507938
15
Zoom out
Zoom in
Previous page
1/24
Next page
USE
Filling with water (for steam ironing)
Setting the temperature
Select the required iron temperature
using the thermostat knob:
Wool, silk
Nylon
Cotton or linen
Place the steam iron on its end, so it
stands upright. Plug in and switch the
power on.
Do not start ironing until the indicator
light (5) goes out. The indicator light
switches on and off during ironing,
as the thermostat regulates the
temperature of the steam iron.
If you turn the temperature up using
the thermostat button, you should not
start to iron until the indicator light
goes out.
Steam ironing
Steam ironing is only possible at high
temperatures. Do not use steam ironing
when the thermostat knob is at position
rom the
soleplate, because the steam iron is not
hot enough to convert all the water to
steam.
Check that there is sufficient water in
the reservoir.
Set the thermostat knob to the
requir .
Plug in. Start ironing when the
thermostat light goes out.
pressed, it is equivalent to setting the
steam ironing function to "off" mode.
Then there is no steam released from
the sole plate.
original position. This is
the steam ironing function to "on" mode.
Then the steam will be continuously
released from the sole plate.
Dry ironing
You dry iron in the same way as you
steam iron, except the steam setting
selection knob must be in position 0.
Tips!
Always stand the iron upright if you
take a break from ironing!
Always iron synthetic fabrics and silk
on the reverse. This avoids shiny spots
on the fabric.
Wool products (100% wool) may be
pressed when the steam iron is set to
steam position. We recommend using
the setting for maximum steam, with a
layer of dry fabric between the steam
iron and the item to be ironed.
15
Make sure that the steam iron is
unplugged from the electrical outlet.
Make sure that the steam button +
temperature button is in position MIN
before filling with water.
Fill water in the water tank through the
water tank lid, until the water reached
the max mark indicated on the side of
the iron. Never fill above this mark.
Pour out the remaining water after use.
Do not use chemically descaled water.
KEY
1. Spout for water filling
2. Knob for selecting the steam setting
3. Handle
4. Cord
5. Indicator light
6. Thermostat knob
7. Soleplate
8. Mark for maximum water level
PRIOR TO FIRST USE
Remove the protective film from the
soleplate (7).
Some parts of the steam iron were
oiled during manufacture and these
will therefore smoke slightly when the
iron is first used. This is entirely safe,
and the smoke will disappear once the
steam iron has been used a few times.
Test it on a piece of material or similar
before using it on clothes.
1. 2.
3.
4.
5.
6.
7.
8.
equivalent to setting
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melissa 141003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melissa 141003 in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info