Manual Melitta caffeo n 86 e 915 (page 18 of 57) (English, German, Dutch, Danish, French, Swedish)

361887

Zoom out

Zoom in

1/57

31 32

Setting functions

Cleaning

14.1 General cleaning

Wipe the outer surfaces of the machine with

a damp cloth.

Fig. P When the drip tray (8) is full (as shown

by the level indicator (10)), remove and empty

it. For thorough cleaning, the drip grate (9)

can be removed from the drip tray (8). Use

only warm water and non-scouring agents to

clean the parts. Also clean the level indicator

(10) to ensure its continued working. Simply

pull it out. After cleaning, put all parts back

together again. Only use the machine when

it is completely re-assembled.

Occasionally wipe the Bean Select bean

container (2) with a damp cloth to remove

any coffee oil or grease.

Regularly empty the coffee grounds container

(11) – at least 1x a day. For this, push the coffee

outlet (12) into the upper position and pull

out the coffee grounds container to the front.

Dispose of the coffee grounds and rinse out

the container with water. The machine is only

ready for use when the coffee grounds

container has been inserted back into the

appliance.

Tip: Throw coffee grounds away with organic

waste or onto the compost heap.

14.2 Cleaning the Perfect Cappuccino

Milk deposits in the Perfect Cappuccino (14)

can be easily removed. Unscrew the lower

part of the Perfect Cappuccino, Fig. B, and

rinse it under running water or put it in the

dishwasher. If you want to clean the spring

coil whisk separately, pull the lower part of

the Perfect Cappuccino out of the steam pipe

(13) Fig. Q.

After cleaning, push the spring coil whisk

wheel back into the steam pipe (13) from

below until it snaps into place. Secure both

to the Perfect Cappuccino.

Setting functions

13.6 Language

The appliance is supplied with the following

languages: English, German, French, Dutch,

Danish and Swedish. Proceed as follows to

select the desired language:

Turn the function controller (20) to “F”.

Keep on pressing the selection keys (19)

until “Language” is selected; then press

Start (22).

Use the selection keys (19) to set the desired

language and confirm with Start (22).

The setting is saved and you are returned

to the main menu.

13.7 Cycles

The function “Cycles” displays the total number

of brewing cycles. You can also see how many

brews are still to elapse before de-scaling or

cleaning is required.

Turn the function controller (20) to “F”.

Keep on pressing the selection keys (19)

until “Supplies” is selected; then press

Start (22).

The total number of cycles appears first.

Press the start key again for information on

the next de-scaling and cleaning cycles.

Confirm again with the start key and you

are returned to the main menu.

Cleaning

14.3 Cleaning the grinder

The grinder does not usually need to be

cleaned. Now and again, larger residues can

be removed with a small brush. Never clean

the grinder with water.

14.4 Integrated rinsing programme

The appliance can be rinsed individually at

any time. Proceed as follows:

Turn the function controller (20) to

“Clean/Decalcify”. Use the selection keys (19 )

to select “Rinsing” and confirm with Start (22).

“Appliance is rinsing” appears in the display

and the rinsing symbol flashes.

When the process has ended, “Rinsing

completed” appears.

By pressing the Start key again, you are

returned to the Clean/Decalcify menu.

The appliance is ready for operation again.

14.5 Integrated cleaning programme

This programme is for the complete removal

of residues and traces of grease which cannot

be removed by hand. We recommend monthly

cleaning or after some 200 brewed cups – at

the latest when the appliance requests you to

do so. “Clean!” appears in the display and the

cleaning symbol lights up.

Tip: Use the specially developed Melitta

cleaning tabs for fully automatic coffeemakers

and single cup machines, as these are adapted

exactly to your Melitta

CAFFEO

Turn the function controller (20) to

“Clean/Decalcify”. Use the selection keys (19 )

to select “Cleaning” and confirm with

Start (22).

Fill the water reservoir (7) to capacity

(1.5 litres).

Fig. R Set the coffee bean container (2) to

ground coffee operation and insert the

cleaning tab into the ground coffee chute.

After inserting, confirm by pressing the start

key (22).

Empty the coffee grounds container (11)

and replace. Then pull out the container to

the middle of the drip tray, where it can

collect the cleaning water.

Now press the start key (22).

The cleaning programme can no longer be

interrupted. There are 6 rinsing cycles with

breaks. The programme lasts some 8 minutes.

“Cleaning in progress” appears in the display

during the whole operation.

When the programme is over, empty the

coffee grounds container and replace

completely. After inserting, confirm by

pressing the start key (22). Now confirm

the “Cleaning completed” message by

pressing the start key (22).

After putting into serving operation, the

coffeemaker is ready for use again.

14.6 Cleaning the brewing unit

We recommend cleaning the brewing unit

from time to time. This is how to proceed:

Shut down the appliance.

Fig. S Open the service door (6).

Fig. T Press the red safety lever on the right

upwards until it stops.

Fig. U Keep the red safety knob at top left

pressed with your left hand. At the same

time, use your right hand to press down

the interlocking key at the front of the

brewing unit. Pull the brewing unit out to

the front, Fig. V

Fig. W Turn the red handle at the side of

the brewing unit to open it.

Now you can thoroughly clean the brewing

unit under running water.

After cleaning, turn back the red handle.

Fig. T Put the brewing unit back into the

appliance, press down the safety lever and

close the service door.

The appliance can be switched on again.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Melitta caffeo n 86 e 915 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Melitta caffeo n 86 e 915 Manual

Product: