711448

Melitta CI Touch Manual

49
Zoom out
Zoom in
Previous page
1/278
Next page
Care and maintenance
49
ENGLISH
Requirements:
ū The ready symbol appears on the
display.
ū The collecting vessel (0.7l) is under the
spout.
1. Press the "Rotary switch" for 2seconds.
» The menu appears on the display.
2. Navigate to the Care > Descaling menu.
3. Select Start and conrm your selection.
4. Follow the further instructions on the
display up to the end of the descaling
programme.
9.8 Setting the water hardness
The set water hardness inuences the fre-
quency of descaling. The harder the water,
the more frequently the appliance has to
be descaled.
Information
The water hardness cannot be set if you
use a water lter.
Determine the water hardness with the
enclosed test strip. Observe the instruc-
tions on the test strip packaging and in
the table11, page51.
Requirement: The ready symbol appears
on the display.
1. Press the "Rotary switch" for 2seconds.
» The menu appears on the display.
2. Navigate to the
Settings > Water hardness menu.
3. Select the water hardness range and
conrm your selection.
9.9 Using a water lter
The use of a water lter extends the ser-
vice life of the appliance and the appliance
has to be descaled less frequently. The
water lter contained in the scope of deliv-
ery lters calcium and other pollutants out
of the water.
1
37
38
39
Fig. 18: Screwing/Unscrewing the water
lter
The water lter(38) screwed into and
unscrewed from the thread(39) on the
base of the water tank(1) using the screw-
ing aid at the end of the enclosed coee
spoon(37).
Inserting the water lter
Information
Place the water lter into a vessel lled
with fresh tap water for a few minutes
before inserting it.
Requirements:
ū The ready symbol appears on the
display.
ū The collecting vessel (0.7l) is under the
spout.
1. Press the "Rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Insert
lter menu.
3. Select Start and conrm your selection.
4. Follow the further instructions on the
display.
» The water hardness is automatically
adjusted on the water lter by the
appliance.
» The ready symbol appears on the
display.
Changing the water lter
Change the water lter when the appli-
ance requests you to do so.
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta CI Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta CI Touch in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 12,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info