508301
30
Zoom out
Zoom in
Previous page
1/41
Next page
30
KEY TO THE MAIN COMPONENTS
OF THE APPLIANCE
1. Motorsection
2. On/Offbutton
3. Tamper
4. Feed tube
5. Mixingbowllid
6. Mixingbowl
7. Grating/slicingattachment
8. Grating/slicingdisc(3pcs.)
9. Motorspindle
10.Attachmentholder
11.Bladeattachment
12.Mixingattachment
13.Knifeunit(blender)
14.Blenderjug
15.Blenderlid
16.Filterelement
17.Plug/measuringbowl
18.Knifeunit(grinder)
19.Grinder
PRIOR TO FIRST USE
• Removeallpackagingand
transport materials from the inside
and outside of the appliance.
• Checkthattheappliancehasno
visible damage and that no parts
are missing.
• Beforeusingforthersttime(or
after prolonged storage without
use), wash any parts that will
comeintocontactwithfood.See
“Cleaning”.
USING THE APPLIANCE
Assemblingandusingthefood
processor
1. Placethemotorsection(1)ona
level surface, e.g. a kitchen counter,
and make sure it is standing
rmlyonthefoursuctioncups
underneath.
2. Fit the motor spindle (9) onto the
motor section.
3. Fitthemixingbowl(6).Placethe
mixingbowlsothatthehandle
faces backwards and to the right
andturnthemixingbowlclockwise
untilitclicksintoplace.(Seearrows
and locking symbol on the motor
part).
4. Fit the required accessory to the
motor spindle as described in
points 5-7 below.
5. Ifyouhavetousetheblade
attachment(11)youmustalways
ttheattachmentholder(10)
tothemotorspindlerst.Then
install the blade attachment on the
attachment holder.
o Thebladeattachmentcan
be used for many different
purposes, e.g. chopping meat
and vegetables.
o Cutfoodsuchasmeat,bread
and vegetables into pieces
ofapproximately2cmbefore
placingtheminthemixing
bowl.
o NOTE:Neverllthemixing
bowltoabovethe”1000ml
max”mark.
6. Ifyouaregoingtousethegrating/
slicingdiscs(8)youmustrst
install one of them on the grating/
slicingattachment(7).Ensurethatit
iscarefullypushedintoplace.Then
install the attachment on the motor
spindle.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melissa 646181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melissa 646181 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info