Manual Mercedes B-Class Electric Drive 2017 (page 279 of 290) (English)

703589

279

Zoom out

Zoom in

1/290

Place chocks or other suitable items under

the front and rear of the wheel that is diago-

nally opposite the wheel you wish to change.

Raising the vehicle

WARNING

If you do not position the jack correctly at the

appropriate jacking point of the vehicle, the

jack could tip over with the vehicle raised.

There is a risk of injury.

Only position the jack at the appropriate jack-

ing point of the vehicle. The base of the jack

must be positioned vertically, directly under

the jacking point of the vehicle.

Position a suitable jack correctly on the

intended jacking points. If you fail to position

the jack correctly, the vehicle may be dam-

aged.

The jacking points are recesses in the lower

door sill. They can only be seen from under-

neath. There is one located behind each of the

front wheel arches and in front of the rear

wheel arches.

Position the jack in the jacking points so that

when viewed from the side, the jack is in the

vertical position.

Position a suitable jack only on the jacking

points intended for this purpose.

Never position the jack on the high-voltage

battery. Do not jack up the vehicle on the

high-voltage battery. There is otherwise a risk

of damaging the high-voltage battery.

Also observe the notes in the "Changing a

wheel" section.

Observe the following when raising the vehi-

cle:

To raise the vehicle, only use the vehicle-spe-

cific jack that has been tested and approved

by Mercedes-Benz. If used incorrectly, the

jack could tip over with the vehicle raised.

The jack is designed only to raise and hold the

vehicle for a short time while a wheel is being

changed. It must not be used for performing

maintenance work under the vehicle.

Avoid changing the wheel on uphill and down-

hill slopes.

Before raising the vehicle, secure it from roll-

ing away by applying the parking brake and

inserting wheel chocks. Do not disengage the

parking brake while the vehicle is raised.

The jack must be placed on a firm, flat and

non-slip surface. On a loose surface, a large,

flat, load-bearing underlay must be used. On a

slippery surface, a non-slip underlay must be

used, e.g. rubber mats.

Do not use wooden blocks or similar objects

as a jack underlay. Otherwise, the jack will not

be able to achieve its load-bearing capacity

due to the restricted height.

Make sure that the distance between the

underside of the tires and the ground does not

exceed 1.2 in (3 cm).

Never place your hands and feet under the

raised vehicle.

Do not lie under the vehicle.

Do not start the drive system when the vehicle

is raised.

Never open or close a door or the tailgate

when the vehicle is raised.

Make sure that no persons are present in the

vehicle when the vehicle is raised.

Changing a wheel

277

Wheels and tires

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mercedes B-Class Electric Drive 2017 in the language / languages: English as an attachment in your email.

The manual is 20,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mercedes B-Class Electric Drive 2017

Mercedes B-Class Electric Drive 2017 Additional guide - English - 202 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mercedes B-Class Electric Drive 2017 Manual

Product: