711448

Melitta CI Touch Manual

35
Zoom out
Zoom in
Previous page
1/278
Next page
Basic operation
35
ENGLISH
the technical data (see chapter11,
page51).
ū Only connect the appliance to a prop-
erly installed earthing contact socket. If
in doubt, consult a specialist electrician.
ū The socket must have a fuse of at least
10 A.
3.5 Switching on the appliance
for the rst time
During initial start-up, the language, the
time and the water hardness can be set.
The settings can be changed at a later
point in time (see chapter8, page43
and chapter9.8, page49).
Use the enclosed test strip to determine
the water hardness. Observe the instruc-
tions on the test strip packaging and in the
table in chapter11, page51.
Information
We recommend pouring away the rst two
cups of coee after initial start-up.
Requirement: The appliance has been
installed and connected.
1. Place a vessel beneath the spout.
2. Switch on the appliance with the ON/
OFF button.
» The welcome display appears on the
appliance.
» The request to carry out the setup
appears on the display: Please set up
the machine.
3. Conrm the setup using the "Rotary
switch".
» The Language menu appears.
4. Select your language using the "Rotary
switch". Conrm your selection.
» The Clock menu appears.
5. Select the hour and the minutes using
the "Rotary switch". Conrm your
settings.
» The Water hardness menu appears.
6. Select the determined water hardness
range with the arrow buttons or con-
rm the default value using the "Rotary
switch".
» The request Please rell and insert
water tank appears.
7. Remove the water tank. Rinse out the
water tank with clean water. Insert the
water lter (see chapter „Switching on
the appliance“ on page 35).
Fill the water tank with fresh water and
insert it.
» The appliance heats up and per-
forms automatic rinsing.
» The ready symbol and the request
Fill beans appear on the display
8. Fill coee beans into the bean con-
tainer. To do this, read chapter4.4,
page37.
4 Basic operation
This chapter describes basic operating
steps for using the appliance on a daily
basis.
4.1 Switching the appliance on
and o
Before switching on after starting up the
appliance for the rst time, read chap-
ter3.5.
Information
ū When switched on and o, the appli-
ance performs automatic rinsing.
ū During rinsing, rinsing water is also
conducted into the drip tray.
ū The automatic switch-o rinsing can be
switched on or o in the Settings menu.
Switching on the appliance
1. Place a vessel beneath the spout.
2. Press the ON/OFF button.
» The welcome display appears on the
appliance.
» The appliance heats up and performs
automatic rinsing.
» The ready symbol appears on the
display.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta CI Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta CI Touch in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 12,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info