820652
7
Zoom out
Zoom in
Previous page
1/14
Next page
7
Follow the assembly steps listed below, prior to
installation of the unit.
6) Remove the back panel of the grill by
removing the two screws as shown and then
lifting the panel up.
7) The prewired controller box has an Ethernet
cord which must be routed through the
controller cableway and into the back of the
grill body before the support brackets are
installed. To do this, pass the cord through the
strain relief which is located on the back left
side of the grill. (Looking at the grill from the
front) This strain relief is located next to the
strain relief used for the component wiring
harness.
8) Once the Ethernet cord is passed into the back
of the grill, connect it into the bottom of the
WiFi card as shown. The tab on the Ethernet
cord goes towards the front of the grill.
9) Tighten the strain relief onto the Ethernet cord
as shown.
10) Replace the back panel by locating its three
bottom tabs into their slots provided. Replace
the two screws which secure the back panel
in place.
11) Install the included antenna into its bulk head.
The bulk head is located on the left panel of
the grill (Looking at the grill from the front).
INSTALLATION STEP 2: WIRING
6
7
8
9
10
11
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Memphis Grills VG0969 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Memphis Grills VG0969 in the language / languages: English as an attachment in your email.

The manual is 6.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info