 1-800-387-0100 (in Can-
ada).
X
Correct the tire pressure if it is still at least
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the driver's
side B-pillar or the tire pressure table in the
fuel filler flap for values.
X
To increase the tire pressure: switch on
the tire inflation compressor.
X
To reduce the tire pressure: depress
pressure release button E next to pres-
sure gauge F.
X
When the tire pressure is correct, unscrew
the filler hose from the valve of the sealed
tire.
X
Screw the valve cap onto the tire valve of
the sealed tire.
X
Pull the tire sealant bottle out of the tire
inflation compressor.
The filler hose remains attached to the tire
sealant bottle.
X
Stow the tire sealant bottle and the tire
inflation compressor.
X
Drive to the nearest qualified specialist
workshop and have the tire changed there.
X
Have the tire sealant bottle replaced as
soon as possible at a qualified specialist
workshop.
X
Have the tire sealant bottle replaced every
four years at a qualified specialist work-
shop.
Battery (vehicle)
Important safety notes
Special tools and expert knowledge are
required when working on the battery, e.g.
removal and installation. You should there-
fore have all work involving the battery car-
ried out at a qualified specialist workshop.
Battery (vehicle)
349
Roadside Assistance
Z
G
WARNING
Work carried out incorrectly on the battery
can lead, for example, to a short circuit and
thus damage the vehicle electronics. This can
lead to function restrictions applying to
safety-relevant systems, e.g. the lighting sys-
tem, ABS (anti-lock braking system) or ESP
®
(Electronic Stability Program). The operating
safety of your vehicle may be restricted. You
could lose control of the vehicle, for example:
R
braking
R
in the event of abrupt steering maneuver
and/or when the vehicle's speed is not
adapted to the road conditions
There is a risk of an accident.
In the event of a short circuit or a similar inci-
dent, contact a qualified specialist workshop
immediately. Do not drive any further. You
should have all work involving the battery car-
ried out at a qualified specialist workshop.
For further information about ABS and ESP
®
,
see (Y page 69) and (Y page 74).
G
WARNING
Electrostatic build-up can lead to the creation
of sparks, which could ignite the highly explo-
sive gases of a battery. There is a risk of an
explosion.
Before handling the battery, touch the vehicle
body to remove any existing electrostatic
build-up.
The highly flammable gas mixture forms when
charging the battery as well as when jump-
starting.
Always make sure that neither you nor the
battery is electrostatically charged. A build-
up of electrostatic charge can be caused, for
example:
R
by wearing clothing made from synthetic
fibers
R
due to friction between clothing and seats
R
if you push or pull the battery across the
carpet or other synthetic materials
R
if you wipe the battery with a cloth
G
WARNING
During the charging process, a battery produ-
ces hydrogen gas. If a short circuit occurs or
sparks are created, the hydrogen gas can
ignite. There is a risk of an explosion.
R
Make sure that the positive terminal of a
connected battery does not come into con-
tact with vehicle parts.
R
Never place metal objects or tools on a bat-
tery.
R
It is important that you observe the descri-
bed order of the battery terminals when
connecting and disconnecting a battery.
R
When jump-starting, make sure that the
battery poles with identical polarity are
connected.
R
It is particularly important to observe the
described order when connecting and dis-
connecting the jumper cables.
R
Never connect or disconnect the battery
terminals while the engine is running.
G
WARNING
Battery acid is caustic. There is a risk of injury.
Avoid contact with the skin, eyes or clothing.
Do not inhale any battery gases. Do not lean
over the battery. Keep children away from
batteries. Wash battery acid immediately with
water and seek medical attention.
H
Environmental note
Batteries contain dangerous
substances. It is against the
law to dispose of them with
the household rubbish. They
must be collected separately
and recycled to protect the
environment.
Dispose of batteries in an
environmentally friendly
manner. Take discharged
batteries to a qualified spe-
cialist workshop or a special
collection point for used bat-
teries.
350
Battery (vehicle)
Roadside Assistance
!
Have the battery checked regularly at a
qualified specialist workshop.
Observe the service intervals in the Main-
tenance Booklet or contact a qualified spe-
cialist workshop for more information.
!
You should have all work involving the
battery carried out at a qualified specialist
workshop. In the exceptional case that it is
necessary for you to disconnect the battery
yourself, make sure that:
R
you switch off the engine and remove the
SmartKey. On vehicles with KEYLESS-
GO, ensure that the ignition is switched
off. Check that all the indicator lamps in
the instrument cluster are off. Otherwise,
electronic components, such as the
alternator, may be damaged.
R
you first remove the negative terminal
clamp and then the positive terminal
clamp. Never swap the terminal clamps.
Otherwise, the vehicle's electronic sys-
tem may be damaged.
R
the transmission is locked in position P
after disconnecting the battery. The vehi-
cle is secured against rolling away. You
can then no longer move the vehicle.
The battery and the cover of the positive
terminal clamp must be installed securely
during operation.
Comply with safety precautions and take pro-
tective measures when handling batteries.
Risk of explosion.
Fire, open flames and smoking are
prohibited when handling the bat-
tery. Avoid creating sparks.
Battery acid is caustic. Avoid con-
tact with skin, eyes or clothing.
Wear suitable protective clothing,
especially gloves, apron and face-
guard.
Rinse any acid spills immediately
with clear water. Contact a physi-
cian if necessary.
Wear eye protection.
Keep children away.
Observe this Operator's Manual.
HYBRID vehicles: make sure that you read
the "HYBRID" supplement included in the
vehicle literature. You could otherwise fail to
recognize dangers e.g. due to high voltage.
For safety reasons, Mercedes-Benz recom-
mends that you only use batteries which have
been tested and approved for your vehicle by
Mercedes-Benz. These batteries provide
increased impact protection to prevent vehi-
cle occupants from suffering acid burns
should the battery be damaged in the event of
an accident.
In order for the battery to achieve the maxi-
mum possible service life, it must always be
sufficiently charged.
The vehicle battery, like other batteries, can
discharge over time if you do not use the
vehicle. In this case, have the battery discon-
nected at a qualified specialist workshop. You
can also charge the battery with a charger
recommended by Mercedes-Benz. Contact a
qualified specialist workshop for further infor-
mation.
Have the battery condition of charge checked
more frequently if you use the vehicle mainly
for short trips or if you leave it standing idle
for a lengthy period. Consult a qualified spe-
cialist workshop if you wish to leave your
vehicle parked for a long period of time.
i
Remove the SmartKey if you park the
vehicle and do not require any electrical
consumers. The vehicle will then use very
Battery (vehicle)
351
Roadside Assistance
Z
little energy, thus conserving battery
power.
Charging the battery
G
WARNING
During charging and jump-starting, explosive
gases can escape from the battery. There is a
risk of an explosion.
Particularly avoid fire, open flames, creating
sparks and smoking. Ensure there is sufficient
ventilation while charging and jump-starting.
Do not lean over a battery.
G
WARNING
Battery acid is caustic. There is a risk of injury.
Avoid contact with the skin, eyes or clothing.
Do not inhale any battery gases. Do not lean
over the battery. Keep children away from
batteries. Wash battery acid immediately with
water and seek medical attention.
G
WARNING
A discharged battery can freeze at tempera-
tures below freezing point. When jump-start-
ing the vehicle or charging the battery, gases
can escape from the battery. There is a risk of
an explosion.
Allow the frozen battery to thaw out before
charging it or jump-starting.
!
Only use battery chargers with a maxi-
mum charging voltage of 14.8 V.
!
Only charge the battery using the jump-
starting connection point.
The jump-starting connection point is in the
engine compartment (Y page 353).
X
Open the hood.
X
Connect the battery charger to the positive
terminal and ground point in the same
order as when connecting the donor bat-
tery in the jump-starting procedure
(Y page 353).
If, at low temperatures, the indicator lamps/
warning lamps in the instrument cluster do
not light up, it is highly likely that the dis-
charged battery has frozen. In this case, you
may neither charge the battery nor jump-start
the vehicle. The service life of a thawed-out
battery may be shorter. The starting charac-
teristics may be impaired, especially at low
temperatures. Have the thawed-out battery
checked at a qualified specialist workshop.
Never charge a battery still installed in the
vehicle unless a battery charger unit
approved by Mercedes-Benz is being used. A
battery charger unit specially adapted for
Mercedes-Benz vehicles and tested and
approved by Mercedes-Benz is available as an
accessory. It permits the charging of the bat-
tery in its installed position. Contact an
authorized Mercedes-Benz Center for further
information and availability. Read the battery
charger's operating instructions before
charging the battery.
352
Battery (vehicle)
Roadside Assistance
Jump-starting
For the jump-starting procedure, use only the jump-starting connection point, consisting of a
positive terminal and a ground point, in the engine compartment.
G
WARNING
Battery acid is caustic. There is a risk of injury.
Avoid contact with the skin, eyes or clothing. Do not inhale any battery gases. Do not lean over the
battery. Keep children away from batteries. Wash battery acid immediately with water and seek
medical attention.
G
WARNING
During charging and jump-starting, explosive gases can escape from the battery. There is a risk
of an explosion.
Particularly avoid fire, open flames, creating sparks and smoking. Ensure there is sufficient ven-
tilation while charging and jump-starting. Do not lean over a battery.
G
WARNING
During the charging process, a battery produces hydrogen gas. If a short circuit occurs or sparks
are created, the hydrogen gas can ignite. There is a risk of an explosion.
R
Make sure that the positive terminal of a connected battery does not come into contact with
vehicle parts.
R
Never place metal objects or tools on a battery.
R
It is important that you observe the described order of the battery terminals when connecting
and disconnecting a battery.
R
When jump-starting, make sure that the battery poles with identical polarity are connected.
R
It is particularly important to observe the described order when connecting and disconnecting
the jumper cables.
R
Never connect or disconnect the battery terminals while the engine is running.
G
WARNING
A discharged battery can freeze at temperatures below freezing point. When jump-starting the
vehicle or charging the battery, gases can escape from the battery. There is a risk of an explosion.
Allow the frozen battery to thaw out before charging it or jump-starting.
!
Vehicles with a gasoline engine: avoid repeated and lengthy starting attempts. Other-
wise, the catalytic converter could be damaged by non-combusted fuel.
HYBRID vehicles: make sure that you read the "HYBRID" supplement included in the vehicle
literature. You could otherwise fail to recognize dangers e.g. due to high voltage.
Jump-starting
353
Roadside Assistance
Z
Do not start the vehicle using a rapid charging device. If your vehicle's battery is discharged,
the engine can be jump-started from another vehicle or from a second battery using jumper
cables. Observe the following points:
R
The battery is not accessible in all vehicles. If the other vehicle's battery is not accessible,
jump-start the vehicle using a second battery or a jump-starting device.
R
Vehicles with a gasoline engine: only jump-start the vehicle when the engine and exhaust
system are cold.
R
Do not start the engine if the battery is frozen. Let the battery thaw first.
R
Only jump-start from batteries with a 12 V voltage rating.
R
Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.
R
If the battery is fully discharged, leave the battery that is being used to jump-start connected
for a few minutes before attempting to start. This charges the battery slightly.
R
Make sure that the two vehicles do not touch.
Make sure that:
R
the jumper cables are not damaged.
R
when the jumper cables are connected to the battery, uninsulated sections of the terminal
clamp do not come into contact with other metal sections.
R
the jumper cables cannot come into contact with parts which can move when the engine is
running, such as the V-belt pulley or the fan.
X
Apply the parking brake firmly.
X
Shift the transmission to position P.
X
Switch off all electrical consumers, e.g. rear window defroster, lighting, etc.
X
Open the hood.
Position number B identifies the charged battery of the other vehicle or an equivalent jump-
starting device.
354
Jump-starting
Roadside Assistance
X
Slide cover : of positive terminal ; in the direction of the arrow.
X
Connect positive terminal ; on your vehicle to positive terminal = of donor battery B
using the jumper cable, always begin with positive terminal ; on your own vehicle first.
X
Start the engine of the donor vehicle and run it at idling speed.
X
Connect negative terminal ? of donor battery B to ground point A of your vehicle using
the jumper cable, connecting the jumper cable to battery of other vehicle B first.
X
Start the engine.
X
Before disconnecting the jumper cables, let the engine run for several minutes.
X
First, remove the jumper cables from earth point A and negative terminal ?, then from
positive clamp ; and positive terminal =. Begin each time at the contacts on your own
vehicle first.
X
Close cover : of positive clamp ; after removing the jumper cables.
X
Have the battery checked at a qualified specialist workshop.
i
Jump-starting is not considered to be a normal operating condition.
i
Jumper cables and further information regarding jump-starting can be obtained at any
qualified specialist workshop.
Towing and tow-starting
Important safety notes
G
WARNING
Functions relevant to safety are restricted or
no longer available if:
R
the engine is not running.
R
the brake system or the power steering is
malfunctioning.
R
there is a malfunction in the voltage supply
or the vehicle's electrical system.
If your vehicle is being towed, much more
force may be necessary to steer or brake.
There is a risk of an accident.
In such cases, use a tow bar. Before towing,
make sure that the steering moves freely.
G
WARNING
When towing or tow-starting another vehicle
and its weight is greater than the permissible
gross weight of your vehicle, the:
R
the towing eye could detach itself
R
the vehicle/trailer combination could roll-
over.
There is a risk of an accident.
When towing or tow-starting another vehicle,
its weight should not be greater than the per-
missible gross weight of your vehicle.
i
Details on the permissible gross vehicle
weight of your vehicle can be found on the
vehicle identification plate (Y page 410).
!
If DISTRONIC PLUS or the HOLD function
is activated, the vehicle brakes automati-
cally in certain situations. To prevent dam-
age to the vehicle, deactivate DISTRONIC
PLUS and the HOLD function in the follow-
ing or other similar situations:
R
when towing the vehicle
R
in the car wash
!
Only secure the tow rope or tow bar at the
towing eyes. Otherwise, the vehicle could
be damaged.
!
Do not use the towing eye for recovery,
this could damage the vehicle. If in doubt,
recover the vehicle with a crane.
Towing and tow-starting
355
Roadside Assistance
Z
!
When towing, pull away slowly and
smoothly. If the tractive power is too high,
the vehicles could be damaged.
!
Do not tow with sling-type equipment.
This could damage the vehicle.
!
When towing vehicles with KEYLESS-GO,
use the key instead of the Start/Stop but-
ton. Otherwise, the automatic transmission
may shift to position P when the driver's or
front-passenger door are opened, which
could lead to damage to the transmission.
!
The vehicle can be towed a maximum of
30 miles (50km). The towing speed of
30 mph (50 km/h) must not be exceeded.
If the vehicle has to be towed more than
30 miles (50km), the entire vehicle must be
raised and transported.
!
If you tow or tow-start another vehicle, its
weight must not exceed the maximum per-
missible gross vehicle weight of your vehi-
cle.
HYBRID vehicles: make sure that you read
the "HYBRID" supplement included in the
vehicle literature. You could otherwise fail to
recognize dangers e.g. due to high voltage.
It is better to have the vehicle transported
than to have it towed away.
If the vehicle has suffered transmission dam-
age, have it transported on a transporter or
trailer.
The automatic transmission must be in posi-
tion N when the vehicle is being towed.
The battery must be connected and charged.
Otherwise, you:
R
cannot turn the SmartKey to position 2 in
the ignition lock
R
cannot shift the automatic transmission to
position N
i
Disarm the automatic locking feature
before the vehicle is towed (Y page 90). You
could otherwise be locked out when push-
ing or towing the vehicle.
Installing/removing the towing eye
Installing the towing eye
G
WARNING
The exhaust tail pipe may be very hot. There is
a risk of burns when removing the rear cover.
Do not touch the exhaust pipe. Take particular
care when removing the rear cover.
Towing eye covers (example: Sedan)
The mountings for the removable towing eyes
are located in the bumpers. They are at the
front and at the rear, behind the covers.
X
Remove the towing eye from the vehicle
tool kit (Y page 344).
X
Press the mark on cover : inwards in the
direction of the arrow.
X
Take cover : off the opening.
X
Screw in and tighten the towing eye clock-
wise to the stop.
Removing the towing eye
X
Unscrew and remove the towing eye.
X
Attach cover : to the bumper and press
until it engages.
X
Place the towing eye in the vehicle tool kit.
356
Towing and tow-starting
Roadside Assistance
Towing a vehicle with both axles on
the ground
It is important that you observe the safety
instructions when towing away your vehicle
(Y page 355).
The automatic transmission automatically
shifts to position P when you open the driver's
or front-passenger door or when you remove
the SmartKey from the ignition lock. In order
to ensure that the automatic transmission
stays in position N when towing the vehicle,
you must observe the following points:
X
Make sure that the vehicle is stationary and
the SmartKey in the ignition lock is in posi-
tion 0.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
On vehicles with KEYLESS-GO, use the
SmartKey instead of the Start/Stop button
(Y page 158).
X
Depress and hold the brake pedal.
X
Shift the automatic transmission to posi-
tion N.
X
Release the brake pedal.
X
Release the parking brake.
X
Switch on the hazard warning lamps
(Y page 131).
X
Leave the SmartKey in position 2 in the
ignition lock.
i
When towing with the hazard warning
lamps switched on, use the combination
switch as usual to signal a change of direc-
tion. In this case, only the indicator lamps
for the direction of travel flash. After reset-
ting the combination switch, the hazard
warning lamp starts flashing again.
Towing the vehicle with the rear axle
raised
!
The ignition must be switched off if you
are towing the vehicle with the rear axle
raised. Intervention by ESP
®
could other-
wise damage the brake system.
Only possible for vehicles without
4MATIC.
X
Switch on the hazard warning lamps
(Y page 131).
X
Bring the front wheels into the straight-
ahead position.
X
Turn the SmartKey in the ignition lock to
position 0 and remove the SmartKey from
the ignition lock.
X
When leaving the vehicle, take the Smart-
Key or the KEYLESS-GO key with you.
When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions (Y page 355).
Transporting the vehicle
!
You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise,
the vehicle could be damaged.
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporting
purposes.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
X
Shift the automatic transmission to posi-
tion N.
As soon as the vehicle has been loaded:
X
Prevent the vehicle from rolling away by
applying the parking brake.
X
Shift the automatic transmission to posi-
tion P.
X
Turn the SmartKey to position 0 in the igni-
tion lock and remove the SmartKey from
the ignition lock.
X
Secure the vehicle.
Notes on 4MATIC vehicles
!
Vehicles with 4MATIC must not be towed
with either the front or the rear axle raised,
as doing so will damage the transmission.
Towing and tow-starting
357
Roadside Assistance
Z
If the vehicle has transmission damage or
damage to the front or rear axle, have it trans-
ported on a transporter or trailer.
In the event of damage to the electrical
system
If the battery is defective, the automatic
transmission will be locked in position P. To
shift the automatic transmission to position
N, you must provide power to the vehicle's
electrical system in the same way as when
jump-starting (Y page 353).
Have the vehicle transported on a transporter
or trailer.
Tow-starting (emergency engine
starting)
!
Vehicles with automatic transmission
must not be started by tow-starting. This
could otherwise damage the transmission.
i
You can find information on "Jump-start-
ing" at (Y page 353).
Fuses
Important safety notes
G
WARNING
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric cables could be overloaded.
This could result in a fire. There is a risk of an
accident and injury.
Always replace faulty fuses with the specified
new fuses having the correct amperage.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Blown fuses must be replaced with fuses of
the same rating, which you can recognize by
the color and value. The fuse ratings are listed
in the fuse allocation chart.
If a newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. an authorized
Mercedes-Benz Center.
Before changing a fuse
Observe the important safety notes
(Y page 358)
X
Switch the engine off.
X
Remove the SmartKey from the ignition
lock.
or, on vehicles with KEYLESSGO:
X
Open the driver's door.
The on-board electronics now have status
0. This is the same as the SmartKey having
been removed.
The driver’s door can be closed again.
All indicator lamps in the instrument cluster
must be off.
The fuses are located in various fuse boxes:
R
Fuse box in the engine compartment on the
left-hand side of the vehicle, when viewed
in the direction of travel
R
Fuse box in the trunk/cargo compartment
on the right-hand side of the vehicle, when
viewed in the direction of travel
The fuse allocation chart is located in the
vehicle tool kit in the stowage compartment
under the trunk/cargo compartment floor
(Y page 344).
Fuse box in the engine compartment
Observe the important safety notes
(Y page 358)
358
Fuses
Roadside Assistance
G
WARNING
When the hood is open and the windshield
wipers are set in motion, you can be injured by
the wiper linkage. There is a risk of injury.
Always switch off the windshield wipers and
the ignition before opening the hood.
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
X
Make sure that the windshield wipers are
turned off.
X
Open the hood.
X
Use a dry cloth to remove any moisture
from the fuse box.
X
To open: remove lines ; from the guides.
X
Move lines ; aside. Route the lines behind
connection = to do this.
X
Open clamp :.
X
Remove the fuse box cover forwards.
X
To close: check whether the rubber seal is
lying correctly in the cover.
X
Insert the cover at the rear of the fuse box
into the retainer.
X
Fold down cover and close clamps :.
X
Secure lines ; in the guides.
X
Close the hood.
Fuse box in the trunk
Observe the important safety notes
(Y page 358)
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
X
Open the trunk lid.
X
To open: release cover : at the top right
and left-hand sides with a flat object.
X
Open cover : downwards in the direction
of the arrow.
Fuse box in the cargo compartment
Observe the important safety notes
(Y page 358)
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it
is lying correctly on the fuse box. Moisture
seeping in or dirt could otherwise impair
the operation of the fuses.
Fuses
359
Roadside Assistance
Z
X
Open the tailgate.
X
To open: pull handle : on the cover.
X
Open the cover downwards.
X
Swing paneling ; forwards.
360
Fuses
Roadside Assistance
Useful information ............................ 362
Important safety notes .................... 362
Operation ........................................... 362
Winter operation ............................... 364
Tire pressure ..................................... 366
Loading the vehicle .......................... 372
All about wheels and tires ............... 376
Changing a wheel ............................. 384
Wheel and tire combinations ........... 389
Emergency spare wheel ................... 404
361
Wheels and tires
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Important safety notes
G
WARNING
If wheels and tires of the wrong size are used,
the wheel brakes or suspension components
may be damaged. There is a risk of an acci-
dent.
Always replace wheels and tires with those
that fulfill the specifications of the original
part.
When replacing wheels, make sure to use the
correct:
R
designation
R
model
When replacing tires, make sure to use the
correct:
R
designation
R
manufacturer
R
model
G
WARNING
A flat tire severely impairs the driving, steer-
ing and braking characteristics of the vehicle.
There is a risk of accident.
Tires without run-flat characteristics:
R
do not drive with a flat tire.
R
immediately replace the flat tire with your
emergency spare wheel or spare wheel, or
consult a qualified specialist workshop.
Tires with run-flat characteristics:
R
pay attention to the information and warn-
ing notices on MOExtended tires (tires with
run-flat characteristics).
Accessories that are not approved for your
vehicle by Mercedes-Benz or are not being
used correctly can impair the operating
safety.
Before purchasing and using non-approved
accessories, visit a qualified specialist work-
shop and ask about:
R
suitability
R
legal stipulations
R
factory recommendations
Information on the dimensions and types of
wheels and tires for your vehicle can be found
in the "Wheel/tire combinations" section
(Y page 389).
Information on air pressure for the tires on
your vehicle can be found:
R
on the vehicle's Tire and Loading Informa-
tion placard on the B-pillar
R
on the tire pressure label on the fuel filler
flap
Operation
Information on driving
If the vehicle is heavily loaded, check the tire
pressures and correct them if necessary.
While driving, pay attention to vibrations,
noises and unusual handling characteristics,
e.g. pulling to one side. This may indicate that
the wheels or tires are damaged. If you sus-
pect that a tire is defective, reduce your
speed immediately. Stop the vehicle as soon
as possible to check the wheels and tires for
damage. Hidden tire damage could also be
causing the unusual handling characteristics.
If you find no signs of damage, have the tires
and wheels checked at a qualified specialist
workshop.
362
Operation
Wheels and tires
When parking your vehicle, make sure that
the tires do not get deformed by the curb or
other obstacles. If it is necessary to drive over
curbs, speed humps or similar elevations, try
to do so slowly and at an obtuse angle. Oth-
erwise, the tires, particularly the sidewalls,
may be damaged.
Regular checking of wheels and tires
G
WARNING
Damaged tires can cause tire inflation pres-
sure loss. As a result, you could lose control of
your vehicle. There is a risk of accident.
Check the tires regularly for signs of damage
and replace any damaged tires immediately.
Regularly check the wheels and tires of your
vehicle for damage at least once a month, as
well as after driving off-road or on rough
roads. Damaged wheels can cause a loss of
tire pressure. Pay particular attention to dam-
age such as:
R
cuts in the tires
R
punctures
R
tears in the tires
R
bulges on tires
R
deformation or severe corrosion on wheels
Regularly check the tire tread depth and the
condition of the tread across the whole width
of the tire (Y page 363). If necessary, turn the
front wheels to full lock in order to inspect the
inner side of the tire surface.
All wheels must have a valve cap to protect
the valve against dirt and moisture. Do not
mount anything onto the valve other than the
standard valve cap or other valve caps
approved by Mercedes-Benz for your vehicle.
Do not use any other valve caps or systems,
e.g. tire pressure monitoring systems.
Regularly check the pressure of all the tires
particularly prior to long trips. Adjust the tire
pressure as necessary (Y page 366).
Observe the notes on the emergency spare
wheel (Y page 404).
The service life of tires depends, among other
things, on the following factors:
R
Driving style
R
Tire pressure
R
Distance covered
Important safety notes on the tire
tread
G
WARNING
Insufficient tire tread will reduce tire traction.
The tire is no longer able to dissipate water.
This means that on wet road surfaces, the risk
of hydroplaning increases, in particular where
speed is not adapted to suit the driving con-
ditions. There is a risk of accident.
If the tire pressure is too high or too low, tires
may exhibit different levels of wear at differ-
ent locations on the tire tread. Thus, you
should regularly check the tread depth and
the condition of the tread across the entire
width of all tires.
Minimum tire tread depth for:
R
Summer tires: â in (3 mm)
R
M+S tires: ã in (4 mm)
For safety reasons, replace the tires before
the legally prescribed limit for the minimum
tire tread depth is reached.
Bar indicator : for tread wear is integrated
into the tire tread.
Treadwear indicators (TWI) are required by
law. Six indicators are positioned on the tire
tread. They are visible once a tread depth of
Operation
363
Wheels and tires
Z
approximately á in (1.6 mm) has been
reached. If this is the case, the tire is so worn
that it must be replaced.
Selecting, mounting and replacing
tires
R
Only mount tires and wheels of the same
type and make.
Exception: it is permissible to install a dif-
ferent type or make in the event of a flat
tire. Observe the "MOExtended tires (tires
with run-flat characteristics" section
(Y page 345).
R
Only mount tires of the correct size onto
the wheels.
R
Break in new tires at moderate speeds for
the first 60 miles (100 km). They only reach
their full performance after this distance.
R
Do not drive with tires which have too little
tread depth, as this significantly reduces
the traction on wet roads (hydroplaning).
R
Replace the tires after six years at the lat-
est, regardless of wear.
Observe the notes on the emergency spare
wheel (Y page 404).
MOExtended tires (tires with run-flat
properties)
With MOExtended tires (tires with run flat
characteristics), you can continue to drive
your vehicle even if there is a total loss of
pressure in one or more tires.
MOExtended tires may only be used in con-
junction with an active tire pressure monitor
and only on wheels specifically tested by
Mercedes-Benz.
Notes on driving with MOExtended tires with
a flat tire (Y page 345).
i
Vehicles equipped with MOExtended tires
are not equipped with a TIREFIT kit at the
factory. It is therefore recommended that
you additionally equip your vehicle with a
TIREFIT kit if you mount tires that do not
feature run-flat properties, e.g. winter tires.
A TIREFIT kit may be obtained from a quali-
fied specialist workshop.
Winter operation
General notes
Have your vehicle winter-proofed at a quali-
fied specialist workshop at the onset of win-
ter.
Observe the notes in the "Changing a wheel"
section (Y page 384).
Driving with summer tires
At temperatures below 45 ‡(+7 †), summer
tires lose elasticity and therefore traction and
braking power. Change the tires on your vehi-
cle to M+S tires. Using summer tires at very
cold temperatures could cause cracks to
form, thereby damaging the tires perma-
nently. Mercedes-Benz cannot accept
responsibility for this type of damage.
G
WARNING
Damaged tires can cause tire inflation pres-
sure loss. As a result, you could lose control of
your vehicle. There is a risk of accident.
Check the tires regularly for signs of damage
and replace any damaged tires immediately.
M+S tires
G
WARNING
M+S tires with a tire tread depth of less than
ã in (4 mm) are not suitable for use in winter
and do not provide sufficient traction. There is
a risk of an accident.
M+S tires with a tread depth of less than ã in
(4 mm) must be replaced immediately.
At temperatures below 45 ‡(+7 †), use win-
ter tires or all-season tires. Both types of tire
are identified by the M+S marking.
364
Winter operation
Wheels and tires
Only winter tires bearing the i snowflake
symbol in addition to the M+S marking pro-
vide the best possible grip in wintry road con-
ditions.
Only these tires will allow driving safety sys-
tems such as ABS and ESP
®
to function opti-
mally in winter. These tires have been devel-
oped specifically for driving in snow.
Use M+S tires of the same make and tread on
all wheels to maintain safe handling charac-
teristics.
Always observe the maximum permissible
speed specified for the M+S tires you have
mounted.
Once the winter tires are mounted:
X
Check the tire pressures (Y page 369).
X
Restart the tire pressure monitor
(Y page 369).
For more information on driving with the
emergency spare wheel, see (Y page 404).
Snow chains
G
WARNING
If snow chains are installed to the front
wheels, they may drag against the vehicle
body or chassis components. This could
cause damage to the vehicle or the tires.
There is a risk of an accident.
To avoid hazardous situations:
R
never install snow chains to the front
wheels
R
always install snow chains in pairs to the
rear wheels.
!
On vehicles with AIRMATIC, you must
drive at raised vehicle level if snow chains
have been mounted. The vehicle may oth-
erwise be damaged.
!
On some tire sizes there is not enough
space for snow chains. To avoid damage to
the vehicle or tires, observe the "Wheel and
tire combinations" section under "Tires and
wheels".
!
Vehicles with steel wheels: if you
mount snow chains on steel wheels, you
may damage the hub caps. Remove the hub
caps from the relevant wheels before
mounting the snow chains.
For safety reasons, Mercedes-Benz recom-
mends that you only use snow chains that
have been specially approved for your vehicle
by Mercedes-Benz, or are of a corresponding
standard of quality.
If you intend to mount snow chains, please
bear the following points in mind:
R
Snow chains may not be mounted on all
wheel/tire combinations. Permissible
wheel/tire combinations (Y page 389).
R
Only use snow chains when driving on
roads completely covered by snow.
Remove the snow chains as soon as possi-
ble when you come to a road that is not
snow-covered.
R
Local regulations may restrict the use of
snow chains. Observe the appropriate reg-
ulations if you wish to mount snow chains.
R
Do not exceed the maximum permissible
speed of 30 mph (50 km/h).
i
You may wish to deactivate ESP
®
when
pulling away with snow chains installed
(Y page 76). You can thereby allow the
wheels to spin in a controlled manner, ach-
ieving an increased driving force (cutting
action).
For more information on driving with the
emergency spare wheel, see (Y page 404).
Winter operation
365
Wheels and tires
Z
Tire pressure
Tire pressure specifications
Important safety notes
G
WARNING
Underinflated or overinflated tires pose the
following risks:
R
the tires may burst, especially as the load
and vehicle speed increase.
R
the tires may wear excessively and/or
unevenly, which may greatly impair tire
traction.
R
the driving characteristics, as well as steer-
ing and braking, may be greatly impaired.
There is a risk of an accident.
Follow recommended tire inflation pressures
and check the pressure of all the tires includ-
ing the spare wheel:
R
monthly, at least
R
if the load changes
R
before beginning a long journey
R
under different operating conditions, e.g.
off-road driving
If necessary, correct the tire pressure.
i
The specifications on the sample Tire and
Loading Information placard and tire pres-
sure tables are examples. Tire pressure
specifications are vehicle-specific and may
deviate from the data shown here. The tire
pressure specifications that are valid for
your vehicle can be found on the Tire and
Loading Information placard and tire pres-
sure table on the vehicle.
General notes
The recommended tire pressures for the tires
mounted at the factory can be found on the
labels described here.
Operation with the emergency spare
wheel (Y page 404).
Further information on tire pressures can be
obtained at a qualified specialist workshop.
Tire and Loading Information placard
:
Recommended tire pressures
The Tire and Loading Information placard is
on the B-pillar on the driver's side
(Y page 372).
The Tire and Loading Information placard con-
tains the recommended tire pressures for
cold tires. The recommended tire pressures
are valid for the maximum permissible load
and up to the maximum permissible vehicle
speed.
Tire pressure table
The tire pressure table is on the inside of the
fuel filler flap.
Example: tire pressure table for all tires permitted
for this vehicle by the factory
The tire pressure table contains the recom-
mended pressures for cold tires for various
operating conditions, i.e. differing load and
speed conditions.
366
Tire pressure
Wheels and tires
Example: tire pressure table with tire dimensions
If a tire size precedes a tire pressure, the tire
pressure information following is only valid
for that tire size. The load conditions "partially
laden" and "fully laden" are defined in the
table for different numbers of occupants and
amounts of luggage. The actual number of
seats may differ.
Some tire pressure tables show only the rim
diameters instead of the full tire size, e.g.
R18. Rim diameter is part of the tire size and
can be found on the tire sidewall
(Y page 378).
If the tire pressures have been set to the
lower values for lighter loads and/or lower
road speeds, the pressures should be reset to
the higher values:
R
if you want to drive with an increased load
and/or
R
if you want to drive at higher road speeds
i
The tire pressures for increased loads
and/or higher road speeds, shown in the
tire pressure table, may have a negative
effect on driving comfort.
If the tire pressure is not set correctly, this
can lead to an excessive build up of heat and
a sudden loss of pressure.
For more information, contact a qualified spe-
cialist workshop.
Important notes on tire pressure
G
WARNING
If the tire pressure drops repeatedly, the
wheel, valve or tire may be damaged. Tire
pressure that is too low may result in a tire
blow-out. There is a risk of an accident.
R
Check the tire for foreign objects.
R
Check whether the wheel is losing air or the
valve is leaking.
If you are unable to rectify the damage, con-
tact a qualified specialist workshop.
G
WARNING
If you fit unsuitable accessories onto tire
valves, the tire valves may be overloaded and
malfunction, which can cause tire pressure
loss. Due to their design, retrofitted tire pres-
sure monitors keep the tire valve open. This
can also result in tire pressure loss. There is a
risk of an accident.
Only screw the standard valve cap or other
valve caps approved by Mercedes-Benz for
your vehicle onto the tire valve.
Use a suitable pressure gauge to check the
tire pressure. The outer appearance of a tire
does not permit any reliable conclusion about
the tire pressure. On vehicles equipped with
the electronic tire pressure monitoring sys-
tem, the tire pressure can be checked using
the on-board computer.
The tire temperature and pressure increase
when the vehicle is in motion. This is depend-
ent on the driving speed and the load.
Therefore, you should only correct tire pres-
sures when the tires are cold.
Tire pressure
367
Wheels and tires
Z
The tires are cold:
R
if the vehicle has been parked without
direct sunlight on the tires for at least three
hours and
R
if the vehicle has been driven for less than
1 mile (1.6 km).
The tire temperature changes depending on
the outside temperature, the vehicle speed
and the tire load. If the tire temperature
changes by 18 (10 †), the tire pressure
changes by approximately 10 kPa (0.1 bar/
1.5 psi). Take this into account when check-
ing the pressure of warm tires. Only correct
the tire pressure if it is too low for the current
operating conditions. If you check the tire
pressure when the tires are warm, the result-
ing value will be higher than if the tires were
cold. This is normal. Do not reduce the tire
pressure to the value specified for cold tires.
The tire pressure would otherwise be too low.
Observe the recommended tire pressures for
cold tires:
R
on the Tire and Loading Information placard
on the B-pillar on the driver's side
R
in the tire pressure table on the inside of the
fuel filler flap
R
on the yellow label on the emergency spare
wheel (depending on the vehicle equip-
ment)
Underinflated or overinflated tires
Underinflated tires
G
WARNING
Tires with pressure that is too low can over-
heat and burst as a consequence. In addition,
they also suffer from excessive and/or irreg-
ular wear, which can severely impair the brak-
ing properties and the driving characteristics.
There is a risk of an accident.
Avoid tire pressures that are too low in all the
tires, including the spare wheel.
Underinflated tires may:
R
overheat, leading to tire defects
R
adversely affect handling
R
wear excessively and/or unevenly
R
have an adverse effect on fuel consumption
Overinflated tires
G
WARNING
Tires with excessively high pressure can burst
because they are damaged more easily by
road debris, potholes etc. In addition, they
also suffer from irregular wear, which can
severely impair the braking properties and the
driving characteristics. There is a risk of an
accident.
Avoid tire pressures that are too high in all the
tires, including the spare wheel.
Overinflated tires may:
R
increase the braking distance
R
adversely affect handling
R
wear excessively and/or unevenly
R
have an adverse effect on ride comfort
R
be more susceptible to damage
Maximum tire pressures
:
Example: maximum permissible tire pres-
sure
Never exceed the maximum permissible tire
inflation pressure. Always observe the rec-
ommended tire pressure for your vehicle
when adjusting the tire pressure
(Y page 366).
368
Tire pressure
Wheels and tires
i
The actual values for tires are vehicle-
specific and may deviate from the values in
the illustration.
Checking the tire pressures
Important safety notes
Observe the notes on tire pressure
(Y page 366).
Information on air pressure for the tires on
your vehicle can be found:
R
on the vehicle's Tire and Loading Informa-
tion placard on the B-pillar
R
on the tire pressure label on the fuel filler
flap
R
in the "Tire pressure" section
Checking tire pressures manually
To determine and set the correct tire pres-
sure, proceed as follows:
X
Remove the valve cap of the tire that is to
be checked.
X
Press the tire pressure gauge securely onto
the valve.
X
Read the tire pressure and compare it with
the recommended value on the Tire and
Loading Information placard (Y page 366).
X
If the tire pressure is too low, increase it to
the recommended value.
X
If the tire pressure is too high, release air by
pressing down the metal pin in the valve.
Use the tip of a pen, for example. Then,
check the tire pressure again using the tire
pressure gauge.
X
Screw the valve cap onto the valve.
X
Repeat these steps for the other tires.
Tire pressure monitor
General notes
If a tire pressure monitor is installed, the vehi-
cle's wheels have sensors that monitor the
tire pressures in all four tires. The tire pres-
sure monitor warns you if the pressure drops
in one or more of the tires. The tire pressure
monitor only functions if the correct sensors
are installed on all wheels.
Information on tire pressures is displayed in
the multifunction display. After a few minutes
of driving, the current tire pressure of each
tire is shown in the ServiceService menu of the mul-
tifunction display, see illustration (example).
Example: current tire pressure display
For information on the message display, refer
to the "Checking the tire pressure electroni-
cally" section (Y page 371).
Important safety notes
G
WARNING
Each tire, including the spare (if provided),
should be checked at least once every two
weeks when cold and inflated to the pressure
recommended by the vehicle manufacturer
on the Tire and Loading Information placard
on the driver's door B-pillar or the tire pres-
sure label on the inside of the fuel filler flap. If
your vehicle has tires of a different size than
the size indicated on the Tire and Loading
Information placard or, if available, the tire
pressure label, you should determine the
proper tire pressure for those tires.
As an added safety feature, your vehicle has
been equipped with a tire pressure monitoring
system (TPMS) that illuminates a low tire pres-
sure telltale when one or more of your tires
are significantly underinflated. Accordingly,
when the low tire pressure telltale lights up,
you should stop and check your tires as soon
as possible, and inflate them to the proper
pressure. Driving on a significantly underin-
Tire pressure
369
Wheels and tires
Z
flated tire causes the tire to overheat and can
lead to tire failure.
Underinflation also reduces fuel efficiency
and tire tread life, and may affect the vehicle's
handling and stopping ability. Please note that
the TPMS is not a substitute for proper tire
maintenance, and it is the driver's responsi-
bility to maintain correct tire pressure, even if
underinflation has not reached the level to
trigger illumination of the TPMS low tire pres-
sure telltale.
Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when
the system is not operating properly. The
TPMS malfunction indicator is combined with
the low tire pressure telltale. When the sys-
tem detects a malfunction, the warning lamp
will flash for approximately a minute and then
remain continuously illuminated. This
sequence will be repeated every time the vehi-
cle is started as long as the malfunction
exists. When the malfunction indicator is illu-
minated, the system may not be able to detect
or signal low tire pressure as intended.
TPMS malfunctions may occur for a variety of
reasons, including the installation of incom-
patible replacement or alternate tires or
wheels on the vehicle that prevent the TPMS
from functioning properly. Always check the
TPMS malfunction telltale after replacing one
or more tires or wheels on your vehicle to
ensure that the replacement or alternate Tires
and wheels allow the TPMS to continue to
function properly.
It is the driver's responsibility to set the tire
pressure to that recommended for cold tires
which is suitable for the operating situation
(Y page 366). Note that the correct tire pres-
sure for the current operating situation must
first be taught-in to the tire pressure monitor.
If there is a substantial loss of pressure, the
warning threshold for the warning message is
aligned to the reference values taught-in.
Restart the tire pressure monitor after adjust-
ing the pressure of the cold tires
(Y page 371). The current pressures are
saved as new reference values. As a result, a
warning message will appear if the tire pres-
sure drops significantly.
The tire pressure monitor does not warn you
of an incorrectly set tire pressure. Observe
the notes on the recommended tire pressure
(Y page 366).
The tire pressure monitor is not able to warn
you of a sudden loss of pressure, e.g. if the
tire is penetrated by a foreign object. In the
event of a sudden loss of pressure, bring the
vehicle to a halt by braking carefully. Avoid
abrupt steering maneuvers.
The tire pressure monitor has a yellow warn-
ing lamp in the instrument cluster for indicat-
ing a pressure loss or malfunction. Whether
the warning lamp flashes or lights up indi-
cates whether a tire pressure is too low or the
tire pressure monitor is malfunctioning:
R
if the warning lamp is lit continuously, the
tire pressure on one or more tires is signif-
icantly too low. The tire pressure monitor is
not malfunctioning.
R
if the warning lamp flashes for around a
minute and then remains lit constantly, the
tire pressure monitor is malfunctioning.
i
In addition to the warning lamp, a mes-
sage appears in the multifunction display.
Further information can be found on
(Y page 274).
If the tire pressure monitor is malfunctioning,
it may take more than ten minutes for the tire
pressure warning lamp to inform you of the
malfunction by flashing for approximately one
minute and then remaining lit. When the mal-
function has been rectified, the tire pressure
warning lamp goes out after a few minutes of
driving.
The tire pressure values indicated by the on-
board computer may differ from those meas-
ured at a gas station with a pressure gauge.
The tire pressures shown by the on-board
computer refer to those measured at sea
level. At high altitudes, the tire pressure val-
ues indicated by a pressure gauge are higher
370
Tire pressure
Wheels and tires
than those shown by the on-board computer.
In this case, do not reduce the tire pressures.
The operation of the tire pressure monitor can
be affected by interference from radio trans-
mitting equipment (e.g. radio headphones,
two-way radios) that may be being operated
in or near the vehicle.
Checking the tire pressure electroni-
cally
X
Make sure that the SmartKey is in position
2 in the ignition lock (Y page 157).
X
Press the = or ; button on the steer-
ing wheel to select the ServiceService menu.
X
Press the 9 or : button to select
Tire PressureTire Pressure.
X
Press the a button.
The current tire pressure of each tire is
shown in the multifunction display.
If the vehicle has been parked for over
20 minutes, the TireTire pressurespressures willwill bebe
displayed after driving a fewdisplayed after driving a few
minutesminutes message appears.
After a teach-in process, the tire pressure
monitor automatically detects new wheels or
new sensors. As long as a clear allocation of
the tire pressure value to the individual
wheels is not possible, the Tire PressureTire Pressure
Monitor ActiveMonitor Active display message is shown
instead of the tire pressure display. The tire
pressures are already being monitored.
i
If an emergency spare wheel is mounted,
the system may continue to show the tire
pressure of the wheel that has been
removed for a few minutes. If this occurs,
note that the value displayed for the posi-
tion where the spare wheel is mounted is
not the same as the current tire pressure of
the emergency spare wheel.
Tire pressure monitor warning mes-
sages
If the tire pressure monitor detects a pressure
loss in one or more tires, a warning message
is shown in the multifunction display and the
yellow tire pressure monitor warning lamp
comes on.
R
If the Correct Tire PressureCorrect Tire Pressure message
appears in the multifunction display, the
tire pressure in at least one tire is too low
and must be corrected at the next oppor-
tunity.
R
If the CheckCheck TiresTires message appears in the
multifunction display, the tire pressure in
one or more tires has dropped significantly
and the tires must be checked.
R
If the Warning Tire MalfunctionWarning Tire Malfunction mes-
sage appears in the multifunction display,
the tire pressure in one or more tires has
dropped suddenly and the tires must be
checked.
Observe the instructions and safety notes in
the display messages in the "Tires" section
(Y page 274).
i
If the wheel positions on the vehicle are
rotated, the tire pressures may be dis-
played for the wrong positions for a short
time. This is rectified after a few minutes of
driving, and the tire pressures are displayed
for the correct positions.
Restarting the tire pressure monitor
When you restart the tire pressure monitor, all
existing warning messages are deleted and
the warning lamps go out. The monitor uses
the currently set tire pressures as the refer-
ence values for monitoring. In most cases, the
tire pressure monitor will automatically
detect the new reference values after you
have changed the tire pressure. However, you
can also define reference values manually as
described here. The tire pressure monitor
then monitors the new tire pressure values.
X
Set the tire pressure to the value recom-
mended for the corresponding driving sit-
Tire pressure
371
Wheels and tires
Z
uation on the Tire and Loading Information
placard on the driver's side
B-pillar (Y page 366).
Additional tire pressure values for different
loads can also be found on the tire pressure
table on the inside of the fuel filler flap
(Y page 366).
X
Make sure that the tire pressure is correct
on all four wheels.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to select the ServiceService menu.
X
Press the 9 or : button to select
Tire PressureTire Pressure.
X
Press the a button.
The multifunction display shows the cur-
rent tire pressure for the individual tires or
the Tire pressures will be dis‐Tire pressures will be dis‐
played after driving a few minutesplayed after driving a few minutes
message.
X
Press the : button.
The Use Current Pressures as NewUse Current Pressures as New
Reference ValuesReference Values message appears in
the multifunction display.
If you wish to confirm the restart:
X
Press the a button.
The Tire Press. Monitor RestartedTire Press. Monitor Restarted
message appears in the multifunction dis-
play.
After driving for a few minutes, the system
checks whether the current tire pressures
are within the specified range. The new tire
pressures are then accepted as reference
values and monitored.
If you wish to cancel the restart:
X
Press the % button.
The tire pressure values stored at the last
restart will continue to be monitored.
Radio type approval for the tire pres-
sure monitor
Country Radio type approval number
USA FCC ID: MRXMW2433A
FCC ID: MRXGG4
FCC ID: MRXMC34MA4
Canada IC: 2546A-MW2433A
IC: 2546A-GG4
IC: 2546A-MC34MA4
Loading the vehicle
Instruction labels for tires and loads
G
WARNING
Overloaded tires can overheat, causing a
blowout. Overloaded tires can also impair the
steering and driving characteristics and lead
to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load
rating must be at least half of the GAWR of
your vehicle. Never overload the tires by
exceeding the maximum load.
Two instruction labels on your vehicle show
the maximum possible load.
(1) The Tire and Loading Information placard
is on the B-pillar on the driver's side. The
Tire and Loading Information placard
shows the maximum permissible number
of occupants and the maximum permis-
sible vehicle load. It also contains details
of the tire sizes and corresponding pres-
sures for tires mounted at the factory.
(2) The vehicle identification plate is on the
B-pillar on the driver's side. The vehicle
identification plate informs you of the
gross vehicle weight rating. It is made up
of the vehicle weight, all vehicle occu-
pants, the fuel and the cargo. You can
also find information about the maximum
gross axle weight rating on the front and
rear axle.
372
Loading the vehicle
Wheels and tires
The maximum gross axle weight rating is
the maximum weight that can be carried
by one axle (front or rear axle). Never
exceed the maximum load or the maxi-
mum gross axle weight rating for the
front or rear axle.
B-pillar (example: Sedan)
:
B-pillar, driver's side
Maximum permissible gross vehicle
weight rating
X
Specification for maximum gross vehicle
weight : is listed in the Tire and Loading
Information placard: "The combined weight
of occupants and cargo should never
exceed XXX kilograms or XXX lbs."
The gross weight of all vehicle occupants,
load and luggage must not exceed the speci-
fied value.
i
The specifications shown on the Tire and
Loading Information placard in the illustra-
tion are examples. The maximum permis-
sible gross vehicle weight rating is vehicle-
specific and may differ from that in the
illustration. You can find the valid maximum
permissible gross vehicle weight rating for
your vehicle on the Tire and Loading Infor-
mation placard.
Number of seats
Maximum number of seats : indicates the
maximum number of occupants allowed to
travel in the vehicle. This information can be
found on the Tire and Loading Information
placard.
i
The specifications shown on the Tire and
Loading Information placard in the illustra-
tion are examples. The number of seats is
vehicle-specific and can differ from the
details shown. The number of seats in your
vehicle can be found on the Tire and Load-
ing Information placard.
Determining the correct load limit
Step-by-step instructions
The following steps have been developed as
required of all manufacturers under Title 49,
Code of U.S. Federal Regulations, Part 575
pursuant to the "National Traffic and Motor
Vehicle Safety Act of 1966".
X
Step 1: Locate the statement "The com-
bined weight of occupants and cargo
should never exceed XXX kg or XXX lbs." on
Loading the vehicle
373
Wheels and tires
Z
your vehicle’s Tire and Loading Information
placard.
X
Step 2: Determine the combined weight of
the driver and passengers that will be riding
in your vehicle.
X
Step 3: Subtract the combined weight of
the driver and passengers from XXX kilo-
grams or XXX lbs.
X
Step 4: The resulting figure equals the
available amount of cargo and luggage load
capacity. For example, if the "XXX" amount
equals 1400 lbs and there will be five
150-lb passengers in your vehicle, the
amount of available cargo and luggage load
capacity is 650 lbs (1400 - 750 (5 x 150) =
650 lbs).
X
Step 5: Determine the combined weight of
luggage and cargo being loaded on the
vehicle. That weight may not safely exceed
the available cargo and luggage load capa-
city calculated in step 4.
374
Loading the vehicle
Wheels and tires
Example: steps 1 to 3
The following table shows examples on how to calculate total and cargo load capacities with
varying seating configurations and number and size of occupants. The following examples use
a load limit of 1500 lbs (680 kg). This is for illustration purposes only. Make sure you are
using the actual load limit for your vehicle stated on your vehicle's Tire and Loading Information
placard (Y page 372).
The greater the combined weight of the occupants, the lower the maximum luggage load.
Step 1
Example 1 Example 2 Example 3
Combined maximum
weight of occupants
and cargo (data from
the Tire and Loading
Information placard)
1500 lbs (680 kg) 1500 lbs (680 kg) 1500 lbs (680 kg)
Step 2
Example 1 Example 2 Example 3
Number of people in
the vehicle (driver
and occupants)
5 3 1
Distribution of the
occupants
Front: 2
Rear: 3
Front: 1
Rear: 2
Front: 1
Weight of the occu-
pants
Occupant 1: 150 lbs
(68 kg)
Occupant 2: 180 lbs
(82 kg)
Occupant 3: 160 lbs
(73 kg)
Occupant 4: 140 lbs
(63 kg)
Occupant 5: 120 lbs
(54 kg)
Occupant 1: 200 lbs
(91 kg)
Occupant 2: 190 lbs
(86 kg)
Occupant 3: 150 lbs
(68 kg)
Occupant 1: 150 lbs
(68 kg)
Gross weight of all
occupants
750 lbs (340 kg) 540 lbs (245 kg) 150 lbs (68 kg)
Loading the vehicle
375
Wheels and tires
Z
Step 3
Example 1 Example 2 Example 3
Permissible load
(maximum gross vehi-
cle weight rating from
the Tire and Loading
Information placard
minus the gross
weight of all occu-
pants)
1500 lbs (680 kg) Ò
750 lbs (340 kg) =
750 lbs (340 kg)
1500 lbs (680 kg) Ò
540 lbs (245 kg)
=960 lbs (435 kg)
1500 lbs (680 kg) Ò
150 lbs (68 kg) =
1350 lbs (612 kg)
Vehicle identification plate
Even if you have calculated the total cargo
carefully, you should still make sure that the
gross vehicle weight rating and the gross axle
weight rating are not exceeded. Details can
be found on the vehicle identification plate on
the B-pillar on the driver's side of the vehicle
(Y page 372).
Permissible Gross Vehicle Weight Rating
(GVWR): the gross weight of the vehicle, all
passengers, load and trailer load/noseweight
(if applicable) must not exceed the permissi-
ble gross vehicle weight.
Gross Axle Weight Rating (GAWR): the
maximum permissible weight that can be car-
ried by one axle (front or rear axle).
To ensure that your vehicle does not exceed
the maximum permissible values (gross vehi-
cle weight and maximum gross axle weight
rating), have your loaded vehicle (including
driver, occupants, cargo, and full trailer load if
applicable) weighed on a suitable vehicle
weighbridge.
All about wheels and tires
Uniform Tire Quality Grading Stand-
ards
Overview of Tire Quality Grading Stand-
ards
Uniform Tire Quality Grading Standards are
U.S. government specifications. Their pur-
pose is to provide drivers with uniform relia-
ble information on tire performance data. Tire
manufacturers have to grade tires using three
performance factors: : tread wear grade, ;
traction grade and = temperature grade.
These regulations do not apply to Canada.
Nevertheless, all tires sold in North America
are provided with the corresponding quality
grading markings on the sidewall of the tire.
Quality grades can be found, where applica-
ble, on the tire sidewall between the tread
shoulder and maximum tire width.
376
All about wheels and tires
Wheels and tires
Example:
R
Treadwear grade: 200
R
Traction grade: AA
R
Temperature grade: A
All passenger car tires must conform to the
statutory safety requirements in addition to
these grades.
i
The actual values for tires are vehicle-
specific and may deviate from the values in
the illustration.
Treadwear
The treadwear grade is a comparative rating
based on the wear rate of the tire when tested
under controlled conditions on a specified
U.S. government course. For example, a tire
graded 150 would wear one and one-half
times as well on the government course as a
tire graded 100.
The relative performance of tires depends
upon the actual conditions of their use, how-
ever, and may depart significantly from the
norm due to variations in driving habits, ser-
vice practices and differences in road char-
acteristics and climate conditions.
Traction
G
WARNING
The traction grade assigned to this tire is
based on straight-ahead braking traction
tests, and does not include acceleration, cor-
nering, hydroplaning, or peak traction char-
acteristics.
!
Avoid wheelspin. This can lead to damage
to the drive train.
The traction grades from highest to lowest
are AA, A, B and C. Those grades represent
the tire's ability to stop on wet pavement as
measured under controlled conditions on
specified government test surfaces of asphalt
and concrete. A tire marked C may have poor
traction performance.
The safe speed on a wet, snow covered or icy
road is always lower than on dry road surfa-
ces.
You should pay special attention to road con-
ditions when temperatures are around freez-
ing point.
Mercedes-Benz recommends a minimum
tread depth of ã in (4 mm) on all four winter
tires. Observe the legally required minimum
tire tread depth (Y page 363). Winter tires can
reduce the braking distance on snow-covered
surfaces in comparison with summer tires.
The braking distance is still much further than
on surfaces that are not icy or covered with
snow. Take appropriate care when driving.
Further information on winter tires (M+S
tires) (Y page 364).
Temperature
G
WARNING
The temperature grade for this tire is estab-
lished for a tire that is properly inflated and
not overloaded. Excessive speed, underinfla-
tion, or excessive loading, either separately or
in combination, can cause excessive heat
build-up and possible tire failure.
The temperature grades are A (the highest), B,
and C. They represent the tire's resistance to
the generation of heat and its ability to dissi-
pate heat when tested under controlled con-
ditions on a specified indoor laboratory test
wheel. Sustained high temperature can cause
the material of the tire to degenerate and
reduce tire life, and excessive temperature
can lead to sudden tire failure. The grade C
corresponds to a level of performance which
all passenger car tires must meet under the
Federal Motor Vehicle Safety Standard No.
109. Grades B and A represent higher levels
of performance on the laboratory test wheel
than the minimum required by law.
All about wheels and tires
377
Wheels and tires
Z
Tire labeling
Overview
:
Uniform Tire Quality Grading Standards
(Y page 382)
;
Department of Transportation, Tire Iden-
tification Number (Y page 381)
=
Maximum load rating (Y page 380)
?
Maximum tire pressures (Y page 368)
A
Manufacturer
B
Tire material (Y page 381)
C
Tire size designation, load-bearing capa-
city and speed rating (Y page 378)
D
Load index (Y page 380)
E
Tire name
The markings described above are on the tire
in addition to the tire name (sales designa-
tion) and the manufacturer's name.
i
Tire data is vehicle-specific and may devi-
ate from the data in the example.
Tire size designation, load-bearing
capacity and speed rating
G
WARNING
Exceeding the stated tire load-bearing capa-
city and the approved maximum speed could
lead to tire damage or the tire bursting. There
is a risk of accident.
Therefore, only use tire types and sizes
approved for your vehicle model. Observe the
tire load rating and speed rating required for
your vehicle.
:
Tire width
;
Nominal aspect ratio in %
=
Tire code
?
Rim diameter
A
Load bearing index
B
Speed rating
General: depending on the manufacturer's
standards, the size imprinted in the tire wall
may not contain any letters or may contain
one letter that precedes the size description.
If there is no letter preceding the size descrip-
tion (as shown above): these are passenger
vehicle tires according to European manufac-
turing standards.
If "P" precedes the size description: these are
passenger vehicle tires according to U.S.
manufacturing standards.
If "LT" precedes the size description: these
are light truck tires according to U.S. manu-
facturing standards.
If "T" precedes the size description: these are
compact emergency spare wheels at high tire
pressure, to be used only temporarily in an
emergency.
Tire width: tire width : shows the nominal
tire width in millimeters.
Aspect ratio: aspect ratio ; is the size ratio
between the tire height and tire width and is
shown in percent. The aspect ratio is calcu-
378
All about wheels and tires
Wheels and tires
lated by dividing the tire width by the tire
height.
Tire code: tire code = specifies the tire type.
"R" represents radial tires; "D" represents
diagonal tires; "B" represents diagonal radial
tires.
Optionally, tires with a maximum speed of
over 149 mph (240 km/h) may have "ZR" in
the size description, depending on the man-
ufacturer (e.g. 245/40 ZR 18).
Rim diameter: rim diameter ? is the diam-
eter of the bead seat, not the diameter of the
rim flange. The rim diameter is specified in
inches (in).
Load-bearing index: load-bearing index A
is a numerical code that specifies the maxi-
mum load-bearing capacity of a tire.
Do not overload the tires by exceeding the
specified load limit. The maximum permissi-
ble load can be found on the vehicle's Tire and
Loading Information placard on the B-pillar on
the driver's side (Y page 372).
Example:
Load-bearing index 91 indicates a maximum
load of 1,356 lb (615 kg) that the tires can
bear. For further information on the maximum
tire load in kilograms and lbs, see
(Y page 380).
For further information on the load bearing
index, see "Load index" (Y page 380).
Speed rating: speed rating B specifies the
approved maximum speed of the tire.
i
Tire data is vehicle-specific and may devi-
ate from the data in the example.
Regardless of the speed rating, always
observe the speed limits. Drive carefully and
adapt your driving style to the traffic condi-
tions.
