32
Surround Assembly: Assembly Instructions
Peel all plastic protective film off prior to performing the assembly steps listed below. Refer
to page 30-31 for item part numbers, descriptions, and quantities.
Step 1) Turn to the Leg Assembly: Assembly Instructions section (pages 23 to 26) and complete
assembly instructions step 1 to step 7.
Step 2) Attach middle shelf onto the leg
assembly using 4 screws (Part 11) and 4 lock
washers (Part 12) (See Figure 2a). First,
slide the middle shelf (Part 16) into the leg
assembly and lay it on the bottom shelf (See
Figures 2b & 2c). Partially thread screws
with lock washers at the rear locations (See
Figure 2c), and then position the middle
shelf before tightening.
Figure 2b
16
Figure 2c
Applies to
both sides
Figure 2a
12 11