362055
12
Zoom out
Zoom in
Previous page
1/47
Next page
Cup filling
volume
Bar lights up
Cup filling
volume
Bar flashes
19 Decalcifying Flashes Decalcifying programme running.
18 Cleaning Flashes Cleaning programme running.
25 Brewing strength Bar lights up
25 Brewing strength Off
Bean container is set to ground
coffee or extraction position.
24
18 Cleaning Lights up
Appliance needs cleaning.
19 Decalcifying Lights up
Appliance must be decalcified.
Coffee grounds container not fitted
or not properly inserted.
Flashes
18
Coffee grounds
container
Coffee grounds container full. Take care
when emptying that the service door is
closed and the machine switched on.
Wait about 5 seconds before replacing
the grounds container.
18
Coffee grounds
container
Lights up
18 Water reservoir Flashes
Knob for steam/hot water
outlet is set to open.
18 Water reservoir Lights up
Water reservoir empty. Fill with water and
replace. Continue operation by pressing the
start key. It can happen that air is trapped
between the pump and the water reservoir.
In this case, confirm repeatedly via the start
key until the new water supply is drawn.
19 20
Symbol No Meaning Explanation
Symbole and displays 3.1 Symbole
3
Symbole and displays
3.2 Displays
3
Symbol No Meaning Display Explanation
22 On/Off
23 Start/Stop
21 1 or 2 cups
21 Steam
21 Decalcifying
21 Cleaning
21 Function
2 Bean container
Ground coffee
Steam/hot
water outlet
Indication and setting of water
hardness and Auto-Shut-Off time.
Remove bean container. Set the bean
selector switch to midposition beforehand.
Use whole beans for brewing.
The grinder is activated.
Starts and stops the selected
function and confirms all inputs.
Switching machine on/off.
Making 1 or 2 cups.
Steam operation.
Automatic decalcifying programme.
Automatic cleaning programme.
Steam (under steam operation) or hot water
(under normal operation) emerges from the
milk frother.
24
25 Brewing strength Bar flashes
Bean container is set to nondefined or
extraction position when drawing beans.
2
15
Brewing with ground coffee; do not put
in more than 2 level scoops of coffee.
Indicates the brewing strength set, adjus-
table with brewing strength regulator.
Whole coffee beans
2
18 Temperature Flashes
Operating temperature not yet reached.
Indicates the cup filling volume, use
the water quantity regulator to adjust.
The brewing unit is overcharged. Switch the appli-
ance off and remove the brewing unit. Remove
the ground coffee and replace the brewing unit.
The appliance is then ready for use again.
The service door is open or the
brewing unit is not fitted.
Flashes
18
Cleaning,
Decalcifying
The service door was opened or
Auto-Shut-Off function is activated.
Automatic shut
down
18 Temperature Lights up Appliance is ready for use.
ENGLISH
F
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta caffeo n 66 e 911 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta caffeo n 66 e 911 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info