Manual Mellerware 22600WH - BREEDE (page 3 of 8) (English, French)

799565

Zoom out

Zoom in

1/8

3.2 Use and care:

3.2.1. Open the lid of the kettle, fill with tap water to the

desired level. (Min. capacity is 0.5L and max. capacity

is 1.7L). In hard water areas, using purified or filtered

water is recommended to reduce the amount of scale

build up in the kettle. (Note: You may also fill through

the spout, but be careful not to overfill – use water level

gauge to check).

3.2.2. Close the lid until it clips. Place the kettle on the

base and plug into the mains.

3.2.3. To switch the kettle on, press the On/off switch

to the down position. (CAUTION: Do not use excessive

force). When the water has boiled the kettle will switch

off automatically. You can stop the kettle from boiling at

any time by pressing the ON/off switch to the upwards

position.

3.2.4. Pour slowly and carefully. If you wish to re-boil,

please allow a minute for the kettle to cool down.

3.2.5 Warning: If the kettle has just boiled it will be full

of steam that will escape if the lid is opened.

3.2.6 IMPORTANT: Do not open the lid when steam

is coming out of the spout. Before pouring or filling

always remember to disconnect from electricity.

3.2.7 Note: If the kettle is switched on when empty

or with insufficient water, then the kettle will switch

off automatically to protect against dry boiling. Wait

±15minutes until the heating element cools down,

refill with tap water and use as normal. This protec-

tion function is not designed for regular use, as it will

shorten the life of the element. If the kettle is overfilled,

boiling water may be ejected. The kettle is only to be

used with the stand provided (cordless models only).

The appliance must not be immersed in liquid during

cleaning. If the supply cord is damaged, the manufac-

turer or its service agent or a similarly qualified person

must replace it to avoid a hazard.

4. Cleaning and Maintenance

4.1. DESCALING

Always ensure that the kettle is disconnected from the

mains before descaling. Scaling or furring is a common

problem in hard water areas.

4.2. Fill the kettle to MAX position and boil the water.

Remove the kettle from the power socket and the base

unit and place it in an empty sink or bowl.

4.3. Add 50 grams of Citric Acid (available from chem-

ists) or other descaler products (available at supermar-

kets) to the water or as directed.

4.4. Leave it to stand for approximately 5 minutes or

until the effervescence subsides, and then empty the

water. Rinse thoroughly, and wipe.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mellerware 22600WH - BREEDE in the language / languages: English, French as an attachment in your email.

The manual is 0.52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mellerware 22600WH - BREEDE Manual

Product: