711448

Melitta CI Touch Manual

41
Zoom out
Zoom in
Previous page
1/278
Next page
Permanently changing beverage settings
41
ENGLISH
During beverage dispensing (coee
or milk), use the "Rotary switch" to
set the relevant beverage amount.
During the grinding process, use the
"Coee strength" button to set the
coee strength.
5.7 Stopping beverage
preparation
To stop beverage preparation prematurely,
press the selected direct key again.
5.8 Preparing two beverages
simultaneously
The "2 cups" button is used to pre-
pare two beverages.
Information
Two-cup dispensing is not possible for
mixed beverages that are mixed with hot
water (e.g. Americano), for milk foam,
warm milk and hot water.
8
26
Fig. 11: Two-cup dispensing
1. Place two vessels beneath the
spout(8).
2. Press the "2 cups" button(26).
3. Continue as described for preparation
of the relevant beverage.
Information
ū The setting only applies to the next
beverage that is prepared.
ū If a beverage is not prepared within
1 minute, the appliance switches to
single-cup dispensing.
6 Permanently changing
beverage settings
The appliance oers further options for
preparing coee specialities.
6.1 Changing default settings
Depending on the beverage, the following
default settings can be changed:
Coee amount, amount of froth, milk
amount, hot water amount, coee
strength and temperature.
Changing the beverage settings is similar
for all beverages. Changing the coee
strength for an espresso is described here
as an example.
1. Press the "Rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the
Direct keys > Espresso > Coee strength
menu.
3. Select the desired coee strength and
conrm your selection.
4. Select the Exit command to exit the
menu.
» The selected coee strength is used the
next time an espresso is prepared.
Information
The default settings remain valid until they
are changed again.
7 Personal settings
– "MyCoee"
The "My Coee" function lets you save
personal beverage settings and assign
them to a user.
When selecting a recipe with milk, connect
the milk container or a commercially
available milk pack (depending on the
model).
1. Place a vessel beneath the spout.
2. Press the "Rotary switch" and navi-
gate to the Recipes menu or keep the
"my
recipes" button pressed.
» The recipe selection appears on the
display.
3. Select a beverage recipe and conrm
your selection.
» Beverage dispensing takes place
and ends automatically.
4. Remove the vessel.
5.6 Changing beverage set-
tings before and during
preparation
Beverage settings can be changed before
and during beverage preparation.
Information
These settings only apply to the current
beverage preparation.
Changing beverage settings before
preparation
The bean type can be changed before
selecting a beverage.
Before selecting a beverage, set
the desired bean chamber with the
"BEANSELECT" slider.
» The selected bean type is used for the
beverage preparation.
Changing beverage settings during
preparation
The beverage quantity and the coee
strength can be changed during beverage
preparation.
Requirement: The ready symbol appears
on the display.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta CI Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta CI Touch in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 12,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info