Summer tires
Index Speed rating
Q up to 100 mph (160 km/h)
R up to 106 mph (170 km/h)
Index Speed rating
S up to 112 mph (180 km/h)
T up to 118 mph (190 km/h)
H up to 130 mph (210 km/h)
V up to 149 mph (240 km/h)
W up to 168 mph (270 km/h)
Y up to 186 mph (300 km/h)
ZR...Y up to 186 mph (300 km/h)
ZR...(..Y) over 186 mph (300 km/h)
ZR over 149 mph (240 km/h)
R
Optionally, tires with a maximum speed of
over 149 mph (240 km/h) may have "ZR" in
the size description, depending on the
manufacturer (e.g. 245/40 ZR18).
The service specification is made up of
load-bearing index A and speed rating B.
R
If the size description of your tire includes
"ZR" and there are no service specifica-
tions, ask the tire manufacturer in order to
find out the maximum speed.
If a service specification is available, the
maximum speed is limited according to the
speed rating in the service specification.
Example: 245/40 ZR18 97 Y. In this exam-
ple, "97 Y" is the service specification. The
letter "Y" represents the speed rating. The
maximum speed of the tire is limited to
186 mph (300 km/h).
R
The size description for all tires with maxi-
mum speeds of over 186 mph (300 km/h)
must include "ZR" and the service specifi-
cation must be given in parentheses. Exam-
ple: 275/40 ZR 18 (99 Y). Speed rating
"(Y)" indicates that the maximum speed of
the tire is over 186 mph (300 km/h). Ask
the tire manufacturer about the maximum
speed.
All about wheels and tires
379
Wheels and tires
Z
All-weather tires and winter tires
Index Speed rating
Q M+S
1
up to 100 mph (160 km/h)
T M+S
1
up to 118 mph (190 km/h)
H M+S
1
up to 130 mph (210 km/h)
V M+S
1
up to 149 mph (240 km/h)
i
Not all tires with the M+S marking provide
the driving characteristics of winter tires. In
addition to the M+S marking, winter tires
also have the i snowflake symbol on
the tire wall. Tires with this marking fulfill
the requirements of the Rubber Manufac-
turers Association (RMA) and the Rubber
Association of Canada (RAC) regarding the
tire traction on snow. They have been espe-
cially developed for driving on snow.
An electronic speed limiter prevents your
vehicle from exceeding the following speeds:
R
All vehicles (except AMG vehicles):
130 mph (210 km/h)
R
AMG vehicles: 155 mph (250 km/h)
R
AMG vehicles with Performance Package
(Wagon): 174 mph (280 km/h)
R
AMG vehicles with Performance Package
(Sedan): 186 mph (300 km/h)
The speed rating of tires mounted at the fac-
tory may be higher than the maximum speed
that the electronic speed limiter permits.
Make sure that your tires have the required
speed rating, e.g. when buying new tires. The
required speed rating for your vehicle can be
found in the "Tires" section (Y page 389).
Further information about reading tire data
can be obtained from any qualified specialist
workshop.
Load index
In addition to the load bearing index, load
index : may be imprinted after the letters
that identify speed index B on the sidewall of
the tire (Y page 378).
R
If no specification is given: no text (as in the
example above), represents a standard
load (SL) tire
R
XL or Extra Load: represents a reinforced
tire
R
Light Load: represents a light load tire
R
C, D, E: represents a load range that
depends on the maximum load that the tire
can carry at a certain pressure
i
Tire data is vehicle-specific and may devi-
ate from the data in the example.
Maximum load rating
Maximum tire load : is the maximum per-
missible weight for which the tire is approved.
Do not overload the tires by exceeding the
specified load limit. The maximum permissi-
1
Or M+S i for winter tires.
380
All about wheels and tires
Wheels and tires
ble load can be found on the vehicle's Tire and
Loading Information placard on the B-pillar on
the driver's side (Y page 372).
i
The actual values for tires are vehicle-
specific and may deviate from the values in
the illustration.
DOT, Tire Identification Number (TIN)
US tire regulations stipulate that every tire
manufacturer or retreader must imprint a TIN
in or on the sidewall of each tire produced.
The TIN is a unique identification number. The
TIN enables the tire manufacturers or retread-
ers to inform purchasers of recalls and other
safety-relevant matters. It makes it possible
for the purchaser to easily identify the affec-
ted tires.
The TIN is made up of manufacturer identifi-
cation code ;, tire size =, tire type code ?
and manufacturing date A.
DOT (Department of Transportation): tire
symbol : marks that the tire complies with
the requirements of the U.S. Department of
Transportation.
Manufacturer identification code: manu-
facturer identification code ; provides
details on the tire manufacturer. New tires
have a code with two symbols. Retreaded
tires have a code with four symbols.
For further information about retreaded tires,
see (Y page 362).
Tire size: identifier = describes the tire size.
Tire type code: tire type code ? can be used
by the manufacturer as a code to describe
specific characteristics of the tire.
Date of manufacture: date of manufacture
A provides information about the age of a
tire. The first and second positions represent
the week of manufacture, starting with "01"
for the first calendar week. Positions three
and four represent the year of manufacture.
For example, a tire that is marked with
"3208", was manufactured in week 32 in
2008.
i
Tire data is vehicle-specific and may devi-
ate from the data in the example.
Tire characteristics
This information describes the type of tire
cord and the number of layers in sidewall :
and under tire tread ;.
i
Tire data is vehicle-specific and may devi-
ate from the data in the example.
Definition of terms for tires and loading
Tire ply composition and material used
Describes the number of plies or the number
of layers of rubber-coated fabric in the tire
tread and sidewall. These are made of steel,
nylon, polyester and other materials.
Bar
Metric unit for tire pressure. 14.5038 pounds
per square inch (psi) and 100 kilopascals
(kPa) are the equivalent of 1 bar.
All about wheels and tires
381
Wheels and tires
Z
DOT (Department of Transportation)
DOT marked tires fulfill the requirements of
the United States Department of Transporta-
tion.
Normal occupant weight
The number of occupants for which the vehi-
cle is designed multiplied by 68 kilograms
(150 lb).
Uniform Tire Quality Grading Standards
A uniform standard to grade the quality of
tires with regards to tread quality, tire traction
and temperature characteristics. Ratings are
determined by tire manufacturers using U.S.
government testing procedures. The ratings
are molded into the sidewall of the tire.
Recommended tire pressure
The recommended tire pressure applies to
the tires mounted at the factory.
The Tire and Loading Information placard con-
tains the recommended tire pressures for
cold tires on a fully loaded vehicle and for the
maximum permissible vehicle speed.
The tire pressure table contains the recom-
mended pressures for cold tires for various
operating conditions, i.e. differing load and
speed conditions.
Increased vehicle weight due to optional
equipment
This is the combined weight of all standard
and optional equipment available for the vehi-
cle, regardless of whether it is actually instal-
led on the vehicle or not.
Rim
This is the part of the wheel on which the tire
is mounted.
GAWR (Gross Axle Weight Rating)
The GAWR is the maximum gross axle weight
rating. The actual load on an axle must never
exceed the gross axle weight rating. The
gross axle weight rating can be found on the
vehicle identification plate on the B-pillar on
the driver's side.
Speed rating
The speed rating is part of the tire identifica-
tion. It specifies the speed range for which the
tire is approved.
GVW (Gross Vehicle Weight)
The gross vehicle weight includes the weight
of the vehicle including fuel, tools, the spare
wheel, accessories installed, occupants, lug-
gage and the drawbar noseweight, if applica-
ble. The gross vehicle weight must not exceed
the gross vehicle weight rating GVWR as
specified on the vehicle identification plate on
the B-pillar on the driver's side.
GVWR (Gross Vehicle Weight Rating)
The GVWR is the maximum permissible gross
weight of a fully loaded vehicle (the weight of
the vehicle including all accessories, occu-
pants, fuel, luggage and the drawbar nose-
weight, if applicable). The gross vehicle
weight rating is specified on the vehicle iden-
tification plate on the B-pillar on the driver's
side.
Maximum loaded vehicle weight
The maximum weight is the sum of:
R
the curb weight of the vehicle
R
the weight of the accessories
R
the load limit
R
the weight of the factory installed optional
equipment
Kilopascal (kPa)
Metric unit for tire pressure. 6.9 kPa corre-
sponds to 1 psi. Another unit for tire pressure
is bar. There are 100 kilopascals (kPa) to
1 bar.
Load index
In addition to the load-bearing index, the load
index may also be imprinted on the sidewall of
the tire. This specifies the load-bearing capa-
city more precisely.
382
All about wheels and tires
Wheels and tires
Curb weight
The weight of a vehicle with standard equip-
ment including the maximum capacity of fuel,
oil and coolant. It also includes the air-condi-
tioning system and optional equipment if
these are installed in the vehicle, but does not
include passengers or luggage.
Maximum load rating
The maximum tire load is the maximum per-
missible weight in kilograms or lbs for which a
tire is approved.
Maximum permissible tire pressure
Maximum permissible tire pressure for one
tire.
Maximum load on one tire
Maximum load on one tire. This is calculated
by dividing the maximum axle load of one axle
by two.
PSI (pounds per square inch)
A standard unit of measure for tire pressure.
Aspect ratio
Relationship between tire height and tire
width in percent.
Tire pressure
This is pressure inside the tire applying an
outward force to each square inch of the tire's
surface. The tire pressure is specified in
pounds per square inch (psi), in kilopascal
(kPa) or in bar. The tire pressure should only
be corrected when the tires are cold.
Cold tire pressure
The tires are cold:
R
if the vehicle has been parked without
direct sunlight on the tires for at least three
hours and
R
if the vehicle has been driven for less than
1 mile (1.6 km).
Tread
The part of the tire that comes into contact
with the road.
Bead
The tire bead ensures that the tire sits
securely on the wheel. There are several steel
wires in the bead to prevent the tire from
coming loose from the wheel rim.
Sidewall
The part of the tire between the tread and the
bead.
Weight of optional extras
The combined weight of those optional extras
that weigh more than the replaced standard
parts and more than 2.3 kilograms (5 lbs).
These optional extras, such as high-perform-
ance brakes, level control, a roof rack or a
high-performance battery, are not included in
the curb weight and the weight of the acces-
sories.
TIN (Tire Identification Number)
This is a unique identifier which can be used
by a tire manufacturer to identify tires, for
example for a product recall, and thus identify
the purchasers. The TIN is made up of the
manufacturer's identity code, tire size, tire
type code and the manufacturing date.
Load bearing index
The load bearing index (also load index) is a
code that contains the maximum load bearing
capacity of a tire.
Traction
Traction is the result of friction between the
tires and the road surface.
Treadwear indicators
Narrow bars (tread wear bars) that are dis-
tributed over the tire tread. If the tire tread is
level with the bars, the wear limit of á in
(1.6 mm) has been reached.
All about wheels and tires
383
Wheels and tires
Z
Occupant distribution
The distribution of occupants in a vehicle at
their designated seating positions.
Total load limit
Rated cargo and luggage load plus
68 kilograms (150 lb) multiplied by the num-
ber of seats in the vehicle.
Changing a wheel
Flat tire
The "Breakdown assistance" section
(Y page 345) contains information and notes
on how to deal with a flat tire. Information on
driving with MOExtended tires in the event of
a flat tire can be found under "MOExtended
tires (tires with run-flat characteristics"
(Y page 345).
Vehicle with emergency spare wheel: in
the event of a flat tire, the emergency spare
wheel is mounted as described under "Mount-
ing a wheel" (Y page 385).
Rotating the wheels
G
WARNING
Interchanging the front and rear wheels may
severely impair the driving characteristics if
the wheels or tires have different dimensions.
The wheel brakes or suspension components
may also be damaged. There is a risk of acci-
dent.
Rotate front and rear wheels only if the wheels
and tires are of the same dimensions.
!
On vehicles equipped with a tire pressure
monitor, electronic components are loca-
ted in the wheel.
Tire-mounting tools should not be used
near the valve. This could damage the elec-
tronic components.
Only have tires changed at a qualified spe-
cialist workshop.
Always observe the instructions and safety
notes in the "Mounting a wheel" section
(Y page 385).
The wear patterns on the front and rear tires
differ, depending on the operating conditions.
Rotate the wheels before a clear wear pattern
has formed on the tires. Front tires typically
wear more on the shoulders and the rear tires
in the center.
If your vehicle's tire configuration allows, you
can rotate the wheels according to the inter-
vals in the tire manufacturer's warranty book
in your vehicle documents. If no warranty
book is available, the tires should be rotated
every 3,000 to 6,000 miles (5,000 to
10,000 km), or earlier if tire wear requires. Do
not change the direction of wheel rotation.
Clean the contact surfaces of the wheel and
the brake disc thoroughly every time a wheel
is rotated. Check the tire pressure and reac-
tivate the tire pressure monitor if necessary
(Y page 371).
Direction of rotation
Tires with a specified direction of rotation
have additional benefits, e.g. if there is a risk
of hydroplaning. You will only gain these ben-
efits if the correct direction of rotation is
maintained.
An arrow on the sidewall of the tire indicates
its correct direction of rotation.
Storing wheels
Store wheels that are not being used in a cool,
dry and preferably dark place. Protect the
tires from oil, grease, gasoline and diesel.
Cleaning the wheels
G
WARNING
The water jet from a circular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
384
Changing a wheel
Wheels and tires
nents damaged in this way may fail unexpect-
edly. There is a risk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged
tires or chassis components replaced imme-
diately.
Mounting a wheel
Preparing the vehicle
X
Stop the vehicle on solid, non-slippery and
level ground.
X
Apply the parking brake.
X
Bring the front wheels into the straight-
ahead position.
X
Shift the transmission to position P.
X
Vehicles with AIRMATIC: make sure that
"normal" level is selected (Y page 202).
X
Switch off the engine.
X
Vehicles without KEYLESS-GO: remove
the SmartKey from the ignition lock.
X
Vehicles with KEYLESS-GO: open the
driver's door.
The on-board electronics now have status
0. This is the same as the SmartKey having
been removed.
X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock
(Y page 158).
X
If included in the vehicle equipment,
remove the tire-change tool kit from the
vehicle (Y page 344).
X
Secure the vehicle to prevent it from rolling
away.
Securing the vehicle to prevent it from
rolling away
If your vehicle is equipped with a wheel chock,
it can be found in the tire-change tool kit
(Y page 344).
The folding wheel chock is an additional
safety measure to prevent the vehicle from
rolling away, for example when changing a
wheel.
X
Fold both plates upwards :.
X
Fold out lower plate ;.
X
Guide the lugs on the lower plate fully into
the openings in base plate =.
Securing the vehicle on level ground (example:
Sedan)
X
On level ground: place chocks or other
suitable items under the front and rear of
the wheel that is diagonally opposite the
wheel you wish to change.
Changing a wheel
385
Wheels and tires
Z
Securing the vehicle on slight downhill gradients
(example: Sedan)
X
On light downhill gradients: place
chocks or other suitable items in front of
the wheels of the front and rear axle.
Raising the vehicle
G
WARNING
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip over with the vehicle raised.
There is a risk of injury.
Only position the jack at the appropriate jack-
ing point of the vehicle. The base of the jack
must be positioned vertically, directly under
the jacking point of the vehicle.
!
The jack is designed exclusively for jack-
ing up the vehicle at the jacking points.
Otherwise, your vehicle could be damaged.
Observe the following when raising the vehi-
cle:
R
To raise the vehicle, only use the vehicle-
specific jack that has been tested and
approved by Mercedes-Benz. If used incor-
rectly, the jack could tip over with the vehi-
cle raised.
R
The jack is designed only to raise and hold
the vehicle for a short time while a wheel
is being changed. It is not suited for per-
forming maintenance work under the vehi-
cle.
R
Avoid changing the wheel on uphill and
downhill slopes.
R
Before raising the vehicle, secure it from
rolling away by applying the parking brake
and inserting wheel chocks. Never disen-
gage the parking brake while the vehicle is
raised.
R
The jack must be placed on a firm, flat and
non-slip surface. On a loose surface, a
large, flat, load-bearing underlay must be
used. On a slippery surface, a non-slip
underlay must be used, e.g. rubber mats.
R
Do not use wooden blocks or similar
objects as a jack underlay. Otherwise, the
jack will not be able to achieve its load-
bearing capacity due to the restricted
height.
R
Make sure that the distance between the
underside of the tires and the ground does
not exceed 1.2 in (3 cm).
R
Never place your hands and feet under the
raised vehicle.
R
Do not lie under the vehicle.
R
Do not start the engine when the vehicle is
raised.
R
Do not open or close a door or the trunk lid/
tailgate when the vehicle is raised.
R
Make sure that no persons are present in
the vehicle when the vehicle is raised.
AMG vehicles with Performance Studio
equipment: the wheel bolts are covered by a
hub cap. Before you can unscrew the wheel
bolts, you must remove the hub cap.
386
Changing a wheel
Wheels and tires
X
To remove: turn the center cover of hub
cap : counter-clockwise and remove.
X
To install: before installing, ensure that
hub cap : is in the open position. To do so,
turn the center cover counter-clockwise.
X
Put hub cap : in position and turn the
center cover clockwise until you feel and
hear hub cap : engage.
X
Make sure that hub cap : is installed
securely.
X
Using lug wrench ;, loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
Jacking points (example: Sedan)
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
AMG vehicles and vehicles with AMG
equipment: to protect the vehicle body, the
vehicle has covers next to the jacking points
on the outer sills.
Cover, front (example: vehicles with AMG Sports
package)
X
AMG vehicles and vehicles with AMG
equipment: fold cover = upwards.
X
Position jack A at jacking point ?.
Example
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn crank B clockwise until jack A sits
completely on jacking point ? and the
base of the jack lies evenly on the ground.
X
Turn crank B until the tire is raised a max-
imum of 1.2 in (3 cm) from the ground.
Changing a wheel
387
Wheels and tires
Z
Removing a wheel
!
AMG vehicles: during removal and repo-
sitioning of the wheel, the wheel rim can
strike the ceramic-brake disc and damage
it. Therefore, you should proceed carefully
and get a second person assist to you.
Alternatively, you can use a second align-
ment bolt.
!
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
X
Unscrew the uppermost wheel bolt com-
pletely.
X
Screw alignment bolt : into the thread
instead of the wheel bolt.
X
Unscrew the remaining wheel bolts fully.
X
Remove the wheel.
Mounting a new wheel
G
WARNING
Oiled or greased wheel bolts or damaged
wheel bolts/hub threads can cause the wheel
bolts to come loose. As a result, you could
lose a wheel while driving. There is a risk of
accident.
Never oil or grease wheel bolts. In the event of
damage to the threads, contact a qualified
specialist workshop immediately. Have the
damaged wheel bolts or hub threads
replaced/renewed. Do not continue driving.
G
WARNING
If you tighten the wheel bolts or wheel nuts
when the vehicle is raised, the jack could tip
over. There is a risk of injury.
Only tighten the wheel bolts or wheel nuts
when the vehicle is on the ground.
Always pay attention to the instructions and
safety notes in the "Changing a wheel" sec-
tion (Y page 384).
Only use wheel bolts that have been designed
for the wheel and the vehicle. For safety rea-
sons, Mercedes-Benz recommends that you
only use wheel bolts which have been
approved for Mercedes-Benz vehicles and the
respective wheel.
!
AMG vehicles: during removal and repo-
sitioning of the wheel, the wheel rim can
strike the ceramic-brake disc and damage
it. Therefore, you should proceed carefully
and get a second person assist to you.
Alternatively, you can use a second align-
ment bolt.
!
To prevent damage to the paintwork, hold
the wheel securely against the wheel hub
while screwing in the first wheel bolt.
Positioning a wheel (example: vehicle with an
emergency spare wheel)
X
Clean the wheel and wheel hub contact
surfaces.
X
Slide the wheel to be mounted onto the
alignment bolt and push it on.
X
Tighten the wheel bolts until they are fin-
ger-tight.
388
Changing a wheel
Wheels and tires
X
Unscrew the alignment bolt.
X
Tighten the last wheel bolt until it is finger-
tight.
X
Vehicles with a collapsible spare wheel:
inflate the collapsible spare wheel
(Y page 405).
Only then lower the vehicle.
Lowering the vehicle
G
WARNING
The wheels could work loose if the wheel nuts
and bolts are not tightened to the specified
tightening torque. There is a risk of accident.
Have the tightening torque immediately
checked at a qualified specialist workshop
after a wheel is changed.
!
Vehicles with a collapsible spare
wheel: before lowering the vehicle, inflate
the collapsible spare wheel with the tire
inflation compressor. The wheel rim could
otherwise be damaged.
Tightening the wheel nuts (example: vehicle with
an emergency spare wheel)
X
Turn the crank of the jack counter-clock-
wise until the vehicle is once again standing
firmly on the ground.
X
Place the jack to one side.
X
Tighten the wheel bolts evenly in a cross-
wise pattern in the sequence indicated (:
to A). The specified tightening torque is
96 lb-ft (130 Nm).
X
Turn the jack back to its initial position.
X
Stow the jack and the rest of the vehicle
tools in the trunk/cargo compartment
again.
X
AMG vehicles and vehicles with AMG
equipment: insert the cover into the outer
sill.
X
Check the tire pressure of the newly moun-
ted wheel and adjust it if necessary.
Observe the recommended tire pressure
(Y page 366).
i
All wheels mounted must be equipped
with functioning sensors.
Wheel and tire combinations
General notes
!
For safety reasons, Mercedes-Benz rec-
ommends that you only use tires and
wheels which have been approved by
Mercedes-Benz specifically for your vehi-
cle.
These tires have been specially adapted for
use with the control systems, such as ABS
or ESP
®
, and are marked as follows:
R
MO = Mercedes-Benz Original
R
MOE = Mercedes-Benz Original Extended
(tires featuring run-flat characteristics)
R
MO1 = Mercedes-Benz Original (only cer-
tain AMG tires)
Mercedes-Benz Original Extended tires
may only be used on wheels that have been
specifically approved by Mercedes-Benz.
Only use tires, wheels or accessories tes-
ted and approved by Mercedes-Benz. Cer-
tain characteristics, e.g. handling, vehicle
noise emissions or fuel consumption, may
otherwise be adversely affected. In addi-
tion, when driving with a load, tire dimen-
sion variations could cause the tires to
come into contact with the bodywork and
axle components. This could result in dam-
age to the tires or the vehicle.
Mercedes-Benz accepts no liability for
damage resulting from the use of tires,
Wheel and tire combinations
389
Wheels and tires
Z
wheels or accessories other than those tes-
ted and approved.
Information on tires, wheels and approved
combinations can be obtained from any
qualified specialist workshop.
Overview of abbreviations used in the follow-
ing tire tables:
R
BA: both axles
R
FA: front axle
R
RA: rear axle
The recommended pressures for various
operating conditions can be found:
R
on the Tire and Loading Information placard
with the recommended tire pressures on
the B-pillar on the driver's side
R
in the tire pressure table on the inside of the
fuel filler flap
Observe the notes on recommended tire
pressures under various operating conditions
(Y page 366).
Check tire pressures regularly, and only when
the tires are cold. Comply with the mainte-
nance recommendations of the tire manufac-
turer in the vehicle document wallet.
Notes on the vehicle equipment always
equip the vehicle with:
R
tires of the same size on a given axle (left/
right)
R
the same type of tires at a given time (sum-
mer tires, winter tires, MOExtended tires)
i
Vehicles equipped with MOExtended tires
are not equipped with a TIREFIT kit at the
factory. It is therefore recommended that
you additionally equip your vehicle with a
TIREFIT kit if you mount tires that do not
feature run-flat properties, e.g. winter tires.
A TIREFIT kit may be obtained from a quali-
fied specialist workshop.
i
Not all wheel and tire combinations are
available at the factory for all countries.
i
On the following pages, you can find infor-
mation on approved wheel rims and tire
sizes for equipping your vehicle with winter
tires. Winter tires are not available at the
factory as standard equipment or optional
extras.
If you would like to equip your vehicle with
approved winter tires, you may also, in cer-
tain circumstances, require rims of the
appropriate size. The size of the approved
winter tires may deviate from that of the
standard tires. This is dependent on the
model and the equipment installed at the
factory.
The tires and wheel rims, as well as further
information, can be obtained at a qualified
specialist workshop.
390
Wheel and tire combinations
Wheels and tires
Tires
E 250 BlueTEC
Summer tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 245/40 R18 97 Y XL
RA: 265/35 R18 97 Y XL
2
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 245/40 R18 97 V XL M+S
RA: 265/40 R18 97 V XL M+S
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
2
Use of snow chains not permitted. Observe the notes in the "Snow chains" section.
3
Available as MOExtended tires.
Wheel and tire combinations
391
Wheels and tires
Z
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
E 250 BlueTEC 4MATIC
Summer tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
3
Available as MOExtended tires.
392
Wheel and tire combinations
Wheels and tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
E 300 4MATIC
Summer tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
3
Available as MOExtended tires.
Wheel and tire combinations
393
Wheels and tires
Z
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
E 350
Summer tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 245/40 R18 97 Y XL
RA: 265/35 R18 97 Y XL
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
3
Available as MOExtended tires.
394
Wheel and tire combinations
Wheels and tires
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 245/40 R18 97 V XL M+S
RA: 265/40 R18 97 V XL M+S
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
3
Available as MOExtended tires.
Wheel and tire combinations
395
Wheels and tires
Z
E 350 4MATIC
Summer tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL
4
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3, 4
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3, 4
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/40 R18 97 Y XL M+S
5
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S i
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
4
For Sedan only.
3
Available as MOExtended tires.
5
Only for Wagon.
396
Wheel and tire combinations
Wheels and tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si
4
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
E 400
Summer tires
R17
Tires Alloy wheels
BA: 245/45 R17 95 W
4
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 Y XL
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 W
4
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 Y XL
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL
5
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 245/40 R18 97 Y XL
RA: 265/35 R18 97 Y XL
2
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
4
For Sedan only.
3
Available as MOExtended tires.
5
Only for Wagon.
2
Use of snow chains not permitted. Observe the notes in the "Snow chains" section.
Wheel and tire combinations
397
Wheels and tires
Z
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 95 H M+Si
4
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+Si
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H M+Si
4
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+Si
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
3
Available as MOExtended tires.
4
For Sedan only.
398
Wheel and tire combinations
Wheels and tires
E 400 4MATIC
Summer tires
R17
Tires Alloy wheels
BA: 245/45 R17 95 W
5
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 Y XL
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 W
5
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 Y XL
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
All-weather tires
R17
Tires Alloy wheels
BA: 245/45 R17 99 H XL M+S BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3, 4
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+S BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H XL M+S
3, 4
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
5
Only for Wagon.
3
Available as MOExtended tires.
4
For Sedan only.
Wheel and tire combinations
399
Wheels and tires
Z
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/40 R18 97 Y XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires Alloy wheels
BA: 245/45 R17 95 H M+Si
4
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+Si
3
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 95 H M+Si
4
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL M+Si
3
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires Alloy wheels
BA: 245/40 R18 97 H XL M+Si BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
E 550 4MATIC
Summer tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 Y XL BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
4
For Sedan only.
3
Available as MOExtended tires.
400
Wheel and tire combinations
Wheels and tires
All-weather tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R18
Tires Alloy wheels
BA: 245/40 R18 97 V XL M+S i BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
E 63 AMG
Summer tires
R18
Tires Alloy wheels
FA: 255/40 ZR18 (99 Y) XL MO1
6
RA: 285/35 ZR18 (101 Y) XL MO1
2, 6
FA: 9.0 J x 18 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 18 H2
Wheel offset: 2.05 in (52 mm)
R19
Tires Alloy wheels
FA: 255/35 ZR19 (96 Y) XL
7
RA: 285/30 ZR19 (98 Y) XL
2, 7
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
6
Not in connection with a ceramic brake system.
2
Use of snow chains not permitted. Observe the notes in the "Snow chains" section.
7
Observe notes on "Large wheels" under "General notes" in "Wheel/tire combinations".
Wheel and tire combinations
401
Wheels and tires
Z
Winter tires
R18
Tires Alloy wheels
FA: 255/40 R18 99 V XL M+Si
6
RA: 255/40 R18 99 V XL M+Si
6
FA: 9.0 J x 18 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 18 H2
Wheel offset: 2.05 in (52 mm)
R19
Tires Alloy wheels
FA: 255/35 R19 96 V XL M+Si
7, 8
RA: 255/35 R19 96 V XL M+Si
7, 8, 9
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
FA: 255/35 R19 96 V XL M+S i
7
RA: 285/30 R19 98 V XL M+S i
2, 7
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
E 63 AMG S-MODEL 4MATIC
Summer tires
R19
Tires Alloy wheels
FA: 255/35 ZR19 (96 Y) XL
7
RA: 285/30 ZR19 (98 Y) XL
2, 7
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
6
Not in connection with a ceramic brake system.
7
Observe notes on "Large wheels" under "General notes" in "Wheel/tire combinations".
8
Wagon: maximum permissible speed 220 km/h.
9
Only fine-link snow chains are permitted.
2
Use of snow chains not permitted. Observe the notes in the "Snow chains" section.
402
Wheel and tire combinations
Wheels and tires
Winter tires
R19
Tires Alloy wheels
FA: 255/35 R19 96 V XL M+Si
7, 10
RA: 255/35 R19 96 V XL M+S i
7, 9, 10
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
FA: 255/35 R19 96 V XL M+S i
7
RA: 285/30 R19 98 V XL M+S i
2, 7
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
E 63 AMG 4MATIC
Summer tires
R19
Tires Alloy wheels
FA: 255/35 ZR19 (96 Y) XL
7
RA: 285/30 ZR19 (98 Y) XL
2, 7
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
Winter tires
R19
Tires Alloy wheels
FA: 255/35 R19 96 V XL M+S i
7, 10
RA: 255/35 R19 96 V XL M+S i
7, 9, 10
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
FA: 255/35 R19 96 V XL M+S i
7
RA: 285/30 R19 98 V XL M+S i
2, 7
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
7
Observe notes on "Large wheels" under "General notes" in "Wheel/tire combinations".
10
Wagon: maximum permissible speed 220 km/h.
9
Only fine-link snow chains are permitted.
2
Use of snow chains not permitted. Observe the notes in the "Snow chains" section.
Wheel and tire combinations
403
Wheels and tires
Z
Emergency spare wheel
Important safety notes
G
WARNING
The wheel or tire size as well as the tire type of
the spare wheel or emergency spare wheel
and the wheel to be replaced may differ.
Mounting an emergency spare wheel may
severely impair the driving characteristics.
There is a risk of an accident.
To avoid hazardous situations:
R
adapt your driving style accordingly and
drive carefully.
