Manual Mellerware IceMaster - ICM001WH (page 4 of 24) (English, French, Portuguese, Spanish)

799569

Zoom out

Zoom in

1/24

sensor malfunction. If the unit doesn’t stop, then move

the unit where there’s no sunlight.

3.2.10. Change water in the reservoir every 24 hours

for hygiene purposes. If the unit isn’t being used, drain

all the wate and dry the tank.

3.3. Automatic Cleaning:

3.3.1. When the machine is in standby mode, press the

“CLEAN” button. You will then see 30 on the display,

which means 30 minutes for cleaning. After 30 minutes

the machine will be on standby mode again.

3.3.2. If you want to stop the cleaning process, press

the “CLEAN” or the “ON/OFF” button. During the

cleaning, auxiliary tools, like neutral or food hygiene

cleaners, can be used.

3.4. Timer:

3.4.1. Timing setting range: 1-24 hour. The default

timer is 1 hour.

3.4.2. Timed shutdown: the machine can be set to shut

down during the ice making process.

3.4.3. Timed start-up: When the machine is in standby

mode, a start time can be set.

3.4.4. How to set the timer.

3.4.4.1. Press the “TIMER” on the operation panel, it

will display 01H for the default timing, and the “H” will

be flashing. Then adjust the timing by pressing the “L”

for increasing 01H or “S” for decreasing, based on your

needs.

3.4.4.2. After 5 seconds the “H” will stop flashing and

the light will turn on, this means the setting is complete.

3.4.4.3. The “xxH” in the display indicates that the

machine currently has a timing function. After the

countdown is at zero, the machine will enter the mode

you need.

3.4.5. How to cancel the timer.

3.4.5.1. If the machine is timed (xxH on the screen),

press “TIMER”, and the “H” will flash on the screen,

press “TIMER” again. The timer will be cancelled.

You can also press the “ON/OFF” button for timing to

cancel.

4. Recycling

4.1. These electrical products, cables, batteries,

packaging, and the manual, should not be mixed

with general household waste. For proper recycling,

please take these products to your nearest Creative

Housewares office where they will be accepted for

recycling free of charge.

4.2. Alternatively, please contact your local authority

or household waste disposal service for further details

of your nearest designated collection point. Correct

product disposal saves resources and prevents

negative effects on human health and the environment.

Troubleshooting table

PROBLEM POSSIBLE CAUSE SOLUTION

“Add Water” indicator is on. Lack of water. Stop the ice maker, fill water, and

press “ON/OFF” button again to

restart the unit.

“Ice Full” indicator is on. Ice is full in basket. Remove ice from ice basket.

Continuously press “Select” button

for 5 seconds, the unit could make

ice 10 cycles even if “ice” indicator

is on.

Ice cubes stick together. The ice making cycle is too long. Stop the ice maker, and restart it

when the ice blocks melt. Select

the small size ice cube selection.

Water temperature in inner tank is

too low.

Replace the water. Temperature of

water recommended at 8-32°C.

Ice making cycle is normal but no

ice formed.

Room temperatukre or water

temperature in inner tank is too

high.

The room temperature should be

10-43°C, water temperature should

be 8-32°C.

Refrigerant in cooling system leaks. Verify by a qualified technician.

Pipe in the cooling system is

blocked.

Verify by a qualified technician.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mellerware IceMaster - ICM001WH in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 5.05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mellerware IceMaster - ICM001WH Manual

Product: