122407
4
Zoom out
Zoom in
Previous page
1/6
Next page
You can also use the TV - VCR - SAT - DVD selection buttons for different appliances.
See the table below.
used communicates the code by
flashing the three numbers separately.
Count the number of flashes for each
code number. For example, for the
code 306, the button flashes three,
zero and six times to give:
= 3
= 0
= 6
5.
Note this code on the label inside the
battery cover, for rapid consultation.
+
NOTING THE PROGRAMMED CODE
To find the code for your remote control:
1.
Press one of the TV - VCR - SAT - DVD
selection buttons for the appliance
whose code you want to identify.
2.
Hold down the SHIFT and ON/OFF
buttons together until the TV - VCR -
SAT - DVD selection buttons start to
flash.
3.
Release the SHIFT and ON/OFF
buttons and then press and release
the 1-/— button.
4.
After a few seconds, the TV - VCR -
SAT - DVD/AUX selection button you
USING THE ADDITIONAL COMMANDS WHICH DO NOT
APPEAR ON THE KEYPAD
Although not indicated on the keypad, some buttons can be used for additional commands.
1. Use your Universal 4 remote control to find them by pressing the following buttons one by
one:
2. The most frequently used additional commands like MENU SCROLL – COLOUR –
BRIGHTNESS and NORMALISATION are located as follows:
normalisation
menu (up) menu (up) + brightness (-) red brightness (-) + red
menu (down) menu (down) + brightness (+) green brightness (+) + green
menu (right) menu (right) + color (-) yellow color (-) + yellow
menu (left) menu (left) + color (+) blue color (+) + blue
USING THE REMOTE CONTROL WITH MORE THAN ONE
APPLIANCE OF THE SAME TYPE
VOLUME CONTROL AVAILABLE AT ALL TIMES
If you have programmed the Universal 4 remote control for the TV using
the TV selection button and for the VCR using the VCR selection button,
you can raise or lower the TV volume or use the mute function while watching
the VCR without having to press the TV selection button.
1-/--
2-
MENU
OK AV
-
OK
SHIFT
1-/--
TV
DVD
SAT
VCR
TV
VCR
SAT
DVD
BUTTONS
APPLIANCES
TV VCR SAT DVD
√√
√√√√
√√√√
√√√√
In this way, you can obtain all the
combinations required, simply program
the remote control as follows:
Always write down the 3-digit code for your remote control on the label inside the
battery cover after running the search and saving the code.
This may be useful if you need to reprogram your remote control in the event of
accidental cancellation or when you change used batteries.
If you forget to write down the code or use the remote control programming
procedures A or C ... don’t worry!
1.
One at a time, search for the codes
for each appliance, following any
of the programming procedures
A , B or C described above.
2.
Make a note of the various
appliance codes.
3.
Enter the codes, following the
programming procedure B
from point 3 and assign the
appliances to the selection
buttons as you like.
P
+
P
-
+
-
P
+
P
-
+
-
SHIFT
SHIFT
SHIFT
SHIFT
SHIFT
SHIFT
SHIFT
4


Need help? Post your question in this forum.

Forumrules
1

Forum

meliconi-universal-4

Reset search

  • Please iam using Humax decoder what is my three code I can not find it Submitted on 10-8-2020 at 22:08

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi universal 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi universal 4 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info