36
Troubleshooting and Error Messages Continued
Fuse Information
Problem Cause Solution
Grill Will Not Achieve
Or Maintain Stable
Temperature
Grill isn’t receiving sufficient fuel. Check the hopper for sufficient fuel.
Ensure both sides of the hopper are filled.
Verify that auger motor is rotating.
Grill isn’t receiving sufficient air-
flow.
Check to see if blower have been unplugged or have failed.
Contact dealer or Memphis Grills directly in case of blower failure.
Burn-pot is overloaded with ash build-
up.
Check the burn pot for ash build-up or other obstructions.
Check to see if blower have been unplugged or have failed.
Frequent Flare-ups are
experienced
Flammable material build-up. Clean out ash drawer and scrap grease off Savorizer®
Cooking temperatures
are uneven
Unbalanced airflow throughout the
grill.
Ensure that Savorizer® is installed correctly
Logic Board Layout
4A SLO-BLO Fuse
(VG0332)
0.5A SLO-BLO Fuse
(VG0331) 12A SLO-BLO Fuse
(VG0333)
MicroSD
Antenna Jack
Connector
Power Cable (VG1969) Fuse
• VG9021– Fuse Glass 250VAC 5A 5 x 20 mm