712193
7
Zoom out
Zoom in
Previous page
1/48
Next page
9
provider or by using water hardness measuring strips
available in the shops. For softer water the descaling
display can be adjusted to descale less often.
•HolddowntheCALCbutton and by briefly
pressing the m-button set the desired level of
water hardness. The hardness setting will then
show in the display
•Onceyouhavesetthedesiredlevelofwater
hardness, let go of the CALC button.
Your settings are now saved.
•Thesettingsanddisplayareshowninthetable.
Hardness
setting
I II III IV
°dH
<7°
dH
7-1
dH
14-21°
dH
>21°
dH
Display
1
2 3 4
Please note:
•Waterhardnesscannotbeprogrammedwhilebrewing.
•Thelastwaterhardnesslevelchosenremainseven
after removing the power cable.
4. Setting the hotplate
Keeping coee warm on the hotplate aects the taste
of your coee. To avoid this you should enjoy your
coee fresh, by drinking it as soon after brewing as
possible. Unnecessary warming also uses valuable
energy. The factory settings for the appliance are for
40 minutes of warming. After this the hotplate turns
o automatically. This time can be changed as needed:
•HolddowntheON/OFFbutton and by briefly
pressing the m-button set the desired time
(20, 40 or 60 minutes). The current warming
time will be shown in the display .
•Onceyouhavesetthedesiredwarmingtime
let go of the button. Your setting is now saved.
•Thelastsettingchosenremainsevenafterremoving
the power cable.
5. Making coffee
•Ensurethattheapplianceisconnectedto
the power source.
•Fillthewatertank.
•Removethedetachablewatertankbyholdingthe
recessed grip and pulling straight up .
•Removethewatertanklidandllwiththedesired
amount of fresh water from the tap. Using the water
level indicator on the tank you an choose the cor-
rect number of cups.
•Closethetankbyreplacingthelidandinsertthe
tank back in the appliance. Please ensure that you
replace the tank upright in the appliance. The guide
rails on the appliance (left of the tank) will help you
with this .
•Alternativelyusetheglassjugtopourthewaterinto
the tank in the appliance . The required amount
of water can be seen on the water level indicator on
the tank.
Small cup symbol = approx. 85 ml coee per cup,
large cup symbol = approx. 125 ml coee per cup.
•Closethelidonthewatertankandplacetheglass
pot with closed lid in the appliance.
•Opentheswivellter to the left.
•FoldaMelitta
®
filter bag 1x4
®
at the embossed seam
and place it in the filter holder . Press the filter bag
into the filter holder by hand, to ensure a good fit.
•Putthegroundcoeeintothecoeelter.We
recommend using 6 g of coee per large cup at a
medium setting of the AromaSelector
®
.
•Alternatively,youcanvarythetasteofthecoee
according to your personal preference using the
same quantity of coee. For a milder coee, turn the
AromaSelector
®
to the left (
). For a stronger
coee, turn it to the right (
).
•Turntheapplianceon. Brewing begins.
•Aftermakingyourcoeethehotplatewillkeepit
warm and will turn o automatically after the time
you have set (see point 4). This avoids unnecessary
use of electricity and saves energy. You can of course
turn the machine o manually at any time.
•Thedripstoppreventsyourcoeefromdripping
when you remove the pot from the appliance .
•Withthehelpofthedetachableinnerlteryoucan
dispose of the filter bag simply and easily .
6. Timer Feature
The appliance is equipped with a TIMER feature. This
starts the brewing process at a time you programme.
•Preparetheapplianceasdescribedinpoint5‘making
coee’, but without pressing the ON/OFF button.
•Tosetthedesiredstarttime,holddowntheTIMER
button . The first time you programme it the
display will show 00:00.
•Setthedesiredstarttimebyrepeatedlypressing
the h and m buttons . This goes faster if you hold
down the button.
•AfterlettinggooftheTIMERbuttonthecurrent
time will show. The chosen start time is saved until
you set a dierent time or remove the appliance
from the power source.
•BybrieypressingtheTIMERbutton the timer
feature is activated for the next brewing process.
To show this the TIMER button is illuminated
and the programmed start time shows briefly in the
display .
•Theapplianceautomaticallystartstomakecoeeat
the time you have set.
•Aslongasyoudonotremovetheplugfromthe
socket or set a new start time, the previous start
time is saved.
•BybrieypressingtheTIMERbutton you can
deactivate the timer feature at any time. The light in
the TIMER button goes o.
•Ifyouwanttomakecoeebeforethestarttimeyou
have programmed, press the ON/OFF button .
The TIMER feature will be deactivated.
7. Cleaning and maintenance
External cleaning
•Switchothemachinebeforecleaninganddisconnect
the power cable.
•Allowtheappliancetocoolcompletelybefore
cleaning it.
•Cleanthepartsthatcomeintocontactwithcoee
(jug, filter holder, etc.) after each use.
•Thehousingcanbecleanedwithasoftdampcloth.
•Theglasspotandlid,thelterinsertandthe
 G B
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta LOOK Timer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta LOOK Timer in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info