508302
32
Zoom out
Zoom in
Previous page
1/41
Next page
32
8. Place a hand on the lid and switch
on the appliance by turning the on/
off button to the desired speed.
o ”1”islowspeedand”2”ishigh
speed.
9. Theappliancealsohasapulsing
optionwithextraspeed.
o TurntheOn/Offbuttonto
“P”andholditbrieyinthat
position.
o Whenyoureleasethebutton,it
revertsto“0”andtheappliance
stops.
10.Youcanaddmorefoodtothe
blender jug during operation by
removing the lid cap and adding the
foodthroughtheopening.Always
switch off the appliance before
removing the plug and adding more
food.
11.Turnofftheappliancebyturning
theOn/Offbuttonto“0”whenyou
havenishedblending.Waituntil
the blade has come to a complete
stop before removing the lid.
12.Removetheblenderjugbyturning
it anti-clockwise and lifting it out.
13.Thelterelementcanbeturned
to three different positions when
you are pouring from the blender
jug: completely open, completely
closedandlteredopening(seethe
symbols on the element).
NOTE:
• Donotleavetheappliancerunning
formorethan3minutesatatime.
Waitfor1minutebeforeturningthe
appliance back on again.
• Alwaysaddliquidtotheblenderjug
when crushing ice cubes.
• Thehandleoftheblenderjugcan
be removed during cleaning. Press
the handle down so it comes loose
fromthejugandremoveit.The
handle is installed again by pushing
the white pin back into the hole in
the bottom of the blender jug and
pushing the handle upwards.
Assembling and using the grinder
Thegrinderisintendedforgrinding
coffee beans and chopping nuts.
1. Placethemotorsectiononalevel
surface, e.g. a kitchen counter, and
makesureitisstandingrmlyon
the four suction cups underneath.
2. Placefoodinthegrinder(19).
o NOTE:Donotcompletelyll
the grinder.
3. Makesurethatthesiliconering
isttedinthebladeunitforthe
grinder(18).
4. Fit the blade unit on the grinder and
tighten.
5. Place the assembled grinder onto
the motor section and turn the
grinder clockwise until it clicks into
place.(Seearrowsandlocking
symbol on the motor part).
6. Connecttheappliance.
7. Switchontheappliancebyturning
the on/off button and keep turning
until you reach the required speed.
o ”1”islowspeedand”2”ishigh
speed.
8. Turnofftheappliancebyturning
theOn/Offbuttonto“0”whenyou
havenishedusingthegrinder.
9. Remove the grinder by turning it
anti-clockwise and lifting it out.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melissa 16190009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melissa 16190009 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info