820630

Memphis Grills VG0859 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
MEMPHIS PRO CART ASSEMBLY INSTRUCTIONS
1. Remove both shelves, the hardware kit, Savorizer, and grate
kit from the grill. The shelves are located in boxes underneath
the grill. The Savorizer and grate kit are in the grill hood. To
remove the Savorizer, cut the 4 zip ties holding it in place.
Remove all laser film on the grill. This is a peel-able plastic left
on to protect your grill from scratches during manufacturing and
transit. Remove all laser film and laser etch lines with WD40 or
olive oil. Once a grill has been heated up it is very difficult to
remove this film, be sure to check your grill thoroughly before
first burn.
2. Insert the Burnpot assembly into the slot inside the grill at the
bottom of the pellet chute.
3. Replace the Savorizer and place 3 large grates on the lower
level and the long grate on the upper level.
4. Remove the Direct Flame Insert and Genie Tool from the right
side shelf.
5. Install 2 shelf bolt (#5) into the right side of the grill. Leave
approximately 1/4” of the bolts sticking out so that the shelf can
slide onto them.
NOTE: ALWAYS HOLD SHELVES FROM THE BOTTOM AS THE
SHELF TOP SLIDES OPEN!
6. Slide the shelf onto the bolts, press down on the shelf to
secure into the keyway. Install the remaining 3 shelf bolts.
Tighten bolts using 3/8” wrench, socket, or adjustable wrench.
7. Repeat steps 5 and 6 for the left side of the grill.
8. Remove two 5mm socket head screws from Display Housing
shipping bracket using the 5mm allen wrench.
9. Snip the zip tie that secures the Display Housing to the
shipping bracket. Remove shipping bracket from Display
Housing. Short screws and shipping bracket can be disposed of.
10. Mount the Display Housing perpendicular to the side panel
over the Display Insert bracket using the two 5mm x 50mm
socket head screws in the hardware kit.
11. Attach the included antenna to the grill by twisting in a
clockwise motion. The antenna is included in the manuals.
12. Attach the cord wrap with included screws found in the
hardware kit.
COMPLETE THE STEPS BELOW IN NUMERICAL ORDER, REFERENCE THE SAME
NUMBERED DIAGRAM AND HARDWARE COMPONENTS FOR CLARIFICATION.
11
HARDWARE COMPONENTS
9. Meat Probe
VG0956 1
8. Cord Wrap
VG0560 1
7. #10 Screw
(SS) DS2186 2
5. Shelf Bolt
DS2311 10
2. Savorizer
VG4403 1
4. Genie Tool
VG1595 1
3. Direct Flame
Insert VG4407 1
Description/ Part No. Qty: Picture:
9
8
12
6
5
3
10
1. VG0001Grate
Kit 1
Right Shelf
Left Shelf
Hardware Kit
Packaging Locations
Savorizer
6. Antenna
VG9023 1
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Memphis Grills VG0859 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Memphis Grills VG0859 in the language / languages: English, French as an attachment in your email.

The manual is 7.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info