712195

Melitta Look Therm Timer Manual

7
Zoom out
Zoom in
Previous page
1/40
Next page
9
6. Timer Feature
The appliance is equipped with a TIMER feature. This
starts the brewing process at a time you programme.
• Prepare the appliance as described in point 5 ‘making
coee’, but without pressing the START button.
• To set the desired start time, hold down the TIMER
button . The first time you programme it the
display will show 00:00.
• Set the desired start time by repeatedly pressing
the h and m buttons . This goes faster if you hold
down the button.
• After letting go of the TIMER button the current
time will show after two seconds. The chosen start
time is saved until you set a dierent time or remove
the appliance from the power source.
• By briefly pressing the TIMER button the timer
feature is activated for the next brewing process.
To show this the TIMER button is illuminated
and the programmed start time shows briefly in the
display .
• The appliance automatically starts to make coee at
the time you have set.
• As long as you do not remove the plug from the
socket or set a new start time, the previous start
time is saved.
• By briefly pressing the TIMER button you can
deactivate the timer feature at any time. The light in
the TIMER button goes o.
• If you want to make coee before the start time you
have programmed, press the START button . The
TIMER feature will be deactivated.
7. Cleaning and maintenance
External cleaning
• The housing can be cleaned with a soft damp cloth.
• The jug lid, the filter insert and the
swivel filter can be washed in the dishwasher.
Descaling:
Based on the water hardness level you have set
(see point 3) the descaling programme should be run
promptly after the CALC button lights up.
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using Melitta
®
Anti Calc Filter Café
Machines.
• Briefly press the CALC button , it will start to flash.
• The descaling process will now run automatically.
To remove even stubborn limescale the descaling
process takes 25 minutes. The remaining time is
shown in the display.
• Attention: Only by carrying out the descaling
process completely will all limescale deposits be
removed and the light on the CALC button will go
o. The descaling process should therefore not be
interrupted before it has run for the full 25 minutes.
• When the descaling process is completed the light
on the CALC button will go o. The appliance will
turn o automatically.
• At the end of the descaling process, the appliance
should be rinsed twice through, using the maximum
amount of water without coee. This will remove
any remaining limescale deposits.
8. Notes on disposal
• Appliances labelled with this symbol are subject
to European guidelines for WEEE (Waste Electrical
and Electronic Equipment).
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
 G B
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta Look Therm Timer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta Look Therm Timer in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info