509043
19
Zoom out
Zoom in
Previous page
1/29
Next page
18 19
18 19
KEY TO MAIN COMPONENTS OF THE
APPLIANCE
1. Motor section
2. Drive shaft
3. Safety lock
4. Lockpinsforplasticbowl
5. Suctioncupfeet
6. On/Off button
7. Cord with plug
8. Lidforblenderfunction
9. Safety lock pin
10. Plastic bowl
11. Blade for blender function
12. Tamper
13.Lidforgraterfunction
14. Grater attachment
15.Attachmentholderpin
16.Attachmentholder
17. Blade (grate/slice function)
18. Blade (grate/shred function)
19. Drive shaft port
20. Filling port
21. Spout
PRIOR TO FIRST USE
• Readthroughthesafetyinstructions
carefully.
• Beforeusingforthersttime,orafter
prolonged storage without use, wash
any parts that will come into contact
with food.
USING THE APPARATUS
1. Placethemotorsection(1)onaat
surface, e.g. a kitchen counter, and
makesureitstandsrmlyonthefour
suctioncupfeet(5)underneath.
2. Place the plastic bowl (10) down onto
the drive shaft of the motor section (2),
sothatthedriveshafttsintotheport
(19).
oMakesurethatthetwopartst
together properly. There should be
no gap between the bottom of the
bowl and the motor section.
o Turn the plastic bowl
counterclockwise so that the lock
pins (4) click into place and hold
it fast.
3. Fit the selected blender or grater
function components as described
below.
Use of blender function
1. Make sure that
the On/Off
button (6) is
set to “0” (off).
2. Mount the
blender
function blade
(11) onto the
drive shaft in
the middle
of the plastic
bowl. Make
sure that it is
pressed down as far as it will go.
3. Addfoodstuffstothebowl–onlyllthe
bowl approximately two-thirds full.
4. Place the lid (8) on the appliance, and
turn counterclockwise, so that the pin
(9) clicks into place in the safety lock
(3).
oMakesurethatthelidtstightly.
oNOTE:Thesafetylockensuresthat
the appliance cannot be turned on
if the lid or the safety lock pins are
notttedcorrectly.
5. Inserttheplug(7)inthemainssocket
and switch on the power.
6. Switch on the apparatus by switching
the on/off button to one of the following
settings:
o "CHOP" (lowest speed)
o"SLICE/SHRED"(highestspeed)
o"GRIND"(theapplianceonlyruns
as long as the On/Off button is held
at this setting).
7. Turn off the appliance by turning the
On/Off button to “o” and remove the
plug from the socket.
8. Wait until the blade has come to a
complete stock before removing the lid.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melissa 146-007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melissa 146-007 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info