R
never mount more than one spare wheel or
emergency spare wheel that differs in size.
R
only use a spare wheel or emergency spare
wheel of a different size briefly.
R
do not switch ESP
®
off.
R
have a spare wheel or emergency spare
wheel of a different size replaced at the
nearest qualified specialist workshop.
Observe that the wheel and tire dimensions
as well as the tire type must be correct.
When using an emergency spare wheel or
spare wheel of a different size, you must not
exceed the maximum speed of 50 mph
(80 km/h).
Snow chains must not be mounted on emer-
gency spare wheels.
General notes
You should regularly check the pressure of
the emergency spare wheel, particularly prior
to long trips, and correct the pressure as nec-
essary (Y page 366). The value on the wheel is
valid. In addition, the emergency spare wheel
tire pressure can be found under "Technical
data" (Y page 407).
An emergency spare wheel may also be
mounted against the direction of rotation.
Observe the time restriction on use as well as
the speed limitation specified on the emer-
gency spare wheel.
Replace the tires after six years at the latest,
regardless of wear. This also applies to the
emergency spare wheel.
i
When you are driving with the emergency
spare wheel mounted, the tire pressure
monitor cannot function reliably. Only
restart the tire pressure monitor when the
defective wheel has been replaced with a
new wheel.
If an emergency spare wheel is mounted,
the system may continue to show the tire
pressure of the wheel that has been
removed for a few minutes. The value dis-
played for the mounted emergency spare
wheel is not the same as the current tire
pressure of the emergency spare wheel.
"Minispare" emergency spare wheel/
collapsible spare wheel
Opening the stowage well
Sedan: the emergency spare wheel can be
found in the stowage well under the trunk
floor.
X
Lift the trunk floor upwards (Y page 306).
Wagon: the emergency spare wheel is loca-
ted in the stowage well under the cargo com-
partment floor.
X
Lift the cargo compartment floor up.
Removing the emergency spare wheel
(Sedan)
Example: Sedan
404
Emergency spare wheel
Wheels and tires
X
Remove vehicle tool kit tray :.
X
Turn stowage tray ; counter-clockwise
and remove it.
X
Remove "Minispare" emergency spare
wheel =.
Removing the emergency spare wheel
(Wagon)
Example: emergency spare wheel
X
Remove vehicle tool kit tray : by
recess ;.
X
Remove "Minispare" emergency spare
wheel =.
Removing the emergency spare wheel
(AMG vehicles)
X
Reach into cutout : in the tool holder and
lift it up.
X
Remove collapsible spare wheel ;.
Always observe the instructions and safety
notes in the "Mounting a wheel" section
(Y page 385).
Stowing a used collapsible spare
wheel
!
Only place the collapsible spare wheel in
the vehicle when it is dry. Otherwise, mois-
ture may get into the vehicle.
Take the following steps to stow a used col-
lapsible spare wheel. It will not otherwise fit
into the spare wheel well. Mercedes-Benz
recommends that you have this work per-
formed at a qualified specialist workshop, e.g.
at an authorized Mercedes-Benz Center.
X
Unscrew the valve cap from the valve.
X
Use the back of the valve cap to unscrew
the valve insert from the valve and release
the air.
i
Fully deflating the tires can take a few
minutes.
X
Screw the valve insert back into the valve.
X
Screw the valve cap back on.
X
Remove the protective sheet from the vehi-
cle tool kit and pull it over the collapsible
spare wheel.
X
Stow the collapsible spare wheel in the
emergency spare wheel well under the
trunk/cargo compartment.
Inflating the collapsible spare wheel
!
Inflate the collapsible spare wheel using
the tire inflation compressor before lower-
ing the vehicle. The wheel rim could other-
wise be damaged.
!
Do not operate the tire inflation compres-
sor for longer than eight minutes at a time
without a break. It may otherwise overheat.
The tire inflation compressor can be oper-
ated again once it has cooled down.
Emergency spare wheel
405
Wheels and tires
Z
X
Mount the collapsible spare wheel as
described (Y page 384).
The collapsible spare wheel must be moun-
ted before it is inflated.
X
Pull connector ? and the hose out of the
housing.
X
Remove the cap from the valve on the col-
lapsible spare wheel.
X
Screw union nut : of the hose onto the
valve.
X
Make sure on/off switch A of the tire
inflation compressor is set to 0.
X
Insert connector ? into a 12 V socket
(Y page 314) in your vehicle.
X
Turn the SmartKey to position 1 in the igni-
tion lock (Y page 157).
X
Press on/off switch A on the tire inflation
compressor to I.
The tire inflation compressor is switched
on. The tire is inflated. The tire pressure is
shown on pressure gauge =.
X
Inflate the tire to the specified tire pres-
sure.
The specified tire pressure is printed on the
yellow label of the emergency spare wheel.
X
When the specified tire pressure has been
reached, press on/off switch A on the
electric air pump to 0.
The tire inflation compressor is switched
off.
X
Turn the SmartKey to position 0 in the igni-
tion lock.
X
If the tire pressure is higher than the speci-
fied pressure, press pressure release valve
button ; until the correct tire pressure has
been reached.
X
Unscrew air hose union nut : from the
valve.
X
Screw the cap onto the valve of the col-
lapsible spare wheel again.
X
Stow connector ? and the hose in the
lower section of the tire inflation compres-
sor.
X
Stow the tire inflation compressor in the
vehicle.
406
Emergency spare wheel
Wheels and tires
Technical data
All vehicles (except AMG vehicles)
"Minispare" emergency spare wheel
Models with 4-cylinder engine
Tires Alloy wheels
T 155/70 R17 110 M
Tire pressure: 420 kPa (4.2 bar/61 psi)
4.0 B x 17 H2
Wheel offset: 1.54 in (39 mm)
Models with 6-cylinder engine
Tires Alloy wheels
T 155/70 R17 110 M
Tire pressure: 420 kPa (4.2 bar/61 psi)
4.0 B x 17 H2
Wheel offset: 1.34 in (34 mm)
Models with 8-cylinder engine
Tires Alloy wheels
T 155/60 R18 107 M
Tire pressure: 420 kPa (4.2 bar/61 psi)
4.5 B x 18 H2
Wheel offset: 1.42 in (36 mm)
AMG vehicles
collapsible spare wheel
Tires Alloy wheels
175/50 19 97 P
Tire pressure: 350 kPa (3.5 bar/51 psi)
6.5 B x 19 H2
Wheel offset: 0.55 in (14 mm)
Emergency spare wheel
407
Wheels and tires
Z
408
Useful information ............................ 410
Information regarding technical
data .................................................... 410
Identification plates ......................... 410
Service products and filling capaci-
ties ..................................................... 411
Vehicle data ...................................... 419
409
Technical data
Useful information
i
This Operator's Manual describes all
models and all standard and optional equip-
ment of your vehicle available at the time of
publication of the Operator's Manual.
Country-specific differences are possible.
Please note that your vehicle may not be
equipped with all features described. This
also applies to safety-related systems and
functions.
i
Read the information on qualified special-
ist workshops (Y page 27).
Information regarding technical data
G
WARNING
HYBRID vehicles: It is imperative that you read
the HYBRID Supplemental Operating Instruc-
tions included in your vehicle literature port-
folio. You may otherwise not receive all nec-
essary safety information and warning for the
operation of your vehicle.
i
The data stated here specifically refers to
a vehicle with standard equipment. Consult
an authorized Mercedes-Benz Center for
the data for all vehicle variants and trim
levels.
Identification plates
Vehicle identification plate with vehi-
cle identification number (VIN)
X
Open the front left-hand door.
You will see vehicle identification plate :.
Example: vehicle identification plate (USA only)
;
VIN
=
Vehicle model
Example: vehicle identification plate (Canada only)
;
VIN
=
Paint code
i
The data shown on the vehicle identifica-
tion plate is used only as an example. This
data is different for every vehicle and can
deviate from the data shown here. You can
find the data applicable to your vehicle on
the vehicle identification plate.
410
Identification plates
Technical data
Vehicle identification plate with vehi-
cle identification number (VIN)
X
Slide the right-hand front seat to its rear-
most position.
X
Fold floor covering : upwards.
You will see VIN ;.
Engine number
:
Emission control information plate,
including the certification of both federal
and Californian emissions standards
;
Engine number (stamped into the crank-
case)
=
VIN (on the lower edge of the windshield)
Service products and filling capaci-
ties
Important safety notes
G
WARNING
Service products may be poisonous and haz-
ardous to health. There is a risk of injury.
Comply with instructions on the use, storage
and disposal of service products on the labels
of the respective original containers. Always
store service products sealed in their original
containers. Always keep service products out
of the reach of children.
H
Environmental note
Dispose of service products in an environ-
mentally responsible manner.
Service products include the following:
R
Fuels
R
Exhaust gas aftertreatment additives, e.g.
DEF
R
Lubricants (e.g. engine oil, transmission oil)
R
Coolant
R
Brake fluid
R
Windshield washer fluid
R
Climate control system refrigerant
Comply with all valid regulations with respect
to handling, storing, and disposing of service
fluids.
Components and service products must be
matched. You should therefore only use prod-
ucts that have been tested and approved by
Mercedes-Benz.
Information on tested and approved products
can be obtained at an authorized Mercedes-
Benz Center or on the Internet at
http://bevo.mercedes-benz.com.
You can recognize service products approved
by Mercedes-Benz by the following inscrip-
tion on the containers:
R
MB-Freigabe (e.g. MB-Freigabe 229.51)
R
MB Approval (e.g. MB Approval 229.51)
Other designations or recommendations indi-
cate a level of quality or a specification in
accordance with an MB Sheet Number (e.g.
MB 229.5). They have not necessarily been
approved by Mercedes-Benz.
Service products and filling capacities
411
Technical data
Z
Fuel
Important safety notes
G
WARNING
Fuel is highly flammable. If you handle fuel
incorrectly, there is a risk of fire and explo-
sion.
You must avoid fire, open flames, creating
sparks and smoking. Switch off the engine
and, if applicable, the auxiliary heating before
refueling.
G
WARNING
Fuel is poisonous and hazardous to health.
There is a risk of injury.
You must make sure that fuel does not come
into contact with your skin, eyes or clothing
and that it is not swallowed. Do not inhale fuel
vapors. Keep fuel away from children.
If you or others come into contact with fuel,
observe the following:
R
Wash away fuel from skin immediately
using soap and water.
R
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical assistance with-
out delay.
R
If fuel is swallowed, seek medical assis-
tance without delay. Do not induce vomit-
ing.
R
Immediately change out of clothing which
has come into contact with fuel.
Tank capacity
The total capacity of the fuel tank may vary
depending on the equipment in the vehicle.
Model Total capacity
AMG vehicles
17.4 US gal (66.0 l)
or
21.1 US gal (80.0 l)
All other models
21.1 US gal (80.0 l)
Model Of which reserve
AMG vehicles
Approx. 3.7 US gal
(14.0 l)
All other models
Approx. 2.4 US gal
(9.0 l)
Gasoline
Fuel grade
!
Do not use diesel to refuel vehicles with a
gasoline engine. Do not switch on the igni-
tion if you accidentally refuel with the
wrong fuel. Otherwise, the fuel will enter
the fuel system. Even small amounts of the
wrong fuel could result in damage to the
fuel system and the engine. Notify a quali-
fied specialist workshop and have the fuel
tank and fuel lines drained completely.
!
Only refuel using unleaded premium
grade gasoline with at least 91 AKI/
95 RON.
!
Only use the fuel recommended. Operat-
ing the vehicle with other fuels can lead to
engine failure.
!
Do not use the following:
R
E85 (gasoline with 85% ethanol)
R
E100 (100% ethanol)
R
M15 (gasoline with 15% methanol)
R
M30 (gasoline with 30% methanol)
R
M85 (gasoline with 85% methanol)
R
M100 (100% methanol)
R
Gasoline with metalliferous additives
R
Diesel
Do not mix such fuels with the fuel recom-
mended for your vehicle. Do not use addi-
tives. Otherwise, engine damage may
occur. This does not include cleaning addi-
tives for the removal and prevention of res-
idue build-up. Gasoline may only be mixed
with cleaning additives recommended by
Mercedes-Benz; see "Additives". You can
obtain further information from any author-
ized Mercedes-Benz Center.
412
Service products and filling capacities
Technical data
!
To ensure the longevity and full perform-
ance of the engine, only premium-grade
unleaded gasoline must be used.
If standard unleaded gasoline is unavaila-
ble and you have to refuel with unleaded
gasoline of a lower grade, observe the fol-
lowing precautions:
R
Only fill the fuel tank to half full with reg-
ular unleaded gasoline and fill the rest
with premium-grade unleaded gasoline
as soon as possible.
R
Do not drive at the maximum speed.
R
Avoid sudden acceleration and engine
speeds over 3,000 rpm.
You will usually find information about the fuel
grade on the pump. If you cannot find the
label on the pump, ask the staff for assis-
tance.
i
For further information, consult a quali-
fied specialist workshop or visit
http://www.mbusa.com (USA only).
i
E10 fuel contains up to 10% bioethanol.
Your vehicle is E10-compatible. You can
refuel your vehicle using E10 fuel.
As a temporary measure, if the recommended
fuel is not available, you may also use regular
unleaded gasoline with an octane rating of
87 AKI/91 RON. This may reduce engine per-
formance and increase fuel consumption.
Avoid driving at full throttle and sudden accel-
eration. Never refuel using fuel with a lower
AKI.
Information on refueling (Y page 174).
Additives
!
Operating the engine with fuel additives
added later can lead to engine failure. Do
not mix fuel additives with fuel. This does
not include additives for the removal and
prevention of residue buildup. gasoline
must only be mixed with additives recom-
mended by Mercedes-Benz. Comply with
the instructions for use on the product
label. More information about recommen-
ded additives can be obtained from any
authorized Mercedes-Benz Center.
Mercedes-Benz recommends that you use
branded fuels that have additives.
The quality of the fuel available in some coun-
tries may not be sufficient. Residue could
build up in the injection system as a result. In
such cases, and in consultation with an
authorized Mercedes-Benz Center, the gaso-
line may be mixed with the cleaning additive
recommended by Mercedes-Benz. You must
observe the notes and mixing ratios specified
on the container.
Diesel
Fuel grade
G
WARNING
If you mix diesel fuel with gasoline, the flash
point is lower than that of pure diesel fuel.
When the engine is running, exhaust system
components could overheat without being
noticed. There is a risk of fire.
Never refuel with gasoline. Never mix gasoline
with diesel fuel.
!
Only use commercially available vehicular
ULTRA-LOW SULFUR DIESEL FUEL (ULSD,
15 ppm maximum sulfur content) that
meets the ASTM D975 standard. If you do
not refuel with ULSD, you may damage the
BlueTEC exhaust gas aftertreatment sys-
tem of the vehicle.
!
Do not use gasoline to refuel vehicles with
a diesel engine. Do not mix diesel fuel with
gasoline, kerosene or paraffin. This may
otherwise result in damage to the fuel sys-
tem and engine.
You will usually find information about the fuel
grade on the pump. If you cannot find the
label on the pump, ask the staff for assis-
tance.
i
For further information, consult a quali-
fied specialist workshop or visit
http://www.mbusa.com (USA only).
Service products and filling capacities
413
Technical data
Z
Information on refueling (Y page 174).
Low outside temperatures
i
Diesel fuel with improved cold flow prop-
erties is available during the winter months.
Further information about fuel properties
can be obtained from oil companies, e.g. at
gas stations.
Bio-diesel FAME (fatty acid methyl ester)
Mercedes-Benz USA approves the use of bio-
diesel B5 for all BlueTEC diesel engines. The
concentration of bio-diesel in the ULSD may
not exceed 5% by volume.
Pure bio-diesel and diesel fuel with a higher
percentage of bio-diesel, such as B20, can
damage the engine and the fuel system. For
this reason, they are not approved.
For more information, consult the gas station
staff. The bio-diesel B5 label on the gasoline
pump must clearly state that the standard for
ULSD has been fulfilled. If the label is not
clear, do not refuel the vehicle.
Do not refuel your vehicle with fuels unless
they have been approved by Mercedes-Benz.
Information on refueling (Y page 174).
Flexible Fuel vehicles
Important safety notes
G
WARNING
Fuel is highly flammable. If you handle fuel
incorrectly, there is a risk of fire and explo-
sion.
You must avoid fire, open flames, creating
sparks and smoking. Switch off the engine
and, if applicable, the auxiliary heating before
refueling.
G
WARNING
Fuel is poisonous and hazardous to health.
There is a risk of injury.
You must make sure that fuel does not come
into contact with your skin, eyes or clothing
and that it is not swallowed. Do not inhale fuel
vapors. Keep fuel away from children.
If you or others come into contact with fuel,
observe the following:
R
Wash away fuel from skin immediately
using soap and water.
R
If fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical assistance with-
out delay.
R
If fuel is swallowed, seek medical assis-
tance without delay. Do not induce vomit-
ing.
R
Immediately change out of clothing which
has come into contact with fuel.
Flexible Fuel vehicles can be refueled with the
following fuel types:
R
premium-grade unleaded gasoline
R
E85 fuel
R
a mixture of E85 fuel and premium-grade
unleaded gasoline
i
Flexible Fuel vehicles can be recognized
by the Ethanol up to E85 sticker on the
inside of the fuel filler flap.
Fuel consumption
The energy content of E85 fuel is less than
that of the same amount of premium-grade
gasoline. The amount of fuel consumed when
operating the vehicle with E85 fuel is there-
fore higher than with premium-grade gaso-
line.
Maintenance
Inform your authorized Mercedes-Benz Cen-
ter that you are operating or have operated
the vehicle with E85 fuel.
Low outside temperatures
If the outside temperature is below 32
(0 †), the starting procedure can take notice-
ably longer when operating with E85 fuel.
E85 fuel is not suitable for use at outside
temperatures under -4 (-20 †).
414
Service products and filling capacities
Technical data
DEF
Important safety notes
Comply with the important safety notes for
service products when handling DEF
(Y page 411).
DEF is a water-soluble fluid for the exhaust
gas aftertreatment of diesel engines. It is:
R
not poisonous
R
colorless and odorless
R
not flammable
When you open the DEF container, small
amounts of ammonia vapor may be released.
Ammonia vapors have a pungent odor and are
particularly irritating to the skin, to mucous
membranes and to the eyes. You may expe-
rience a burning sensation in your eyes, nose
and throat. Coughing and watering of the
eyes are possible.
Do not inhale ammonia vapors. Fill the DEF
tank only in well-ventilated areas.
Low outside temperatures
DEF freezes at a temperature of approx-
imately 12 ‡(-11 †). The vehicle is delivered
from the factory equipped with a DEF pre-
heating system. Winter operation can thus be
guaranteed even at temperatures below 12
(-11 †).
Additives
!
Only use DEF in accordance with ISO
22241. Do not use additives with DEF and
do not dilute DEF with water. This may
destroy the BlueTEC exhaust gas after-
treatment system.
Purity
!
Impurities in DEF (e.g. due to other ser-
vice products, cleaning agents or dust) lead
to:
R
increased emission values
R
damage to the catalytic converter
R
engine damage
R
malfunctions in the BlueTEC exhaust gas
aftertreatment system
Assuring the purity of DEF is particularly
important with respect to avoiding malfunc-
tions in the BlueTEC exhaust gas aftertreat-
ment system.
If DEF is pumped out of the DEF tank, e.g.
during repair work, it must not be returned to
the tank. The purity of the fluid can no longer
be guaranteed.
Filling capacities
Model Total capacity
All models
6.7 US gal
(25.5 l)
Engine oil
General notes
!
Never use engine oil or an oil filter of a
specification other than is necessary to ful-
fill the prescribed service intervals. Do not
change the engine oil or oil filter in order to
achieve longer replacement intervals than
those prescribed. You could otherwise
cause engine damage or damage to the
exhaust gas aftertreatment.
Follow the instructions in the service inter-
val display regarding the oil change. Other-
wise, you may damage the engine and the
exhaust gas aftertreatment.
When handling engine oil, observe the impor-
tant safety notes on service products
(Y page 411).
The engine oils are matched to the perform-
ance of Mercedes-Benz engines and service
intervals. You should therefore only use
engine oils and oil filters that are approved for
vehicles with maintenance systems.
For a list of approved engine oils and oil filters,
consult an authorized Mercedes-Benz Cen-
Service products and filling capacities
415
Technical data
Z
ter. Or visit the website
http://bevo.mercedes-benz.com.
The table shows which engine oils have been
approved for your vehicle.
Missing values were not available at time of
going to print.
Model Engi
ne
mod
el
MB
Approval
E 300 4MATIC
(Canada only)
E 350
E 350 4MATIC
E 400
E 400 4MATIC
(Canada only)
276 229.5
E 550 4MATIC
278 229.5
E 250 BlueTEC
E 250 BlueTEC
4MATIC
651 228.51,
229.31,
229.51,
229.52
AMG vehicles
157 229.5
Use only SAE 0W-40or SAE 5W-40 engine oils
for AMG vehicles.
i
MB approval is indicated on the oil con-
tainers.
Filling capacities
The following values refer to an oil change
including the oil filter.
Model Capacity
E 550 4MATIC
8.5 US qt (8.0 l)
AMG vehicles
9.0 US qt (8.5 l)
All other models
6.9 US qt (6.5 l)
Additives
!
Do not use any additives in the engine oil.
This could damage the engine.
Engine oil viscosity
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity,
this means that it is thick; a low viscosity
means that it is thin.
Select an engine oil with an SAE classification
(viscosity) suitable for the prevailing outside
temperatures. The table shows you which
SAE classifications are to be used. The low-
temperature characteristics of engine oils
can deteriorate significantly, e.g. as a result
of aging, soot and fuel deposits. It is therefore
strongly recommended that you carry out reg-
ular oil changes using an approved engine oil
with the appropriate SAE classification.
Brake fluid
G
WARNING
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point of the brake
fluid is too low, vapor pockets may form in the
brake system when the brakes are applied
hard. This would impair braking efficiency.
There is a risk of an accident.
You should have the brake fluid renewed at
the specified intervals.
416
Service products and filling capacities
Technical data
Comply with the important safety notes for
service products when handling brake fluid
(Y page 411).
The brake fluid change intervals can be found
in the Maintenance Booklet.
Only use brake fluid approved by Mercedes-
Benz according to MB Approval 331.0.
Information about approved brake fluid can
be obtained at any qualified specialist work-
shop or on the Internet at
http://bevo.mercedes-benz.com.
i
Have the brake fluid regularly replaced at
a qualified specialist workshop and the
replacement confirmed in the Maintenance
Booklet.
Coolant
Important safety notes
G
WARNING
If antifreeze comes into contact with hot com-
ponents in the engine compartment, it may
ignite. There is a risk of fire and injury.
Let the engine cool down before you add anti-
freeze. Make sure that antifreeze is not spilled
next to the filler neck. Thoroughly clean the
antifreeze from components before starting
the engine.
!
Only add coolant that has been premixed
with the desired antifreeze protection. You
could otherwise damage the engine.
Further information on coolants can be
found in the Mercedes-Benz Specifications
for Service Products, MB BeVo 310.1, e.g.
on the Internet at
http://bevo.mercedes-benz.com. Or con-
tact a qualified specialist workshop.
!
Always use a suitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the engine cooling system is not
sufficiently protected from corrosion and
overheating.
i
Have the coolant regularly replaced at a
qualified specialist workshop and the
replacement confirmed in the Maintenance
Booklet.
Comply with the important safety precautions
for service products when handling coolant
(Y page 411).
The coolant is a mixture of water and anti-
freeze/corrosion inhibitor. It performs the
following tasks:
R
corrosion protection
R
antifreeze protection
R
raising the boiling point
If the coolant has antifreeze protection down
to -35 ‡(-37 †), the boiling point of the cool-
ant during operation is approximately 266
(130 †).
The antifreeze/corrosion inhibitor concentra-
tion in the engine cooling system should:
R
be at least 50%. This will protect the engine
cooling system against freezing down to
approximately -35 (-37 †).
R
not exceed 55% (antifreeze protection
down to -49 [-45 †]). Otherwise, heat
will not be dissipated as effectively.
Mercedes-Benz recommends an antifreeze/
corrosion inhibitor concentrate in accord-
ance with MB Specifications for Service Prod-
ucts 310.1.
i
When the vehicle is first delivered, it is fil-
led with a coolant mixture that ensures
adequate antifreeze and corrosion protec-
tion.
i
The coolant is checked with every main-
tenance interval at a qualified specialist
workshop.
Service products and filling capacities
417
Technical data
Z
Filling capacities
Model Capacity
E 400
E 400 4MATIC
Approx. 10.9 US qt
(10.3 l)
E 63 AMG
E 63 AMG 4MATIC
Approx. 11.4 US qt
(10.8 l)
E 550 4MATIC
E 63 AMG S-
MODEL
E 63 AMG S-
MODEL 4MATIC
Approx. 11.5 US qt
(10.9 l)
E 250 BlueTEC
E 250 BlueTEC
4MATIC
Approx. 11.0 US qt
(10.4 l)
All other models
Approx. 10.1 US qt
(9.6 l)
i
Use MB 325.0 or MB 326.0 antifreeze/
corrosion inhibitor.
Windshield washer system
Important safety notes
G
WARNING
Windshield washer concentrate could ignite if
it comes into contact with hot engine compo-
nents or the exhaust system. There is a risk of
fire and injury.
Make sure that no windshield washer con-
centrate is spilled next to the filler neck.
!
Do not add distilled or de-ionized water to
the washer fluid container. Otherwise, the
level sensor may be damaged.
!
Only MB SummerFit and MB WinterFit
washer fluid should be mixed together. The
spray nozzles may otherwise become
blocked.
Comply with the important safety notes for
service products when handling washer fluid
(Y page 411).
At temperatures above freezing:
X
Fill the washer fluid reservoir with a mixture
of water and windshield washer fluid, e.g.
MB SummerFit.
Add 1 part MB SummerFit to 100 parts water.
At temperatures below freezing:
X
Fill the washer fluid reservoir with a mixture
of water and washer fluid, e.g. MB Winter-
Fit.
Adapt the mixing ratio to the outside temper-
ature.
R
Down to 14 (Ò10 †): mix 1 part MB Win-
terFit to 2 parts water.
R
Down to Ò4 ‡(Ò20 †): mix 1 part MB Win-
terFit to 1 part water.
R
Down to Ò20.2 (Ò29 †): mix 2 parts MB
WinterFit to 1 part water.
i
Add windshield washer fluid, e.g. MB
SummerFit or MB WinterFit, to the washer
fluid all year round.
Climate control system refrigerant
Important safety notes
The climate control system of your vehicle is
filled with refrigerant R134a.
The instruction label regarding the refrigerant
type used can be found on the radiator cross
member.
!
Only the refrigerant R134a and the PAG
oil approved by Mercedes-Benz may be
used. The approved PAG oil may not be
mixed with any other PAG oil that is not
approved for R-134a refrigerant. Other-
wise, the climate control system may be
damaged.
Service work, such as topping up refrigerant
or replacing components, may only be carried
out by a qualified specialist workshop. All
418
Service products and filling capacities
Technical data
applicable regulations must be adhered to,
SAE standard J639 included.
Always have work on the climate control sys-
tem carried out at a qualified specialist work-
shop.
Refrigerant instruction label
Example: refrigerant instruction label
:
Warning symbol
;
Refrigerant filling capacity
=
Applicable standards
?
PAG oil part number
A
Type of refrigerant
Warning symbol : advises you about:
R
possible dangers
R
having service work carried out at a quali-
fied specialist workshop
Filling capacities
Missing values were not available at time of
going to print.
AMG vehicles Capacity
Refrigerant
22.6 ± 0.4 oz
(640 ± 10 g)
PAG oil
All other models Capacity
Refrigerant
20.8 ± 0.4 oz
(590 ± 10 g)
PAG oil
4.2 oz
(120 g)
Vehicle data
General notes
Please note that for the specified vehicle
data:
R
the heights specified may vary as a result
of:
-
tires
-
load
-
condition of the suspension
-
optional equipment
R
optional equipment reduces the maximum
payload.
Dimensions and weights
Vehicle data
419
Technical data
Z
Missing values were not available at time of
going to print.
Model
::
Opening
height
;;
Max.
headroom
E 550 4MATIC
All other mod-
els (Sedan)
69.4 in
(1763 mm)
Wagon
80.6 in
(2048 mm)
75.8 in
(1925 mm)
AMG vehicles
(Sedan)
68.7 in -
69.4 in
(1744 mm)
-
(1764 mm)
AMG vehicles
(Wagon)
82.1 in -
82.9 in
(2086 mm)
-
(2106 mm)
Missing values were not available at time of
going to print.
All models (except
for AMG vehicles)
Vehicle length,
Sedan
192.1 in (4879 mm)
Vehicle length,
Wagon
193.1 in (4905 mm)
Vehicle width
including exterior
mirrors
81.5 in (2071 mm)
Wheelbase
113.1 in (2874 mm)
Maximum roof load
220 lb (100 kg)
Maximum trunk
load, Sedan
220 lb (100 kg)
Maximum trunk
load, Wagon
Model, Sedan Vehicle height
E 550 4MATIC
All other models
58.1 in (1477 mm)
Model, Wagon Vehicle height
All models
59.4 in (1509 mm)
Model Turning radius
E 350
E 400
E 250 BlueTEC
37.0 ft (11.28 m)
All other models
37.7 ft (11.50 m)
Missing values were not available at time of
going to print.
AMG vehicles
Vehicle length,
Sedan
192.6 in (4892 mm)
Vehicle length,
Wagon
193.1 in (4904 mm)
Vehicle width
including exterior
mirrors
81.5 in (2071 mm)
Wheelbase
113.1 in (2874 mm)
Maximum roof load
220 lbs (100 kg)
Maximum trunk
load, Sedan
Maximum trunk
load, Wagon
420
Vehicle data
Technical data
E 63 AMG 4MATIC
E 63 AMG S-MODEL
4MATIC
Vehicle
height
Sedan
57.7 in
(1466 mm)
Wagon (E 63 AMG S-
MODEL 4MATIC only)
59.9 in
(1522 mm)
Vehicle data
421
Technical data
Z
422
423
424
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mercedes E-Class Sedan 2015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mercedes E-Class Sedan 2015 in the language / languages: English as an attachment in your email.

The manual is 8,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info