712198
50
Zoom out
Zoom in
Previous page
1/344
Next page
Care and maintenance
50
GB
4. Empty the drip tray and the coee
grounds container.
5. Insert the drip tray without the coee
grounds container.
6. Place the coee grounds container
beneath the outlet.
» The appliance rinses twice.
» The Clean display ashes
rapidly and requests you to remove
the brewing unit and insert a clean-
ing tablet.
7. Remove the brewing unit. Do not
switch o the appliance.
8. Rinse the brewing unit under running
water (see section7.3 Cleaning the
brewing unit on page48).
9. Place a cleaning tablet in the brewing
unit. Insert the brewing unit into the
appliance.
Fig. 18: Placing a cleaning tablet in the
brewing unit.
 The second stage of the cleaning
programme starts. Two coee beans light
up.
» The appliance performs several
rinsing operations.
» The Drip tray display lights
up and requests you to empty the
drip tray and the coee grounds
container.
  The third stage of the cleaning
programme starts. Three coee beans light
up.
10. Empty the drip tray and the coee
grounds container.
11. Insert the drip tray without the coee
grounds container.
  The fourth stage of the cleaning
programme starts. The three coee beans
ash.
12. Place the coee grounds container
beneath the outlet.
» The appliance performs several
rinsing operations.
» The Drip tray display lights
up and requests you to empty the
drip tray and the coee grounds
container.
13. Empty the drip tray and the coee
grounds container.
14. Insert the drip tray and the coee
grounds container.
» The cleaning programme is nished.
» The Clean display goes out.
» The appliance is ready for operation.
Information
If the cleaning programme has been
interrupted, e.g. because you uninten-
tionally switched o the appliance, you
must switch the appliance on again and
follow the instructions from step 10. The
appliance is then ready for operation, even
if it has not been completely cleaned.
For complete cleaning, you must run the
cleaning programme from the beginning.
7.5 Running the descaling
programme
The descaling programme is used to
remove limescale deposits in the interior
of the appliance with fully automatic
coee maker descaling agents.
To avoid damage to the appliance, we
recommend running the descaling pro-
gramme every 3 months or as requested
by the appliance, unless you regularly use
a water lter.
The Descaling display light
requests you to descale the appliance.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta Avanza at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta Avanza in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info