Manual Mercedes CLA 2015 (page 359 of 362) (English)

624684

359

Zoom out

Zoom in

1/362

can deteriorate significantly, e.g. as a result

of aging, soot and fuel deposits. It is therefore

strongly recommended that you carry out reg-

ular oil changes using an approved engine oil

with the appropriate SAE classification.

Brake fluid

WARNING

The brake fluid constantly absorbs moisture

from the air. This lowers the boiling point of

the brake fluid. If the boiling point of the brake

fluid is too low, vapor pockets may form in the

brake system when the brakes are applied

hard. This would impair braking efficiency.

There is a risk of an accident.

You should have the brake fluid renewed at

the specified intervals.

When handling brake fluid, observe the

important safety notes on service products

(Y page 353).

The brake fluid change intervals can be found

in the Maintenance Booklet.

Only use brake fluid approved by Mercedes-

Benz according to MB Approval 331.0.

Information about approved brake fluid can

be obtained at any qualified specialist work-

shop or on the Internet at

http://bevo.mercedes-benz.com.

Have the brake fluid regularly replaced at

a qualified specialist workshop and the

replacement confirmed in the Maintenance

Booklet.

Coolant

Important safety notes

WARNING

If antifreeze comes into contact with hot com-

ponents in the engine compartment, it may

ignite. There is a risk of fire and injury.

Let the engine cool down before you add anti-

freeze. Make sure that antifreeze is not spilled

next to the filler neck. Thoroughly clean the

antifreeze from components before starting

the engine.

Only add coolant that has been premixed

with the desired antifreeze protection. You

could otherwise damage the engine.

Further information on coolants can be

found in the Mercedes-Benz Specifications

for Service Products, MB BeVo 310.1, e.g.

on the Internet at

http://bevo.mercedes-benz.com. Or con-

tact a qualified specialist workshop.

Always use a suitable coolant mixture,

even in countries where high temperatures

prevail.

Otherwise, the engine cooling system is not

sufficiently protected from corrosion and

overheating.

Have the coolant regularly replaced at a

qualified specialist workshop and the

replacement confirmed in the Maintenance

Booklet.

Comply with the important safety precautions

for service products when handling coolant

(Y page 353).

The coolant is a mixture of water and anti-

freeze/corrosion inhibitor. It performs the

following tasks:

corrosion protection

antifreeze protection

raising the boiling point

If the coolant has antifreeze protection down

to -35 ‡(-37 †), the boiling point of the cool-

ant during operation is approximately 266 ‡

(130 †).

The antifreeze/corrosion inhibitor concentra-

tion in the engine cooling system should:

be at least 50%. This will protect the engine

cooling system against freezing down to

approximately -35 ‡ (-37 †).

not exceed 55% (antifreeze protection

down to -49 ‡ [-45 †]). Otherwise, heat

will not be dissipated as effectively.

Service products and filling capacities

357

Technical data

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mercedes CLA 2015 in the language / languages: English as an attachment in your email.

The manual is 7,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mercedes CLA 2015 Manual

Product: