467158
9
Zoom out
Zoom in
Previous page
1/17
Next page
9
Interrupting
Operation
Open oven door or press STOP/
RESET key to interrupt operation.
Display continues to show
countdown time. Close door and
press START key to resume oven
operation.
Using the Oven Control (Electronic Control)
Manual Time Entry
To cook food using a specic entered time and power level.
1. Open oven door and place food in oven. Close door.
READY displays. Fan and light will turn on.
2. Press TIME ENTRY key.
READY and 0000 display.
If pad does not work, open and close oven door and try again.
3. Enter cooking time by using the numbered keys.
4. Press a power level key to change power level if desired.
POWER LEVEL displays with the power setting.
- 00 indicates 0% microwave power, 20 indicates 20%, 50
indicates 50% and 70 indicates 70% microwave power. If a
number is not displayed with POWER LEVEL the microwave is set
to full power.
5. If stage cooking is desired, press TIME ENTRY key and repeat steps 3
through 4.
Display changes to cook time and power level for the next stage.
6. Enter cook time and power level as in steps 3 and 4.
To add another cooking stage press TIME ENTRY key again.
Up to four dierent stages can be programmed.
7. Press START key.
Oven operates and time counts down.
POWER, COOK LEVEL and cooking time display.
8. At end of cooking cycle oven beeps and shuts o.
Programmed Keys
To cook food using keys preprogrammed with cooking sequences.
1. Open oven door and place food in oven. Close door.
READY displays. Fan and light will turn on.
2. Press desired key.
For single key entry, press only one key.
For double key entry, press the two keys, in order, of the double digit
number for the desired cooking sequence.
To change single or double key entry option
see User Options section in this manual.
3. Oven begins to cook.
POWER, power level and total cooking time display. If power level does
not display, microwave is cooking at full power.
For additional cooking time, press preprogrammed key again
to begin cooking sequence again.
4. At end of cooking cycle oven beeps and shuts o.

Pad Time Pad Time
1
10 sec. 6 1:30 min.
2
20 sec. 7 2 min.
3
30 sec. 8 3 min.
4
45 sec. 9 4 min.
5
1 min. 0 5 min.
QTY X2 Key
To increase cooking time
by a specic cooking factor when
cooking more than one serving.
The cooking factor is a percentage
of the original cooking time (from
10 to 100%).
1. Open oven door and place food
in oven. Close door.
READY displays. Fan and
light will turn on.
2. Press X2 key.
• Amount of time added is a
percentage of the original
preprogrammed cooking time.
• The percentage can be
changed. See Programming
the Oven Control section in
this manual.
3. Press desired preprogrammed
key or key sequence.
4. Oven begins cooking.
Displayed cooking time is the
total of original cooking time
plus the added X2 time.
9


Need help? Post your question in this forum.

Forumrules
1

Forum

menumaster-(amana)-rcs511ts

Reset search

  • The jet master heats up all right, during the heating cycle the display flashes and the oven looses power, trips the breaker at times,what must I do, I am a sparky by trade. Thanks Submitted on 5-1-2021 at 07:04

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Menumaster (Amana) RCS511TS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Menumaster (Amana) RCS511TS in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Menumaster (Amana) RCS511TS

Menumaster (Amana) RCS511TS User Manual - German - 16 pages

Menumaster (Amana) RCS511TS User Manual - Dutch - 12 pages

Menumaster (Amana) RCS511TS User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info