712198

Melitta Avanza Manual

45
Zoom out
Zoom in
Previous page
1/344
Next page
Changing basic settings
45
GB
Display Energy save
mode after:
Switch o after:
 
ash
30 minutes 8 hours
Information
Press any button to exit Energy Save
mode.
Requirement: The appliance is ready for
operation.
1. Press the "Service" button for
more than 2seconds to call up Service
mode1.
2.  Press the "Service" button
repeatedly until the display for the Auto
O function appears.
3. Press the "Coee strength" button
repeatedly until the desired time is set.
4. You can call up the next function
or exit Service mode:
a) Briey press the "Service" button to
navigate to the next function.
b) Press the "Service" button for more
than 2seconds to save the setting
and exit the service mode.
6.3 Setting the water
hardness
Setting the water hardness regulates how
frequently you are requested to descale
the appliance. The harder the water, the
more frequently the appliance has to be
descaled.
Information
Water hardness cannot be set while using
a water lter (see section7.6 Using a water
lter on page52). If a water lter is used,
the water hardness is set to soft.
Determine the water hardness with the
enclosed test strip. Observe the instruc-
tions on the test strip packaging and in the
table Water hardness range on page56.
The following settings are possible:
Display Water hardness
soft, descale after 150litres

medium, descale after 100litres
 
hard, descale after 70litres
 
ash
very hard, descale after 30litres
no
coee beans
A water lter is used. No adjust-
ment is possible.
Requirement: The appliance is ready for
operation.
1. Press the "Service" button for
more than 2seconds to call up Service
mode1.
2.  Press the "Service" button
repeatedly until the display for the
Water hardness function appears.
3. Press the "Coee strength" button
repeatedly until the desired water
hardness is set.
4. You can call up the next function
or exit Service mode:
a) Briey press the "Service" button to
navigate to the next function.
b) Press the "Service" button for more
than 2seconds to save the setting
and exit the service mode.
6.4 Activating/deactivating
switch-o rinsing
Rinsing is always carried out immediately
after switching on the coee system.
Only switch-o rinsing can be activated
or deactivated. If it is activated, the coee
system is rinsed after being switched o.
Information
We recommend that you do not per-
manently deactivate switch-o rinsing,
because switch-o rinsing cleans the
coee system.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta Avanza at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta Avanza in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info