671966

Melitta Easy Timer Manual

8
Zoom out
Zoom in
Previous page
1/37
Next page
7
 G B
people with limited physical,
sensory or mental aptitude, or
who have limited experience or
knowledge, if they are super-
vised or instructed in how to
use the appliance safely and have
understood the dangers involved
in using it.
• Children must not play with the
appliance.
• Replacement of the power cable
and all other repairs should only
be carried out by Melitta Cus-
tomer Service personnel.
2. Before rst use
• Ensure that the power supply in your home
corresponds to that on the model plate on the
base of the appliance.
• Connect the appliance to a power source. Unused
cable can be stored in the base of the appliance.
• Set the current time using the buttons “h” and “m”
. This goes faster if you hold down the button.
The appliance is only ready to use once the
time has been set. You can turn the display light
on or o by simultaneously pressing the h and m
buttons for longer than two seconds
• All appliances have been tested during production
to ensure they work perfectly. Therefore there may
be for example water deposits remaining. Rinse the
appliance twice with the maximum amount of water
and without a filter bag or ground coee, in order to
clean it.
• For the best coee enjoyment and convenient use,
the appliance is equipped with various features.
These features are explained below.
3. Setting the hotplate
Keeping coee warm on the hotplate aects the taste
of your coee. To avoid this you should enjoy your
coee fresh, by drinking it as soon after brewing as
possible. Unnecessary warming also uses valuable en-
ergy. The factory settings for the appliance are for 40
minutes of warming. After this the hotplate turns o
automatically. This time can be changed as needed:
• Hold down the START-button and by briefly
pressing the h-button set the desired time
(20, 40 or 60 minutes). The current warming
time will be shown in the display .
• Once you have set the desired warming time
let go of the button. Your setting is now saved.
• The last setting chosen remains even after removing
the power cable.
4. Making coffee
• Ensure that the appliance is connected to
the power source.
• Open the lid on the water tank.
• Fill the water tank with the desired amount of water
using the glass pot. With the help of the water level
display on the tank you can choose the correct
number of cups.
Small cup symbol = approx. 85 ml coee per cup,
large cup symbol = approx. 125 ml coee per cup.
• Close the lid on the water tank and place the glass
pot with closed lid in the appliance.
• Open the swivel filter to the left.
• Fold a Melitta
®
filter bag 1x4
®
at the embossed seam
and place it in the filter holder. Press the filter bag
into the filter holder by hand, to ensure a good fit.
• Put the ground coee into the filter. The amount
depends on your personal taste. We recommend
using 6g of ground coee per large cup.
• Swivel the filter back into the appliance.
• Turn the appliance on . Brewing begins.
• After making your coee the hotplate will keep it
warm and will turn o automatically after the time
you have set (see point 3). This avoids unnecessary
use of electricity and saves energy. You can of course
turn the machine o manually at any time.
• The drip stop prevents your coee from dripping
when you remove the pot from the appliance.
5. Timer Feature
The appliance is equipped with a TIMER feature. This
starts the brewing process at a time you programme.
• Prepare the appliance as described in point 4 ‘making
coee’, but without pressing the START button.
• To set the desired start time, hold down the TIMER
button . The first time you programme it the
display will show 00:00. While setting the timer the
word 'timer' appears in the display.
• Set the desired start time by repeatedly pressing
the h and m buttons . This goes faster if you hold
down the button.
• After letting go of the TIMER button the current
time will show. The chosen start time is saved until
you set a dierent time or remove the appliance
from the power source.
• By briefly pressing the TIMER button the timer
feature is activated for the next brewing process.
To show this the TIMER button is illuminated
and the programmed start time shows briefly in the
display .
• The appliance automatically starts to make coee at
the time you have set.
• As long as you do not remove the plug from the
socket or set a new start time, the previous start
time is saved.
• By briefly pressing the TIMER button you can
deactivate the timer feature at any time. The light in
the TIMER button goes o.
• If you want to make coee before the start time you
have programmed, press the START button . The
TIMER feature will be deactivated.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta Easy Timer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta Easy Timer in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info