STEAM IRONING
- Open the reservoir lid behind the handle to fill the iron with
water.
- Fill the reservoir with cold water until the water level reaches
the opening.
- Replace the lid.
- Plug the iron in and switch it on.
- Adjust the temperature dial to indicate the material to be
ironed:
- Temperature for nylon, acetate and other synthetic
fabrics •
- Temperature for wool and cotton ••
- Temperature for linen •••
- Press and release the steam shot button to use the steam
shot function. Repeat the procedure as required. If you need
to fill up with water during ironing, remember to unplug the
iron first.
SPRAY FUNCTION
Press the spray button to dampen the fabric before you start
ironing.
DRY IRONING
Use the same procedure as for steam ironing, but do not put
any water in the reservoir. Check that the temperature dial is at
“Min” before plugging in. Allow the iron to heat up according to
the table given below. Test the iron on a small piece of the item
to be ironed to make sure you have the right temperature.
AFTER USE
- Turn the temperature dial to “Min”.
- Unplug the iron and pour any remaining water away.
CLEANING
If the iron gets dirty or anything gets burnt onto it, scrub it with
a plastic scourer and then wipe with a cotton cloth. Do not
use a metal scourer. The rest of the iron can be wiped with a
slightly dampened cloth.
Do not immerse in any form of liquid!
STORAGE
- Allow the iron to cool down completely.
- Press the release button while pushing the handle down.
15
FOR UNITED KINGDOM ONLY
Plug wiring:
This product is fitted with a BS 1363 13-amp plug. If you have
to replace the fuse, only those that are ASTA or BSI approved
to BS1362 and with a rated current of 13 amps should be used.
If there is a fuse cover fitted, this cover must be refitted after
changing the fuse.
If the fuse cover is lost or damaged, the plug must not be used.
You must also check if the socket outlets in your home fit with
the plug of the appliance. If the socket outlet in your home does
not fit with the plug, the plug must be removed and disposed of
safely as insertion of the plug into the socket is likely to cause
electric hazard. A replacement plug should be wired according
to following description.