509019
34
Zoom out
Zoom in
Previous page
1/59
Next page
•A beep is heard and the number 0 flashes on the display.
Shortly afterwards, the armband is pumped up to 185
mmHg, while the pressure is continuously shown on the
display. The blood pressure monitor buzzes while the
armband is being pumped up.
•When the armband is pumped up to 185 mmHg, the
displayed figure falls again and the blood pressure
reading starts. The blood pressure monitor emits a
number of beeps while the reading is being taken. The
pulse is also measured, and the pulse symbol (c) is shown
on the display. The armband is automatically pumped up
if the pressure is too low.
Once the blood pressure reading has been taken, a long
beep is heard and the display shows the systolic pressure
(a), the diastolic pressure (b), the pulse (g) and the time.
There is also a symbol for the range the measured blood
pressure falls under: hypotension (k), normal (l), high
normal (m) or hypertension (n). The results are shown on
the display for around 3 minutes and then deleted. You
can also delete them by pressing the I/O/Start button
again.
If you need to take several readings, you should wait 5-10
minutes between each reading.
Please note! An individual reading says nothing about
your state of health. You can only get an idea of this after
a number of readings.
Storing blood pressure readings
The blood pressure monitor can store 80 blood pressure
readings in two groups of 40 readings. Once you have
taken a blood pressure reading and the results are shown
on the display, you can press the M1 button to save the
reading in group 1 or M2 to save the reading in group 2.
The display shows MEMO, a beep is heard and the
reading is saved.
Displaying saved blood pressure readings
Press the M1 button to display the saved blood pressure
readings in group 1 or the M2 button to display the saved
blood pressure readings in group 2.
The first reading in the selected group is displayed for
approximately 4 seconds. The display shows all the data
for the reading plus the reading number (j).
Press M1/M2 repeatedly to display the subsequent
readings in the selected group. Press and hold the button
to scroll through the readings. The reading number is
always displayed.
The blood pressure monitor automatically changes back
to the time display. If required, press the T button to
change back more rapidly.
34
AK-3000_IM6 02/03/05 9:33 Side 34
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melissa 630-011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melissa 630-011 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info